The effect of recombinant human bone morphogenetic protein-2 on femoral reconstruction with an intercalary allograft in a dog model.

This study compared the effect of augmentation of allograft host bone junctions with recombinant human bone morphogenetic protein-2 (rhBMP-2) on an absorbable collagen sponge (ACS), autogenous cancellous bone graft (CBG), and a collagen sponge alone in a canine intercalary femoral defect model repaired with a frozen allograft. Outcome assessment included serial radiographs, dual energy X-ray absorptiometry scans, and gait analyses, and mechanical testing and histology of post-mortem specimens. The distal junction healed more quickly and completely with rhBMP-2 than ACS alone based on qualitative radiography and histologic evaluations. The primary tissue in the unhealed gaps in the ACS group was fibrous connective tissue. The proximal allograft host bone junction had complete bone union in the three treatment groups. There was significantly greater new bone callus formation at both junctions with rhBMP-2 than with CBG or ACS alone that resulted in increased bone density around the allograft host bone junctions. All dogs shifted their weight from the treated leg to the contralateral pelvic limb immediately after surgery. Weight bearing forces were redistributed equally between the pelvic limbs at 12 weeks after surgery with rhBMP-2, at 16 weeks after surgery with CBG, and at 24 weeks after surgery with ACS alone. Bending and compressive stiffnesses of the whole treated femora were equal to the contralateral control femora in all treatment groups, whereas torsional rigidities of the whole treated femora for the CBG and ACS groups were significantly less than the control. Both the proximal and distal junctions the treated with rhBMP-2 had torsional stiffnesses and strengths equal to intact control bones. Ultimate failure torques of the proximal junctions of the CBG group and of both junctions of the ACS group were significantly less than the BMP-treated bones. Augmentation of the allograft host bone junctions with rhBMP-2 on an ACS gave results for all parameters measured that equaled or exceeded autogenous graft in this canine intercalary femoral defect model.

Histomorphometric description of allograft bone remodeling and union in a canine segmental femoral defect model: a comparison of rhBMP-2, cancellous bone graft, and absorbable collagen sponge.

The purpose of this study was to determine the effect of recombinant human bone morphogenetic protein type 2 (rhBMP-2) on the histomorphometry of femoral allograft-host bone union and allograft remodeling. A 6 cm mid-diaphyseal femoral defect was created and filled with an allograft stabilized with an interlocking nail in 21 dogs. Dogs were randomly divided into three equal groups and the allograft-host bone junctions and the mid-diaphyses of the allografts were treated with either an absorbable collagen sponge (ACS) loaded with rhBMP-2 (BMP group), an autogenous cancellous bone graft (CBG group), or ACS loaded with buffer solution (ACS group). All dogs received daily tetracycline until sacrifice at 24 weeks to label new bone formation. Histomorphometric analyses on sections of proximal and distal allograft-host bone junctions and the mid-diaphyseal portion of allografts were performed using fluorescent and regular light microscopy. Analyses of the host bone and junctions between allograft and host bone revealed significantly greater new bone formation and larger osteon radii in the BMP group compared to CBG and ACS groups and contralateral intact bone. Porosity in CBG and ACS groups was significantly higher than in the BMP group, which had similar values to intact bone. In transverse sections of allografts, the largest pore diameters were present in the CBG group. Based on all parameters measured, significantly higher bone turnover occurred in the outer cortical area of the allograft in all groups as compared to the inner cortical and mid-cortical areas. New bone formation and osteon radius/osteon width in allografts were similar for all three groups. Higher porosity and larger pore diameters in the CBG and ACS groups suggested higher bone resorption versus formation in these groups compared to the BMP group. The results of this study reveal more balanced allograft bone resorption and bone formation in the BMP group, with greater resorptive activity in the CBG and ACS groups. However, neither rhBMP-2 nor autogenous bone graft increased allograft incorporation when compared to the negative control (ACS group).

Comparison of three methods of gluteal muscle attachment to an allograft/endoprosthetic composite in a canine model.

