RESUMEN
BACKGROUND: There is continuing debate about the ideal philosophy for component alignment in TKA. However, there are limited long-term functional and radiographic data on randomized comparisons of kinematic alignment versus mechanical alignment. QUESTIONS/PURPOSES: We present the 10-year follow-up findings of a single-center, multisurgeon randomized controlled trial (RCT) comparing these two alignment philosophies in terms of the following questions: (1) Is there a difference in PROM scores? (2) Is there a difference in survivorship free from revision or reoperation for any cause? (3) Is there a difference in survivorship free from radiographic loosening? METHODS: Ninety-nine patients undergoing primary TKA for osteoarthritis were randomized to either the mechanical alignment (n = 50) or kinematic alignment (n = 49) group. Eligibility for the study was patients undergoing unilateral TKA for osteoarthritis who were suitable for a cruciate-retaining TKA and could undergo MRI. Patients who had previous osteotomy, coronal alignment > 15° from neutral, a fixed flexion deformity > 15°, or instability whereby constrained components were being considered were excluded. Computer navigation was used in the mechanical alignment group, and patient-specific cutting blocks were used in the kinematic alignment group. At 10 years, 86% (43) of the patients in the mechanical alignment group and 80% (39) in the kinematic alignment group were available for follow-up performed as a per-protocol analysis. The PROMs that we assessed included the Knee Society Score, Oxford Knee Score, WOMAC, Forgotten Joint Score, and EuroQol 5-Dimension score. Kaplan-Meier analysis was used to assess survivorship free from reoperation (any reason) and revision (change or addition of any component). A single blinded observer assessed radiographs for signs of aseptic loosening (as defined by the presence of progressive radiolucent lines in two or more zones), which was reported as survivorship free from loosening. RESULTS: At 10 years, there was no difference in any PROM score measured between the groups. Ten-year survivorship free from revision (components removed or added) likewise did not differ between the groups (96% [95% CI 91% to 99%] for the mechanical alignment group and 91% [95% CI 83% to 99%] for the kinematic alignment group; p = 0.38). There were two revisions in the mechanical alignment group (periprosthetic fracture, deep infection) and four in the kinematic alignment group (two secondary patella resurfacings, two deep infections). There was no statistically significant difference in reoperations for any cause between the two groups. There was no difference with regard to survivorship free from loosening on radiographic review (χ2 = 1.3; p = 0.52) (progressive radiolucent lines seen at 10 years were 0% for mechanical alignment and 3% for kinematic alignment). CONCLUSION: Like the 2-year and 5-year outcomes previously reported, 10-year follow-up for this RCT demonstrated no functional or radiographic difference in outcomes between mechanical alignment and kinematic alignment TKA. Anticipated functional benefits of kinematic alignment were not demonstrated, and revision-free survivorship at 10 years did not differ between the two groups. Given the unknown long-term impact of kinematic alignment with regard to implant position (especially tibial component varus), we must conclude that mechanical alignment remains the reference standard for TKA. We could not demonstrate any advantage to kinematic alignment at 10-year follow-up. LEVEL OF EVIDENCE: Level I, therapeutic study.
RESUMEN
BACKGROUND: Cementless total knee arthroplasty (TKA) is the subject of renewed interest. Previous concerns about survivorship have been addressed and there is an appeal in terms of biological fixation and surgical efficiency. However, even surgeon advocates have concerns about the risk of marked subsidence when using this technology in older patients at risk for osteoporosis. METHODS: This was a retrospective analysis of 1,000 consecutive fully cementless mobile bearing TKAs performed at a single institution on women over 75 years of age who had postoperative and 1-year x-rays. The primary outcome was the incidence of subsidence. RESULTS: There were three asymptomatic cases with definite subsidence and change in alignment. In a fourth symptomatic case, the femoral component subsided into varus and the tibia into valgus, thus maintaining alignment which facilitated nonoperative treatment in a 92-year-old. Overall, at 1 year, there were two- liner revisions for infection without recurrence. Five patients had further surgery, of which three were washouts and two were for periprosthetic fractures sustained postoperatively within 1 year. Seven patients had further anesthesia, of which five were manipulations and two were nonrecurrent closed reductions for spinouts. CONCLUSION: Cementless TKA did not have a high risk of subsidence in this at-risk population. In the hands of experienced surgeons, these procedures can be used safely irrespective of bone quality.
