A coumarin-based "turn-on" fluorescent sensor for the determination of Al3+: single crystal X-ray structure and cell staining properties.

An efficient Al(3+) receptor, 6-(2-hydroxybenzylideneamino)-2H-chromen-2-one (HBC), has been synthesized by condensing salicylaldehyde with 6-aminocoumarin. The molecular structure of HBC has been determined by a single crystal X-ray analysis. It was established that in the presence of Al(3+), HBC shows 25 fold enhancement of fluorescence intensity which might be attributed to the chelation-enhanced fluorescence (CHEF) process. HBC binds Al(NO3)3 in a 1 : 1 stoichiometry with a binding constant (K) of 7.9 × 10(4) M(-1). Fe(3+) and Mn(2+) quench the emission intensity of the [HBC + Al(3+)] system to an insignificant extent at a concentration 10 times higher compared to that of Al(3+). HBC is highly efficient in the detection of intracellular Al(3+) under a fluorescence microscope.

Cd(II)-triggered excimer-monomer conversion of a pyrene derivative: time dependent red-shift of monomer emission with cell staining application.

An efficient fluorescent probe (E)-N1-((E)-2-((pyren-7-yl)methyleneamino)ethyl)-N2-((pyren-7-yl)methylene)ethane-1,2-diamine (L) has been synthesized by a facile one-step condensation reaction. L can selectively detect Cd(2+) in presence of other common metal ions in 0.1 M HEPES buffered DMSO-water (4 : 1, v/v) medium. The detection limit of Cd(2+) is 1.8 × 10(-8) M. Cd(2+) can effectively convert the excimer emission of L into its monomer emission which in turn exhibits a time-dependent red-shift.

Nickel(II)-induced excimer formation of a naphthalene-based fluorescent probe for living cell imaging.

Ni(2+)-induced intramolecular excimer formation of a naphthalene-based novel fluorescent probe, 1-[(naphthalen-3-yl)methylthio]-2-[(naphthalen-6-yl)methylthio]ethane (L), has been investigated for the first time and nicely demonstrated by excitation spectra, a fluorescence lifetime experiment, and (1)H NMR titration. The addition of Ni(2+) to a solution of L (DMSO:water = 1:1, v/v; λ(em) = 345 nm, λ(ex) = 280 nm) quenched its monomer emission, with subsequent enhancement of the excimer intensity (at 430 nm) with an isoemissive point at 381 nm. The fluorescence lifetime of free L (0.3912 ns) is much lower than that of the nickel(2+) complex (1.1329 ns). L could detect Ni(2+) as low as 1 × 10(-6) M with a fairly strong binding constant, 2.0 × 10(4) M(-1). Ni(2+)-contaminated living cells of plant origin could be imaged using a fluorescence microscope.

A naphthalene exciplex based Al3+ selective on-type fluorescent probe for living cells at the physiological pH range: experimental and computational studies.

2-((Naphthalen-6-yl)methylthio)ethanol (HL) was prepared by one pot synthesis using 2-mercaptoethanol and 2-bromomethylnaphthalene. It was found to be a highly selective fluorescent sensor for Al(3+) in the physiological pH (pH 7.0-8.0). It could sense Al(3+) bound to cells through fluorescence microscopy. Metal ions like Mn(2+), Fe(3+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Ag(+), Cd(2+), Hg(2+), Cr(3+) and Pb(2+) did not interfere. No interference was also observed with anions like Cl(-), Br(-), F(-), SO(4)(2-), NO(3)(-), CO(3)(2-), HPO(4)(2-) and SCN(-). Experimentally observed structural and spectroscopic features of HL and its Al(3+) complex have been substantiated by computational calculations using density functional theory (DFT) and time dependent density functional theory (TDDFT).

Thiophene anchored coumarin derivative as a turn-on fluorescent probe for Cr3+: cell imaging and speciation studies.

A thiophene-coumarin hybrid molecule, (6E)-6-((thiophen-2-yl)methyleneamino)-2H-chromen-2-one (TMC) has been prepared and its single crystal X-ray structure is reported. TMC can selectively detect Cr(3+) in presence of other common cations. Both TMC and its Cr(3+) complex are well characterized by different spectroscopic techniques like (1)H NMR, QTOF-MS ES(+), FTIR and elemental analysis as well. TMC exhibits fluorescence enhancement upon binding Cr(3+) in CH(3)CN-HEPES buffer (0.02 M, pH 7.4) (4:6, v/v) medium. Detection limit of the method is 1 × 10(-6)M. Binding constant is estimated with the Benesi-Hildebrand method and the value 8 × 10(4) indicates a fairly strong interaction between TMC and Cr(3+). Speciation studies have been performed in a fast and environment friendly way using least sample volume, less hazardous chemicals and solvents. Cr(3+) assisted restricted rotation around the imine bond and inhibited photo-induced electron transfer from the N,S-donor sites to the coumarin unit are responsible for fluorescence enhancement. TMC is capable to detect intracellular Cr(3+) in living cells.

Highly selective organic fluorescent probe for azide ion: formation of a "molecular ring".

