RESUMEN
BACKGROUND: The kangaroo pericardium might be considered to be a good candidate material for use in the manufacture of the leaflets of percutaneous heart valves based upon the unique lifestyle. The diet consists of herbs, forbs and strubs. The kangaroo pericardium holds an undulated structure of collagen. MATERIAL AND METHOD: A Red Kangaroo was obtained after a traffic fatality and the pericardium was dissected. Four compasses were cut from four different sites: auricular (AUR), atrial (ATR), sternoperitoneal (SPL) and phrenopericardial (PPL). They were investigated by means of scanning electron microscopy, light microscopy and transmission electron microscopy. RESULTS: All the samples showed dense and wavy collagen bundles without vascularisation from both the epicardium and the parietal pericardium. The AUR and the ATR were 150±25µm thick whereas the SPL and the PPL were thinner at 120±20µm. The surface of the epicardium was smooth and glistening. The filaments of collagen were well individualized without any aggregation, but the banding was poorly defined and somewhat blurry. CONCLUSION: This detailed morphological analysis of the kangaroo pericardium illustrated a surface resistant to thrombosis and physical characteristics resistant to fatigue. The morphological characteristics of the kangaroo pericardium indicate that it represents an outstanding alternative to the current sources e.g., bovine and porcine. However, procurement of tissues from the wild raises supply and sanitary issues. Health concerns based upon sanitary uncertainty and reliability of supply of wild animals remain real problems.
Asunto(s)
Bioprótesis , Prótesis Valvulares Cardíacas , Ligamentos/ultraestructura , Macropodidae/anatomía & histología , Pericardio/ultraestructura , Animales , Australia , Enfermedades de las Válvulas Cardíacas/cirugía , Humanos , Microscopía Electrónica de Rastreo , Microscopía Electrónica de TransmisiónRESUMEN
INTRODUCTION: Cross-linking and anti-calcification of prosthetic heart valves have been continuously improved to prevent degeneration and calcification. However, non-calcific structural deteriorations such as cuspal dehiscences along the stent still require further analysis. MATERIAL AND METHOD: Based upon the previous analysis of an explanted valve after 7 years, a fresh commercial aortic valve was embedded in poly(methyl methacrylate) (PMMA) and cut into slices to ensure the detailed observation of the assembly and material structures. A pericardial patch embossed to provide the adequate shape of the cusps was investigated after paraffin embedding and appropriate staining. The microstructural damages that occurred during manufacturing process were identified and evaluated by light microscopy, polarized microscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). RESULTS: The wavy collagen bundles, the key structure of the pericardium patch, were damaged to a great extent at suture sites along the stent and in the compressed areas around the stent post. The fixation of the embossed pericardium patch along the plots of the stent aggravated the microstructural modifications. The damages mainly appeared as the elimination of collagen bundle waviness and delamination between the bundles. CONCLUSION: Considering the modes of failure of the explant, the damages to the collagen bundles may identify the vulnerable sites that play an important role in the cusp dehiscence of heart valve implants. Such information is important to the manufacturers. Recommendations to prevent in vivo cusp dehiscence can therefore be formulated.
Asunto(s)
Válvula Aórtica/ultraestructura , Bioprótesis , Prótesis Valvulares Cardíacas , Pericardio/ultraestructura , Manejo de Especímenes/efectos adversos , Animales , Válvula Aórtica/patología , Calcinosis/prevención & control , Bovinos , Colágeno/ultraestructura , Reactivos de Enlaces Cruzados/química , Microscopía Electrónica de Rastreo , Microscopía Electrónica de Transmisión , Adhesión en Parafina , Pericardio/anatomía & histología , Pericardio/patología , Adhesión en Plástico/métodos , Polimetil Metacrilato/química , Falla de Prótesis , Manejo de Especímenes/métodos , StentsRESUMEN
INTRODUCTION: Transcathether heart valve replacement has gained considerable acceptance during the last decades. It is now part of the armamentarium for aortic valve replacement. The procedure proved to be highly efficient. However the issues of the blood compatibility and tissue durability were not raised and the adverse events were probably under-reported, according to observations of thrombosis after deployment. MATERIAL AND METHOD: Bovine pericardium leaflets were sewn inside a 26mm diameter stainless steel stent to manufacture these valves (one control and two experimental). The correlation between the trauma and the acute thombogenicity of bovine pericardium leaflets, after crimping and ballooning, was investigated via an in vitro blood flow with labeled platelets. These leaflets were processed for histology: scanning electron microscopy, light microscopy, and transmission electron microscopy. RESULTS: The control specimens showed a regular pericardium structure with some blood cells deposited on the collagen fibrous surface (inflow) and scarce blood cells deposited on the serous surface (outflow). After crimping and ballooning, the structure of the pericardium was severely injured, eventually with delaminations and ruptures. The blood cell uptake was considerably increased compared to the control. CONCLUSION: It would therefore be appropriate to pay more attention to the design of the valves. Specifically, the incorporation of a buffer tissue or fabric between the pericardium and the metallic stent is suggested. The issue of ballooning deserves detailed and in depth investigation regarding the lifetime of the device.