Asunto(s)
Artroplastia de Reemplazo de Rodilla , Prótesis de la Rodilla , Humanos , Femenino , Anciano , Anciano de 80 o más Años , Artroplastia de Reemplazo de Rodilla/efectos adversos , Estudios Retrospectivos , Prótesis de la Rodilla/efectos adversos , Tibia/cirugía , Radiografía , Reoperación , Resultado del TratamientoRESUMEN
PURPOSE: The aim of this study was to identify if experience in arthroscopy confers ambidexterity to the operator and the role of baseline characteristics in arthroscopic simulator performance. METHODS: A prospective comparative study was carried out across four regional Orthopaedic training centres. Participants were divided into novice, intermediate or experienced groups based on arthroscopic experience. Baseline demographics including age, sex, handedness, and gaming history were also collected. Following familiarisation with the procedure, participants were asked to complete a simulated task requiring bimanual control consisting of visualisation with camera control and manipulation of highlighted objects using a grasping instrument. One attempt using camera control and grasping accuracy per hand was performed by each participant, with scores for each hand collected for analysis. Performance scores for camera alignment, camera path length, grasper path length and grasping efficiency were collected. Time taken to completion was also noted for each attempt. RESULTS: Fifty-six participants were recruited to the study. A significant difference in grasping efficiency between groups in the dominant hand was demonstrated (p = 0.013). Novices demonstrated laterality with superior performance in grasping efficiency in the dominant hand (p = 0.001). No significant difference was noted between dominant and non-dominant hand performance in the experienced group. CONCLUSION: Arthroscopic simulation-based training is a valuable learning tool for orthopaedic training. This study demonstrated that experienced orthopaedic surgeons have a greater degree of ambidexterity than intermediate or novice groups, hypothesised by authors to be conferred through conventional orthopaedic training. Dedicated bimanual control tasks to reduce laterality in trainees should be incorporated in simulated surgical curricula. LEVEL OF EVIDENCE: III.
Asunto(s)
Ortopedia , Entrenamiento Simulado , Artroscopía/educación , Competencia Clínica , Simulación por Computador , Humanos , Ortopedia/educación , Estudios Prospectivos , Entrenamiento Simulado/métodos , Análisis y Desempeño de TareasRESUMEN
INTRODUCTION: COVID-19 was declared a pandemic in March 2020. With the sudden surge in demand for personal protective equipment (PPE), significant concerns regarding the ongoing availability emerged. One solution proposed is re-sterilisation of respirator masks and this has been commenced in some parts of the world. On review of the literature, very little is documented regarding the knowledge of masks and the attitudes of healthcare workers towards using re-sterilised masks. METHODS: A comprehensive questionnaire was used to assess general knowledge and attitudes around facemasks and respirators. RESULTS: There were 190 respondents. There were significant gaps in knowledge and understanding of when particular face masks should be worn. One-third had significant concerns about ongoing availability. One-third had concerns about the quality of the masks as the pandemic continued. Only 10% of respondents underwent formal face-fitting. Eighty percent of respondents stated they would wear a re-sterilised mask. A further 15% would use a re-sterilised mask but required certain reassurances. Five percent of our respondents would not use a re-sterilised mask under any circumstances. DISCUSSION: Ensuring an adequate understanding of face masks is crucial among healthcare workers (HCWs) and this study highlights a need for further education. It also demonstrates a general acceptability among HCWs towards the use of re-sterilised face masks.
Asunto(s)
COVID-19 , Máscaras , Actitud , Personal de Salud , Humanos , SARS-CoV-2 , EsterilizaciónRESUMEN
A 63-year-old woman was referred to the specialised knee revision clinic with ongoing knee pain after total knee replacement. She incidentally had cobalt and chromium levels measured. These were seen to be elevated. Comprehensive assessment and investigation did not identify any other source of cobalt or chromium. Aseptic loosening of the knee was diagnosed, and the knee was revised. At the time of surgery, the tissue was seen to be darkened consistent with metallosis. Multiple samples excluded infection on extended cultures. Aspirated fluid showed that periprosthetic fluid had elevated cobalt levels. The knee was successfully revised with good symptomatic outcome and significantly, over the course of several months post-revision, the cobalt and chromium levels returned to normal.
