A systematic review and meta-analysis of the prevalence and global distribution of middle mesial canals in mandibular molars identified by CBCT.

OBJECTIVES: This systematic review and meta-analysis aimed to evaluate the prevalence of middle mesial canal (MMC) in permanent mandibular molars of different populations and regions based on cone-beam computed tomography (CBCT) studies. MATERIALS AND METHODS: PubMed, Scopus, Embase, Web of Science, and Open-Grey were searched up to October 2023 according to specific keywords. A hand search was conducted on the references of the included studies and articles from three peer-reviewed journals in endodontics. The main variable of interest was the prevalence of MMC. Additional data such as the total number of included cases, age and country of the population, CBCT device information, voxel size, and field of view details were also extracted. Extracted data were analyzed qualitatively with the JBI quality assessment checklist and quantitatively with STATA software. RESULTS: Of 32,793 studied teeth, the cumulative prevalence of MMC in both mandibular 1st and 2nd molars was 3.11% (95% CI: 2.00-4.44%). The subgroup analysis reveals a prevalence of 4.15% (95% CI: 2.69-5.89%) for mandibular 1st molars and 1.2% (95% CI: 0.2-2.83%) for mandibular 2nd molars. The highest prevalence of MMC in 1st molar was attributed to South Asia (11.24%) and Africa (6.61%). CONCLUSIONS: The prevalence of MMC varies among regions. Clinicians should be aware of the potential prevalence of MMC, particularly in mandibular first molars, as a missed MMC could result in endodontic failure. CLINICAL RELEVANCE: The presence of MMCs varies in different geographic regions (0% to 29.7%). Clinicians should always look for MMC when doing an endodontic treatment on mandibular molars, as the presence of this canal is not uncommon. We suggest searching for this canal as if searching for the second mesiobuccal canal of maxillary 1st molars.

Enhancing Coronal Adaptation of Root Canal Fillings with a Modified Single-Cone Obturation Technique: Two Case Reports.

The single-cone technique, also known as the hydraulic condensation technique, is widely employed in endodontics. However, the aforementioned method is presented with certain limitations; specifically concerning the coronal seal and the adaptation of the coronal third of a master gutta-percha (GP) with a round cross-section to the coronal dentinal walls of root canals with semi-round or oval cross-sections. Through two case reports, the current article introduces the coronal vertical condensation (CVC) technique; aiming to enhance GP adaptation to canal walls in similar scenarios. In fact, the coronal vertical condensation technique amalgamates the different aspects of warm vertical condensation and single-cone techniques. In CVC, following the placement of the master GP cone, an electrical heat carrier is inserted immediately a few millimeters apical from the canal orifice to remove the coronal portion of the master GP cone. Subsequently, a hand plugger is used to condense GP in the vertical dimension, and the coronal space is backfilled using melted GP. The implementation of CVC technique has demonstrated an improved coronal adaptation of GP with canal walls. The stated technique seems beneficial; especially in the obturation of severely curved canals or root canals with a final preparation shape of variable taper.

Comparison of Curvature Severity Between Sagittal and Coronal Planes of Mesiobuccal Canals in Permanent Maxillary First Molars Using Multiple Complexity-risk Criteria: A CBCT Cross-sectional Study of a Brazilian Subpopulation.

