RESUMEN
Resistance exercise bands are a core component of any physical activity strengthening program. Strength training can mitigate the development of sarcopenia, the loss of muscle mass or strength and function with aging. Yet, the adherence of such behavioral exercise strategies in a home-based setting are fraught with issues of monitoring and compliance. Our group developed a Bluetooth-enabled resistance exercise band capable of transmitting data to an open-source platform. In this work, we developed an application to capture this information in real-time, and conducted three usability studies in two mixed-aged groups of participants (n=6 each) and a group of older adults with obesity participating in a weight-loss intervention (n=20). The system was favorable, acceptable and provided iterative information that could assist in future deployment on ubiquitous platforms. Our formative work provides the foundation to deliver home-based monitoring interventions in a high-risk, older adult population.
RESUMEN
Magnetic Resonance-Electrical Properties Tomography (MR-EPT) is an imaging modality that maps the spatial distribution of the electrical conductivity and permittivity using standard MRI systems. The presence of a body within the scanner alters the RF field, and by mapping these alterations it is possible to recover the electrical properties. The field is time-harmonic, and can be described by the Helmholtz equation. Approximations to this equation have been previously used to estimate conductivity and permittivity in terms of first or second derivatives of RF field data. Using these same approximations, an inverse approach to solving the MR-EPT problem is presented here that leverages a forward model for describing the magnitude and phase of the field within the imaging domain, and a fitting approach for estimating the electrical properties distribution. The advantages of this approach are that 1) differentiation of the measured data is not required, thus reducing noise sensitivity, and 2) different regularization schemes can be adopted, depending on prior knowledge of the distribution of conductivity or permittivity, leading to improved image quality. To demonstrate the developed approach, both Quadratic (QR) and Total Variation (TV) regularization methods were implemented and evaluated through numerical simulation and experimentally acquired data. The proposed inverse approach to MR-EPT reconstruction correctly identifies contrasts and accurately reconstructs the geometry in both simulations and experiments. The TV regularized scheme reconstructs sharp spatial transitions, which are difficult to reconstruct with other, more traditional approaches.
Asunto(s)
Procesamiento de Imagen Asistido por Computador/métodos , Imagen por Resonancia Magnética/métodos , Algoritmos , Simulación por Computador , Conductividad Eléctrica , Fantasmas de ImagenRESUMEN
BACKGROUND: Significant electrical property differences have been demonstrated to exist between malignant and benign prostate tissues. We evaluated how well a custom designed clinically deployable electrical property sensing biopsy needle is able to discriminate between these tissue types in an ex vivo prostate model. METHODS: An electrical impedance spectroscopy (EIS) sensing biopsy (Bx) needle was developed to record resistive (ρR) and reactive (ρX) components of electrical impedance from 100 Hz to 1 MHz. Standard twelve-core biopsy protocols were followed, in which the EIS-Bx device was used to gauge electrical properties prior to extracting tissue cores through biopsy needle firing from 36 ex vivo human prostates. Histopathological assessment of the cores was statistically compared to the impedance spectrum gauged from each core. RESULTS: The magnitudes of the mean resistive and reactive components were significantly higher in cancer tissues (P < 0.05). ROC curves showed that ρR at 63.09 kHz was optimal for discriminating cancer from benign tissues; this parameter had 75.4% specificity, 76.1% sensitivity, and ROC AUC of 0.779. Similarly, 251.1 kHz was optimal when using ρX to discriminate cancer from benign tissues; this parameter had a 77.9% specificity, 71.4% sensitivity, and ROC AUC of 0.79. CONCLUSION: Significant electrical property differences noted between benign and malignant prostate tissues suggest the potential efficacy an EIS-Bx device would provide for cancer detection in a clinical setting. By sensing a greater fraction of the prostate's volume in real-time, the EIS-Bx device has the potential to improve the accuracy of cancer grading and volume estimation made with current biopsy procedures.