Asunto(s)
Valvuloplastia con Balón/instrumentación , Bioprótesis/efectos adversos , Prótesis Valvulares Cardíacas/efectos adversos , Diseño de Prótesis/efectos adversos , Trombosis/etiología , Reemplazo de la Válvula Aórtica Transcatéter/instrumentación , Animales , Válvula Aórtica/cirugía , Circulación Sanguínea , Bovinos , Voluntarios Sanos , Humanos , Microscopía Electrónica de Rastreo , Microscopía Electrónica de Transmisión , Pericardio/patología , Pericardio/cirugía , Pericardio/ultraestructura , Stents/efectos adversos , Propiedades de Superficie , Trombosis/prevención & control , Reemplazo de la Válvula Aórtica Transcatéter/efectos adversosRESUMEN
INTRODUCTION: Prior to deployment, the percutaneous heart valves must be crimped and loaded into sheaths of diameters that can be as low as 6mm for a 23mm diameter valve. However, as the valve leaflets are fragile, any damage caused during this crimping process may contribute to reducing its long-term durability in vivo. MATERIAL AND METHOD: Bovine pericardium percutaneous valves were manufactured as follows. The leaflets were sutured on a nitinol frame. A polyester cuff fabric served as a buffer between the pericardium and the stent. Two valves were crimped and one valve was used as control. The valves were examined in gross observation and micro-CT scan and then the leaflets were processed for histology and analyzed in scanning electron microscopy, light microscopy and transmission electron microscopy. RESULT: Crimping of the valves resulted in the increase thickness of the leaflets and there was no evidence of additional delamination. The heavy prints of the stents were irregularly distributed on the outflow surface in the crimped devices and were shallow and did not penetrate throughout the thickness of the leaflets. However, the wavy microscopy of collagen fiber bundles was well preserved. They were found to remain individualized without any agglutination as shown by the regular banding appearance. CONCLUSION: Crimping of self-deployable valves per se caused only minor damages to the leaflets. However, the procedure could be refined in order to minimize areas of high pressure and swelling of the tissue that can be accompanied with flow surface disruption and increase of the hydraulic conductance. The incorporation of a polyester buffer serves to prevent the deleterious effects that may be caused if the pericardium tissue were in direct contact with the nitinol stent.
Asunto(s)
Válvula Aórtica/cirugía , Bioprótesis , Prótesis Valvulares Cardíacas , Procedimientos Quirúrgicos Mínimamente Invasivos/instrumentación , Reemplazo de la Válvula Aórtica Transcatéter/instrumentación , Aleaciones/efectos adversos , Animales , Bovinos , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Microscopía Electrónica de Transmisión , Procedimientos Quirúrgicos Mínimamente Invasivos/métodos , Pericardio , Poliésteres , Stents/efectos adversosRESUMEN
An eluting-stent system with mAb dispersed in the PLLA (poly (L-lactic acid)) was validated in vitro. Specifically designed spray equipment based on the principle of ultrasonic atomization was used to produce a thin continuous PLLA (poly (L-lactic acid)) polymer coating incorporating monoclonal antibody (mAb). This PLLA coating was observed in light microscopy (LM) and scanning electron microscopy (SEM). The concentration of the monoclonal antibody (mAb) to the platelet glycoprotein (GP) IIIa receptor and the eluting rate were then measured by a radioisotope technique with (125)I-labelled GP IIIa mAb. An in vitro perfusion circuit was designed to evaluate the release rates at different velocities (10 or 20 ml min(-1)). The PLLA coating was thin and transparent, uniformly distributed on the surface of the stent. Three factors influenced its thickness: PLLA concentration, duration and gas pressure. The concentration of mAb was influenced by the duration of absorption and the concentration of the mAb solution; the maximum was 1662.23 + or - 38.83 ng. The eluting rate was fast for the first 2 h, then decreased slowly and attained 80% after 2 weeks. This ultrasonic atomization spray equipment and technological process to prepare protein eluting-stents were proved to be effective and reliable.
