3D Printing characteristics and mechanical properties of a bio scaffold obtained from a Micro-CT Scan, using the fused deposition modeling technique

The objective is to determine which biopolymer has the best 3D printing characteristics and mechanical properties for the manufacture of a bioscaffold, using the fused deposition printing technique, with models generated from an STL file obtained from a Micro-CT scan taken from a bovine iliac crest bone structure. Through an experimental exploratory study, three study groups of the analyzed biopolymers were carried out with thirteen printed structures of each one. The first is made of 100% PLA. The second, 90B, we added 1g of diatom extract, and the third, 88C, differs from the previous one in that it also contains 1g of calcium phosphate. The 39 printed structures underwent a visual inspection test, which required the fabrication of a gold standard scaffold in resin, with greater detail and similarity to the scanned bone structure. Finally, the structures were subjected to a compressive force (N) to obtain the modulus of elasticity (MPa) and compressive strength (MPa) of each one of them. A statistically significant difference (p=0.001) was obtained in the printing properties of the biomaterial 88C, compared to 90B and pure PLA and the 88C presented the best 3D printing characteristics. In addition, it also presented the best mechanical properties compared to the other groups of materials. Although the difference between these was not statistically significant (p=0.388), in the structures of the 88C biomaterial, values of compressive strength (8,84692 MPa) and modulus of elasticity (43,23615 MPa) were similar to those of cancellous bone in the jaws could be observed. Because of this result, the 88C biomaterial has the potential to be used in the manufacture of bioscaffolds in tissue engineering.

El objetivo es determinar cuál biopolímero presenta las mejores características de impresión 3D y propiedades mecánicas para la fabricación de un bioandamiaje, utilizando la técnica de impresión por deposición fundida, con modelos generados a partir de un archivo en formato STL que se obtuvo de un Micro-CT Scan de una estructura osea de cresta iliaca bovina. Mediante un estudio exploratorio, se realizaron 3 grupos de estudio con trece estructuras impresas de cada uno. El primero, se compone 100% de PLA. El segundo, 90B, se le agrega 1g de extracto de diatomea, y el tercero, 88C, se diferencia del anterior ya que contiene además, 1g de fosfato de calcio. A las 39 estructuras impresas se les realizó una prueba de inspección visual, por lo que se requirió la confección de un patrón de oro en resina, con mayor detalle y similitud a la estructura ósea escaneada. Finalmente, las estructuras fueron sometidas a una fuerza compresiva (N) para la obtención del módulo de elasticidad (MPa) y de la resistencia compresiva (MPa) de cada una de ellas. Se obtuvo una diferencia estadísticamente significativa (p=0,001) en las propiedades de impresión del biomaterial 88C, con respecto al 90B y al PLA puro, presentando las mejores características de impresión 3D. Además, obtuvo las mejores propiedades mecánicas en comparación con los otros grupos de materiales. Aunque la diferencia entre estos no fue estadísticamente significativa (p=0,388), en las estructuras del biomaterial 88C, se pudieron observar valores de resistencia compresiva (8,84692 MPa) y módulo de elasticidad (43,23615 MPa) que son semejantes a los del hueso esponjoso de los maxilares. A razón de este resultado, el biomaterial 88C cuenta con el potencial para ser utilizado en la fabricación de bioandamiajes en la ingeniería tisular.

Impresión 3D de modelos estereolitográficos con protocolo abierto / 3D Printing of Stereolithographic Models with Open Protocol

RESUMEN: Se realizó un estudio descriptivo y exploratorio con el objetivo de proponer y validar un protocolo abierto para hacer impresiones 3D de modelos estereolitográficos, que esté a disposición de profesionales en el área de la Odontología. Se capacitó mediante sesiones teórico prácticas, a nueve personas operadoras (estudiantes de último año de la carrera de Odontología), sin previa experiencia en el uso de software y hardware para impresión 3D, divididos en dos grupos; el A trabajó con tres tomografías helicoidales (TAC) y el B con tres Tomografías Computarizadas de Haz Cónico (CBCT), todas en formato DICOM, convertidas en archivos STL. En total se aplicó el protocolo en 99 estructuras óseas correspondientes a 33 mandíbulas, 33 axis y 33 macizos faciales-bases de cráneo, y se imprimieron un total de 33 mandíbulas en filamento PLA (ácido poliláctico). Al finalizar el estudio, no se encontró diferencia estadísticamente significativa en la implementación del protocolo propuesto entre los operadores, las mediciones de las piezas impresas por cada uno de ellos, el patrón de oro, la TAC y el CBCT, con lo cual no solo se validó el protocolo, sino que se logró determinar los recursos necesarios para realizar este tipo de impresiones 3D.

ABSTRACT: A descriptive and exploratory study was carried out with the aim of proposing and validating an open protocol for making 3D impressions of stereolithographic models, which is available to professionals in the area of Dentistry. Nine operators (senior students of the Dentistry degree), without previous experience in the use of software and hardware for 3D printing, divided into two groups were trained through theoretical and practical sessions. The A worked with three helical tomographies (TAC) and the B with three cone beam computed tomography (CBCT), all in DICOM format, converted to STL files. In total, 99 bone structures corresponding to 33 jaws, 33 axis and 33 facial masses-skull bases were analyzed, and a total of 33 jaws were printed in PLA (polylactic acid filament). At the end of the study, no statistically significant difference was found in the implementation of the proposed protocol between the operators, the measurements of the pieces printed by each of them, the gold standard, the TAC and the CBCT, with which not only validated the protocol, but it was possible to determine the resources necessary to carry out this type of 3D printing.

Digital Fabrication and Theater: Developing Social Skills in Young Adults With Autism Spectrum Disorder.

An action research project was carried out, using theater workshops and basic digital fabrication technology workshops to improve social skills-such as the expression of emotions, communication, self-control, and teamwork-in a group of 10 young individuals with autism spectrum disorder (ASD). This article focuses on the digital fabrication workshops, where participants worked on the fundamentals of electronics and programming, as well as 3D design and printing, to make props that were later used on stage in the theatrical performances in which they participated. These workshops were systematized through observation guides. According to the results, it was evident that the participants not only enjoyed and gained technological knowledge, but that their social skill development needs were addressed. Professionals from the Special Education Faculty and the Fab Lab Kä Träre, both from Universidad Estatal a Distancia in Costa Rica, were in charge of the study during its first phase, executed in 2016 and 2017.