INTRODUCTION: This study aimed to compare the curvature severity of mesio-buccal (MB) canals between sagittal and coronal planes using cone-beam computed tomography. METHODS: In a Brazilian subpopulation, untreated MB1 (n = 141) and MB2 (n = 72) with single curvatures in sagittal and coronal planes were measured to determine their angle and radius (r), plus the prevalence of S-shaped canals was recorded. Curvature severity was defined according to the American Association of Endodontists Case Difficulty Assessment form (AAE) and EndoApp (EA), as well as their modified versions that consider angle and radii (AAE-r, EA-r). Data were converted into mean angle and r, percentage of canals >30°, AAE, EA, AAE-r and EA-r categories. The influence of r on case severity was assessed. Statistical analysis was performed using t-tests and chi-squared tests. The level of significance was set as P ≤ .05. RESULTS: For single curvatures, significantly higher mean degrees (SD) angles were found in the sagittal views in both canals (MB1 sagittal: 35 [11]; MB1 coronal: 13 [13]; MB2 sagittal: 29 [14]; MB2 coronal: 22 [15] [P < .05]). A greater percentage of angles >30° (MB1: 56.7% vs 6.4%; MB2: 44.4% vs 22.2%) in sagittal planes compared to coronal planes was also found. Conversely, a higher prevalence of S-shaped canals (MB1: 33.3% vs 7.1% MB2: 31.9% vs 15.3%) was observed in coronal planes. Significant differences between AAE and AAE-r were present with greater case severity when radii were considered (P < .05). CONCLUSIONS: Sagittal planes were associated with more severe single curvatures, while coronal planes had a greater prevalence of S-shaped canals.

Value of including loupes in prosthodontic and endodontic components of dental degrees: a systematic review.

Background It is crucial dental students graduate with sound knowledge of endodontics and prosthodontics. The use of loupes is important for these due to their intricate nature, but there is currently no standardisation of curricula.Objective This systematic review investigates the value of including loupes in completing dental degrees and their benefits to dental students.Methods Literature was searched from inception to February 2022 in PubMed, Embase and Scopus. Articles included were primary studies of dental students studying endodontics or prosthodontics, which had outcomes related to the value of utilising loupes in learning, clinical application and ergonomics.Results A total of 1,489 articles were retrieved, of which 14 relevant articles were identified. These articles discussed student perceptions and the impact on visual acuity, ergonomic practices and dental procedures. Overall, students perceived that loupes increased self-confidence and allowed a greater operative view but were initially difficult to use. Using loupes resulted in greater visual acuity than no magnification and improved ergonomic practices by reducing neck angulation and improving posture. Students also received better grades when using loupes during cavity access preparation or root canal therapy.Conclusion The use of loupes by dental students can be beneficial if there is initial teaching on their use.

Parallel endodontic education via social media: An exploratory survey study.

There is insufficient research to evaluate social media's influence on endodontic education. Therefore, this study assessed the percentage of students utilising Facebook in their education and the factors influencing their engagement. A survey was conducted on dental students, interns and dentists undertaking specialist programmes. Categorical data were analysed using Fisher's Exact test and multiple pairwise comparisons. The significance level was set at p < 0.05. Responses were received from 801 participants, with 98.4% using Facebook for endodontic knowledge. Although most students knew that scientific evidence is not always provided, they still deemed such information valuable as it was a practical demonstration of clinical cases. Most students turn to Facebook for endodontic education to compensate for the gap between their academic education and clinical practice. The utilisation of social media for education can be a concerning phenomenon and should not be ignored by academic institutes.

The effect of a preparation containing glycocholic acid on the biocidal efficacy of sodium hypochlorite in a biofilm laboratory model.

This study assessed the antimicrobial effect of sodium hypochlorite (NaOCl) mixtures combined with Keratobacter (KB) using an engineered biofilm root canal model. Clinical and reagent grade NaOCl were mixed with KB (9:1-vol/vol) to assess pH values over 1 min to select the ideal solution with a pH just below the pKa of hypochlorous acid. The samples were randomly divided into five groups: 1% and 4% NaOCl reagents, a mixture of NaOCl:KB using 1% and 4% NaOCl reagents and distilled water. Outcome measures were colony-forming units (CFUs/mL) and positive/negative cultures. No significant differences were observed in the pairwise comparisons between 1%, 4% NaOCl and 4% NaOCl+KB for the outcome CFUs/mL. Only 4% NaOCl presented with negative cultures in all samples, whereas 1% NaOCl and 4% NaOCl+KB had similar results (54% vs. 40%). The addition of KB has a limited effect on the antimicrobial efficacy of 4% NaOCl in this laboratory model.

Association between Intracanal Medicament Radiopacity and Streak Artifact Production Using Cone-beam Computed Tomography: A Laboratory Study.