Asunto(s)
Anticuerpos Monoclonales/administración & dosificación , Stents Liberadores de Fármacos , Integrina beta3/inmunología , Ácido Láctico , Polímeros , Anticuerpos Monoclonales/inmunología , Ácido Láctico/química , Poliésteres , Polímeros/química , UltrasonidoRESUMEN
Drug-eluting stents (DES) have emerged as a recognized alternative to treat stent restenosis but many questions remain regarding the optimal type and eluting characteristics of both drug and stent. The first component of the study examines the extent of surface coating of PLLA (poly(L-lactic acid)) on a Nitinol stent. The second characterizes the adsorption and elution rates of monoclonal mouse anti-human platelet glycoprotein (GP) IIIa antibody SZ-21 from a PLLA-coated surface. The PLLA coating was examined by fluorescence staining and image analysis using the Image Processing Box of MATLAB. Stents exposed to the monoclonal mouse anti-human platelet GP IIIa antibody were tested for their adsorption characteristics by radioisotope technique with (125)I-labelled SZ-21. The elution rates were then measured in looped circuits at different velocities (10 or 20 ml/min) and durations (30 min up to 312 h). Results showed that the fluorescence staining and image analysis showed a striking difference in the extent of coating between PLLA-coated stents and SZ-21 eluting stents on the gray-scale distribution of Nitinol surfaces. The amount of SZ-21 adsorbed onto the PLLA-coated stents was dependent on the concentration and duration of immersion in the solution. The method of preparation the mAb eluting stent significantly influenced the elution characteristics for a continuous perfusion of more than 300 h. The eluting curve was biphasic with initial rapid elution for the first 24 h followed by a gradual slow elution. These results indicate that the Image Processing Box of MATLAB appears to be a useful method for semi-quantitative analysis of fluorescence images. Furthermore, SZ-21 can be passively adsorbed onto PLLA-coated stents and predictably influenced by the concentration and duration of immersion. These studies may pave the way to developing stent-based delivery of a potent anti-platelet agent.
Asunto(s)
Anticuerpos Monoclonales/administración & dosificación , Stents Liberadores de Fármacos , Integrina beta3/inmunología , Ácido Láctico/química , Inhibidores de Agregación Plaquetaria/administración & dosificación , Polímeros/química , Aleaciones/química , Animales , Anticuerpos Monoclonales/química , Anticuerpos Monoclonales/inmunología , Plaquetas/química , Humanos , Ácido Láctico/análisis , Ratones , Inhibidores de Agregación Plaquetaria/química , Inhibidores de Agregación Plaquetaria/inmunología , Poliésteres , Polímeros/análisis , Propiedades de Superficie , Factores de TiempoRESUMEN
The authors aimed to assess the surface modification effects of plasma coatings on biocompatibility of nitinol intravascular stent in terms of anticoagulation, haemocytolysis rate, hydrophilicity, cytotoxicity and so on. In order to improve their surface adhesive properties to endothelial cells, NiTi alloy intravascular stents were treated and coated using a low-temperature plasma deposition technique. It was found that plasma coating changed the surface morphology of the stents to a micron-level surface roughness in the range of 1-5 microm. In comparison with the untreated control, the plasma-treated NiTi alloy intravascular stents showed increased surface hydrophilicity and enhanced anticoagulation property. Testing results on plasma-coated NiTi stents indicated that they complied with the standard of national biologic safety evaluation of medical apparatus and instrument (GB/T16886-1997, People's Republic of China) in terms of haemocytolysis rate, cytotoxicity and pyretogen.
Asunto(s)
Aleaciones/química , Materiales Biocompatibles Revestidos/química , Plasma/química , Stents/normas , Materiales Biocompatibles Revestidos/normas , Humanos , Interacciones Hidrofóbicas e Hidrofílicas , Ensayo de Materiales , Propiedades de SuperficieRESUMEN
The purpose of this investigation was to establish monoclonal cell lines of HUVEC with the stable expression of the VEGF(121) gene. Such cells are likely to better adhere to the luminal surface of stents or grafts and to promote a complete endothelialization. The eukaryotic expression vector PCD(2)-VEGF(121) was transfected into cell lines of HUVEC mediated by lipofect AMINE. The positive clones were obtained by the screening of G(418). The transcription and expression of the VEGF gene were investigated by RT-PCR and immunocytochemistry, respectively. The experiment of Miles was applied for the assay of the biological activity of the protein of the VEGF produced by the HUVEC lines with transfected PCD(2)-VEGF(121). The growth curve was made for comparison with that of non-transfected HUVEC line cells. The positive clone cells from which transcripted the mRNA of VEGF(121) gene were obtained by RT-PCR. The positive results of the immunocytochemistry were found and the high biological activity of VEGF in the media was detected in the positive clone cells only. The time to achieve the multiplication of the positive clone cells by a factor of 2 was shorter than that of the non-transfected HUVEC line calculated from the growth curve. The HUVEC line of monoclonal cells with the stable expression of VEGF(121) gene has been established successfully and can be employed on the luminal surfaces of foreign blood conduits.