This study used radiography, gait analysis, gluteal muscle mass, mechanical testing, and qualitative histology to compare three methods of gluteal muscle attachment to an allograft/endoprosthetic composite of the proximal 25% of the femur in an in vivo canine model. The three methods of gluteal muscle attachment were identical to those used clinically in human patients for hip revision and proximal femoral limb salvage: the host gluteal tendon sutured to the allograft tendon (tendon group), the host greater trochanter with intact gluteal tendons secured to the allograft with a cable-grip system (grip group), and periosteally vascularized proximal femoral bone onlay with intact tendons wrapped around the allograft (wrap group). On the basis of radiographs taken every 2 months, the tendon group had more graft fractures than did the grip or wrap group. Radiographic union of the graft-host bone junction occurred more rapidly and there was less graft resorption in the wrap group than in the other two groups. In all dogs, peak vertical ground-reaction forces in the treated limb decreased immediately after surgery and then slowly increased over the length of the study. The dogs in the wrap group regained normal weight-bearing on the treated limb more quickly than did those in the other groups. The constructs in the tendon group were weaker and less stiff immediately after surgery than were those in the other groups or in intact controls. Histologic analysis confirmed that the wrap technique resulted in complete union of the host bone-allograft junction more often than did the other techniques. The wrap method had the best functional outcome after 9 months when an allograft/endoprosthetic composite was used during total hip arthroplasty in this canine model.

Avulsion fracture of the great toe: a case report.

A case involving an isolated bony avulsion fracture of the extensor insertion on the distal phalanx of the great toe is described. The fracture was displaced 2 mm with 30 degrees dorsal angulation; the joint was congruent and not subluxed. The patient was treated nonsurgically with a rigid-soled sandal. Bony healing at the fracture site was clearly evident at 16 weeks postinjury. The patient began using a normal shoe at 10 weeks and resumed his running activities without pain at 16 weeks. The nonsurgical treatment of this injury, similar to that of a mallet finger, was successful.

Stability of proximal femoral grafts in canine hip arthroplasty.

In a canine model, the fixation stability of a prosthesis and proximal bone graft composite were measured relative to the distal femur. One group had the prosthesis graft composite cemented into the distal femur. The second group had the prosthesis graft composite press fit into the distal femur for biologic ingrowth. Displacements of the proximal femoral grafts relative to the host bone in each group were measured after ex vivo (acute with graft) implantation and 4 months after implantation. A third group with no osteotomy (acute intact) simulated perfect graft to host bone union. Relative displacements representing 6 degrees freedom (translation and rotation) were calculated from the displacement values measured by 9 eddy current transducers. Measurements of displacement were used to test the hypothesis that distal press fit fixation equals distal cement fixation at 4 months after implantation. In all cases the measured translations and rotations of the graft to implant construct were small and of a magnitude that should encourage bone ingrowth (< 0.05 mm and < 0.1 degree, respectively). The stability of the press fit group at 4 months was not significantly different from the cemented group in axial and transverse displacement during axial and transverse loading, respectively. There was no difference in stabilities at 4 months between distal press fit and cemented fixation in hip replacements requiring a proximal femoral graft.

Measurement of bone mineral density by dual-energy x-ray absorptiometry in patients with the Wisconsin hip, an uncemented femoral stem.

Although qualitative evidence of femoral bone remodeling, secondary to total hip arthroplasty (THA), is apparent on radiographs, quantification of change in bone mass from radiographs is limited. Dual-energy x-ray absorptiometry overcomes many of the limitations and yields accurate and precise bone mineral density (BMD) data. In this study, regional changes in femoral BMD were examined in 89 THA patients with a 2-year follow-up period. Thirty-two patients were evaluated initially before surgery and followed through the first 2 postoperative years. A second group was comprised of 57 patients whose surgery had been performed 1 to 6 years prior to entry into the study; they were also followed for 2 years hence. Thus, both immediate and later bone responses were evaluated prospectively. Maximal bone remodeling was seen in the first 6 months after THA and with a near plateau by the end of the first year. A slow yearly decline in BMD appeared to occur as long as 8 years after THA, thus demonstrating the long-term effects of the introduction of a femoral stem. Variance in preoperative BMD was explained by disease only; no other factors (age, weight, sex) showed significant associations, and body weight was the only variable that affected rate of remodeling after THA (not age, weight, sex, prosthesis size, nor disease). All patients were healthy, relatively young individuals who were good candidates for uncemented implantation, and none showed evidence of clinical complications or surgical failure. It is therefore suggested that the patterns and results reported here be viewed as normative data, that is, the typical skeletal adaptation to THA. In future application, observation of disparate BMD results as compared with these "normal" data may be predictive of abnormal response to surgery and potential for later problems.