INTRODUCTION: This study aimed to calculate the correlation between the radiopacity levels of various intracanal medicaments and radiolucent streak formation using cone-beam computed tomography (CBCT). METHODS: Seven commercially-available intracanal medicaments were tested, which contained different amounts of radiopacifier [Consepsis, Ca(OH)2, UltraCal XS, Calmix, Odontopaste, Odontocide, and Diapex Plus]. Their radiopacity levels were measured according to the International Organization for Standardization 13116 testing standards (mmAl). Subsequently, the medicaments were placed in 3 canals of radiopaque artificial printed maxillary molars (n = 15 roots per medicament), leaving the second mesiobuccal canal empty. CBCT imaging was carried out using an Orthophos SL 3-dimensional scanner under recommended manufacturer exposure settings. Radiopaque streak formation was assessed by a calibrated examiner using a previously published grading system (0-3). The Kruskal-Wallis and Mann-Whitney U tests with and without Bonferroni correction were used to compare radiopacity levels and radiopaque streak scores for the medicaments. Their relationship was assessed using the Pearson correlation coefficient. The level of significance was set as (α = 0.05). RESULTS: Diapex plus presented with the highest radiopacity levels (4.98 ± 0.01) and radiopaque streak scores [middle third (2.8 ± 0.18); apical third (2.73 ± 0.43)]; which was similar to UltraCal XS's radiopaque streak scores [middle third (2.8 ± 0.92); apical third (2.73 ± 0.77)]. Consepsis had the lowest radiopacity levels (0.12 ± 0.05), followed by Odontocide (0.60 ± 0.05). Consepsis and Ca(OH)2 were scored 0 for artifacts in all roots at all levels. A high positive correlation (R = 0.95) was found between radiopacity and streak formation. CONCLUSIONS: The radiopacity of intracanal medicaments varies and strongly correlates with the formation of radiolucent streak artifacts during CBCT.

Optimum Shaping Parameters of the Middle Mesial Canal in Mandibular First Molars: A Finite Element Analysis Study.

INTRODUCTION: This study investigated the effect of shaping parameters of 2 different configurations of middle mesial canals (MMCs) on the biomechanical behavior and life span of a mandibular first molar using finite element analysis (FEA). METHODS: A mandibular molar with an independent MMC and another with a confluent MMC were scanned via micro-computed tomography, and FEA models were produced. For each tooth, an intact model and 5 experimental models were produced that differed by parameters of how the MMC was shaped: unshaped MMC, 25/.04, 25/.06, 30/.04, and 30/.06. Cyclic loading of 50 N was applied on the occlusal surface in vertical and oblique scenarios, and the number of cycles until failure (NCF) was compared with the intact models. In addition, mathematical analyses evaluated the stress distribution patterns and calculated maximum von Mises and maximum principal stresses. RESULTS: For both the independent and confluent MMC models, shaping the MMC reduced the NCF. The lifelog percentage of models was inversely proportional with radicular shaping parameters during the vertical and oblique loading scenarios. The shaping size of 30/.06 resulted in lower lifelog percentage than the cases with shaping size of 25/.04 in both of the independent and confluent MMC models. For all models, oblique loading reduced NCF more than vertical loading. CONCLUSION: Shaping the MMC should be kept as conservative as 25/.04. Also, whether the MMC is independent or confluent is a deciding factor in whether to increase the apical diameter or the root canal taper when larger shaping parameters are needed.

Prevalence and morphological features of molar-root incisor malformation in children attending a specialist paediatric dental unit.