Asunto(s)
Materiales Biocompatibles Revestidos , Endotelio Vascular/fisiología , Stents , Ingeniería de Tejidos , Arterias Umbilicales/citología , Factor A de Crecimiento Endotelial Vascular/genética , Factor A de Crecimiento Endotelial Vascular/metabolismo , Secuencia de Bases , Adhesión Celular , División Celular , Línea Celular , Expresión Génica , Humanos , Plásmidos , Reacción en Cadena de la Polimerasa de Transcriptasa Inversa , Ingeniería de Tejidos/instrumentación , Ingeniería de Tejidos/métodos , TransfecciónRESUMEN
Problems of displacement, poor healing, degradation of the polymers and corrosion of the metallic frame in endovascular devices still require in-depth investigations. As the tissues and the foreign materials are in close contact, it is of paramount importance to efficiently investigate the interfaces between them. Inclusion in polymethymethacrylate (PMMA) permits us to obtain thin slides and preserve the capacity to perform the appropriate stainings. An AneuRx prosthesis was harvested in bloc with the surrounding tissues at the autopsy of a patient 25 months post deployment in a 5.7 cm diameter AAA and sectioned in the direction of the blood flow in two halves. A cross-section of the encapsulated distal segment together with the surrounding aneuryshmal sac was embedded in polymethylmethacrylate (PMMA). Further to complete polymerization, slices of the specimen were cut on a precision banding saw under coolant. They were affixed onto methacrylate slides with a UV cured adhesive. Binding and polishing were done on a numeric grinder and slices 25 to 30 microm in thickness were stained with toluidine blue prior to observation in light microscopy. Additional slices were prepared for scanning electron microscopy and X-ray energy dispersive spectrometry for determination of the elemental composition of the Nitinol stent. The aortic wall did not demonstrate complete integrity along with its circumference. Some areas of rupture were noted. The content of the sac was heavily shrunk and was mostly acellular. The walls of the device were very well encapsulated. The PMMA embedding permitted the polyester wall, the Nitinol wire and the collagen to keep in close contact. Scanning electron microscopy involved backscattered electrons and confirmed the corrosion the Nitinol wire at the boundary with living tissues. Based upon the results obtained, we believe that PMMA embedding is the most appropriate method to process endovascular devices for histological and material investigation. Needless to say, that paraffin embedding would have not been feasible for such a big size specimen involving different materials.
Asunto(s)
Prótesis Vascular , Polimetil Metacrilato , Adhesión del Tejido/métodos , Conservación de Tejido/métodos , Anciano , Aneurisma de la Aorta Abdominal/patología , Aneurisma de la Aorta Abdominal/cirugía , Cuerpos Extraños , Humanos , Masculino , Ensayo de Materiales , Prótesis e Implantes , StentsRESUMEN
Optimizing endothelial cell growth and adhesion on the surface of metallic stents implanted in the vascular system is a fundamental issue in understanding and improving their long-term biocompatibility. The ability of the endothelial cell to attach and adhere to the luminal stent surface as well as the capacity to withstand the significant shear stress associated with blood flow are important determinants. The adhesive characteristics of human umbilical vein endothelial cellsectin (HUVEC) on stent surfaces coated with either Poly-L-Lysine (PLL) or fibron (FN) were compared with uncoated controls. Increasing concentrations of PLL and FN were measured using a micropipette aspiration system. The adhesivenamic properties of HUVECs under static flow conditions were compared to a dy environment on endovascular stents using a parallel-plate-flow chamber. A scanning electron microscope picture was used to measure the number and the adhesive cell ratio as well as the percentage of surface coverage of stent by endothelial cells. The adhesive forces of HUVECs on foreign surfaces coated with PLL and FN were higher compared to uncoated surfaces, and were dependent on incr ing concentrations. These coatings resulted in significant increase of the adhesive force of HUVECs. The influence of substrates on the adhesion of the endothelial cell monolayer under static or dynamic flow conditions was highly significant compared with controls (p<0.01). No significant differences were observed between PLL and FN substrates. Both PLL and FN coated surfaces can significantly increase the adhesion and growth of HUVECs on metallic stent surfaces.