Asunto(s)
Artroplastia de Reemplazo de Rodilla , Prótesis de la Rodilla , Artroplastia de Reemplazo de Rodilla/efectos adversos , Cobalto , Femenino , Humanos , Articulación de la Rodilla/diagnóstico por imagen , Articulación de la Rodilla/cirugía , Prótesis de la Rodilla/efectos adversos , Persona de Mediana Edad , Dolor , Falla de Prótesis , ReoperaciónRESUMEN
BACKGROUND: The current pandemic has impacted heavily on health systems, making unprecedented demands on resources, and forcing reconfiguration of services. Trauma and orthopaedic units have cancelled elective surgery, moved to virtual based clinics and have been forced to reconsider the provision of trauma. Our national elective orthopaedic centre has been re-designated as a trauma centre to allow tertiary centres re-direct triaged trauma. Many governments, as part of their COVID-19 management, have significantly restricted activity of the general population. We proposed that trauma patterns would change alongside these changes and maintaining existing standards of treatment would require dedicated planning and structures. METHODS: Referrals over a six-week period (March 15th to April 30th) were retrospectively reviewed. Data was collected directly from our referral database and a database populated. Analysis was performed to assess trauma volume, aetiology, and changes in trends. RESULTS: There were one hundred and fifty-nine referrals from three individual hospitals within the timeframe. Mean age of patient's referred was 55 (range17-92). Males accounted for 45% of cases. F&A injuries were the most common (32%), followed by H&W (28%), UL (17%), H&F (16%) and K&T (7%). In comparison to the corresponding time-period in 2019, trauma theatre activity reduced by almost one half (45.3%) CONCLUSION: The majority of trauma referred to our Dublin based centre during COVID-19 related population restrictions appears to be home based and trauma volumes have decreased. Significant reductions are apparent in work and sport related injuries suggestive of compliance with COVID-19 activity guidelines. Maintaining existing standards of treatment requires dedicated planning.
Asunto(s)
Accidentes Domésticos/tendencias , COVID-19 , Heridas y Lesiones/epidemiología , Adolescente , Adulto , Anciano , Anciano de 80 o más Años , COVID-19/epidemiología , COVID-19/prevención & control , Femenino , Humanos , Irlanda/epidemiología , Masculino , Persona de Mediana Edad , Pandemias , Derivación y Consulta , Estudios Retrospectivos , Centros Traumatológicos/tendencias , Heridas y Lesiones/diagnóstico , Heridas y Lesiones/etiología , Adulto JovenRESUMEN
INTRODUCTION: With the emergence of the 2019 novel coronavirus and its resulting pandemic status in March 2020 all routine elective orthopaedic surgery was cancelled in our institution. The developing picture in Italy, of acute hospitals becoming overwhelmed with treating patients suffering with severe and life-threatening symptoms from the disease, prompted the orthopaedic surgeons to formulate a plan to transfer trauma patients requiring surgery to the elective hospital to unburden the acute hospital system. METHODS: Under the threat of this pandemic; protocols and algorithms were established for referral, acceptance and care of trauma patients from acute hospitals in the region. Each day, as new guidance on COVID-19 emerged, our process and algorithms were adjusted to reflect pertinent change. RESULTS: The screening of all patients referred, worked well in keeping our hospital "COVID-free" with respect to patients undergoing operations. An upward trend in cases referred reflected the decreased capacity in the acute hospitals due to rising cases of COVID-19 within the hospital network. During the first 7 weeks of the pandemic 308 operations were performed, (31.1% upper limb, 33.4% lower limb, 4.1% spine, 14.1% urgent elective, 17.4% plastic surgery cases). Regular review and audit of the activity in the hospital as well as communication with the referring teams enabled appropriate planning to accommodate the increase in case-mix as the need arose. DISCUSSION: This paper details the steps that were taken in planning for such a change in management specific to the orthopaedic surgery setting and the lessons learnt during this process. The success of the development of this pathway was facilitated by clear communication channels, flexibility to adapt to changing process and feedback from all stakeholders. The implementation of this pathway allowed the unburdening of acute hospitals dealing with the pandemic that was steadily reducing access to operating theatres and anaesthetic resources.
Asunto(s)
COVID-19/epidemiología , Gestión del Cambio , Procedimientos Ortopédicos , Derivación y Consulta/organización & administración , Heridas y Lesiones/cirugía , Algoritmos , Procedimientos Quirúrgicos Electivos , Humanos , Irlanda , Transferencia de Pacientes , Heridas y Lesiones/diagnóstico , Heridas y Lesiones/epidemiologíaRESUMEN
INTRODUCTION: The increasing incidence of acetabular fractures in the elderly and the fracture complexity seen in this cohort represents one of the greatest challenges faced by trauma orthopaedic surgeons today. There are no formal guidelines of best practice in the treatment of these patients. Management options vary from non-operative, acute ORIF, and/or total joint replacement. Although surgical intervention allows for earlier mobilization and avoidance of the complications of prolonged bedrest, the patients ability to tolerate what is often major surgery is always of concern. This is in stark contrast to intracapsular hip fractures, (a fracture within the same joint), where acute surgery is recommended in virtually all cases. OBJECTIVES: This study was undertaken to evaluate the peri-operative outcomes for geriatric patients undergoing acetabular ORIF and hemiarthroplasty to assess if there is a significant difference in early outcome parameters. DESIGN: This is a retrospective case-control study. SETTING: This study was performed in the National Centre for Pelvic and Acetabular surgery. PATIENTS: 42 age- and sex-matched patients with comparable ASA grades were included in each arm of the study. Patient selection in the acetabular ORIF group was consecutive patients managed operatively in the centre during the period 2010-2015. The selection for the hemiarthroplasty group was by random selection of age- and sex-matched patients undergoing hemiarthroplasty during the same period. MAIN OUTCOME MEASUREMENTS: The primary outcomes that were proposed prior to the study being performed was perioperative mortality and post-op complications. Secondary outcomes were operating times, blood loss and need for ICU admission. RESULTS: A significant difference between the two cohorts was observed with operative times, blood loss, need for transfusion, and need for ICU admission, all higher in the acetabular ORIF group. There was no significant difference in mortality or post-op infection. CONCLUSIONS: Our paper supports the concept that acute ORIF of acetabular fractures, with appropriate peri-operative support, can be undertaken safely. There is no difference in the major peri-operative outcomes of mortality or infection when compared with hip fracture patients requiring hemiarthroplasty.