BACKGROUND: Molar-root incisor malformation (MRIM) is a rare dental anomaly featuring constricted cervical margins and tapered, narrow root and pulp morphology, often associated with severe toothache and infection. AIM: The aim of this study was to determine the prevalence of MRIM in children seen in a specialist paediatric dental unit of a tertiary referral hospital and to describe the characteristics of affected individuals. DESIGN: This study was an audit of children attending from November 2020 to November 2021. Radiographs were used to identify individuals with MRIM, and clinical data were collated. In addition, histology and microcomputed tomography (microCT) imaging were performed on teeth extracted from an affected individual. RESULTS: The prevalence of MRIM was five cases of 1054 children examined (0.47% or 1:210). The permanent first molars were affected in all five children and the primary second molars in two children; all children had medical comorbidities and multiple exposures to general anesthesia before 4 years of age. In addition, histological and microCT analyses displayed numerous microchannels connecting the pulp chamber to the external surface of the tooth at the furcation. CONCLUSIONS: Molar-root incisor malformation is an uncommon dental anomaly affecting paediatric patients with multiple comorbidities and is characterized by porosities extending from the pulp chamber to the external tooth surface, predisposing the risk of bacterial ingress from the oral cavity into the pulp chamber. Early detection may prevent atypical odontogenic facial pain and infection.

Do zirconia single-retainer resin-bonded fixed dental prostheses present a viable treatment option for the replacement of missing anterior teeth? A systematic review and meta-analysis.

STATEMENT OF PROBLEM: Zirconia has been widely used in restorative dentistry because of its favorable strength and esthetics. However, its polycrystalline structure presents a challenge for resin bonding. Significant research into surface treatments of zirconia to improve bonding has been reported, yet a universally accepted protocol remains elusive. PURPOSE: The purpose of this systematic review and meta-analysis was to evaluate the performance of anterior single-retainer zirconia resin-bonded fixed dental prostheses (RBFDPs) and review the bonding protocols used in the published data. MATERIAL AND METHODS: An electronic search of English language literature was conducted in the PubMed and Ovid (MEDLINE) databases. Following the application of inclusion and exclusion criteria, the research was evaluated to assess the quantitative data. RESULTS: Of the included studies, 1 randomized controlled trial, 3 prospective cohort studies, and 2 retrospective cohort studies reporting on anterior single-retainer zirconia RBFDPs were evaluated. Over a 3- to 10-year period, the success rate of anterior single-retainer zirconia RBFDPs was over 80%. Although there were reports of debonds, this is a minor complication as rebonding is usually possible. Furthermore, catastrophic fractures of the entire prosthesis were rare. CONCLUSIONS: Evidence for the use of single-retainer zirconia RBFDPs as a suitable treatment option for the replacement of anterior missing teeth is considerable. Based on the findings of this systematic review and meta-analysis, a 2-step process comprising micromechanical retention using airborne-particle abrasion and subsequent resin-zirconia adhesion by the application of 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP) can be recommended.

Cone-beam computed tomography-Predictors and characteristics of usage in Australia and New Zealand, a multifactorial analysis.

Cone-beam computed tomography (CBCT) is an increasingly used imaging modality. This study aimed to identify the factors that predict its usage amongst endodontists in Australia and New Zealand and describe usage characteristics. Data were collected via an online questionnaire, with analysis including descriptive statistics, cross-tabulation and multifactorial modelling. Ninety-four endodontists completed the questionnaire who were using CBCT for 7 years (median), over half had a CBCT unit in practice, with most prescribing up to 10 scans/month and 55 using a small field of view. Sixty-eight participated in >5 h of CBCT education/year and a third received a specialist-prepared report. The number of prescriptions/month was significantly associated with on-site CBCT units (Exp B: 8.53; 95% CI: 1.46-49.86, p < 0.05) and the number of years of CBCT usage by participants (Exp B: 1.46; 95% CI: 1.17-1.84, p = 0.001). CBCT imaging in endodontics is a useful diagnostic aid to decision making and treatment planning, with widespread acceptance and usage.

Remaining dentinal thickness after simulated post space preparation and the fit of prefabricated posts to root canal preparation shapes.