Asunto(s)
Materiales Biocompatibles Revestidos , Células Endoteliales , Fibronectinas , Polilisina , Stents , Venas Umbilicales , Adhesión Celular , Células Cultivadas , Células Endoteliales/citología , Fibronectinas/química , Humanos , Ensayo de Materiales/métodos , Polilisina/química , Venas Umbilicales/citologíaRESUMEN
Information that can be obtained by magnetic resonance imaging (MRI) of explanted endovascular devices must be validated as this method is non-destructive. Histology of such a device together with its encroached tissues can be elegantly performed after polymethymethacrylate (PMMA) embedding, but this approach requires destruction of the specimen. The issue is therefore to determine if the MRI is sufficient to fully validate an explanted device based upon the characterization of an explanted specimen. An AneuRx device deployed percutaneously 25 months earlier in a 75-year-old patient was removed en bloc at autopsy together with the surrounding aneurysmal sac and segments of the upstream and downstream arteries. Macroscopic pictures were taken and a slice of the cross-section was processed for histology after polymethylmethacrylate (PMMA) embedding. For the magnetic resonance imaging investigation, the device was inserted in a Biospec 4.7 T MRI system with a 20 mm diameter birdcage resonator used for both emission and reception. A Spin-Echo (SE) was used to acquire both T1 proton density (PD) and T2 weighted images. A gradient-echo (GE) sampling of a free induction decay (GESFID) was used to generate multiple GE images using a single excitation pulse so that four images at different TE were obtained in the same acquisition. The selected explanted device was outstandingly well-healed compared to most devices harvested from humans. No inflammatory process was observed in contact or at distance of the materials. In MRI T1 images display no specific contrast and were homogeneous in the different tissues. The contrast was improved on proton density weighed images. On the T2 weighed images, the different areas were well identified. The diffusion images displayed in the surrounding B region had the greatest diffusion coefficient and the greatest anisotropy. The MRI analysis of the explanted AneuRx device illustrates the possibilities of this technique to characterize the interaction of the endovascular graft with the surrounding tissues. MRI is a breakthrough to investigate explanted medical devices but it also can be advantageously used in vivo to obtain virtual biopsies, because real biopsies to determine the 3 Bs (biocompatibility, biofunctionality and bioresilience) cannot be carried out as they could obviously initiate infection and degradation of the foreign materials.
Asunto(s)
Arterias/patología , Biopsia/métodos , Imagen por Resonancia Magnética/métodos , Stents , Anciano , Arterias/química , Humanos , Masculino , Microscopía , Polimetil Metacrilato/químicaRESUMEN
OBJECTIVE: Magnetic resonance imaging (MRI) is an established modality in clinical use but may be potentially underutilized to visualize and investigate biomaterials. As its use is totally contraindicated only for ferromagnetic devices, it was employed to visualize deployment, biofonctionality, healing, and biodurability of a commercially available endovascular device, namely the Medtronic-AVE AneuRx. The quality of the observations coupled with the absence of ionizing radiations are likely to make this technique an attractive imaging modality in the future. METHOD: The potential benefits of the MRI technique were investigated in a GE Vectra-MR 0.5T MRI for the Medtronic-AVE AneuRx endovascular prosthesis, under different conditions: undeployed i.e., inserted in the delivery cartridge as received from the manufacturer (step 1), deployed in a mock glass-aneurysm tube (step 2), and as a pathological explant harvested at the autopsy of a patient (step 3). The device was submitted to X-rays for examination in addition to MRI. At step 3, the device was further investigated with light microscopy and scanning electron microscopy (SEM) together with X-ray diffraction. RESULTS: The device which was inserted and pleated in the delivery cartridge did not demonstrate any significant observation either in MRI or in X-rays. When it was deployed in the mock aneurysmal glass tube, light artefacts were associated with the T2 weighed FSE images around the Nitinol whereas X-rays gave images of indisputable interest. Similar results were noted using the explanted device. Very high contrasts were obtained with T1 whereas T2 images were almost defect free. The X-rays allowed to accurate imaging of the Nitinol skeleton but were poor to discriminate between the different tissues. Pathology observations using light microscopy were not really challenged, as the magnetic resonance imaging was performed using a 0.5T machine. DISCUSSION: The benefits of magnetic resonance imaging as a quality control technique to examine an endovascular device within its cartridge remains ill defined. Similarly, the role of conventional X-rays is unknown. The observation of devices fully deployed in a mock aneurysmal glass-tube under MRI are potentially useful but X-rays images allowed better definition. The MRI examination of the explanted device does permit observations related to the healing of the device that might be obtained in vivo and, thus offers new avenues for the follow-up of implanted devices. The pathological investigations brought additional informations about the tissues and the corrosion of the Nitinol. However, it is unlikely that MRI will permit detailed analysis of the biomaterials and in particular the corrosion process of the stents. CONCLUSION: These early observations of the follow-up of devices using MRI warrant further investigation. The absence of ionizing radiation with MRI makes this technique particularly attractive. As there is no emission of ionizing radiation associated with magnetic resonance, it is recommended that further investigation using this environment friendly technique for the follow-up of devices made of biomaterials that are MRI compatible.
