RESUMEN
Microplastics (MP) are ubiquitous throughout the environment as a result of an ongoing, increasing, but also lavish use, of plastics over time and its inherent persistence. In contrast, there are almost no data that allow drawing conclusions about the evolution of plastic pollution in the environment over the past decades. This study investigates the MP load in blue mussels from the North and Baltic Sea archived by the German Environmental Specimen Bank in a time series covering almost 30 years. Samples were enzymatically and chemically oxidative digested for MP extraction and subsequent analyzed mass-quantitatively for nine common polymer clusters by pyrolysis gas chromatography-mass spectrometry. Seven polymer clusters were detected in mussel tissue. Summed MP levels were at ppm levels (<20 µg/g mussel, dry weight). North Sea samples reflected a gradual increase from the 1980s/90s to the 2000s whereas those from Baltic Sea showed consistently higher, rather constant MP levels similar to the North Sea site later than 2000. Polymer composition of both sites stood out by cluster (C) of C-PVC and C-PET at both sites. Mussels from Baltic Sea site had larger C-PE and C-PP proportions. Opposed polymer- and site-specific trends indicated both regional and trans-regional MP sources for different polymer clusters. The MP composition of mussels showed strong similarities with adjacent sediment and water samples. The study introduces a relevant dataset addressing the temporal development of MP pollution. It emphasizes a high indicative potential of environmental MP composition/loads received by mussels but raises the necessity on adequate control materials accompany such kind of studies.
Asunto(s)
Mytilus edulis , Contaminantes Químicos del Agua , Animales , Monitoreo del Ambiente/métodos , Microplásticos , Océanos y Mares , Plásticos/análisis , Contaminantes Químicos del Agua/análisisRESUMEN
Microplastics (MP) have been recorded in various environments around the globe. For a better understanding of distribution patterns and for providing a basis for risk assessments, detailed data on MP concentrations and polymer compositions are required. This study investigated the effluents of two German wastewater treatment plants (WWTP) monthly over one year, in order to better understand their temporal input of MP into the receiving river systems. MP item data down to 11 µm were obtained by means of Fourier Transform Infrared (FTIR) spectroscopy under the application of an improved polymer database. Complementary mass data were obtained by pyrolysis gas chromatography-mass spectrometry (Py-GC/MS) (for one WWTP). Both FTIR and Py-GC/MS analysis revealed a homogeneous polymer composition over the year, with a general dominance of polyolefins. Elevated MP item and mass concentrations (maximum: 3 × 104 items m-3 and 3.8 × 103 µg m-3) were observed during winter months and were accompanied by either heavy rainfall (increased discharge and total organic carbon) or elevated turbidity values. These observations emphasize the need for the assessment of background parameters in future MP monitoring studies. By providing monthly data over one year on MP items and masses in WWTP effluents, this study helps enhancing the understanding of temporal MP dynamics and can act as a valuable reference point for future assessments.
Asunto(s)
Contaminantes Químicos del Agua , Purificación del Agua , Monitoreo del Ambiente/métodos , Análisis de Fourier , Cromatografía de Gases y Espectrometría de Masas , Microplásticos , Plásticos/análisis , Pirólisis , Espectroscopía Infrarroja por Transformada de Fourier , Contaminantes Químicos del Agua/análisisRESUMEN
By now, microplastics are present in every environmental compartment of which sediments are considered one major sink. As a result, several approaches for their enrichment from sediments have been established in microplastic analysis. At the same time, the smaller microplastics gained increasing attention regarding their ecotoxicological relevance. A customized sediment separator was evaluated with trace amounts of small microplastic particles (150-300 µm) of the nine most common polymers. Separation was performed with sodium bromide (ρ = 1.5 g cm-3). The experimental recovery comprises pristine as well as incubated polymers to include early biofouling effects. Polymer quantification was achieved exclusively using pyrolysis-gas chromatography-mass spectrometry. The results reflected an overall mean recovery of 65%. Interestingly, the observed behaviour seems to be density related. While polymers of higher densities revealed higher average extraction efficiencies (74-97%), those of less dense polymers are reduced and span between 34 and 65%. These observations hypothesize possible polarity related surface interactions as a relevant factor for microplastic particle extraction. In contrast, the density of the separation fluid seemed to be of subordinate relevance, if small microplastic particles were extracted in trace amounts. Early biofouling enhanced recoveries of some polar polymers, whereas the effect on apolar polymers was even negative in some cases. In a comparative synopsis with other published density separation approaches, a limited number of comparable experimental setups concerning particle size, polymer density range and polymer concentration were revealed. Nonetheless, some related experiments point to similar density/polarity driven extraction behaviour. In conclusion, the presented study suggests a re-evaluation of current separation approaches for extraction of low number/mass concentrations of small microplastics from sediments to enable a more comprehensive insight into factors that influence surface properties for microplastics extraction. Concurrently, it raises the question of how an ideal environment relevant recovery experiment can be designed.