BACKGROUND: Post space preparation can increase the risk of experiencing perforation and root fracture. The authors assessed remaining dentin thickness after post space preparation and the fit of different prefabricated posts to root canal preparation systems in a theoretical model. METHODS: Ten datasets per type of tooth from cone-beam computed tomography were analyzed to determine the minimum root diameter from 5 through 13 mm from the apical foramen. The preparation shapes of 10 root canal preparation systems were calculated and compared with the root dimensions to determine the remaining dentin thickness. Eight post brands were compared with root dimensions to determine the areas where there was less than 1 mm dentin thickness. RESULTS: The average root canal preparation shape produced canal diameters of 0.57 mm at 5 mm from the canal terminus and 0.94 mm at 13 mm from the canal terminus. The mean post size tip diameter was 1.03 mm, which is larger than the dimensions of the average canal preparation. Post preparation would result in less than 1 mm of dentin thickness remaining in premolars, smaller roots of molars, and mandibular incisors. The area with less than 1 mm of dentin thickness was around the post tip. CONCLUSIONS: Endosequence Fiber Post (Brasseler USA), RelyX Fiber Post 3D (3M), and Rebilda (VOCO) were the better fitting posts with the root canal preparation shapes. PRACTICAL IMPLICATIONS: Many posts would result in less than 1 mm dentin thickness. Clinicians should use posts that fit their root canal preparations to minimize dentin removal.

Microbial Contamination Comparison Between Cotton Pellet and Polytetrafluoroethylene Tape Endodontic Spacers: A Systematic Review.

This systematic review compares polytetrafluoroethylene tape and cotton pellet when used as endodontic spacers underneath provisional restorations. The review followed the PRISMA guidelines and was registered in the PROSPERO database (CRD42020176555). Studies that compared the microbial contamination between polytetrafluoroethylene tape and cotton pellet, when used as spacers, were included. Literature searches of Pubmed, Embase, EBSCOHost Dentistry & Oral Sciences Source, Scopus, and Open Grey databases were conducted from their inception until May 2020 for studies in English or other Latin script languages. Hand searching of reference lists was performed. Three laboratory and three clinical studies were included. The risk of bias of the component studies varied widely. Results from the laboratory studies showed higher bacterial counts for cotton pellets. Results from the clinical studies showed that polytetrafluoroethylene tape was associated with a significantly lower incidence of microbial contamination. Findings were consistent throughout the studies, though the evidence available is scarce and heterogeneous. Polytetrafluoroethylene tape was associated with less microbial contamination when compared with cotton pellets as endodontic spacers and therefore appears to be a more suitable material for the purpose.

Comparative Evaluation of Mineral Trioxide Aggregate Obturation Using Four Different Techniques-A Laboratory Study.

This study aimed to compare the density of mineral trioxide aggregate (MTA) as a root canal filling material in the apical 5 mm of artificial root canals. Forty transparent acrylic blocks with 30-degree curved canals were instrumented and allocated into four compaction technique groups (n = 10): Lawaty (hand files); gutta-percha (GP) points; auger (nickel-titanium rotary files in reverse mode); and plugger technique. Filled canals were weighed after setting the MTA to calculate difference in mass. Two postoperative radiographs compared radiopacity by measuring luminance variations at 0.5 mm, 1 mm, 2 mm, 3 mm, 4 mm, and 5 mm from the root apex. Obturation time was measured using a digital chronometer. The significance level was set to p < 0.05. The plugger group had a lower mass. Relative luminance was significantly higher for the Lawaty group than the plugger group at all examined apical levels. The relative luminance of the auger and GP groups were significantly higher than the plugger group at depths between 0.5 mm and 2 mm. Relative luminance was highest for the Lawaty technique at all depths between 0.5 mm and 4 mm. The Lawaty technique group was associated with increased obturation time compared with pluggers. Compacting MTA in curved canals with the Lawaty technique has the highest mass and radiopacity but requires more time.

A Systematic Review Comparing Mineral Trioxide Aggregate to Other Commercially Available Direct Pulp Capping Agents in Dogs.

Vital pulp therapy (VPT) and direct pulp capping (DPC) are procedures regularly performed in dogs for the management of acute tooth fractures and as part of management for traumatic malocclusions. The purpose of this review is to apply an evidence-based medicine approach to systematically review and evaluate the scientific literature evaluating the efficacy of mineral trioxide aggregate (MTA) to other commercially available materials used for VPT in the permanent teeth of dogs. The 9 studies meeting inclusion criteria were reviewed and each studies evidence was classified using a grading system modified from the Oxford Centre for Evidence-Based Medicine. For the studies meeting inclusion criteria, MTA consistently performed as well or better than other commercially available products in terms of calcific barrier formation and biocompatibility. This review found a lack of consistency between the studies making a direct comparison of the results unreliable. Future studies would benefit from the implementation of a standard scoring system for histology, equivalent and longer study duration times and the correlation of histological and radiographic data.