Asunto(s)
Prótesis Vascular/normas , Imagen por Resonancia Magnética/métodos , Ensayo de Materiales/métodos , Aleaciones , Aneurisma/terapia , Materiales Biocompatibles , Humanos , Ensayo de Materiales/instrumentación , Modelos Biológicos , Stents/normasRESUMEN
The most popular coronary stents are made of 316L stainless steel and self-expandable Nitinol. Nevertheless, Ta has already been used to make stents for endovascular surgery and may constitute a good alternative to the other materials because of its higher corrosion resistance and radio-opacity property, which may facilitate the follow-up of stent catheterization. The characterization of Ta and its natural passive oxide films has been performed in a 0.15 M NaCl solution (simulated body fluid - SBF) using anodic polarizations, electrochemical impedance spectroscopy and photoelectrochemical techniques. Changes in microstructure have been observed by atomic force microscopy (AFM). Polarization curves show the existence of a current density increase between 1.40 and 1.80 V. Bode complex plots show that some perturbation of the film occurred in this potential interval which may be associated with a decrease in polarization resistance, Rp, indicating that the film may be less resistant to corrosive attack. Mott-Schottky capacity measurements show that the density of donors, Nd, varies with polarization. The optical band gap, E(g), which is equal to 4.1 eV did not show variations in our experiments. The localized formation on the electrode surface, in the above potential interval of a Ta compound (possibly an oxide-hydroxide) was observed by AFM, and this may explain the appearance of the current density peak and capacity behavior at those potentials.
RESUMEN
Membranes made from 4 commercial poly(carbonate urethanes): Carbothane (CB), Chronoflex (CF), Corethane 80A (CT80), and Corethane 55D (CT55), and from 2 poly(ether urethanes): Tecoflex (TF) and Tecothane (TT) were prepared by solution casting and sterilized by either ethylene oxide (EO) or gamma radiation. Their biocompatibility was evaluated in vitro in terms of proliferation, cell viability, and adhesion characteristics of human umbilical veins (HUVEC), monocytes (THP-1), and skin fibroblasts, and by measuring complement activation through the generation of the C3a complex. Their hemocompatibility was determined by measuring the level of radiolabeled platelet, neutrophil, and fibrin adhesion in an ex vivo arteriovenous circuit study in piglets as well as via an in vitro hemolysis test. The results of this study showed no endothelial cell proliferation on any of the materials. The cell viability study revealed that the CB, CF, and TF membranes sterilized by EO maintained the highest percentage of monocyte viability after 72 h of incubation (>70%) while none of the gamma-sterilized membranes displayed any cell viability. The fibroblast adhesion and C3a generation assays revealed that none of the materials supported any cell adhesion or activated complement, regardless of the sterilization method. The hemolysis test also confirmed that the 4 poly(carbonate urethanes) were hemolytic while none of the poly(ether urethanes) were. Finally, the ex vivo study revealed that significantly more platelets adhered to the CB and CT55 membranes while the levels of neutrophil and fibrin deposition were observed to be similar for all 6 materials. In conclusion, the study identified the CF and TF membranes as having superior biocompatibility and hemocompatibility compared to the other polyurethanes.
