RESUMEN
The realization of multifunctional advanced displays with better electro-optical properties is especially crucial at present. However, conventional integral full drive-based transparent display is increasingly failing to meet the demands of the day. Herein, partitioned polymerization as a novel preparation method was introduced innovatively into polymer-dispersed liquid crystals (PDLC) for realizing a step-driven display in agreement with fluorescent dye to solve the above drawback. At first, the utilization of fluorescent dye to endow the PDLC film with fluorescent properties resulted in a reduction in the saturation voltage of the PDLC from 39.7 V to 25.5 V and an increase in the contrast ratio from 58.4 to 96.6. Meanwhile, the experimental observations and theoretical considerations have elucidated that variation in microscopic pore size can significantly influence the electro-optical behavior of PDLC. Then, the step-driven PDLC film was fabricated through the exposure of different regions of the LC cell to different UV-light intensities, resulting in stepwise voltage-transmittance (V-T) responses of the PDLC film for the corresponding regions. Consequently, under appropriate driving voltages, the PDLC can realize three different states of total scattering, semi-transparent and total transparent, respectively. In addition, the PDLC film also embodied an outstanding anti-aging property and UV-shielding performance, which makes it fascinating for multifunctional advanced display applications.
RESUMEN
Using the polymerization-induced phase separation (PIPS) method, bilayer polymer-dispersed liquid crystal (PDLC) films with a PDLC-PVA-PDLC structure were prepared in this work. It was found that all PDLC performance indexes were affected by polymer mesh size after comparing the microscopic morphology and electro-optical properties of samples with different monomer ratios. Gd2O3 nanoparticles and rhodamine B base fluorescent dyes introduced into the bilayer PDLC optimized the samples' electro-optical properties and developed new functionalities. In addition, the bilayer PDLC doped with Gd2O3 and rhodamine B base held excellent progressive driving functions as well as stable durability properties. Samples doped with Gd2O3 nanoparticles and rhodamine B base also produced excellent anti-counterfeiting effects under UV irradiation at different angles, further exploiting the application potential of PDLC.
RESUMEN
Electromagnetic shielding materials are special materials that can effectively absorb and shield electromagnetic waves and protect electronic devices and electronic circuits from interference and damage by electromagnetic radiation. This paper presents the research progress of intrinsically conductive polymer materials and conductive polymer-based composites for electromagnetic shielding as well as an introduction to lightweight polymer composites with multicomponent systems. These materials have excellent electromagnetic interference shielding properties and have the advantages of electromagnetic wave absorption and higher electromagnetic shielding effectiveness compared with conventional electromagnetic shielding materials, but these materials still have their own shortcomings. Finally, the paper also discusses the future opportunities and challenges of intrinsically conductive polymers and composites containing a conductive polymer matrix for electromagnetic shielding applications.
RESUMEN
In this paper, inorganic oxide MgO nanoparticles-doped polymer dispersed liquid crystal (PDLC) films were made from a mixture of the prepolymer, SLC1717 liquid crystal, and MgO nanoparticles by the polymerization induced phase separation (PIPS) process. To observe the effect of MgO concentration, PDLC was dispersed with 0.2, 0.4, 0.6, and 0.8 wt.% MgO. Electro-optical properties of the films have been investigated using LCD parameter meter and Scanning Electron Microscope (SEM) at room temperature. It is established that MgO nanoparticles affect the microstructure of PDLC films significantly because of the formed agglomerates of MgO nanoparticles. Results show an improvement in the electro-optical properties and a decrease in the driving voltage for doped systems with MgO nanoparticles. When the doping amount of MgO is 0.8 wt.%, the threshold voltage (Vth) is reduced to about 7.5 V. Therefore, MgO-doped PDLC is expected to become an excellent choice in the field of energy-saving.
RESUMEN
To investigate the self-assembly behavior of π-conjugated ethynyl-pyrene discotic derivatives, a series of ethynyl-pyrene discotic materials were designed and synthesized by Sonogashira coupling reaction. The π-conjugated structures were characterized by 1H-NMR, IR spectroscopy, and elemental analysis. The optical properties of the discotic materials were examined by UV/Vis spectra and fluorescence emission spectra. The band gap of each compound was calculated by cyclic voltammetry with UV/Vis spectroscopy. Interestingly, the substituted groups in the four symmetrical positions did affect the self-assembly properties of as-resulted nano/micro structures. Under the same conditions, compounds 4a-4d could be self-assembled into different morphologies such as micro-tubes (for 4a), micro-wires (for 4b and 4c), and micro-grain crystals (for 4d). All of the results indicated that the discotic materials have the potential for optoelectronic applications.
RESUMEN
Some conjugated benzene ring molecules were prepared using the Sonogashira reaction, and the molecules were post-functionally modified using click chemistry. The optical and electrical band gaps were measured using UV-VIS absorption spectroscopy and the three-electrode method, and the results of both were verified against each other to prove the accuracy of the characterization. In addition, the optical performances of the material were studied by z-scan; almost all materials exhibited good nonlinear optical properties and interconversion between saturable and anti-saturable absorption due to the invocation of click reagents.
RESUMEN
In this work, two silicon nanostructures were doped into polymer/nematic liquid crystal composites to regulate the electric-optical performance. Commercial SiO2nanoparticles and synthesized thiol polyhedral oligomeric silsesquioxane (POSS-SH) were chosen as the dopants to afford the silicon nanostructures. SiO2nanoparticles were physically dispersed in the composites and the nanostructure from POSS-SH was implanted into the polymer matrix of the composites via photoinduced thiol-ene crosslinking. Scanning electron microscopy results indicated that the implantation of POSS microstructure into the polymer matrix was conducive to obtaining the uniform porous polymer microstructures in the composites while the introduction of SiO2nanoparticles led to the loose and heterogeneous polymer morphologies. The electric-optical performance test results also demonstrated that the electric-optical performance regulation effect of POSS microstructure was more obvious than that of SiO2nanoparticles. The driving voltage was reduced by almost 80% if the concentration of POSS-SH in the composite was nearly 8 wt% and the sample could be completely driven by the electric field whose voltage was lower than the safe voltage for continuous contact (24 V). This work could provide a creative approach for the regulation of electric-optical performance for polymer/nematic liquid crystal composites and the fabrication of low voltage-driven PDLC films for smart windows.
RESUMEN
The western North Pacific Subtropical High (WNPSH) is a key circulation system controlling the summer monsoon and typhoon activities over the western Pacific, but future projections of its changes remain hugely uncertain. Here we find two leading modes that account for nearly 80% intermodel spread in its future projection under a high emission scenario. They are linked to a cold-tongue-like bias in the central-eastern tropical Pacific and a warm bias beneath the marine stratocumulus, respectively. Observational constraints using sea surface temperature patterns reduce the uncertainties by 45% and indicate a robust intensification of the WNPSH due to suppressed warming in the western Pacific and enhanced land-sea thermal contrast, leading to 28% more rainfall projected in East China and 36% less rainfall in Southeast Asia than suggested by the multi-model mean. The intensification of the WNPSH implies more future monsoon rainfall and heatwaves but less typhoon landfalls over East Asia.