RESUMEN
A sustainable procedure offering green, simple, and rapid analysis was developed to determine benzalkonium chloride (BKC) in pharmaceutical preparations. The determination using smartphones was based on the ion pair colorimetric reaction with bromothymol blue (BTB), which produces a yellow color. The intensity of the product color, which is proportional to the concentration of BKC, was detected and evaluated using a smartphone camera and an image processing application. The procedure was performed in a microliter and was rapidly detected within 1 min after incubation. This offered high throughput at 28 samples per well plate in duplicate. Linear calibration, which was a plot of BKC concentrations and relative red intensities, was in the range of 2.0-24.0 µg/mL with an R2 of 0.997. The limits of detection (LOD) and quantitation (LOQ) were 1.0 and 3.2 µg/mL, respectively. This work was successful in applying it to pharmaceutical materials, disinfectant products, and pharmaceutical products containing BKC. It was discovered that the concentrations of BKC as an active ingredient in pharmaceutical materials were 82% w/v, whereas those in disinfectant products ranged from 0.4 to 2.1% w/v. In pharmaceutical products, ophthalmic drops and nasal sprays contain BKC as preservatives in the 0.01-0.02, and the 0.02% w/v, respectively. The results obtained by the proposed procedure compared with a reference titration method showed no significant differences at a 95% confidence level with 1.2-3.4% RSDs. This promotes the efficiency of pharmaceutical preparations regarding infection prevention and control by ensuring that available disinfectants contain a sufficient concentration of BKC. Additionally, this improves the efficiency of pharmaceutical preparations for quality control of pharmaceutical products by ensuring that the available preservatives maintain a sufficient concentration throughout the lifespan of the products.
RESUMEN
Iron-tannic nanoparticles were used as a new adsorbent for dispersive solid phase extraction (DSPE) synergized with cloud point extraction (CPE) to enrich four tetracyclines (oxytetracycline, tetracycline, chlortetracycline, and doxycycline) prior to high-performance liquid chromatographic determination. DSPE and CPE were performed simultaneously in a one-pot co-extraction to form iron-tannic nanoparticles in-situ and pre-concentrate the tetracyclines. The parameters affecting the extraction efficiency were investigated. Using the optimal parameters, linear calibrations ranging from 2.63 to 1000 ng mL-1 were obtained, with determination coefficients greater than 0.996. The limit of detection was found to be 1.06-3.19 ng mL-1, while the limit of quantification was 2.63-10.65 ng mL-1. Precision was expressed as a relative standard deviation of less than 10%. The residues of the four tetracyclines in milk, eggs, honey, chicken liver, and chicken kidney samples were determined by the proposed method. The recoveries ranged from 79.3 to 107.1%. The results indicated that the proposed method was an alternative method for the extraction and pre-concentration of tetracyclines with high extraction and enrichment efficiency. In addition, it promoted rapidity and environmental friendliness.
Asunto(s)
Nanopartículas , Tetraciclinas , Tetraciclinas/análisis , Cromatografía Líquida de Alta Presión/métodos , Hierro , Extracción en Fase Sólida/métodos , Antibacterianos/análisis , Nanopartículas/análisisRESUMEN
A novel, cost-effective platform using a biodegradable sensor and a simple heat control unit was proposed for multi-sample formaldehyde (FA) assay in one run based on pervaporation. The biodegradable sensor was a composite starch gel attached to paper and immobilized with a mixture of color agents of modified 4-amino-3-hydrazino-5-mercapto-1,2,4-triazol (AHMT). The sensor was situated on the cap of a vial that served for pervaporation. Two types of heat control units were specially designed using the concepts of aluminum block and water bath heating. With these two designs, multi-sample assays together with standard calibration could be performed in the same run under the same conditions. An FA solution was placed in the vial of the pervaporation unit. After a heating period, FA vapor would change the color of the sensor to purple due to the reaction between AHMT and FA. As a result, the color intensity was proportional to the FA concentration. The change of the color (green or G intensity) was monitored using a smartphone camera and image processing software. Factors affecting the sensitivity of the assay, pervaporation time, pervaporation temperature, FA solution volume, and humidity, were studied. Under the chosen condition, the developed procedure, with a calibration of G intensity = 7.93[FA] + 198, R2 = 0.98, was applied to analyze real samples of seafood and mushrooms available in local markets in Thailand. As there were 24 pervaporation units in the proposed platform, 5 working standards and 9 samples with duplicates could be included in a 1-run assay either in the laboratory or on-site. The developed assay offers green chemical analysis with a simple, cost-effective approach. This serves the UN-SDGs of #2, #3, #7, #10, and #12.
