RESUMEN
Climate change and increasing demography press local authorities to look after affordable water resources and replacement of drinking water for city necessities like street and pavement cleaning by more available raw water. Though, the substitution of drinking by non-drinking resources demands the evaluation of sanitary hazards. This article aims therefore to evaluate the contribution of cleaning water to the overall exposure of city dwellers in case of wet pavement cleaning using crossed physical, chemical and biological approaches. The result of tracer experiments with fluorescein show that liquid water content of the cleaning aerosol produced is about 0.24 g m(-3), rending possible a fast estimation of exposure levels. In situ analysis of the aerosol particles indicates a significant increase in particle number concentration and particle diameter, though without change in particle composition. The conventional bacterial analysis using total coliforms as tracer suggests that an important part of the contamination is issued from the pavement. The qPCR results show a more than 20-fold increase of background genome concentration for Escherichia coli and 10-fold increase for Enterococcus but a negligible contribution of the cleaning water. The fluorescence analysis of the cleaning aerosol confirms the above findings identifying pavement surface as the major contributor to aerosol organic load. The physical, chemical and microbiological approaches used make it possible to describe accurately the cleaning bioaerosol and to identify the existence of significantly higher levels of all parameters studied during the wet pavement cleaning. Though, the low level of contamination and the very short time of passage of pedestrian in the zone do not suggest a significant risk for the city dwellers. As the cleaning workers remain much longer in the impacted area, more attention should be paid to their chronic exposure.
Asunto(s)
Aerosoles , Contaminantes Atmosféricos/análisis , Contaminación del Aire/estadística & datos numéricos , Exposición a Riesgos Ambientales/estadística & datos numéricos , Peatones , Contaminación del Agua/análisis , Contaminación del Agua/estadística & datos numéricosRESUMEN
Impingement of droplets on surfaces occurs in many industrial and natural processes. The study of droplet break-up is fundamental in order to determine the potential sources of airborne contamination for scenarios of hazardous liquid falls such as dripping. There are very few data in the literature describing the case of impact of millimetre-size droplets. The purposes of this work were to study experimentally particle emission during the impact of droplets on a liquid film and to assess the use of coalescence/splash relations to predict airborne particle release. The results are described using dimensionless numbers taking into account the inertial, viscosity and surface tension forces. Experiments were carried out for Weber numbers between 62 and 1754 and for Ohnesorge numbers between 2.0×10(-3) and 1.5×10(-2). New results on coalescence/splash thresholds are obtained using highly sensitive aerosol measurement and allow a prediction concerning the presence or absence of airborne particles according to a threshold relation. Moreover, we propose a modification of the Cossali et al.'s relation in order to describe the coalescence/prompt splash threshold.
Asunto(s)
Material Particulado/análisis , Tamaño de la Partícula , Propiedades de Superficie , Tensión SuperficialRESUMEN
An alpha spectrometer including a semi-conductor detector is commonly used for measurements of the emergent alpha particles from an air filter, on which was sampled a radioactive aerosol. The alpha spectrometry and the detection efficiency are necessary input information for real radioactivity measurements. The MCNPX code based on the Monte Carlo method has been applied to simulate the detection process in order to obtain spectrum peaks and determine the detection efficiency for modeled geometry. First simulations with MCNPX have been carried out in order to validate the alpha particle energy spectrometry of an electrodeposited solid source and an initial simulated filter model. Furthermore, to improve our first filter model, the real spatial distribution of radioactive aerosols across the filter thickness, found experimentally, is taken into account in a multi-layer filter model. Such an alpha particle distribution allows achieving an adequate simulation of the filter. Comparison between measured and simulated alpha spectra highlights the good agreement in spectral parameters and in detection efficiency even under different aerosol spatial distributions inside the volume of the filter.