Material loss at the femoral head taper: a comparison study of the Exeter metal-on-polyethylene and contemporary metal-on-metal total hip arthroplasty.

AIMS: There are limited published data detailing the volumetric material loss from tapers of conventional metal-on-polyethylene (MoP) total hip arthroplasties (THAs). Our aim was to address this by comparing the taper wear rates measured in an explanted cohort of the widely used Exeter THA with those measured in a group of metal-on-metal (MoM) THAs. PATIENTS AND METHODS: We examined an existing retrieval database to identify all Exeter V40 and Universal MoP THAs. Volumetric wear analysis of the taper surfaces was conducted using previously validated methodology. These values were compared with those obtained from a series of MoM THAs using non-parametric statistical methodology. A number of patient and device variables were accounted for using multiple regression modelling. RESULTS: A total of 95 Exeter MoP and 249 MoM THAs were examined. The median volumetric loss from the MoM cohort was over four times larger than that from the MoP cohort (1.01 mm3 vs 0.23 mm3, p < 0.001), despite a significantly shorter median period in vivo for the MoM group (48 months vs 90 months, p < 0.001). Multiple regression modelling indicated that the dominant variables leading to greater female taper material loss were bearing diameter (p < 0.001), larger female taper angles (p < 0.001), and male titanium stem tapers (p < 0.001). CONCLUSION: Consistent with the long-term clinical success of the device, the volumetric material loss from Exeter femoral head tapers was, in general, small compared with that from larger-diameter MoM head tapers. Cite this article: Bone Joint J 2018;100-B:1310-9.

Aseptic lymphocyte-dominated vasculitis-associated lesions are related to changes in metal ion handling in the joint capsules of metal-on-metal hip arthroplasties.

OBJECTIVES: We have encountered patients who developed large joint fluid collections with massive elevations in chromium (Cr) and cobalt (Co) concentrations following metal-on-metal (MoM) hip arthroplasties. In some cases, retrieval analysis determined that these ion concentrations could not be explained simply by the wear rates of the components. We hypothesized that these effects may be associated with aseptic lymphocyte-dominated vasculitis-associated lesion (ALVAL). PATIENTS AND METHODS: We examined the influence of the ALVAL grade on synovial fluid Co and Cr concentrations following adjustment for patient and device variables, including volumetric wear rates. Initially restricting the analysis to include only patients with one MoM hip resurfacing device, we performed multiple regression analyses of prospectively collected data. We then repeated the same statistical approach using results from a larger cohort with different MoM designs, including total hip arthroplasties. RESULTS: In the resurfacing cohort (n = 76), the statistical modelling indicated that the presence of severe ALVAL and a large fluid collection were associated with greater joint fluid Co concentrations after adjustment for volumetric wear rates (p = 0.005). These findings were replicated in the mixed implant group (n = 178), where the presence of severe ALVAL and a large fluid collection were significantly associated with greater fluid Co concentrations (p < 0.001). CONCLUSION: The development of severe ALVAL is associated with elevations in metal ion concentrations far beyond those expected from the volumetric loss from the prosthetic surfaces. This finding may aid the understanding of the sequence of events leading to soft-tissue reactions following MoM hip arthroplasties.Cite this article: D. J. Langton, R. P. Sidaginamale, T. J. Joyce, J. G. Bowsher, J. P. Holland, D. Deehan, A. V. F. Nargol, S. Natu. Aseptic lymphocyte-dominated vasculitis-associated lesions are related to changes in metal ion handling in the joint capsules of metal-on-metal hip arthroplasties. Bone Joint Res 2018;7:388-396. DOI: 10.1302/2046-3758.76.BJR-2018-0037.

A comparison study of stem taper material loss at similar and mixed metal head-neck taper junctions.