Asunto(s)
Acetábulo/lesiones , Fijación Interna de Fracturas , Fracturas Óseas/cirugía , Reducción Abierta , Acetábulo/cirugía , Anciano , Anciano de 80 o más Años , Estudios de Casos y Controles , Femenino , Estudios de Seguimiento , Fracturas Óseas/mortalidad , Hemiartroplastia , Fracturas de Cadera/mortalidad , Fracturas de Cadera/cirugía , Humanos , Masculino , Análisis por Apareamiento , Complicaciones Posoperatorias/epidemiología , Complicaciones Posoperatorias/etiología , Complicaciones Posoperatorias/prevención & control , Estudios Retrospectivos , Resultado del TratamientoRESUMEN
AIM: To establish the mode of failure of primary total hip replacement in patients under 50 years old. METHODS: A total of 1062 revision total hip arthroplasties were performed over a 5-year period, with 146 on patients under 50 years old. These were subdivided into early (< 5 years) and late (> 5 years) failures from the index procedure. RESULTS: The commonest mechanism of failure was aseptic loosening (42.3%) followed by metal-on-metal failure (15.8%), infection (14.4%) and instability (9.6%). The commonest cause of early revision surgery was due to metal-on-metal failure (27.8%) followed by aseptic loosening (19.7%) and infection (18.4%). In the late revision group, the main cause of failure was aseptic loosening (64%) and infection (10.7%). CONCLUSION: The changing trend of early revision due to metal-on-metal failure is important to recognise. Continuous review of the mechanism of primary total hip replacement failure is necessary to ensure the best patient outcome and maximise implant survivorship.
Asunto(s)
Artroplastia de Reemplazo de Cadera/efectos adversos , Falla de Prótesis/tendencias , Adolescente , Adulto , Artroplastia de Reemplazo de Cadera/métodos , Femenino , Humanos , Masculino , Persona de Mediana Edad , Adulto JovenRESUMEN
This study compares energy spectra of the multiple electron beams of individual radiotherapy machines, as well as the sets of spectra across multiple matched machines. Also, energy spectrum metrics are compared with central-axis percent depth-dose (PDD) metrics. METHODS: A lightweight, permanent magnet spectrometer was used to measure energy spectra for seven electron beams (7-20 MeV) on six matched Elekta Infinity accelerators with the MLCi2 treatment head. PDD measurements in the distal falloff region provided R50 and R80-20 metrics in Plastic Water® , which correlated with energy spectrum metrics, peak mean energy (PME) and full-width at half maximum (FWHM). RESULTS: Visual inspection of energy spectra and their metrics showed whether beams on single machines were properly tuned, i.e., FWHM is expected to increase and peak height decrease monotonically with increased PME. Also, PME spacings are expected to be approximately equal for 7-13 MeV beams (0.5-cm R90 spacing) and for 13-16 MeV beams (1.0-cm R90 spacing). Most machines failed these expectations, presumably due to tolerances for initial beam matching (0.05 cm in R90 ; 0.10 cm in R80-20 ) and ongoing quality assurance (0.2 cm in R50 ). Also, comparison of energy spectra or metrics for a single beam energy (six machines) showed outlying spectra. These variations in energy spectra provided ample data spread for correlating PME and FWHM with PDD metrics. Least-squares fits showed that R50 and R80-20 varied linearly and supralinearly with PME, respectively; however, both suggested a secondary dependence on FWHM. Hence, PME and FWHM could serve as surrogates for R50 and R80-20 for beam tuning by the accelerator engineer, possibly being more sensitive (e.g., 0.1 cm in R80-20 corresponded to 2.0 MeV in FWHM). CONCLUSIONS: Results of this study suggest a lightweight, permanent magnet spectrometer could be a useful beam-tuning instrument for the accelerator engineer to (a) match electron beams prior to beam commissioning, (b) tune electron beams for the duration of their clinical use, and (c) provide estimates of PDD metrics following machine maintenance. However, a real-time version of the spectrometer is needed to be practical.