RESUMEN
Coconut oil as a natural solvent is proposed for green downscaling solvent extractive determination. Determination of Cu(II) using 1,5-Diphenylcarbazide (DPC) was selected as a model for the investigation. Cu(II)-DPC complexes in aqueous solution were transferred into coconut oil phase. The change of the color due to Cu(II)-DPC complexes in coconut oil was followed by using a smartphone and image processing. A single standard concept was used for a series of Cu(II) standard solutions. A downscaling procedure using a 2 mL vial provided a calibration: color intensity = -142 [Cu(II)] + 222, (R2 = 0.98), 10% RSD. Using a well plate, a calibration was: color intensity = 61 [Cu(II)] + 68 (R2 = 0.91), 15% RSD. Both were for the range of 0-1 ppm Cu(II). Application of the developed procedure to water samples was demonstrated. The developed procedures provided a new approach of green chemical analysis.
Asunto(s)
Colorimetría , Agua , Difenilcarbazida/química , Aceite de Coco , Solventes/análisis , Colorimetría/métodos , Cobre/químicaRESUMEN
We proposed a specially designed sequential injection (SI) amperometric system coupling with a bioreactor for in-line glucose monitoring in cell culture. The system is composed of three main parts which are the bioreactor, SI system, and electrochemical detection unit. The bioreactor accommodates six individual cell culture units which can be operated separately under different conditions. The SI system enables automatic in-line sampling and in-line sample dilution, with a specially designed mixing unit; therefore, it has the benefits of fast analysis time and less contamination risk. The use of 3D-printed microfluidic components, a mixing channel, and a flow cell helped to reduce operational time and sample volume. A disposable screen-printed electrode (SPE), modified with glucose oxidase (GOD), carbon nanotube, and gold nanoparticle, was used for detection. The developed system provided a linear range up to 3.8 mM glucose in cell culture media. In order to work with cell culture in higher glucose media, the in-line sample dilution can be applied. The developed SI system was demonstrated with mouse fibroblast (L929) cell culture. The results show that glucose concentration obtained from the SI system is comparable with that obtained from the conventional colorimetric method. This work can be further developed and applied for in vitro cell-based experiments in biomedical research.
Asunto(s)
Técnicas Biosensibles , Nanopartículas del Metal , Nanotubos de Carbono , Animales , Reactores Biológicos , Técnicas Biosensibles/métodos , Glucemia , Automonitorización de la Glucosa Sanguínea , Técnicas de Cultivo de Célula , Electroquímica , Electrodos , Glucosa/análisis , Glucosa Oxidasa , Oro , RatonesRESUMEN
An ultrasound-assisted, one-pot cloud point extraction was developed for the determination of iron in vegetable samples by UV-Visible spectrophotometry. This method was based on the complexation of iron with an environmentally-friendly natural chelating agent extracted from Dipterocarpus intricatus Dyer fruit at pH 5.5 in the presence of Triton X-114. Reagent extraction, complexation, and preconcentration were performed simultaneously using ultrasound-assisted extraction at 45 °C. The surfactant-rich phase was diluted with ethanol and loaded through a syringe barrel packed with cotton that acted as a filter to trap the reagent powder. Analyte-entrapped on cotton was eluted using 0.1 mol·L-1 nitric acid solution. Filtrate and eluate solutions were measured absorbance of the dark-blue product at 575 nm. Influential parameters for the procedure were investigated. Under the optimum experimental conditions, the calibration curve was linear, ranging from 0.1 to 1.0 mg·L-1 with r2 = 0.997. Limits of detection and quantification were 0.03 and 0.09 mg·L-1, respectively while precision values of intra-day and inter-day were less than 5%. Recovery at 0.5 mg·L-1 ranged from 89.0 to 99.8%, while iron content in vegetable samples ranged from 2.45 to 13.36 mg/100 g. This method was cost-effective, reliable, eco-friendly, and convenient as a green analytical approach to determining iron content.