AIMS: We sought to determine whether cobalt-chromium alloy (CoCr) femoral stem tapers (trunnions) wear more than titanium (Ti) alloy stem tapers (trunnions) when used in a large diameter (LD) metal-on-metal (MoM) hip arthroplasty system. PATIENTS AND METHODS: We performed explant analysis using validated methodology to determine the volumetric material loss at the taper surfaces of explanted LD CoCr MoM hip arthroplasties used with either a Ti alloy (n = 28) or CoCr femoral stem (n = 21). Only 12/14 taper constructs with a rough male taper surface and a nominal included angle close to 5.666° were included. Multiple regression modelling was undertaken using taper angle, taper roughness, bearing diameter (horizontal lever arm) as independent variables. Material loss was mapped using a coordinate measuring machine, profilometry and scanning electron microscopy. RESULTS: After adjustment for other factors, CoCr stem tapers were found to have significantly greater volumetric material loss than the equivalent Ti stem tapers. CONCLUSION: When taper junction damage is identified during revision of a LD MoM hip, it should be suspected that a male taper composed of a standard CoCr alloy has sustained significant changes to the taper cone geometry which are likely to be more extensive than those affecting a Ti alloy stem. Cite this article: Bone Joint J 2017;99-B:1304-12.

Intracranial hypertension in subarachnoid hamorrhage: outcome after decompressive craniectomy.

Intracranial hypertension can occur following aneurysmal subarachnoid haemorrhage (SAH). It can be treated with decompressive craniectomy (DC) with the aim of reducing intracranial pressure, increasing cerebral perfusion and reducing further morbidity and mortality. We studied the outcome of patients undergoing DC following SAH at our institution, to ascertain whether the use of this treatment can be rationalized.

Does diverse grazing behavior of suckler cows have an impact on predicted methane emissions?

A modeling study based on a dataset from a large-scale grazing study was used to identify the potential impact of grazing behavior and performance of diverse cow genotypes on predicted methane (CH4) emissions. Lactating cows grazing extensive seminatural grassland and heath vegetation were monitored with Global Positioning System collars and activity sensors. The diet selected by cows of 3 different genotypes, Aberdeen Angus cross Limousin (AxL), Charolais (CHA), and Luing (LUI), was simulated by matching their locations during active periods with hill vegetation maps. Measured performance and activity were used to predict energy requirements, DMI, and CH4 output. The cumulative effect of actual performance, diet selection, and actual physical activity on potential CH4 output and yield was estimated. Sensitivity analyses were performed for the digestibility of intake, energy cost of activity, proportion of milk consumed by calves, and reproductive efficiency. Although with a better performance (P < 0.05), LUI required less total energy than the other genotypes (P < 0.001) as the other 2 spent more energy for maintenance (P < 0.001) and activity (P < 0.001). By selecting a better quality diet (P < 0.03), estimated CH4 of CHA cow-calf pairs was lower than AxL (P = 0.001) and slightly lower than LUI (P = 0.08). Energy lost as CH4 was 0.17 and 0.58% lower for LUI than AxL and CHA (P < 0.002). This study suggests for the first time that measured activity has a major impact on estimated CH4 outputs. A 15% difference of the cow-calf pair CH4 was estimated when using different coefficients to convert actual activity into energy. Predicted CH4 was highly sensitive to small changes in diet quality, suggesting the relative importance of diet selection on heterogeneous rangelands. Extending these results to a farm systems scale, CH4 outputs were also highly sensitive to reductions in weaning rates, illustrating the impact on CH4 at the farm-system level of using poorly adapted genotypes on habitats where their performances may be compromised. This paper demonstrates that variations in grazing behavior and grazing choice have a potentially large impact on CH4 emissions, illustrating the importance of including these factors in calculating realistic national and global estimates.

Practical considerations for volumetric wear analysis of explanted hip arthroplasties.

OBJECTIVES: Wear debris released from bearing surfaces has been shown to provoke negative immune responses in the recipient. Excessive wear has been linked to early failure of prostheses. Analysis using coordinate measuring machines (CMMs) can provide estimates of total volumetric material loss of explanted prostheses and can help to understand device failure. The accuracy of volumetric testing has been debated, with some investigators stating that only protocols involving hundreds of thousands of measurement points are sufficient. We looked to examine this assumption and to apply the findings to the clinical arena. METHODS: We examined the effects on the calculated material loss from a ceramic femoral head when different CMM scanning parameters were used. Calculated wear volumes were compared with gold standard gravimetric tests in a blinded study. RESULTS: Various scanning parameters including point pitch, maximum point to point distance, the number of scanning contours or the total number of points had no clinically relevant effect on volumetric wear calculations. Gravimetric testing showed that material loss can be calculated to provide clinically relevant degrees of accuracy. CONCLUSIONS: Prosthetic surfaces can be analysed accurately and rapidly with currently available technologies. Given these results, we believe that routine analysis of explanted hip components would be a feasible and logical extension to National Joint Registries. Cite this article: Bone Joint Res 2014;3:60-8.