Asunto(s)
Biopsia con Aguja/instrumentación , Próstata/patología , Neoplasias de la Próstata/patología , Biopsia con Aguja/métodos , Composición Corporal , Espectroscopía Dieléctrica , Impedancia Eléctrica , Humanos , Masculino , Clasificación del TumorRESUMEN
Image reconstruction in soft-field tomography is based on an inverse problem formulation, where a forward model is fitted to the data. In medical applications, where the anatomy presents complex shapes, it is common to use finite element models (FEMs) to represent the volume of interest and solve a partial differential equation that models the physics of the system. Over the last decade, there has been a shifting interest from 2D modeling to 3D modeling, as the underlying physics of most problems are 3D. Although the increased computational power of modern computers allows working with much larger FEM models, the computational time required to reconstruct 3D images on a fine 3D FEM model can be significant, on the order of hours. For example, in electrical impedance tomography (EIT) applications using a dense 3D FEM mesh with half a million elements, a single reconstruction iteration takes approximately 15-20 min with optimized routines running on a modern multi-core PC. It is desirable to accelerate image reconstruction to enable researchers to more easily and rapidly explore data and reconstruction parameters. Furthermore, providing high-speed reconstructions is essential for some promising clinical application of EIT. For 3D problems, 70% of the computing time is spent building the Jacobian matrix, and 25% of the time in forward solving. In this work, we focus on accelerating the Jacobian computation by using single and multiple GPUs. First, we discuss an optimized implementation on a modern multi-core PC architecture and show how computing time is bounded by the CPU-to-memory bandwidth; this factor limits the rate at which data can be fetched by the CPU. Gains associated with the use of multiple CPU cores are minimal, since data operands cannot be fetched fast enough to saturate the processing power of even a single CPU core. GPUs have much faster memory bandwidths compared to CPUs and better parallelism. We are able to obtain acceleration factors of 20 times on a single NVIDIA S1070 GPU, and of 50 times on four GPUs, bringing the Jacobian computing time for a fine 3D mesh from 12 min to 14 s. We regard this as an important step toward gaining interactive reconstruction times in 3D imaging, particularly when coupled in the future with acceleration of the forward problem. While we demonstrate results for EIT, these results apply to any soft-field imaging modality where the Jacobian matrix is computed with the adjoint method.
Asunto(s)
Gráficos por Computador , Procesamiento de Imagen Asistido por Computador/métodos , Tomografía/métodos , Impedancia Eléctrica , Almacenamiento y Recuperación de la Información , Factores de TiempoRESUMEN
Diagnostic confirmation of cancer in solid organs is based on biopsy findings. In a standard 12-core prostate biopsy protocol, conventional biopsy needles sample only 0.95% (â¼0.228 cm³) of a typical 24-cm³ prostate gland. The primary objective of this study was to enhance the sensitivity of standard biopsy protocol by gauging electrical properties of tissue simultaneously with tissue extraction for histopathology analysis. A conventional biopsy (Bx) needle was instrumented with an electrical impedance spectroscopy (EIS) sensor to interrogate the tissue volume surrounding the needle tip. The EIS-Bx device was evaluated in a series of saline bath and ex vivo porcine experiments. It was found to sense a volume of 0.286 cm³ of tissue around the needle tip. EIS measurements were recorded from three ex vivo human prostates using the device, and the extracted biopsy cores were histologically assessed. Prostate conductivity σ ranged from 0.179 to 0.3310 S/m for benign tissues and 0.0746 to 0.0837 S/m for malignant tissues at frequencies ranging from 1 to 100 kHz. Relative permittivity ϵ(r) ranged from 2.10×106 to 2.9 × 104 for benign and 6.63×105 to 5.3 × 10³ for cancer tissues over the same frequency range. Both are found to be significantly higher in normal prostate tissues than in malignant tissue (p < 0.00001).
Asunto(s)
Biopsia con Aguja/instrumentación , Biopsia con Aguja/métodos , Tejido Adiposo/química , Tejido Adiposo/patología , Animales , Conductividad Eléctrica , Impedancia Eléctrica , Diseño de Equipo , Humanos , Masculino , Próstata/química , Próstata/patología , Neoplasias de la Próstata/química , Neoplasias de la Próstata/patología , Relación Señal-Ruido , PorcinosRESUMEN
Current prostate biopsy procedures entail sampling tissues at template-based locations that are not patient specific. Ultrasound (US)-coupled transrectal electrical impedance tomography (TREIT), featuring an endorectal US probe retrofitted with electrodes, has been developed for prostate imaging. This multi-modal imaging system aims to identify suspicious tumor regions based on their electrical properties and ultimately provide additional patient-specific locations where to take biopsy samples. Unfortunately, the open-domain geometry associated with TREIT results in a severely ill-posed problem due to the small number of measurements and unbounded imaging domain. Furthermore, reconstructing contrasts within the prostate volume is challenging because the conductivity differences between the prostate and surrounding tissues are much larger than the conductivity differences between benign and malignant tissues within the prostate. To help overcome these problems, anatomically accurate hard priors can be employed to limit estimation of the electrical property distribution to within the prostate volume; however, this requires the availability of structural information. Here, a method that extracts the prostate surface from US images and incorporates this surface into the image reconstruction algorithm has been developed to enable estimation of electrical parameters within the prostate volume. In this paper, the performance of this algorithm is evaluated against a more traditional EIT algorithm that does not use anatomically accurate structural information, in the context of numerical simulations and phantom experiments. The developed anatomically accurate hard-prior algorithm demonstrably identifies contrasts within the prostate volume while an algorithm that does not rely on anatomically accurate structural information is unable to localize these contrasts. While inclusions are identified in the correct locations, they are found to be smaller in size than the actual object due to the rapid decay in sensitivity at increasing distances from the probe surface. Despite this, identifying the size of the inclusion accurately may not be essential for biopsy guidance in a clinical setting; instead, knowledge of the general vicinity of a cancerous lesion may be sufficient for suggesting and guiding clinicians to extract additional biopsy cores.