An indole based naphthalene derivative is reported as a highly selective fluorescent probe for azide ion in aqueous ethanol. The probe is applied for cell imaging of the N(3)(-) ion in contaminated living cells. Both experimental and theoretical studies have been performed to figure out the plausible mechanism of fluorescence enhancement of the probe upon binding with N(3)(-).

2-(2-Pyridyl) benzimidazole based Co(II) complex as an efficient fluorescent probe for trace level determination of aspartic and glutamic acid in aqueous solution: a displacement approach.

A weakly fluorescent cobalt(II) complex is synthesized using 2-(2-pyridyl)-benzimidazole (PBI) as a chelating fluorescent ligand and characterized by single crystal X-ray structure. This complex serves as an efficient fluorescent probe for trace level determination of aspartic acid (AspA) and glutamic acid (GluA) in aqueous solution. Rest of the naturally occurring amino acids did not interfere. Both aspartic acid and glutamic acid replaces PBI from the coordination sphere of Co(II)-PBI complex resulting appearance of strong fluorescence signal for the released free PBI. The signal response is very fast and the interaction of both the AspA and GluA with the Co(II) is strong enough as evident from their displacement equilibrium constant values, viz. 4357.8 M(-1) and 8333.33 M(-1) respectively.

Vanillin-coumarin hybrid molecule as an efficient fluorescent probe for trace level determination of Hg(II) and its application in cell imaging.

An efficient Hg(2+) selective fluorescent probe (vanillin azo coumarin, VAC) was synthesized by blending vanillin with coumarin. VAC and its Hg(2+) complex were well characterized by different spectroscopic techniques like (1)H NMR, QTOF-MS ES(+), FTIR and elemental analysis as well. VAC could detect up to 1.25 µM Hg(2+) in aqueous methanol solution through fluorescence enhancement. The method was linear up to 16 µM of Hg(2+). Negative interferences from Cu(2+), Ni(2+), Fe(3+), and Zn(2+) were eliminated using EDTA as a masking agent. VAC showed a strong binding to Hg(2+) ion as evident from its binding constant value (2.2×10(5)), estimated using Benesi-Hildebrand equation. Mercuration assisted restricted rotation of the vanillin moiety and inhibited photoinduced electron transfer from the O, N-donor sites to the coumarin unit are responsible for the enhancement of fluorescence upon mercuration of VAC. VAC was used for imaging the accumulation of Hg(2+) ions in Candida albicans cells.

9-Acridone-4-carboxylic acid as an efficient Cr(III) fluorescent sensor: trace level detection, estimation and speciation studies.

9-Acridone-4-carboxylic acid has been established as an efficient Cr(III) fluorescent sensor. The binding of this ligand with Cr(III) is confirmed by FTIR, thermal and mass spectral analysis of the product. Based on this chelation assisted fluorescence quenching, a highly sensitive spectrofluorometric method is developed for trace level detection, estimation and speciation studies of chromium in DMF-water. The ligand has an excitation and emission maxima at 408 nm and 498.4 nm, respectively. The equilibrium binding constant of the ligand with Cr(III) is 8.1378 × 10(4) as calculated using Stern-Volmer equation. Up to 9 × 10(-6)mol L(-1) of [Cr(3+)], linearity has been observed. The interference of foreign ions has been found to be negligible.

Methionine-pyrene hybrid based fluorescent probe for trace level detection and estimation of Hg(II) in aqueous environmental samples: experimental and computational studies.

A new fluorescent, Hg(2+) selective chemosensor, 4-methylsulfanyl-2-[(pyren-4-ylmethylene)-amino] butyric acid methyl ester (L, MP) was synthesized by blending methionine with pyrene. It was well characterized by different analytical techniques, viz. (1)H NMR, (13)C NMR, QTOF mass spectra, elemental analysis, FTIR and UV-vis spectroscopy. The reaction of this ligand with Hg(2+) was studied by steady state and time-resolved fluorescence spectroscopy. The Hg(2+) complexation process was confirmed by comparing FTIR, UV-vis, thermal, QTOF mass spectra and (1)H NMR data of the product with that of the free ligand values. The composition (Hg(2+):L=1:1) of the Hg(2+) complex in solution was evaluated by fluorescence titration method. Based on the chelation assisted fluorescence quenching, a highly sensitive spectrofluorometric method was developed for the determination of trace amounts of Hg(2+) in water. The ligand had an excitation and emission maxima at 360 nm and 455 nm, respectively. The fluorescence life times of the ligand and its Hg(2+) complex were 1.54 ns and 0.72 ns respectively. The binding constant of the ligand, L with Hg(2+) was calculated using Benesi-Hildebrand equation and was found to be 7.5630×10(4). The linear range of the method was from 0 to 16 µg L(-1) with a detection limit of 0.056 µg L(-1) for Hg(2+). The quantum yields of the ligand and its Hg(2+) complex were found to be 0.1206 and 0.0757 respectively. Both the ligand and its Hg(2+) complex have been studied computationally (Ab-initio, Hartree Fock method) to get their optimized structure and other related physical parameters, including bond lengths, bond angles, dipole moments, orbital interactions etc. The binding sites of the ligand to the Hg(2+) ion as obtained from the theoretical calculations were well supported by (1)H NMR titration. The interference of foreign ions was negligible. This method has been successfully applied to the determination of mercury(II) in industrial waste water.