Naphthalene Tetracarboxydiimide-Based n-Type Polymers with Removable Solubility via Thermally Cleavable Side Chains.

Multilayer solution-processed devices in organic electronics show the tendency of intermixing of subsequently deposited layers. Here, we synthesize naphthalene tetracarboxydiimide (NDI)-based n-type semiconducting polymers with thermally cleavable side chains which upon removal render the polymer insoluble. Infrared and photoelectron spectroscopy were performed to investigate the pyrolysis process. Characterization of organic field-effect transistors provides insight into charge transport. After the pyrolysis homogeneous films could be produced which are insoluble in the primary solvent. By varying curing temperature and time we show that these process parameters govern the amount of side chains in the film and influence the device performance.

Dipolar SAMs Reduce Charge Carrier Injection Barriers in n-Channel Organic Field Effect Transistors.

In this work we examine small conjugated molecules bearing a thiol headgroup as self assembled monolayers (SAM). Functional groups in the SAM-active molecule shift the work function of gold to n-channel semiconductor regimes and improve the wettability of the surface. We examine the effect of the presence of methylene linkers on the orientation of the molecule within the SAM. 3,4,5-Trimethoxythiophenol (TMP-SH) and 3,4,5-trimethoxybenzylthiol (TMP-CH2-SH) were first subjected to computational analysis, predicting work function shifts of -430 and -310 meV. Contact angle measurements show an increase in the wetting envelope compared to that of pristine gold. Infrared (IR) measurements show tilt angles of 22 and 63°, with the methylene-linked molecule (TMP-CH2-SH) attaining a flatter orientation. The actual work function shift as measured with photoemission spectroscopy (XPS/UPS) is even larger, -600 and -430 meV, respectively. The contact resistance between gold electrodes and poly[N,N'-bis(2-octyldodecyl)-naphthalene-1,4:5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5'-(2,2'-bithiophene) (Polyera Aktive Ink, N2200) in n-type OFETs is demonstrated to decrease by 3 orders of magnitude due to the use of TMP-SH and TMP-CH2-SH. The effective mobility was enhanced by two orders of magnitude, significantly decreasing the contact resistance to match the mobilities reported for N2200 with optimized electrodes.

Infrared Spectroscopic Study of Vibrational Modes in Methylammonium Lead Halide Perovskites.

The organic cation and its interplay with the inorganic lattice underlie the exceptional optoelectronic properties of organo-metallic halide perovskites. Herein we report high-quality infrared spectroscopic measurements of methylammonium lead halide perovskite (CH3NH3Pb(I/Br/Cl)3) films and single crystals at room temperature, from which the dielectric function in the investigated spectral range is derived. Comparison with electronic structure calculations in vacuum of the free methylammonium cation allows for a detailed peak assignment. We analyze the shifts of the vibrational peak positions between the different halides and infer the extent of interaction between organic moiety and the surrounding inorganic cage. The positions of the NH3(+) stretching vibrations point to significant hydrogen bonding between the methylammonium and the halides for all three perovskites.

Real-Time Observation of Organic Cation Reorientation in Methylammonium Lead Iodide Perovskites.

The introduction of a mobile and polarized organic moiety as a cation in 3D lead-iodide perovskites brings fascinating optoelectronic properties to these materials. The extent and the time scales of the orientational mobility of the organic cation and the molecular mechanism behind its motion remain unclear, with different experimental and computational approaches providing very different qualitative and quantitative description of the molecular dynamics. Here we use ultrafast 2D vibrational spectroscopy of methylammonium (MA) lead iodide to directly resolve the rotation of the organic cations within the MAPbI3 lattice. Our results reveal two characteristic time constants of motion. Using ab initio molecular dynamics simulations, we identify these as a fast (∼300 fs) "wobbling-in-a-cone" motion around the crystal axis and a relatively slow (∼3 ps) jump-like reorientation of the molecular dipole with respect to the iodide lattice. The observed dynamics are essential for understanding the electronic properties of perovskite materials.

Processing follows function: pushing the formation of self-assembled monolayers to high-throughput compatible time scales.

Self-assembled monolayers (SAMs) of organic molecules can be used to tune interface energetics and thereby improve charge carrier injection at metal-semiconductor contacts. We investigate the compatibility of SAM formation with high-throughput processing techniques. Therefore, we examine the quality of SAMs, in terms of work function shift and chemical composition as measured with photoelectron and infrared spectroscopy and in dependency on molecular exposure during SAM formation. The functionality of the SAMs is determined by the performance increase of organic field-effect transistors upon SAM treatment of the source/drain contacts. This combined analytical and device-based approach enables us to minimize the necessary formation times via an optimization of the deposition conditions. Our findings demonstrate that SAMs composed of partially fluorinated alkanethiols can be prepared in ambient atmosphere from ethanol solution using immersion times as short as 5 s and still exhibit almost full charge injection functionality if process parameters are chosen carefully. This renders solution-processed SAMs compatible with high-throughput solution-based deposition techniques.

Spatial extent of plasmonic enhancement of vibrational signals in the infrared.