Asunto(s)
Frutas , Hierro , Quelantes , Concentración de Iones de Hidrógeno , Ligandos , Octoxinol , Espectrofotometría/métodos , VerdurasRESUMEN
Dual determination of nitrite and iron was proposed by using a single greener sequential injection (SI) spectrophotometric system employing a simple single aqueous extract from Areca catechu Linn. The extract served as a natural reagent to replace N-(1-naphthyl)ethylenediamine (NED) of the Griess reagent with nitrite and 1,10-phenanthroline with iron. The color products possessed analytical wavelengths at 430 and 560 nm, respectively. Conditions for the SI procedure were optimized using a univariate experimental design. Calibration ranges were up to 5.0 mg L-1 and 10.0 mg L-1 with limits of detection (LODs) of 0.04 mg L-1 and 0.05 mg L-1 for nitrite and iron(iii), respectively, and relative standard deviations (RSDs) being less than 3%. Recoveries of spiked standard nitrite and iron(iii) at 0.3 mg L-1 and 0.5 mg L-1 in water samples were 88 to 104% and 84 to 109%, respectively. The developed method successfully achieved dual determination of nitrite and total iron agreeing at a 95% confidence level with the reference methods of the conventional Griess assay and flame atomic absorption spectrometry (FAAS), respectively. The proposed method utilized locally available material from plants and serves the UN-SDGs.
RESUMEN
A sustainable downscaled procedure using smartphone-based colorimetric determination of manganese (Mn(II)) was developed. This novel Mn(II) determination procedure is proposed using a simple, available microwell-plate platform and a smartphone as a detector. This approach is based on the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) by periodate using Mn(II) as a catalyst. The catalytic kinetics of Mn(II) under different conditions was investigated to determine the optimum condition where the different catalytic activities of various concentrations of Mn(II) evince. Under the optimum condition, the bluish-green product of oxidized TMB, proportioned to the concentration of Mn(II), was monitored using a smartphone camera, and the color signals were processed using ImageJ Software. The developed procedure showed great selectivity and sensitivity as linearity ranged from 1.8 × 10-6 to 4.6 × 10-5 M (0.1 to 2.5 µg/mL). The limits of detection and quantitation were 3.6 × 10-6 and 1.1 × 10-5 M (0.2 and 0.6 µg/mL), respectively. The determination of Mn(II) in freshwater samples was demonstrated to assess environmental water quality as an initial model to more easily promote water management according to the United Nations Sustainable Development Goals (UN-SDGs). The intensity of the red could be successfully applied to evaluate Mn(II) in canals and river water with no significant differences compared with the reference method of Inductively Coupled Plasma Optical Emission Spectrometry at a confidence level of 95%.
Asunto(s)
Colorimetría , Manganeso , Bencidinas , Colorimetría/métodos , Agua Dulce , Manganeso/química , Ácido Peryódico , Teléfono InteligenteRESUMEN
A simple and reliable dispersive liquid-liquid microextraction (DLLME) coupled with smartphone-based digital images using crude peroxidase extracts from cassia bark (Senna siamea Lam.) was proposed to determine carbaryl residues in Andrographis paniculata herbal medicines. The method was based on the reaction of 1-naphthol (hydrolysis of carbaryl) with 4-aminoantipyrine (4-AP) in the presence of hydrogen peroxide, using peroxidase enzyme simple extracts from cassia bark as biocatalysts under pH 6.0. The red product, after preconcentration by DLLME using dichloromethane as extraction solvent, was measured for blue intensity by daily life smartphone-based digital image analysis. Under optimized conditions, good linearity of the calibration graph was found at 0.10-0.50 mg·L-1 (r2 = 0.9932). Limits of detection (LOD) (3SD/slope) and quantification (LOQ) (10SD/slope) were 0.03 and 0.09 mg·L-1, respectively, with a precision of less than 5%. Accuracy of the proposed method as percentage recovery gave satisfactory results. The proposed method was successfully applied to analyze carbaryl in Andrographis paniculata herbal medicines. Results agreed well with values obtained from the HPLC-UV method at 95% confidence level. This was simple, convenient, reliable, cost-effective and traceable as an alternative method for the determination of carbaryl.
