RESUMEN
Tin monoxide (SnO) is a promising oxide semiconductor which is appealing for a wide range of applications from channel materials in p-type field effect transistors (FET) to electrode materials searched for next-generation batteries. For the controlled growth of SnO films at low temperatures, atomic layer deposition (ALD) is employed in this study, where the choice of the precursor plays a significant role. A comparative thermal evaluation of four different amidinate-based tin(II) precursors and the influence of the ligand sphere on their physicochemical properties revealed that bis(N,N'-diisopropylformamidinato tin(II) (1) possesses the required volatility, good thermal stability and sufficient reactivity towards water, to be implemented as the ALD precursor. The water-assisted ALD process resulted in crystalline SnO films on Si substrates with a growth per cycle (GPC) of 0.82 Å at temperatures as low as 140 °C. By employing complementary analytical tools, namely, X-ray diffraction (XRD), atomic force microscopy (AFM), X-ray reflectivity (XRR), Rutherford backscattering spectrometry/nuclear reaction analysis (RBS/NRA) and X-ray photoelectron spectroscopy (XPS), the formation of tin monoxide was confirmed. Finally, the optical properties of the as-deposited films were analyzed via UV-Vis spectroscopy, exhibiting a band gap of 2.74 eV, which further confirms the formation of the targeted SnO phase.
RESUMEN
The combined atomic/molecular layer deposition (ALD/MLD) technique is emerging as a state-of-the-art synthesis route for new metal-organic thin-film materials with a multitude of properties by combining those of the inorganic and the organic material. A major part of the studies so far reported have focused on aluminum or zinc alkyls, so-called alucone and zincone films, typically grown from trimethyl aluminum (TMA) or diethyl zinc (DEZ) as the metal-bearing precursor, and a simple aliphatic bi-functional alcohol molecule such as ethylene glycol (EG) as the organic precursor. However, these common precursors possess certain disadvantages: both TMA and DEZ are pyrophoric, DEZ being additionally thermally unstable, while EG has a strong tendency for various unideal reaction modes. Here we report novel ALD/MLD processes for alucone and zincone films based on non-pyrophoric bis-diisopropylamido-[3-(N,N-dimethylamino)propyl] aluminum(III) [Al(NiPr2)2(DMP)] and bis-3-(N,N-dimethylamino)propyl zinc(II) [Zn(DMP)2] precursors in combination with hydroquinone (HQ) as the organic precursor. We demonstrate that the [Al(NiPr2)2(DMP)] + HQ and [Zn(DMP)2] + HQ ALD/MLD processes work even at record low deposition temperatures (140 °C and 60 °C, respectively) yielding high-quality and relatively stable Al-HQ and Zn-HQ thin films with appreciably high growth rates (2.8 Å / cycle and 3.2 Å / cycle, respectively). Moreover, these ALD/MLD processes are compatible with the corresponding ALD processes, i.e. [Al(NiPr2)2(DMP)] + H2O and [Zn(DMP)2] + H2O, for the Al2O3 and ZnO films, thus opening up new horizons for the fabrication of novel metal-oxide : organic superlattice structures for e.g. flexible gas-barrier coatings or wearable thermoelectrics.
RESUMEN
We present a new type of atomic layer deposition (ALD) process for intermetallic thin films, where diethyl zinc (DEZ) serves as a coreactant. In our proof-of-concept study, FeCl3 is used as the second precursor. The FeCl3 + DEZ process yields in situ crystalline Fe4Zn9 thin films, where the elemental purity and Fe/Zn ratio are confirmed by time-of-flight elastic recoil detection analysis (TOF-ERDA), Rutherford backscattering spectrometry (RBS), atomic absorption spectroscopy (AAS), and energy-dispersive X-ray spectroscopy (EDX) analyses. The film thickness is precisely controlled by the number of precursor supply cycles, as expected for an ALD process. The reaction mechanism is addressed by computational density functional theory (DFT) modeling. We moreover carry out preliminary tests with CuCl2 and Ni(thd)2 in combination with DEZ to confirm that these processes yield Cu-Zn and Ni-Zn thin films with DEZ as well. Thus, we envision an opening of a new ALD approach based on DEZ for intermetallic/metal alloy thin films.
RESUMEN
An atomic/molecular layer deposition (ALD/MLD) process for the fabrication of cerium-based metal-organic hybrid films is demonstrated for the first time. The highly reactive cerium(III) guanidinate precursor [Ce(dpdmg)3] was employed in combination with organic precursors composed of rigid backbones, terephthalic acid (TPA) and hydroquinone (HQ) for the growth of the respective hybrid films. Growth rates of the films as high as 5.4 Å per cycle for Ce-TPA and 4.8 Å per cycle for Ce-HQ at a deposition temperature of 200 °C were obtained. Density functional theory (DFT) investigations confirm the favorable interaction between the cerium precursor and the organic co-reactants and predict that Ce maintains its +3 oxidation state in the films. This was also confirmed experimentally by X-ray photoelectron spectroscopy (XPS). Additionally, the films are highly UV absorbing. Hence, we envision that these films could find future application as promising redox active materials and/or UV absorbing materials.