Asunto(s)
Procesamiento de Imagen Asistido por Computador/métodos , Próstata/anatomía & histología , Recto , Tomografía/métodos , Algoritmos , Impedancia Eléctrica , Humanos , Masculino , Tamaño de los Órganos , Neoplasias de la Próstata/diagnósticoRESUMEN
Electrical impedance was recorded at 21 discrete frequencies (1 to 100 kHz) from 27 ex vivo human prostates. These electrical properties were measured by using custom designed Electrical Impedance Spectroscopy (EIS) sensing biopsy (Bx) needles. EIS-Bx needles gauge the electrical properties of tissue in tandem with the tissue extraction (used for histopathological assessment). The EIS-Bx probe has a signal-to-noise ratio (SNR) of 65 dB across the frequency range (1 kHz to 100 kHz). A total of 36 cancers and 288 benign regions were sampled from 27 human prostates. Mean resistance (R) of prostate decreased from 537.27 Ω to 126.74 Ω for benign tissues and 999.52 Ω to 340.67 Ω for malignant tissues across the 1 kHz - 100 kHz spectral range. Likewise, mean reactance (X) ranged from -391.41 Ω to -62.6 Ω for benign and -675.09 Ω to -162.28 Ω for cancer tissues over the same frequency range. Both R and X values are found to be significantly lower in normal prostate tissues than in malignant tissue (p<0.001). Further testing to evaluate the clinical efficacy of this coupled device is underway.
Asunto(s)
Espectroscopía Dieléctrica/métodos , Neoplasias de la Próstata/diagnóstico , Biopsia con Aguja , Humanos , Masculino , Neoplasias de la Próstata/patologíaRESUMEN
X-ray mammography is the standard for breast cancer screening. The development of alternative imaging modalities is desirable because mammograms expose patients to ionizing radiation. Electrical impedance tomography (EIT) may be used to determine tissue conductivity, a property which is an indicator of cancer presence. EIT is also a low-cost imaging solution and does not involve ionizing radiation. In breast EIT, impedance measurements are made using electrodes placed on the surface of the patient's breast. The complex conductivity of the volume of the breast is estimated by a reconstruction algorithm. EIT reconstruction is a severely ill-posed inverse problem. As a result, noisy instrumentation and incorrect modelling of the electrodes and domain shape produce significant image artefacts. In this paper, we propose a method that has the potential to reduce these errors by accurately modelling the patient breast shape. A 3D hand-held optical scanner is used to acquire the breast geometry and electrode positions. We develop methods for processing the data from the scanner and producing volume meshes accurately matching the breast surface and electrode locations, which can be used for image reconstruction. We demonstrate this method for a plaster breast phantom and a human subject. Using this approach will allow patient-specific finite-element meshes to be generated which has the potential to improve the clinical value of EIT for breast cancer diagnosis.
Asunto(s)
Mama/anatomía & histología , Conductividad Eléctrica , Análisis de Elementos Finitos , Fenómenos Ópticos , Tomografía , Algoritmos , Mama/patología , Neoplasias de la Mama/patología , Impedancia Eléctrica , Electrodos , Humanos , Fantasmas de ImagenRESUMEN
Assessing peripheral vasculature health has the potential to impact clinical decision making in terms of treating patients with cardiovascular disease. The electrical conductivity of certain tissue regions within the forearm change as blood vessels undergo pulsatile dilation in synchrony with the beating of the heart. We use dynamic electrical impedance tomography (EIT) gated to the peak of a pulse oxymetry plethysmography waveform to image this temporally varying spatial conductivity. A phantom imaging experiment is presented showing that small conductivity changes of less than 1 mm are detectable using the developed dynamic EIT system. This system is used to image a volunteer's forearm during resting cardiovascular activity. Similar structures are observed in the plethysmography trace and the temporally varying conductivity. Spectral analysis shows that the maximum amplitude is occurring at frequencies of 1.19 Hz and 1.21 Hz for the plethysmography trace and conductivity trace, respectively. This preliminary data suggests that EIT may be sensitive enough to visualize cardiac-based pulsatility in the peripheral vessels of the forearm.