Asunto(s)
Microextracción en Fase Líquida , Andrographis paniculata , Carbaril , Microextracción en Fase Líquida/métodos , Peroxidasa , Peroxidasas , Corteza de la Planta , Extractos Vegetales , Teléfono InteligenteRESUMEN
A new biodegradable platform-based sensor for formaldehyde assay is proposed. Natural rubber latex was modified to polylactic acid-chloroacetated natural rubber polymer blend sheets. The polymer blend sheet was grafted using a water-based system with amine monomers as a platform, with a spot exhibiting positive polarity for immobilizing with anionic dye (Acid Red 27). The sensor was exposed to formaldehyde. The color intensity of the dye on the sensor spot would decrease. Using a smartphone with image processing (via ImageJ program), the color intensity change (∆B) could be followed. A linear calibration, ∆B intensity = 0.365 [FA] + 6.988, R2 = 0.997, was obtained for 10-150 mM FA with LOD and LOQ at 3 and 10 mM, respectively (linear regression method). The precision was lower than 20% RSD. Application to real seafood samples was demonstrated. The ready-to-use sensor with the proposed method was cost-effective, was portable for on-site analysis, and demonstrated green chemical analysis.
Asunto(s)
Goma , Teléfono Inteligente , Formaldehído/análisis , Alimentos Marinos/análisis , AguaRESUMEN
Paper-based analytical devices (PADs) with four new designs could be fabricated using commercially available home-based scan-and-cut printer. They serve for miniaturised platforms for chemical analysis. Replication analysis of a sample together with the calibration (using the analyte standards at different concentrations) can be completed in a single run, by utilising smartphone as the detector. Some new approaches for choosing detection zones were suggested. The four proposed PAD designs here were used as models in microliter scale operation to demonstrate the well-known chemistries of colorimetric determinations of iron, phosphate, and hardness using 1,10-phenanthroline and simple aqueous guava leaf extract; molybdate, and EBT-EDTA complexometric titration, respectively, through calibrations: where Blue (B) value = 88.2log [Fe3+] - 80.8, R2 = 0.989; B value = 1.75 [Fe3+] + 0.198, R2 = 0.999; Grey scale (I) value = 1.77 [Fe3+] - 1.22, R2 = 0.997; Red (R) value = 16.1log [PO43-] + 8.95, R2 = 0.999; Hue (H) value = 43.3log [Ca2+] + 233, R2 = 0.994, respectively. For the hardness, using one of the PAD designs, true titration was also possible. Applications of the proposed devices and procedures were demonstrated for real world samples with validation. Additionally, kinetic study of the molybdenum blue for phosphate was demonstrated using one of the PADs.
Asunto(s)
Papel , Teléfono Inteligente , Calibración , Colorimetría , HierroRESUMEN
In this paper, a novel antioxidant analysis is proposed using a simple minimized device based on moving drops as solution handling and a smartphone as a detector. This approach is based on the colorimetric determination of the scavenging activity against 2,2-diphenyl-1-picrylhydrazyl radical (DPPHâ¢), expressed as the half-maximal inhibitory concentration (IC50), vitamin C equivalent antioxidant capacity (VCEAC), and Trolox equivalent antioxidant capacity (TEAC). A small drop of the positive control or the samples moves by eluting an ethanol drop down by the force of gravity to react with a DPPH⢠drop in the detection zone. The color change of DPPH⢠is monitored by a smartphone camera, and the color signals are processed using Adobe Photoshop software. The magenta-to-yellow ratio was successfully applied to evaluate the percentage of DPPH⢠inhibition with no significant difference compared with the reference spectrophotometric method at a confidence level of 95%. The total phenolic content (TPC) was measured using the Folin-Ciocalteu assay. An application to Miang (fermented tea leaf extract) showed the consonant relationship between the scavenging activity of DPPH⢠and TPC.
Asunto(s)
Antioxidantes/análisis , Técnicas Biosensibles/instrumentación , Ácido Ascórbico/análisis , Calorimetría , Concentración 50 Inhibidora , Fenoles/análisis , Teléfono Inteligente , Programas InformáticosRESUMEN
High performance liquid chromatography (HPLC) for catechins and related compounds in Miang (traditional Lanna fermented tea leaf) was developed to overcome the matrices during the fermentation process. We investigated a variety of columns and elution conditions to determine seven catechins, namely (+)-catechin, (-)-gallocatechin, (-)-epigallocatechin, (-)-epicatechin, (-)-epigallocatechin gallate, (-)-gallocatechin gallate, (-)-epicatechin gallate, as well as gallic acid and caffeine, resulting in the development of reproducible systems for analyses that overcome sample matrices. Among the three reversed-phase columns, column C (deactivated, with extra dense bonding, double endcapped monomeric C18, high-purity silica at 3.0 mm × 250 mm and a 5 µm particle size) significantly improved the separation between Miang catechins in the presence of acid in the mobile phase within a shorter analysis time. The validation method showed effective linearity, precision, accuracy, and limits of detection and quantitation. The validated system was adequate for the qualitative and quantitative measurement of seven active catechins, including gallic acid and caffeine in Miang, during the fermentation process and standardization of Miang extracts. The latter contain catechins and related compounds that are further developed into natural active pharmaceutical ingredients (natural APIs) for cosmeceutical and nutraceutical products.