Impact of Canal Taper and Access Cavity Design on the Life Span of an Endodontically Treated Mandibular Molar: A Finite Element Analysis.

INTRODUCTION: This study investigated the impact of different canal tapers and access cavity designs on the life span of endodontically treated mandibular first molars using the finite element method. METHODS: Finite element analysis was performed on simulated models with 3 access cavity designs (traditional, conservative, and truss). The mesial canals were prepared to either constant tapers of 25/.04 and 25/.06 or a variable taper corresponding to the cumulative canal preparation shapes of TruNatomy Prime (Dentsply Sirona, Charlotte, NC) and ProTaper Gold F2 (Dentsply Sirona). The distal canals in all models had a 40/.04 preparation. Using occlusal fingerprint analysis, all models were subjected to cyclic occlusal loading until model failure. The number of cycles until failure, the location of failure, stress distribution patterns, and the maximum von Mises stresses were assessed. RESULTS: The traditional access models showed a lower life span than the conservative and truss models regardless of the canal taper, whereas there was not a notable difference in the conservative and truss models. The stresses migrated apically along the root surface and remarkably on the mesial aspect of the mesial root and the furcation area's outer surface. After root canal preparation with different tapers, there were no evident changes in the pattern and magnitude of the stresses distributed along the root surface. CONCLUSIONS: The life span of the tooth is affected more significantly by the access cavity design than the root canal preparation taper. Because stress patterns migrate apically rather than concentrate in the pericervical area, crack initiation and propagation might occur anywhere on the root surface.

What is new in the 2020 International Association of Dental Traumatology emergency treatment guidelines?

Over the past eight years, there have been marked changes in the recommendations for the management of traumatic dental injuries (TDIs). The recently published International Association of Dental Traumatology (IADT) guidelines for the emergency management of TDIs provide a comprehensive manual for clinicians to refer when assessing and managing patients presenting with these types of injuries. Clinicians should be prepared to utilize these new guidelines which were released in 2020. The aim of this short communication is to support those with previous knowledge regarding the IADT guidelines, to identify the changes in treatment modality, and to provide backing for those exposed to trauma guidelines for the first time. In the present communication, the areas of TDIs have been separated into primary and permanent teeth plus avulsions, with a tabular format highlighting the main changes in the emergency management from the previous version in 2012. This format has been devised to aid the clinicians' understanding of the variations over time and facilitate recall of the new guidelines. For the first time, the 2020 IADT Guidelines present a Core Outcomes Set (COS) that includes outcomes that were relevant to all TDIs and outcomes related to only one or several TDIs. However, the COS is not the object of the present publication.

An Arithmetic Crown-down Dynamic Tactile Instrumentation Technique: A Case Report of an S-shaped Root Canal.

The preparation of severely curved S-shaped double-curved root canals can be technically challenging. A novel root canal instrumentation technique is proposed, which modifies 2 techniques: the McSpadden crown-down technique and the tactile controlled activation technique. In the McSpadden crown-down technique, the root canal is divided into 2 portions: the coronal zone and the apical zone. However, rather than focusing on the length of file engagement, a formula is proposed to calculate the maximum insertion depths of higher tapered instruments to prevent overflaring of the canal and preserve pericervical dentin. Tactile-controlled activation involves activating martensitic nickel-titanium rotary files upon engagement and then immediately withdrawing the files. The proposed technique recommends 3 apical strokes after the initial engagement before withdrawal to minimize instrumentation time. This novel technique is described in a case report involving the management of an S-shaped double-curved maxillary lateral incisor. The technique presents a new method of crown-down instrumentation that prevents overflaring and avoids instrument separation.