Asunto(s)
Electrones , Método de Montecarlo , Neoplasias/radioterapia , Aceleradores de Partículas/instrumentación , Fantasmas de Imagen , Planificación de la Radioterapia Asistida por Computador/métodos , Humanos , Dosificación Radioterapéutica , Radioterapia de Intensidad Modulada/métodosRESUMEN
The purpose of this work was to evaluate differences in dose resulting from the use of copper aperture inserts compared to lead-alloy (Cerrobend) aperture inserts for electron beam therapy. Specifically, this study examines if copper aperture inserts can be used clinically with the same commissioning data measured using lead-alloy aperture inserts. The copper inserts were acquired from .decimal, LLC and matching lead-alloy, Cerrobend inserts were constructed in-house for 32 com-binations of nine square insert field sizes (2 × 2 to 20 × 20 cm2) and five applicator sizes (6 × 6 to 25 × 25 cm2). Percent depth-dose and off-axis relative dose profiles were measured using an electron diode in water for select copper and Cerrobend inserts for a subset of applicators (6 × 6, 10 × 10, 25 × 25 cm2) and energies (6, 12, 20 MeV) at 100 and 110 cm source-to-surface distances (SSD) on a Varian Clinac 21EX accelerator. Dose outputs were measured for all field size-insert combina-tions and five available energies (6-20 MeV) at 100 cm SSD and for a smaller subset at 110 cm SSD. Using these data, 2D planar absolute dose distributions were generated and compared. Criteria for agreement were ± 2% of maximum dose or 1 mm distance-to-agreement for 99% of points. A gamma analysis of the beam dosimetry showed 94 of 96 combinations of insert size, applicator, energy, and SSD were within the 2%/1 mm criteria for > 99% of points. Outside the field, copper inserts showed less bremsstrahlung dose under the insert compared to Cerrobend (greatest difference was 2.5% at 20 MeV and 100 cm SSD). This effect was most prominent at the highest energies for combinations of large applicators with small field sizes, causing some gamma analysis failures. Inside the field, more electrons scattered from the collimator edge of copper compared to Cerrobend, resulting in an increased dose at the field edge for copper at shallow depths (greatest increase was 1% at 20 MeV and 100 cm SSD). Dose differences decreased as the SSD increased, with no gamma failures at 110 cm SSD. Inserts for field sizes ≥ 6 × 6 cm2 at any energy, or for small fields (≤ 4 × 4 cm2) at energies < 20 MeV, showed dosimetric differences less than 2%/1 mm for more than 99% of points. All areas of comparison criteria failures were from lower out-of-field dose under copper inserts due to a reduction in bremsstrahlung production, which is clinically beneficial in reducing dose to healthy tissue outside of the planned treatment volume. All field size-applicator size-energy combinations passed 3%/1 mm criteria for 100% of points. Therefore, it should be clinically acceptable to utilize copper insets with dose distributions measured with Cerrobend inserts for treatment planning dose calculations and monitor unit calculations.
Asunto(s)
Aleaciones/química , Cobre/química , Electrones , Plomo/química , Fantasmas de Imagen , Humanos , Método de Montecarlo , Aceleradores de Partículas , Dosificación Radioterapéutica , Planificación de la Radioterapia Asistida por Computador/métodos , Radioterapia de Intensidad Modulada/métodosRESUMEN
The increasing complexity of modern radiation therapy planning and delivery challenges traditional prescriptive quality management (QM) methods, such as many of those included in guidelines published by organizations such as the AAPM, ASTRO, ACR, ESTRO, and IAEA. These prescriptive guidelines have traditionally focused on monitoring all aspects of the functional performance of radiotherapy (RT) equipment by comparing parameters against tolerances set at strict but achievable values. Many errors that occur in radiation oncology are not due to failures in devices and software; rather they are failures in workflow and process. A systematic understanding of the likelihood and clinical impact of possible failures throughout a course of radiotherapy is needed to direct limit QM resources efficiently to produce maximum safety and quality of patient care. Task Group 100 of the AAPM has taken a broad view of these issues and has developed a framework for designing QM activities, based on estimates of the probability of identified failures and their clinical outcome through the RT planning and delivery process. The Task Group has chosen a specific radiotherapy process required for "intensity modulated radiation therapy (IMRT)" as a case study. The goal of this work is to apply modern risk-based analysis techniques to this complex RT process in order to demonstrate to the RT community that such techniques may help identify more effective and efficient ways to enhance the safety and quality of our treatment processes. The task group generated by consensus an example quality management program strategy for the IMRT process performed at the institution of one of the authors. This report describes the methodology and nomenclature developed, presents the process maps, FMEAs, fault trees, and QM programs developed, and makes suggestions on how this information could be used in the clinic. The development and implementation of risk-assessment techniques will make radiation therapy safer and more efficient.