Asunto(s)
Catequina/análisis , Cromatografía Líquida de Alta Presión/métodos , Cromatografía Líquida de Alta Presión/normas , Extractos Vegetales/análisis , Extractos Vegetales/química , Estudios de Validación como Asunto , Cafeína/análisis , Camellia sinensis/química , Catequina/análogos & derivados , Técnicas de Química Analítica , Ácido Gálico/análisis , Hojas de la Planta/química , Estándares de Referencia , TailandiaRESUMEN
A monolithic rod of polyurethane foam-[4-(2-pyridylazo) resorcinol] (PUF-PAR) as a simple chemical sensor for lead assays with smartphone detection and image processing was developed. With readily available simple apparatus such as a plastic cup and a stirrer rod, the monolithic PUF rod was synthesized in a glass tube. The monolithic PUF-PAR rod could be directly loaded by standard/sample solution without sample preparation. A one-shot image in G/B value from a profile plot in ImageJ for a sample with triplicate results via a single standard calibration approach was obtained. A linear single standard calibration was: [G/B value] = -0.038[µg Pb2+] + 2.827, R2 = 0.95 for 10-30 µg Pb2+ with a limit of quantitation (LOQ) of 33 µg L-1. The precision was lower than 15% RSD. The proposed method was tested by an assay for Pb2+ contents in drinking water samples from Bangkok. The results obtained by the proposed method agree with those of ICP-OES and with 100-120% recovery, demonstrating that the method is useful for screening on-site water monitoring.
RESUMEN
A modern chemical sensor system (M-CSS) was developed for the cost-effective chemical analysis of Thai precision and sustainable agriculture (TPSA), which is suitable in rural Thailand and elsewhere. The aim of this study was to achieve precision and sustainable agriculture (P-SA). The M-CSS functions according to the International Union of Pure and Applied Chemistry (IUPAC) definition and incorporates information and communication technologies (ICTs). The developed chemical sensor in the M-CSS is based on a colorimetric determination by a smart device/smartphone. Additionally, the preparation of soil samples was investigated. Soil samples of optimal conditions were extracted using an acid extractant in the ratio of one to two (extract to soil sample). Then, phosphate-phosphorous and potassium were detected with the M-CSS, which showed an excellent correlation with the standard reference methods. Interestingly, it is noteworthy that the at-site analysis of the developed method could detect a greater nitrate-nitrogen content than that of the standard reference method. The developed cost-effective analysis for the plant macronutrient content in the soil, including nitrate-nitrogen, phosphate-phosphorous, and potassium, was demonstrated for organic vegetable farms at the real P-SA research site in Northern Thailand. The obtained results can guide the management of the application of fertilizers. The proposed M-CSS exhibited the potential to be used for at-site soil macronutrient analysis and represents the starting point of Thai precision and sustainable agriculture (TPSA).
RESUMEN
A simple flow injection FlameAAS for lead determination with an alginate-polyurethane composite (ALG-PUC) monolithic in-valve column has been developed. The ALG-PUC monolithic rod was prepared by mixing methylene diphenyl diisocyanate with polyol and sodium alginate with the ratio of 2:1:1 by weight for a 5 min polymerization reaction. It was then put into a column (0.8 cm i.d × 11 cm length) situated in a switching valve for the FI set up. A single standard calibration could be obtained by plotting the loaded µg Pb2+ vs. FI response (absorbances). The loaded µg Pb2+ is calculated: µg Pb2+ = FRload × LT × CPb2+, where the FR load is the flow rate of the loading analyte solution (mL min-1), LT is the loading time (min), and CPb2+ is the Pb2+ concentration (µg mL-1). A linear calibration equation was obtained: FI response (absorbances) = 0.0018 [µg Pb2+] + 0.0032, R2 = 0.9927 for 1-150 µg Pb2+, and RSD of less than 20% was also obtained. Application of the developed procedure has been demonstrated in real samples.