Asunto(s)
Microplásticos , Contaminantes Químicos del Agua , Monitoreo del Ambiente , Sedimentos Geológicos , Plásticos , Contaminantes Químicos del Agua/análisisRESUMEN
Microplastics (MP) are defined as synthetic organic pollutants sized <5 mm and have been recorded in various environments worldwide. Due to their small size, they pose a potential risk for many organisms throughout the food web. However, little is known about MP distribution patterns and associated transport mechanisms. Rivers may act as pathways for MP into marine environments. In this study, we investigate the occurrence of MP in the estuary and lower stretch of the second-largest German River, the Weser, representative of a significant interface between fresh water and marine environments. The aim of the study was to enhance the general understanding by providing novel, comprehensive data and suggestions for future studies on estuarine systems. Surface water samples of two different size classes were collected by ship using an on-board filtration system (11-500 µm fraction) and net sampling (500-5000 µm fraction). After a thorough sample preparation, all samples were analysed with Focal Plane Array (FPA) Fourier Transform Infrared (FTIR) spectroscopy and Attenuated Total Reflection (ATR) FTIR spectroscopy in order to obtain information on MP concentrations, polymer composition and size distribution. Our findings show highest concentrations in the 11-500 µm fraction (2.3 × 101 - 9.7 × 103 MP m-3), with the polymer cluster acrylates/polyurethanes(PUR)/varnish being dominant. The >500 µm fraction was dominated by polyethylene. Estimated MP concentrations generally increased in the Turbidity Maximum Zone (TMZ) and decreased towards the open sea. This study contributes to the current research by providing novel insights into the MP pollution of the estuary and lower stretch of an important European river and provides implications for future MP monitoring measures.
Asunto(s)
Microplásticos , Contaminantes Químicos del Agua , Monitoreo del Ambiente , Estuarios , Mar del Norte , Plásticos , Contaminantes Químicos del Agua/análisisRESUMEN
Tire wear particles (TWP) are assumed to be the most dominant source of environmental microplastics (MP). Besides rubber components around 60% of tires are additives such as filling material and various chemicals added for vulcanization. The inevitably released TWP in daily traffic are therefore considered a threat to the ecosystem. Nevertheless, published studies on MP mass loads often exclude elastomers. Data concerning composition and concentrations of TWP compared to prominent "traditional" MP polymers, such as polyethylene, polypropylene, poly(ethylene terephthalate) and poly(vinyl chloride), are missing. Identification and quantification of TWP was implemented in an existing pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS) method for MP determination. An approach to differentiate between car and truck tire wear and to quantify their respective mass loads is presented. Complex environmental samples such as road dust, fresh water and marine sediments, blue mussels, and marine salts were partly retrospectively analyzed using Py-GC/MS. The results showed ratios of car to truck tire wear up to 16 to 1 and underline the dominance of car compared to truck tire wear mass loads in all analyzed samples. Even though some retrospective data sets might be affected by suboptimal density separation conditions (NaBr, ρ = 1.5 g/cm3), TWP concentrations in road dust clearly exceeded those of "traditional" MP (Ø 5 g TWP vs 0.3 g MP per kg road dust (dry weight). Samples included in this study, which were archived further away from TWP sources such as roads, reflected decreasing TWP concentrations (Ø 24 µg TWP vs. 107 µg MP per kg sediment (dry weight); Ø 126 µg TWP vs. 378 µg MP per kg marine salt) or were no longer present (blue mussels), while "traditional" polymers were still ubiquitously distributed.
RESUMEN
Many coral reef fish larvae spend days to months in the open ocean before settlement on coral reefs [1]. Early in development, larvae have limited swimming capabilities and will therefore be greatly affected by currents. This can potentially result in dispersal distances of tens of kilometers [2]. Nevertheless, up to 60 % of surviving larvae have been shown to return to their natal reefs [2]. To home, the larvae must develop strong swimming capabilities and appropriate orientation mechanisms. Most late-stage larval reef fish can, after being passively drifted for days to weeks, swim strongly [3], and Ostorhinchus doederleini larvae have been shown to use chemotaxis to identify their natal reef once in its vicinity [2] and a sun compass for longer distance orientation [4] during the day. But how do they orient at night? Here, we show that newly settled fish caught at One Tree Island (OTI) at the Capricorn Bunker Reef Group (Great Barrier Reef) can use geomagnetic compass information to keep a south-east heading. This behavior might help them return to their natal reef in the absence of any celestial cues at night.