Asunto(s)
Garantía de la Calidad de Atención de Salud/métodos , Planificación de la Radioterapia Asistida por Computador/métodos , Radioterapia de Intensidad Modulada/normas , Humanos , Errores Médicos/prevención & control , Neoplasias/radioterapia , Radioterapia de Intensidad Modulada/métodos , Medición de Riesgo/métodosRESUMEN
AIM: To estimate cost-effectiveness of botulinum toxin therapy for axillary hyperhidrosis compared to the standard surgical intervention of endoscopic thoracic sympathectomy (ETS). METHODS: The validated dermatology life quality index questionnaire was given to patients attending for treatment over a 4 month period, to assess their quality of life (QoL) over the preceding week (n = 44). Follow-up was performed 4-6 weeks later by telephone using the same questionnaire to validate the effectiveness of the treatment. The duration of effect of the botulinum toxin treatment was also recorded and this data was used as the basis for cost effectiveness analysis. Using HIPE data, the baseline cost for single intervention using botulinum toxin and ETS was retrieved. Using figures provided by HIPE and expert opinion of the costs of complications, a stochastic model for 10,000 patients was used to evaluate the total costs for ETS including the complications. RESULTS: The results from the QoL analysis show that botulinum toxin therapy is a successful therapy for improvement of symptoms. It was revealed that the mean interval before recurrence of original symptoms after botulinum toxin therapy was 5.6 months. The baseline cost for both treatments are 389 for botulinum toxin and 9389 for uncomplicated ETS. The stochastic model yields a mean cost of 11,390 for ETS including complications. CONCLUSIONS: Treatments reached cost equivalence after 13.3 years. However, given the efficacy of the botulinum toxin therapy and the low risk we propose that botulinum toxin therapy for hyperhidrosis should be considered the gold standard.
Asunto(s)
Toxinas Botulínicas/administración & dosificación , Fármacos Dermatológicos/administración & dosificación , Hiperhidrosis/tratamiento farmacológico , Hiperhidrosis/cirugía , Calidad de Vida , Simpatectomía , Toracoscopía , Adulto , Axila , Toxinas Botulínicas/economía , Fármacos Dermatológicos/economía , Femenino , Estudios de Seguimiento , Humanos , Hiperhidrosis/diagnóstico , Hiperhidrosis/economía , Masculino , Satisfacción del Paciente , Proyectos Piloto , Estudios Retrospectivos , Escocia , Encuestas y Cuestionarios , Simpatectomía/economía , Toracoscopía/economía , Toracoscopía/métodos , Resultado del TratamientoRESUMEN
PURPOSE: The purpose of this work was to adapt a lightweight, permanent magnet electron energy spectrometer for the measurement of energy spectra of therapeutic electron beams. METHODS: An irradiation geometry and measurement technique were developed for an approximately 0.54-T, permanent dipole magnet spectrometer to produce suitable latent images on computed radiography (CR) phosphor strips. Dual-pinhole electron collimators created a 0.318-cm diameter, approximately parallel beam incident on the spectrometer and an appropriate dose rate at the image plane (CR strip location). X-ray background in the latent image, reduced by a 7.62-cm thick lead block between the pinhole collimators, was removed using a fitting technique. Theoretical energy-dependent detector response functions (DRFs) were used in an iterative technique to transform CR strip net mean dose profiles into energy spectra on central axis at the entrance to the spectrometer. These spectra were transformed to spectra at 95-cm source to collimator distance (SCD) by correcting for the energy dependence of electron scatter. The spectrometer was calibrated by comparing peak mean positions in the net mean dose profiles, initially to peak mean energies determined from the practical range of central-axis percent depth-dose (%DD) curves, and then to peak mean energies that accounted for how the collimation modified the energy spectra (recalibration). The utility of the spectrometer was demonstrated by measuring the energy spectra for the seven electron beams (7-20 MeV) of an Elekta Infinity radiotherapy accelerator. RESULTS: Plots of DRF illustrated their dependence on energy and position in the imaging plane. Approximately 15 iterations solved for the energy spectra at the spectrometer entrance from the measured net mean dose profiles. Transforming those spectra into ones at 95-cm SCD increased the low energy tail of the spectra, while correspondingly decreasing the peaks and shifting them to slightly lower energies. Energy calibration plots of peak mean energy versus peak mean position of the net mean dose profiles for each of the seven electron beams followed the shape predicted by the Lorentz force law for a uniform z-component of the magnetic field, validating its being modeled as uniform (0.542 ± 0.027 T). Measured Elekta energy spectra and their peak mean energies correlated with the 0.5-cm (7-13 MeV) and the 1.0-cm (13-20 MeV) R90 spacings of the %DD curves. The full-width-half-maximum of the energy spectra decreased with decreasing peak mean energy with the exception of the 9-MeV beam, which was anomalously wide. Similarly, R80-20 decreased linearly with peak mean energy with the exception of the 9 MeV beam. Both were attributed to suboptimal tuning of the high power phase shifter for the recycled radiofrequency power reentering the traveling wave accelerator. CONCLUSIONS: The apparatus and analysis techniques of the authors demonstrated that an inexpensive, lightweight, permanent magnet electron energy spectrometer can be used for measuring the electron energy distributions of therapeutic electron beams (6-20 MeV). The primary goal of future work is to develop a real-time spectrometer by incorporating a real-time imager, which has potential applications such as beam matching, ongoing beam tune maintenance, and measuring spectra for input into Monte Carlo beam calculations.