RESUMEN
A low-cost and reliable analytical method based on the combination of a newly designed sticker-plastic sheet platform, digital image-based colorimetry and down scaled Kjeldahl digestion is proposed for the determination of protein content in food samples. The yellowish-brown colloidal products, obtained from the reaction between the ammonium-nitrogen after digestion and the working Nessler's reagent on the miniaturized sticker-plastic sheet platform, were captured for imaging with a smartphone camera. The operational parameters and reaction conditions were optimized. A down scaled Kjeldahl digestion procedure was performed using the newly designed digestion block. The parameters influencing the digestion efficiency, including the mass of the sample, volume of acid, mass of the catalyst and digestion time, were evaluated. Under the selected conditions, a linear calibration in the range of 5-60 mg L-1 ammonium-nitrogen was obtained with limits of detection and quantification of 2.8 and 7.6 mg L-1, respectively. The repeatability and reproducibility were 6.7% and 8.8%, respectively. The accuracy of the proposed method was evaluated by applying the developed procedure for milk powder and feeding stuff reference materials and comparing it with the conventional Kjeldahl method. The proposed method was successfully applied for the determination of protein contents in soy foods and protein-based foods. The results agreed well with those obtained from the conventional Kjeldahl method.
RESUMEN
A simple cost-effective moving drop device, with solenoid valves control for programmable liquid handling, was developed for electrokinetic injection in capillary zone electrophoresis (CZE). With a CZE of 50-µm bore fused silica capillary tube and contactless conductivity detector (C4D), mixed anions (Cl-, NO3-, and SO42- as the model) solution was injected at the ground side. Simultaneous quantitative chemical analysis can be achieved. A linear relationship of concentration and the peak height was achieved in the range of 0.5-10 mg L-1 for each anion, with LOD and LOQ being 0.02 mg L-1 and 0.5 mg L-1, respectively. The MVD-CZE system allows continuous operation with a sample throughput of 40 samples/hour. A real sample application was demonstrated for air samples, with one drop (25 µL) collected from a midget bubbler based air sampling unit. The recoveries were found to be 74.4-115.0 %. The developed device was also preliminarily applied for the injection of mixed cations (NH4+, Na+, K+, Ca2+, and Mg2+) at the high voltage side end with optimistic results.
RESUMEN
A mono-segmented sequential injection lab-at-valve (SI-LAV) system for the determination of albumin, glucose, and creatinine, three key biomarkers in diabetes screening and diagnosis, was developed as a single system for multi-analyte analysis. The mono-segmentation technique was employed for in-line dilution, in-line single-standard calibration, and in-line standard addition. This made adjustments to the sample preparation step easy unlike the batch-wise method. The results showed that the system could be used for both fast reaction (albumin) and slow reaction (glucose with enzymatic reaction and creatinine). In the case of slow reaction, the analysis time could be shortened by using the reaction rate obtained with the SI-LAV system. This proposed system is for cost-effective and downscaling analysis, which would be applicable for small hospitals and clinics in remote places with a small number of samples but relatively fast screening would be needed.
Asunto(s)
Técnicas de Laboratorio Clínico/instrumentación , Creatinina/análisis , Glucosa/análisis , Albúmina Sérica Humana/análisis , Técnicas de Química Analítica/instrumentación , Técnicas de Química Analítica/métodos , Técnicas de Laboratorio Clínico/métodos , HumanosRESUMEN
Magnetic ion-selective colorimetric microspheres based on surface modification of polystyrene beads (0.8⯵m diameter) are reported for the first time. The common components of ion-selective optode sensing (chromoionophore, ion-exchanger and ionophore) and magnetic nanoparticles are adsorbed onto the surface of the polystyrene particles using a simple mixed solvent method. The average diameter of the magnetic microspheres is evaluated by dynamic light scattering as 0.79⯱â¯0.06⯵m. The reversible microsensors are circulated by flow and accumulated at a single spot by an applied magnet to become observable by digital camera. Hue signals are extracted from the recorded images to quantify the ratio of protonated and deprotonated form of the chromoionophore, which is the basis for optode response. The resulting magnetic microsensors respond to K+ with excellent selectivity over the range of 10-6â¯M to 10-2â¯M and a response time of t99â¯<â¯2.6±0.5â¯min above 10-5â¯M. The use of solvatochromic dyes as pH independent transducers was not successful in this application.