Osteoma of the innominate bone with intraosseous and parosteal involvement.

A case has been presented of a 47-year-old woman with a dense bony mass both within and on the surface of her right public ramus. This was discovered incidentally on plain radiographs of the pelvis. Besides osteoma, a differential diagnosis of parosteal osteosarcoma, ossifying parosteal lipoma, periostitis ossificans, osteochondroma with attenuated cartilage cap, and melorheostosis was considered. Histological evaluation of open biopsy samples showed typical findings of an osteoma. This is an unusual case of an osteoma with both parosteal and intraosseous involvement.

Alterations in femoral strain, micromotion, cortical geometry, cortical porosity, and bony ingrowth in uncemented collared and collarless prostheses in the dog.

The effects of a collared femoral endoprosthesis in uncemented total hip arthroplasty were evaluated in 12 dogs. This experimental study compared the biomechanic and histologic responses between collared and collarless femoral prostheses 4 months after implantation. Implant stability (micromotion) and cortical surface strain were evaluated immediately and 4 months after implantation in a simulated postoperative condition, whereas bone ingrowth, cortical porosity, and cortical remodeling were assessed after 4 months only. There were no significant differences in implant stability or cortical surface strains when the collared and collarless groups were compared acutely or after 4 months (P > .05). There were also no significant differences in percent fill, bony ingrowth, or cortical geometry after 4 months (P > .05). There was a significant increase in cortical porosity measured from the proximal femur after 4 months for both the collared (P = .0002) and collarless groups (P = .009) and when both groups were compared (collarless, 8.2% and collared, 5.8%; P = .03). The results suggest that a collar may be beneficial in decreasing the cortical remodeling that occurs in the proximal femoral cortex after implantation of an uncemented total hip arthroplasty.

Musculoskeletal neoplasms: preoperative evaluation with MR angiography.

PURPOSE: To assess the ability of magnetic resonance (MR) angiography to depict vascularity of musculoskeletal neoplasms. MATERIALS AND METHODS: Two-dimensional (2D) time-of-flight (TOF) MR angiography was compared with conventional arteriography during staging of musculoskeletal tumors in 23 prospective examinations. Phase-contrast (PC) MR angiography was also performed in 19 cases and evaluated as a possible supplement to 2D TOF imaging. RESULTS: Of named vessels, 92% in proximity to tumor were noted by blinded readers. The PC technique provided supplemental data in 47% of cases, usually related to better delineation of in-plane feeder vessels and areas with pulsatile blood flow. Of the 28 branch feeder vessels, 23 were noted on both conventional arteriograms and MR angiograms in a nonblinded review, but 16 were difficult to distinguish as feeders because of lack of associated tumor blush. CONCLUSION: MR angiography has promise to replace conventional arteriography for orthopedic preoperative planning.

Ingrowth reduces implant-to-bone relative displacements in canine acetabular prostheses.

We examined bone-to-implant relative displacement of acetabular prostheses acutely and after ingrowth in a canine model. Uncemented hemispherical acetabular cups with titanium mesh pads comprising approximately 26% of the surface of the cup were inserted in eight adult canine hemipelves ex vivo. The acetabular prostheses were fixed with 13 mm titanium screws. Zero, one, and two-screw configurations were tested, with the order of testing randomly assigned. A load simulating 1,000 cycles of canine gait as applied to the acetabular component, and relative displacements were measured at three locations between implant and bone to determine acute fixation. A repeated measures analysis of variance showed that two screws produced only 42% of the average relative displacement of one screw and 14% that of zero screws. Eight adult mixed-breed dogs then underwent unilateral total hip arthroplasty. All acetabula were biologically fixed with two cancellous screws. The results at 4 months showed significantly less relative displacement between the implant and bone than was measured in ex vivo implantations (p = 0.014). Bone ingrowth filled 20 +/- 6% (mean +/- SD) of the available space. The relative displacements of these implants were small in all cases (12 +/- 13 microns) and did not correlate with the amount of bone ingrowth. These data suggest that acetabular fixation with two screws can lead to bone ingrowth and reduced relative motion of the prosthesis under functional loading.