Asunto(s)
Electrones/uso terapéutico , Imanes , Aceleradores de Partículas , Radioterapia/instrumentación , Análisis Espectral/instrumentaciónRESUMEN
PURPOSE: Wear of ceramic orthopedic devices generates nanoparticles in vivo that may present a different biological character from the monolithic ceramic from which they are formed. The current work investigated protein adsorption from human plasma on alumina nanoparticles and monolithic samples representative of both wear particles and the ceramic components as implanted. MATERIALS AND METHODS: A physicochemical characterization of the particles and their dispersion state was carried out, and the protein adsorption profiles were analyzed using 1D SDS-PAGE and mass spectrometry. RESULTS: Significant differences in protein-binding profiles were identified where the nanoparticles selectively bound known transporter proteins rather than the more highly abundant serum proteins that were observed on the monoliths. CONCLUSIONS: Proteins associated with opsonization of particles were seen to be present in the protein corona of the nanoparticles, which raises questions regarding the role of wear particles in periprosthetic tissue inflammation and aseptic loosening.
Asunto(s)
Óxido de Aluminio/química , Materiales Biocompatibles/química , Proteínas Sanguíneas/química , Cerámica/química , Prótesis Articulares , Nanopartículas/química , Corona de Proteínas/química , Adsorción , Proteínas Sanguíneas/metabolismo , Humanos , Corona de Proteínas/metabolismoRESUMEN
Accurate beam data acquisition during commissioning is essential for modeling the treatment planning system and dose calculation in radiotherapy. Although currently several commercial scanning systems are available, there is no report that compared the differences among the systems because most institutions do not acquire several scanning systems due to the high cost, storage space, and infrequent usage. In this report, we demonstrate the intra- and intervariability of beam profiles measured with four commercial scanning systems. During a recent educational and training workshop, four different vendors of beam scanning water phantoms were invited to demonstrate the operation and data collection of their systems. Systems were set up utilizing vendor-recommended protocols and were operated with a senior physicist, who was assigned as an instructor along with vendor. During the training sessions, each group was asked to measure beam parameters, and the intravariability in percent depth dose (PDD). At the end of the day, the profile of one linear accelerator was measured with each system to evaluate intervariability. Relatively very small (SD < 0.12%) intervariability in PDD was observed among four systems at a region deeper than peak (1.5 cm). All systems showed almost identical profiles. At the area within 80% of radiation field, the average, and maximum differences were within ± 0.35% and 0.80%, respectively, compared to arbitrarily chosen IBA system as reference. In the penumbrae region, the distance to agreement (DTA) of the region where dose difference exceed ± 1% was less than 1 mm. Repeated PDD measurement showed small intravariability with SD < 0.5%, although large SD was observed in the buildup region. All four water phantom scanning systems demonstrated adequate accuracy for beam data collection (i.e., within 1% of dose difference or 1 mm of DTA among each other). It is concluded that every system is capable of acquiring accurate beam. Thus the selection of a water scanning system should be based on institutional comfort, personal preference of software and hardware, and financial consideration.