RESUMEN
Curcumin is known as a biologically active compound and a possible antimicrobial agent. Here, we combine it with TiO2 and ZnO semiconductors, known for their photocatalytic properties, with an eye towards synergistic photo-harvesting and/or antimicrobial effects. We deposit different nanoscale multi-layer structures of curcumin, TiO2 and ZnO, by combining the solution-based spin-coating (S-C) technique and the gas-phase atomic layer deposition (ALD) and molecular layer deposition (MLD) thin-film techniques. As one of the highlights, we demonstrate for these multi-layer structures a red-shift in the absorbance maximum and an expansion of the absorbance edge as far as the longest visible wavelength region, which activates them for the visible light harvesting. The novel fabrication approaches introduced here should be compatible with, e.g., textile substrates, opening up new horizons for novel applications such as new types of protective masks with thin conformal antimicrobial coatings.
Asunto(s)
Curcumina/química , Semiconductores , Titanio/química , Óxido de Zinc/química , Antibacterianos , Antiinfecciosos/química , Catálisis , Química Farmacéutica/métodos , Ensayo de Materiales , Nanoestructuras/química , Fotoquímica/métodos , Espectroscopía Infrarroja por Transformada de Fourier , Propiedades de Superficie , Textiles , Difracción de Rayos XRESUMEN
Owing to the limited availability of suitable precursors for vapor phase deposition of rare-earth containing thin-film materials, new or improved precursors are sought after. In this study, we explored new precursors for atomic layer deposition (ALD) of cerium (Ce) and ytterbium (Yb) containing thin films. A series of homoleptic tris-guanidinate and tris-amidinate complexes of cerium (Ce) and ytterbium (Yb) were synthesized and thoroughly characterized. The C-substituents on the N-C-N backbone (Me, NMe2 , NEt2 , where Me=methyl, Et=ethyl) and the N-substituents from symmetrical iso-propyl (iPr) to asymmetrical tertiary-butyl (tBu) and Et were systematically varied to study the influence of the substituents on the physicochemical properties of the resulting compounds. Single crystal structures of [Ce(dpdmg)3 ] 1 and [Yb(dpdmg)3 ] 6 (dpdmg=N,N'-diisopropyl-2-dimethylamido-guanidinate) highlight a monomeric nature in the solid-state with a distorted trigonal prismatic geometry. The thermogravimetric analysis shows that the complexes are volatile and emphasize that increasing asymmetry in the complexes lowers their melting points while reducing their thermal stability. Density functional theory (DFT) was used to study the reactivity of amidinates and guanidinates of Ce and Yb complexes towards oxygen (O2 ) and water (H2 O). Signified by the DFT calculations, the guanidinates show an increased reactivity toward water compared to the amidinate complexes. Furthermore, the Ce complexes are more reactive compared to the Yb complexes, indicating even a reactivity towards oxygen potentially exploitable for ALD purposes. As a representative precursor, the highly reactive [Ce(dpdmg)3 ] 1 was used for proof-of-principle ALD depositions of CeO2 thin films using water as co-reactant. The self-limited ALD growth process could be confirmed at 160 °C with polycrystalline cubic CeO2 films formed on Si(100) substrates. This study confirms that moving towards nitrogen-coordinated rare-earth complexes bearing the guanidinate and amidinate ligands can indeed be very appealing in terms of new precursors for ALD of rare earth based materials.
RESUMEN
Two series of ZnO-organic superlattice thin films are fabricated with systematically controlled frequencies of monomolecular hydroquinone (HQ) or terephthalic acid (TPA) based organic layers within the ZnO matrix using the atomic/molecular layer deposition (ALD/MLD) technique. The two different organic components turn the film orientation to different directions and affect the electrical transport properties differently. While the TPA layers enhance the c-axis orientation of the ZnO layers and act as electrical barriers depressing the electrical conductivity even in low concentrations, adding the HQ layers enhances the a-axis orientation and initially increases the carrier concentration, effective mass, and electrical conductivity. The work thus demonstrates the intriguing but little exploited role of the organic component in controlling the properties of the inorganic matrix in advanced layer-engineered inorganic-organic superlattices.
RESUMEN
In the present paper, successful preparation of ZnAl layered double hydroxides (LDHs) containing bis-tetrazole anions with both typical and interstratified arrangements is reported. The mechanism of the single-anion interstratified arrangement remains a long-standing and overwhelming challenge in the chemistry of LDHs. To address this issue, the arrangement of layers, the positioning of anions in the interlayer space, and the cationic ratio of layers were studied by the application of a series of laboratory methods including X-ray diffraction (XRD), thermal analyses (TGA, DTG, and DTA), elemental analysis (CHN), and energy dispersive X-ray (EDX) methods, together with computer simulations performed by using Dmol3, Forcite, and Reflex modules. The obtained information demonstrated the dependence of interstratification on the type, size, and charge distribution of the intercalated anions, and the cationic ratio of the LDH layers. At the end, a new comprehensive mechanism is proposed for single-anion interstratification in layered double hydroxides by considering the results of this research study and other related works.