A biomechanical analysis of prophylactic fixation for pathological fractures of the distal third of the humerus.

Twenty-four matched pairs of fresh-frozen humeri from human cadavera were divided randomly into four groups, in order to determine the most biomechanically desirable construct for the prophylactic fixation of impending fractures of the distal third of the humerus. Group I comprised intact humeri and matched humeri in which a 50 per cent lateral, semicylindrical cortical defect of the distal third had been created, resulting in a reproducible model of an impending fracture due to a lytic defect involving 50 per cent cortical disruption at the distal end of the humeral medullary canal. In Group II, such a lateral defect was created in both the right and the left, matched humeri. Group III was composed of humeri in which the defect had been fixed prophylactically with a single plate and the contralateral humeri, which had been treated with double-plating. Group IV comprised specimens in which the defect had been fixed with double-plating as well as those fixed with Rush rods. The fixation of each specimen in Groups III and IV was supplemented with bone cement. Each specimen was tested in torsion to failure, and the resulting peak torque, torsional stiffness, and total energy absorbed were analyzed for each group. The Group-I specimens that had a defect had a significantly lower (p < 0.05) peak torque, torsional stiffness, and total energy absorbed than the intact specimens; all of the specimens with a defect failed at the defect, and all of the intact specimens failed proximally. In Group II, there was a high side-to-side association with respect to peak torque, torsional stiffness, and total energy absorbed.(ABSTRACT TRUNCATED AT 250 WORDS)

Hip replacement with a threaded acetabular cup. A follow-up study.

A study was begun in 1983 to determine the efficacy of a threaded acetabular cup. Fifty-five patients who had a total of sixty-eight threaded titanium cups had a complete clinical and radiographic evaluation yearly. Fifty-two of the arthroplasties had been primary and sixteen, revisions. The average duration of follow-up was six years (range, five to nine years). Seventeen cups had to be revised at an average of sixty-two months (range, twenty-seven to 108 months) after the index operation. Nine additional cups were loose and revision was pending at the most recent follow-up examination. Failure was defined as revision or pending revision. Thus, twenty-six (38 per cent) of the sixty-eight cups failed. Sixteen (31 per cent) of the fifty-two primary arthroplasties failed and ten of the sixteen revision arthroplasties failed. Radiographic changes that were evident in patients who had a failed cup consisted of superomedial migration of the cup with osteolysis in Zone 3, as classified by DeLee and Charnley. These radiographic changes preceded symptoms in most patients. Because of the high rate of failure of this acetabular component at six years, we believe that its use is not warranted.

Ultrasonically determined elasticity and cortical density in canine femora after hip arthroplasty.

Effects of canine hip replacement (with a porous-coated femoral component) on the material properties of surrounding cortical bone were evaluated. The hypotheses were: (1) after four months of implantation, mechanical properties of the cortex would change, and (2) a collared implant would be associated with smaller changes than a collarless design. Unilateral total hip arthroplasty was performed in 15 mixed-breed dogs. Nine received a collared and six received a collarless femoral component. Four months after implantation, longitudinal ultrasonic wave propagation velocities and bone mineral densities (from dual energy X-ray absorptiometry) were measured in harvested femora and used to calculate the axial elastic constitutive coefficients for the cortex surrounding the implants. Results showed no difference in bone elasticity or bone density between collared and collarless designs. Significant velocity decreases from control values (p < 0.0001) were noted in all implanted femora at four months. Bone mineral densities also displayed decreased values after four months of implantation (p < 0.0145). Elastic coefficients were consistently less after four months of implantation when compared to control values (p < 0.0001). This alteration in material properties would affect load transfer into the implanted femur via the increased disparity between implant and bone stiffnesses regardless of the component design. Significant differences in the elastic coefficients between implanted and control femora support hypothesis 1. However, no group differences were found between collared and collarless implantations; thus, the study does not support hypothesis 2.

Case report 803: Gorham's disease (Gorham-Stout syndrome) of scapula.

In summary, a 36-year-old man presented with pain and limited motion in the shoulder. Clinical examination revealed obliteration of normal scapular landmarks in the conspicuous absence of any palpable soft tissue mass. Roentgenograms showed progressive osteolysis of the scapula. Biopsy confirmed the diagnosis of Gorham's disease. MRI played a key role in defining the extent of disease involvement and in displaying the distinct soft tissue anatomy. These MRI features are to our knowledge previously undescribed.