Asunto(s)
Aceleradores de Partículas/instrumentación , Aceleradores de Partículas/normas , Fantasmas de Imagen , Radiometría/métodos , Radiometría/normas , Planificación de la Radioterapia Asistida por Computador/métodos , Humanos , Fotones , Dosificación Radioterapéutica , Planificación de la Radioterapia Asistida por Computador/normas , Programas Informáticos , AguaRESUMEN
In 2009, Mary Bird Perkins Cancer Center (MBPCC) established a Radiation Oncology Physics Residency Program to provide opportunities for medical physics residency training to MS and PhD graduates of the CAMPEP-accredited Louisiana State University (LSU)-MBPCC Medical Physics Graduate Program. The LSU-MBPCC Program graduates approximately six students yearly, which equates to a need for up to twelve residency positions in a two-year program. To address this need for residency positions, MBPCC has expanded its Program by developing a Consortium consisting of partnerships with medical physics groups located at other nearby clinical institutions. The consortium model offers the residents exposure to a broader range of procedures, technology, and faculty than available at the individual institutions. The Consortium institutions have shown a great deal of support from their medical physics groups and administrations in developing these partnerships. Details of these partnerships are specified within affiliation agreements between MBPCC and each participating institution. All partner sites began resident training in 2011. The Consortium is a network of for-profit, nonprofit, academic, community, and private entities. We feel that these types of collaborative endeavors will be required nationally to reach the number of residency positions needed to meet the 2014 ABR certification requirements and to maintain graduate medical physics training programs.
Asunto(s)
Certificación , Física Sanitaria/educación , Internado y Residencia/normas , Oncología por Radiación/educación , Humanos , Médicos , Desarrollo de Programa , Evaluación de Programas y Proyectos de Salud , Sociedades Médicas , Estados UnidosRESUMEN
PURPOSE: To assess the accuracy and precision of cone-beam computed tomography (CBCT)-guided intensity modulated radiation therapy (IMRT). METHODS AND MATERIALS: A 7-field intensity modulated radiation therapy plan was constructed for an anthropomorphic head phantom loaded with a custom cassette containing radiochromic film. The phantom was positioned on the treatment table at 9 locations: 1 "correct" position and 8 "misaligned" positions along 3 orthogonal axes. A commercial kilovoltage cone-beam computed tomography (kV-CBCT) system (VolumeView, Elekta AB, Stockholm, Sweden) was then used to align the phantom prior to plan delivery. The treatment plan was delivered using the radiation therapy delivery system (Infinity; Elekta AB) 3 times for each of the 9 positions, allowing film measurement of the delivered dose distribution in 3 orthogonal planes. Comparison of the planned and delivered dose profiles along the major axes provided an estimate of the accuracy and precision of CBCT-guided IMRT. RESULTS: On average, targeting accuracy was found to be within 1 mm in all 3 major anatomic planes. Over all 54 measured dose profiles, the means and standard errors of the displacement of the center of the field between the measured and calculated profiles for each of the right-left, anterior-posterior, and superior-inferior axes were +0.08 ± 0.07 mm, +0.60 ± 0.08 mm, and +0.78 ± 0.16 mm, respectively. Agreement between planned and measured 80% profiles was less than 0.4 mm on either side along the right-left axis. A systematic shift of the measured profile of slightly less than 1 mm in anterior and superior directions was noted along the anterior-posterior and superior-inferior axes, respectively. CONCLUSIONS: Submillimeter targeting accuracy can be achieved using a commercial kV-CBCT IGRT system.
Asunto(s)
Tomografía Computarizada de Haz Cónico/métodos , Planificación de la Radioterapia Asistida por Computador/métodos , Radioterapia de Intensidad Modulada/métodos , Encéfalo/anatomía & histología , Tomografía Computarizada de Haz Cónico/normas , Precisión de la Medición Dimensional , Cabeza/anatomía & histología , Humanos , Fantasmas de Imagen , Dosificación Radioterapéutica , Planificación de la Radioterapia Asistida por Computador/normas , Radioterapia de Intensidad Modulada/normasRESUMEN
A protocol is presented for the calculation of monitor units (MU) for photon and electron beams, delivered with and without beam modifiers, for constant source-surface distance (SSD) and source-axis distance (SAD) setups. This protocol was written by Task Group 71 of the Therapy Physics Committee of the American Association of Physicists in Medicine (AAPM) and has been formally approved by the AAPM for clinical use. The protocol defines the nomenclature for the dosimetric quantities used in these calculations, along with instructions for their determination and measurement. Calculations are made using the dose per MU under normalization conditions, D'0, that is determined for each user's photon and electron beams. For electron beams, the depth of normalization is taken to be the depth of maximum dose along the central axis for the same field incident on a water phantom at the same SSD, where D'0 = 1 cGy/MU. For photon beams, this task group recommends that a normalization depth of 10 cm be selected, where an energy-dependent D'0 ≤ 1 cGy/MU is required. This recommendation differs from the more common approach of a normalization depth of dm, with D'0 = 1 cGy/MU, although both systems are acceptable within the current protocol. For photon beams, the formalism includes the use of blocked fields, physical or dynamic wedges, and (static) multileaf collimation. No formalism is provided for intensity modulated radiation therapy calculations, although some general considerations and a review of current calculation techniques are included. For electron beams, the formalism provides for calculations at the standard and extended SSDs using either an effective SSD or an air-gap correction factor. Example tables and problems are included to illustrate the basic concepts within the presented formalism.