Asunto(s)
Materiales Biocompatibles , Corazón Artificial , Membranas Artificiales , Poliuretanos , Animales , Materiales Biocompatibles/química , Sangre , Adhesión Celular , División Celular , Supervivencia Celular , Activación de Complemento , Complemento C3a/análisis , Fibrina , Fibroblastos/fisiología , Ventrículos Cardíacos , Hemólisis , Humanos , Monocitos/fisiología , Neutrófilos/fisiología , Adhesividad Plaquetaria/fisiología , Cemento de Policarboxilato/química , Poliuretanos/química , Diseño de Prótesis , Piel/citología , Esterilización , Porcinos , Venas Umbilicales/citologíaRESUMEN
The present retrospective analysis of 117 surgically excised anterior cruciate ligament (ACL) prostheses was designed to elucidate the etiology and mechanisms of failure of synthetic ligamentous prostheses. They were harvested from young and active patients (26 +/- 7 yrs) at various orthopaedic centers in France between 1983 and 1993. The average duration of implantation of augmentation and replacement prostheses were 21.5 +/- 12.6 and 33.2 +/- 25.3 months, respectively. The principal causes for their excision were ruptures and synovitis. Each ACL prosthesis was examined macroscopically, histologically, and, after tissue removal, by scanning electron microscopy (SEM) to determine the model, manufacturer, surgical technique used at implantation, the extent of healing, the site of rupture, and the morphology of the damaged fibers. Fourteen types of ACL prostheses were analysed, each fabricated using a different combination of polymers, fibers and textile constructions. Consequently, they generated a variety of healing characteristics and mechanical responses in vivo. SEM observations revealed that abrasion of the textile fibers as a result of yarn-on-yarn and/or yarn-on-bone contact was a common phenomenon to almost all models, and was the primary cause of prosthetic failure. Healing inside the synthetic ACL was poorly organized, incomplete and unpredictable as the extent of collagenous infiltration into the textile structure did not increase with the duration of implantation. In fact, the collagenous infiltration into certain models appeared to be more detrimental than beneficial since it caused deterioration and fraying of the textile structure rather than serving as a reinforcing matrix around the prosthesis. In conclusion, the present study shows that three mechanisms may be involved in the failure of ACL prostheses: (1) inadequate fiber abrasion resistance against osseous surfaces; (2) flexural and rotational fatigue of the fibers, and (3) loss of integrity of the textile structure due to unpredictable tissue infiltration during healing.
Asunto(s)
Ligamento Cruzado Anterior , Materiales Biocompatibles , Poliésteres , Trasplantes , Adulto , Femenino , Humanos , Masculino , Microscopía Electrónica de Rastreo , Estudios RetrospectivosRESUMEN
The present study was undertaken to validate the benefits of a fluoropolymer treatment on the biostability, inflammatory response, and healing characteristics of a polyester mesh used for hernia repair, the Fluoromesh, as compared to a commercial monofilament-knit polypropylene mesh, Marlex, used as the control. Both were implanted for the repair of surgically induced abdominal hernias in piglets for prescheduled durations of implantation of 4, 15, and 60 days. The mesh and surrounding tissue were harvested at the sacrifice for the bursting strength and inflammatory response measurements in terms of alkaline and acid phosphatase secretion in the tissue, and for histological observations of the healing sequence and tissue thickness measurements by histomorphometric techniques. After cleaning to remove adherent tissue, the presence of the fluoropolymer at the surface of the mesh was detected using SEM and ESCA. The results demonstrated greater mechanical reinforcement and tissue development for the Fluoromesh than for the polypropylene mesh. The healing performance of the Fluoromesh was attributed to a more intense chronic inflammatory reaction early after implantation that stimulated significantly greater tissue ingrowth and integration. The concentration of fluoropolymer at the surface of the mesh was masked as a result of biological species adsorption. Textile analysis revealed that the Fluoromesh was dimensionally more stable in vivo than the polypropylene control mesh, which demonstrated stretching in the weft direction and shrinking in the warp direction during implantation.
Asunto(s)
Hernia Inguinal/cirugía , Mallas Quirúrgicas , Cicatrización de Heridas/fisiología , Fosfatasa Ácida/metabolismo , Fosfatasa Alcalina/metabolismo , Animales , Materiales Biocompatibles , Femenino , Polímeros de Fluorocarbono , Hernia Inguinal/patología , Inflamación , Ensayo de Materiales , Microscopía Electrónica de Rastreo , PorcinosRESUMEN
In vivo magnetic resonance imaging (MRI) and relaxometry were performed to assess noninvasively the tissue reaction and the biological integration of hydrogels made of poly[N-(2-hydroxypropyl) methacrylamide] (PHPMA) after implantation in the trapezius muscle of rabbits. The benefits of incorporating RGD peptide sequences in the polymer backbone were also investigated. The histological status of each implant was probed by the trend of their transversal relaxation times, T(2), while their biocompatibility was evaluated by analyzing the host tissue response through the evolution of the relaxation times of the adjacent muscle tissue. MR results showed the good acceptability of both hydrogels by the host tissue. The transversal relaxation curves of each implant exhibited two distinct phases as a function of implantation time: (1) a monoexponential phase, dominated by the influx of fluids inside the implants; and (2) a biexponential phase related to the infiltration of cells and the granulation tissue formation within the porous structure of each polymer. These MR findings were correlated with the results of conventional histological analyses. The present study demonstrates the effectiveness of MR methods in noninvasively monitoring the biocompatibility and histological status of implanted porous biomaterials.