Preoperative evaluation of giant cell tumors of the radius with magnetic resonance angiography.

We report three clinical cases of giant cell tumor of the distal radius in which reconstructions were performed with vascularized fibular grafts. Magnetic resonance angiography, a newer and noninvasive technique, was used in addition to preoperative magnetic resonance imaging. All patients had routine digital subtraction arteriography, with which magnetic resonance angiography compared favorably, demonstrating the carpal arch anatomy and other major vessels at the tumor site. In two patients the trifurcation vessels of both legs were also studied with magnetic resonance angiography before fibular harvest. In one case, the fibula graft was successfully harvested on the basis of the magnetic resonance angiographic findings. In the other case, digital subtraction arteriography had been done to evaluate suspected peripheral vascular disease. In that case magnetic resonance angiography correlated well with the digital subtraction arteriographic study, showing bilateral anterior tibial artery occlusions and patent posterior tibial and peroneal arteries. Magnetic resonance angiography has the potential to replace conventional angiography in preoperative evaluation of upper-extremity tumors.

Rapidly progressive protrusio acetabuli in patients with rheumatoid arthritis.

Current literature suggests protrusio acetabuli in patients with rheumatoid arthritis progresses at a gradual rate of 2-3 mm per year. This report presents five patients with rheumatoid arthritis (RA) who experienced rapidly progressive protrusio. The period of rapid clinical progression averaged 40 days. During progression, medial protrusio increased an average of 7.5 mm, superior protrusio advanced 6.9 mm, femoral head width decreased 2.7 mm and center-edge angle increased 20.7 degrees. Axial protrusio occurred along an axis 137 degrees from vertical. A key clinical feature was an absence of significant hip symptoms before a marked increase in symptoms over a period of days to several weeks, resulting in a significant decrease in the patient's ambulatory capacity. Osteopenia was a consistent preexisting radiographic feature. The findings underscore the existence of rapidly progressive protrusio in the natural history of RA and its importance in the differential diagnosis of hip pain in patients with RA. Early recognition is important to minimize the potential complications of delayed surgical treatment.

Combined MRI and MRA for limb salvage planning.

Magnetic resonance angiography (MRA) was performed in two patients with primary bone neoplasms being staged for differing types of limb-salvage procedures. A gated two-dimensional (2D) phase contrast MRA sequence that is capable of variable velocity encoding throughout the cardiac cycle was used to acquire the MRA images. The resulting cardiac phase images were added with a matched filter algorithm to create a single high signal-to-noise ratio image. An SE MR image in the same plane and field of view was then added to the MRA image. This displayed the relationship of vascular and stationary tissues within a composite picture: a "2D combined angiographic-stationary tissue" image. The anatomy represented gave information equivalent to conventional angiography. While this technique is not an ideal 3D rendering, it is easier to use. Along with other SE sequences acquired as needed for staging, it provides a complete preoperative evaluation of a tumor bed or donor site for a vascularized graft harvest.

Determination of bone mineral density by dual x-ray absorptiometry in patients with uncemented total hip arthroplasty.

Bone remodeling is an expected sequela with total hip arthroplasty (THA). Although there are several methods of estimating bone response in THA patients from radiographs, there are no accurate and generally accepted methods for quantitative determinations in vivo. In this study, we describe an application of dual x-ray absorptiometry (DXA) for measuring bone mineral content and bone mineral density in the proximal femur following THA. DXA is a noninvasive technique with minimal radiation exposure (< 5 mrem). Various aspects of measurement error (accuracy and reliability) of this application of DXA were determined in a series of studies reported here. Accuracy error (how similar are the measured and actual values) was < 1% determined in bone phantoms of four densities. Precision error (how reproducible are the measurements) was also < 1% at all four densities in the phantoms and was only slightly elevated (0.9-1.5%) in repeated measurements of implanted cadaver femora. Precision error in vivo, determined both from multiple replicates on five patients and from duplicate scans on 30 patients, was further elevated but remained < 5%. Contributions to precision error, rotation of the leg, and interoperator variability were assessed; none was found to elevate precision error appreciably. We suggest that DXA is a feasible method for quantifying bone response following THA, and will allow discrimination of small changes (> 5%) not previously measurable.