Simvastatin loaded chitosan guided bone regeneration membranes stimulate bone healing.

BACKGROUND AND OBJECTIVE: Electrospun chitosan membranes (ESCM) modified with short-chain fatty acids have the ability to control the release of simvastatin (SMV), an anti-cholesterol drug with osteogenic potential, for guided bone regeneration (GBR) applications. This study evaluated in vivo osteogenic effects of rapid short release of SMV (4 weeks) vs long sustained release (8 weeks) from acetic anhydride (AA)-and hexanoic anhydride (HA)-modified ESCMs, respectively. METHODS: AA ESCMs loaded with 10 or 50 µg SMV and HA ESCMs loaded with 50 µg SMV were evaluated for biocompatibility and bone formation at 4 and 8 weeks, in 5 mm critical size rat calvarial defects, using histological evaluation and micro-CT analysis. RESULTS: No severe inflammatory response was noticed around the ESCMs. Less hydrophobic AA membranes showed signs of resorption by week 4 and were almost completely resorbed by week 8 whereas the more hydrophobic HA membranes resorbed slowly, remaining intact over 8 weeks. In micro-CT analysis, 10 µg SMV-loaded AA membranes did not show significant bone formation as compared to non-loaded AA membranes at either evaluation time points. 50 µg SMV-loaded AA membranes stimulated significantly more bone formation than non-loaded AA membranes by week 4 (%bone = 31.0 ± 5.9% (AA50) vs 18.5 ± 13.7% (AA0)) but showed no difference at week 8. HA membranes with 50 µg SMV showed significantly more bone formation as compared to corresponding non-loaded membranes by week 8 (%bone = 61.7 ± 8.9% (HA50) vs 33.9 ± 29.7% (HA0)), though such an effect was not significant at week 4. CONCLUSION: These results indicate that modified ESCMs may be used to control the release of SMV and promote bone healing in GBR applications.

Characterization of trimethyl chitosan/polyethylene glycol derivatized chitosan blend as an injectable and degradable antimicrobial delivery system.

Advanced local delivery systems are needed as adjunctive treatments for severe injuries with high infection rates, such as open fractures. Chitosan systems have been investigated as antimicrobial local delivery systems for orthopaedic infection but possess mismatches between elution and degradation properties. Derivatives of chitosan were chosen that have enhanced swelling ratios or tailorable degradation properties. A combination of trimethyl chitosan and poly(ethylene glycol) diacrylate chitosan was developed as an injectable local delivery system. Research objectives were elution of antimicrobials for 7 days, degradation as open fractures heal, and cytocompatibility. The derivative combination eluted increased active concentrations of vancomycin and amikacin compared to the non-derivatized chitosan paste, 6 vs. 5 days and 5 vs. 4 days, respectively. The derivative combination degraded slower than non-derivatized paste in an enzymatic degradation study, 14 vs. 3 days, which increased antimicrobial delivery duration. Cytocompatibility of the combination with fibroblast and pre-osteoblast cells exceeds the cell viability standard set in ISO 10993-5. Combination paste requires an increased ejection force of 9.40 N (vs. 0.64 N), but this force was within an acceptable injection force threshold, 80 N. These preliminary results indicate combination paste should be further developed into a clinically useful adjunctive local delivery system for infection prevention.

Poly(amine) modified kaolinite clay for VOC capture.

Polyethylenimine (PEI) functionalized kaolinite clay was successfully prepared, characterized, and assessed for the remediation of volatile organic compounds (VOCs) comprising the aldehyde, carboxylic acid, and disulfide functional group classes. A gas chromatographic vapor capture assay evaluated the capability of unmodified and modified clay material to capture representative aldehyde, carboxylic acid, and disulfide VOCs in a laboratory setting. Unmodified kaolinite (Kao) clay was moderately or poorly effective at remediating these VOCs, while the poly(amine) functionalized Kao was capable of capturing VOCs in the vapor phase with reductions up to 100%. Sample cartridge tubes were packed with PEI-functionalized clay in order to assess their ability to reduce the detectable volatile fatty acid load at an open-air rendering plant in a relevant field test for applying these materials in a packed-bed scrubber application. The PEI-Kao packed cartridges were capable of significantly reducing the detectable concentration of volatile fatty acid effluent from the rendering operation. These volatile fatty acids are major contributors to nuisance odors associated with rendering.

Nanotechnology for Environmental Remediation: Materials and Applications.

Environmental remediation relies mainly on using various technologies (e.g., adsorption, absorption, chemical reactions, photocatalysis, and filtration) for the removal of contaminants from different environmental media (e.g., soil, water, and air). The enhanced properties and effectiveness of nanotechnology-based materials makes them particularly suitable for such processes given that they have a high surface area-to-volume ratio, which often results in higher reactivity. This review provides an overview of three main categories of nanomaterials (inorganic, carbon-based, and polymeric-based materials) used for environmental remediation. The use of these nanomaterials for the remediation of different environmental contaminants-such as heavy metals, dyes, chlorinated organic compounds, organophosphorus compounds, volatile organic compounds, and halogenated herbicides-is reviewed. Various recent examples are extensively highlighted focusing on the materials and their applications.

Target-Specific Capture of Environmentally Relevant Gaseous Aldehydes and Carboxylic Acids with Functional Nanoparticles.

Aldehyde and carboxylic acid volatile organic compounds (VOCs) present significant environmental concern due to their prevalence in the atmosphere. We developed biodegradable functional nanoparticles comprised of poly(d,l-lactic acid)-poly(ethylene glycol)-poly(ethyleneimine) (PDLLA-PEG-PEI) block co-polymers that capture these VOCs by chemical reaction. Polymeric nanoparticles (NPs) preparation involved nanoprecipitation and surface functionalization with branched PEI. The PDLLA-PEG-PEI NPs were characterized by using TGA, IR, (1) H NMR, elemental analysis, and TEM. The materials feature 1°, 2°, and 3° amines on their surface, capable of capturing aldehydes and carboxylic acids from gaseous mixtures. Aldehydes were captured by a condensation reaction forming imines, whereas carboxylic acids were captured by acid/base reaction. These materials reacted selectively with target contaminants obviating off-target binding when challenged by other VOCs with orthogonal reactivity. The NPs outperformed conventional activated carbon sorbents.