Infrared vibrations of molecular species can be enhanced by several orders of magnitude with plasmonic nanoantennas. Based on the confined electromagnetic near-fields of resonantly excited metal nanoparticles, this antenna-assisted surface-enhanced infrared spectroscopy enables the detection of minute amounts of analytes localized in the nanometer-scale vicinity of the structure. Among other important parameters, the distance of the vibrational oscillator of the analyte to the nanoantenna surface determines the signal enhancement. For sensing applications, this is a particularly important issue since the vibrating dipoles of interest may be located far away from the antenna surface because of functional layers and the large size of biomolecules, proteins, or bacteria. The relation between distance and signal enhancement is thus of paramount importance and measured here with in situ infrared spectroscopy during the growth of a probe layer. Our results indicate a diminishing signal enhancement and the effective saturation of the plasmonic resonance shift beyond 100 nm. The experiments carried out under ultra-high-vacuum conditions are supported by numerical calculations.

Glandular resection and central embedding in hypospadias repair--a novel modification of the Barcat technique.

PURPOSE: Urethrocutaneous fistula and urethral or meatal stricture, to date, remain the commonest complications of hypospadias repair, with increased tissue tension being a major cause of failure. We developed a novel technique comprising glandular resection and central embedding of the neourethra to specifically address this critical issue. We report the results of the first 112 procedures, of which 7 cases were a secondary hypospadias repair. MATERIALS AND METHODS: All patients who underwent hypospadias repair using the glandular resection and central embedding technique over a period of 10 years were included into this retrospective single-surgeon case series. An independent third-party observer carried out follow-up examinations including urometric evaluation. RESULTS: The median follow-up was 37 months (range, 7-147 months). In the group of primary hypospadias repair, urethrocutaneous fistulas were observed in 4%, all requiring surgical revision, and meatal or urethral stricture were observed in 4% of the patients, treated either surgically or by dilatation. In 98% of the patients, the neomeatus was located at the tip of the glans. A cosmetically impeccable slitlike appearance of the meatus was achieved in 84%, and a cosmetically acceptable oval shape was achieved in 10% of the patients. Both maximum and average urinary flow rates were within the standard ranges for the respective age groups in 93.7% and 96%, respectively. There was no significant residual urine in 92% of the patients. In the group of secondary hypospadias repairs, both cosmetic and functional results were similar, and no complications were noted. CONCLUSIONS: Glandular resection and central embedding is a promising expansion of the repertoire of Barcat modifications. It allows safe embedding of the neourethra and glandular closure without detrimental tension. The cosmetic and functional results are encouraging.

Bioavailability of lutein in humans from intrinsically labeled vegetables determined by LC-APCI-MS.

The aim of the investigation was to assess a stable isotope method for determining the relative bioavailability of food-derived lutein in humans. Subjects were administered a single dose of deuterium-labeled carotenoids from intrinsically labeled spinach or collard green; 10 mL blood samples were drawn at various time points over a 34 days period. The vegetables had been hydroponically grown using 25 atom-% deuterated water. Lutein molecules in the vegetables were partially deuterated with a highest abundance isotopomer at M(0) + 8 (unlabeled molecular mass, M(0,) plus 8 additional mass units from 8 deuterium atoms in the molecules). This allowed labeled lutein to be distinguished from endogenous lutein in serum samples after consuming the labeled meal. The presence of labeled lutein in the circulation was determined by liquid chromatography-mass spectrometry (LC/MS) equipped with an atmospheric pressure chemical ionization (APCI) interface. The quantification of the labeled lutein in serum samples enabled the calculation of the enrichment for each time point after the dose; these values were plotted vs. time to generate absorption-clearance curves for each of the subjects. Area under the curve analyses of four different subjects (integrated over 29 days) yielded serum lutein responses of 128, 145, 149, and 262 microg-day/mg dietary lutein, following an acute dose of spinach containing 15.4, 18.8, 18.8 and 9.8 mg labeled lutein, respectively. This technique will facilitate the study of lutein bioavailability from different foods of diverse carotenoid composition and/or following various food preparation procedures.

Characterization of lycopene nanoparticles combining solid-state and suspended-state NMR spectroscopy.

The core-shell structure of lycopene micronizates can be verified by employing a combination of solid-state and suspended-state NMR spectroscopy. The type of molecular aggregation of carotenoid nanoparticles can be clearly determined from their characteristic fingerprint pattern in the solid-state NMR spectra.

Qualitative and quantitative analysis of tocopherols in toothpastes and gingival tissue employing HPLC NMR and HPLC MS coupling.

Gingival samples treated with toothpastes containing tocopherols (vitamin E) were investigated employing HPLC chromatography. The aim was to verify that vitamin E is actually enriched in the tissue, which could have beneficial effects on oral health. After determination of the tocopherols available in the toothpastes, control samples from healthy test persons and subjects suffering from gingivitis were analyzed. Subsequently, gingival tissues from diseased test persons who treated their teeth with the toothpastes containing tocopherols using various kinds of concentrations or applications were investigated. The first step of the analysis was a fast and careful extraction employing matrix solid-phase dispersion (MSPD). Afterward, the separation of the different tocopherol homologues existing was performed by HPLC chromatography on highly selective C30 RP phases. The identification of the tocopherol homologues was performed using the on-line coupling of HPLC with NMR spectroscopy and mass spectrometry.