Asunto(s)
Acrilamidas , Materiales Biocompatibles , Hidrogel de Polietilenoglicol-Dimetacrilato , Músculo Esquelético , Animales , Imagen por Resonancia Magnética , Contracción Muscular , ConejosRESUMEN
The paper examines the effects of water permeability on solid particle (platelet) adhesion and lipid transport through the wall of a blood conduit. Also tested is the capacity of external supports to reduce lipid infiltration into venous grafts. The results indicate that water permeability not only facilitates particle adhesion, but also affects the spatial distribution of the adhesion. The presence of filtration flow leads to a concentration polarisation of atherogenic lipids at the blood/wall interface, with increased lipid concentration from the bulk value towards the interface, thus enhancing the drive potential for lipid infiltration into the vessel wall. An external support to a venous graft guards against excessive distention and significantly reduces lipid infiltration into the venous wall. These results strongly suggest that too high a water permeability or porosity can lead to the late failure of arterial grafting by affecting blood cell interaction with the graft and lipid infiltration into the wall. Therefore the pore structure of an arterial prosthesis is crucial to its long-term biofunctionality. Ideally, a synthetic prosthesis should display pores of adequate size and a structural network that promotes tissue ingrowth, while maintaining water porosity at a physiological level.
Asunto(s)
Prótesis Vascular , Plaquetas/fisiología , Adhesión Celular/fisiología , Hemodinámica , Humanos , Lípidos/farmacocinética , Permeabilidad , Porosidad , Diseño de Prótesis , Agua/metabolismoRESUMEN
The radial transport across the wall of expanded polytetrafluoroethylene (ePTFE) arterial prostheses has a significant effect on lipid uptake observed in prostheses implanted in humans, which has been postulated to be one of the causes associated with implant failure. The goal of this study was to stimulate radial transport on a lipidic dispersion across the wall of an ePTFE prosthesis and investigate its effects on the circumferential mechanical properties of the prosthesis. An in vitro model was developed to simulate the lipidic radial transport across the wall. Lipids contained in a phosphatidylcholine dispersion were used as the transported molecules. Lipid concentration profiles were obtained after exposing commercial ePTFE prostheses to various transmural pressure and/or lipidic concentration gradients. Phospholipids gradually accumulated up to the external reinforcing wrap of the prosthesis, which clearly acted as a rigid barrier against lipid infiltration. Tensile tests performed on the virgin samples showed that the wrap was much more rigid than the microporous part of the prosthesis. After the lipid simulation, the rigidity of the wrap decreased with respect to what was observed for the virgin prosthesis. Finally, some clinical implications of this phenomena are discussed.
Asunto(s)
Materiales Biocompatibles/química , Prótesis Vascular , Lípidos/química , Politetrafluoroetileno/química , Fenómenos Químicos , Química Física , Difusión , Humanos , Ensayo de Materiales , Microespectrofotometría , Modelos Anatómicos , Fosfatidilcolinas/química , Fosfolípidos/química , Porosidad , Presión , Diseño de Prótesis , Falla de Prótesis , Reología , Espectroscopía Infrarroja por Transformada de Fourier , Estrés Mecánico , Propiedades de Superficie , Resistencia a la TracciónRESUMEN
PURPOSE: To examine the structure and healing characteristics of chronically implanted Stentor endografts that were explanted due to migration, endoleak, thrombosis, or aneurysm expansion. METHODS: The devices were harvested following reoperation (n = 5) or autopsy (n = 1) with implantation times ranging from 13 to 53 months. Structural modifications to the metal components were examined using radiography, endoscopy, and magnetic resonance imaging (MRI). Specimens taken from components of the modular stent-grafts were examined histologically and with scanning electron microscopy (SEM) to assess healing behavior. Physical and chemical stability of the nitinol wires and woven polyester graft material was evaluated using SEM and electron spectroscopy for chemical analysis. RESULTS: Although the endografts were retrieved for a variety of reasons, they exhibited similar healing and structural modifications. The woven polyester sleeve showed evidence of yarn shifting and distortion, yarn damage, and filament breakage leading to the formation of openings in the fabric. The luminal surface endografts showed incomplete healing characterized by a poorly organized, nonadherent thrombotic matrix of variable thickness. Radiographic and endoscopic observations indicated that structural failure of the grafts, particularly in the main aortic component, was related to severe compaction and dislocation of the metallic frame due to suture breaks. Corrosion marks were observed on some nitinol wires in all devices. Chemical analysis and ion bombardment of the nitinol wires revealed that the surface concentrations of titanium and nickel were not homogenous. The first layer was composed of carbon or organic elements, followed by a stratum of highly oxidized titanium with a low nickel concentration; the titanium-nickel alloy lay beneath these layers. CONCLUSIONS: Although the materials selected for construction of endovascular grafts appears judicious, the assembly of these biomaterials into various interrelated structures within the device requires further improvement.