Asunto(s)
Algoritmos , Velocidad del Flujo Sanguíneo/fisiología , Antebrazo/fisiología , Oximetría/instrumentación , Pletismografía de Impedancia/instrumentación , Tomografía/instrumentación , Diseño de Equipo , Análisis de Falla de Equipo , Antebrazo/irrigación sanguínea , Humanos , Pletismografía de Impedancia/métodos , Reproducibilidad de los Resultados , Sensibilidad y EspecificidadRESUMEN
Accurate equilibrium structures have been determined for (Z)-pent-2-en-4-ynenitrile (8) and maleonitrile (9) by combining microwave spectroscopy data and ab initio quantum chemistry calculations. The microwave spectra of 10 isotopomers of 8 and 5 isotopomers of 9 were obtained using a pulsed nozzle Fourier transform microwave spectrometer. The ground-state rotational constants were adjusted for vibration-rotation interaction effects calculated from force fields obtained from ab initio calculations. The resultant equilibrium rotational constants were used to determine structures that are in very good agreement with those obtained from high-level ab initio calculations (CCSD(T)/cc-pVTZ). The geometric parameters in 8 and 9 are very similar; they also do not differ significantly from the all-carbon analogue, (Z)-hex-3-ene-1,5-diyne (7), the parent molecule for the Bergman cyclization. A small deviation from linearity about the alkyne and cyano linkages is observed for 7-9 and several related species where accurate equilibrium parameters are available. The data on 7-9 should be of interest to radioastronomy and may provide insights on the formation and interstellar chemistry of unsaturated species such as the cyanopolyynes.
RESUMEN
OBJECTIVE: Perceived intolerance to infant formula is a frequently reported reason for formula switching. Formula intolerance may be related to perceived symptoms of constipation, fussiness, abdominal cramps, and excessive spit-up or vomit. Commercially available formulas differ from each other in processing and in sources and levels of protein, lipids, and micronutrients. These differences may affect tolerance. The objective of this article was to compare the tolerance of two commercially available powder infant formulas that differ in composition. Measures of tolerance in exclusively breastfed infants weaned to an infant formula and exclusively formula-fed infants were evaluated. METHODS: Two clinical studies were conducted. In study 1, 82 healthy, full-term infants who were exclusively breastfed at the time of enrollment were randomized at weaning to formula A (commercially available Similac With Iron Powder) or formula B (previously available Enfamil With Iron Powder). Parents completed daily records of tolerance during exclusive breast milk feeding, during the weaning period, and for a 2-week exclusive formula-feeding period. In study 2, 87 healthy, full-term infants who were exclusively formula-fed at the time of study enrollment (by 2 weeks of age) were fed a standard cow milk-based formula (previously commercially available Similac With Iron Powder) and then randomized to receive formula A or B for a 2-week period. Parents completed daily records of tolerance throughout the study. Formula A was a cow milk-based formula with a whey:casein ratio of 48:52 and a fat blend of 42% high-oleic safflower, 30% coconut, and 28% soy oils. Formula B was a cow milk-based formula with a whey:casein ratio of 60:40 and a fat blend of 45% palm olein, 20% soy, 20% coconut, and 15% high-oleic sunflower oils. Both formulas had lactose as the source of carbohydrate and contained 12 mg of iron per liter. Only formula A contained nucleotides at the time of the study. Measures of tolerance included volume of each formula feeding, occurrences of spit-up and/or vomit, and the color (yellow, green, brown, or black) and consistency (water, loose/mushy, soft, formed, or hard) of each stool. RESULTS: In both studies, volume of formula intake, weight gain, and incidence of spit-up or vomit did not differ between feeding groups. In study 1, stool frequency decreased significantly from the exclusive breast milk period to weaning. Stools also became firmer as infants moved from breast milk to weaning and to exclusive formula feeding. When formula was introduced into the diet, stools became less yellow and more green. Infants weaned to formula B had less frequent stools, fewer brown stools, and more yellow stools than did infants fed formula A. In both studies, infants fed formula B experienced significantly firmer stools than did those fed formula A. CONCLUSIONS: The present clinical studies indicate that the composition and/or processing of milk-based powder iron-fortified infant formulas affect stool characteristics experienced by infants. The inclusion of palm olein oil in formula B may be the reason for the observed differences in stool characteristics. Palm olein is used in infant formulas to provide palmitic acid at a level similar to that found in breast milk. However, palmitic acid from palm olein is arranged differently from that in breast milk triglyceride and is poorly absorbed. Unabsorbed palmitic acid tends to react with calcium to form insoluble soaps, and the level of these soaps is correlated with stool hardness. The pattern of softer stools and greater frequency of stooling associated with formula A is similar to the stool pattern in the exclusively breastfed infant. Thus, the use of formula A may ease the transition from breast milk to formula feeding and ameliorate parents' perception that constipation is associated with iron-fortified formula.