Outcome in patients presenting with an aneurysm related intracerebral haemorrhage in the post-ISAT era.

BACKGROUND: The outcome in patients who present with an aneurysm related intracerebral haemorrhage (ICH) is poor. There are many treatment strategies now available to treat this group of patients. The management approach is dominated by a direct surgical approach for both aneurysm treatment and clot evacuation. It remains unclear, however, whether overall outcomes justify an aggressive treatment approach in this group of patients. We report our results of a pragmatic strategy based on availability of expertise and patient condition in patients presenting with an aneurysm related intracerebral haemorrhage. METHODS: We retrospectively identified and analysed prospectively collected data of SAH patients with concurrent ICH. The grade at presentation, treatment decision, complications, length of hospital stay, discharge destination, and 6 month outcome (Glasgow Outcome Score (GOS) at 6 months) were recorded. FINDINGS: Between August 2008 and January 2010, 40 patients (9.2%) with ICH were identified from the 433 patients with SAH. Twenty five patients (63%) were transferred across to the neurosurgical centre for further investigations and management. Most patients presented with poor WFNS grade (61%) and had right sided middle cerebral artery aneurysms (58%) with frontotemporal (42%) or temporoparietal (42%) haematomas. Management included craniotomy/craniectomy and clipping of the aneurysm in 18 patients (72%), coiling followed by surgical clot evacuation in five (20%), and craniectomy and coiling (4%) or coiling alone (4%). The outcome in treated patients was favourable (GOS 4 or 5) in 46% of patients with a 35% overall mortality. CONCLUSION: The presence of an aneurysm related ICH does not justify a nihilistic approach, as aggressive treatment is associated with a favourable outcome in 46% of patients. In the post-ISAT era, management should be patient specific and consideration should be given to both endovascular and open surgical therapy.

Ten-year clinical, radiological and metal ion analysis of the Birmingham Hip Resurfacing: from a single, non-designer surgeon.

We present the clinical results and survivorship of consecutive 100 Birmingham Hip Resurfacings in 90 patients at a minimum follow-up of ten years. All procedures were carried out by an independent surgeon who commenced a prospective study in 1998. Patients were assessed clinically using the Western Ontario and McMaster Universities osteoarthritis index, Short-Form 36, Harris hip score and University of California, Los Angeles activity score. Radiological analysis was performed by an independent observer and blood metal ion levels concentrations were measured at ten years post-operatively in 62 patients. The median acetabular component inclination was 46.2° (34° to 59°) and anteversion 11.0° (0° to 30°). The median chromium concentration in the unilateral group was 1.74 (0.41 to 15.23) and for the bilateral group was 2.98 (1.57 to 18.01). The equivalent values for cobalt were 1.67 (0.54 to 20.4) and 1.88 (1.38 to 19.32). In total there were eight failures giving an overall survival at ten years of 92% (95% confidence interval (CI) 86.7 to 97.3). BHR in male patients had an improved survivorship of 94.6% (95% CI 89.4 to 100) compared with females at 84.6% (95% CI 70.7 to 98.5), but this did not reach statistical significance (p = 0.119). Four of the nine BHRs with a bearing diameter of 42 mm failed. The overall results were consistent with data produced from other centres in that the clinical outcome of large male patients was extremely encouraging, whereas the survival of the smaller joints was less satisfactory.

What advantage is there to be gained using large modular metal-on-metal bearings in routine primary hip replacement? A preliminary report of a prospective randomised controlled trial.

The aim of this study was to investigate the possible benefit of large-head metal-on-metal bearing on a stem for primary hip replacement compared with a 28 mm diameter conventional metal-on-polyethylene bearing in a prospective randomised controlled trial. We investigated cemented stem behaviour between these two different bearings using Einzel-Bild-Röntgen-Analyse, clinical and patient reported measures (Harris hip score, Western Ontario and McMaster Universities osteoarthritis index, Short Form-36 and satisfaction) and whole blood metal ion levels at two years. A power study indicated that 50 hips were needed in each group to detect subsidence of > 5 mm at two years with a p-value of < 0.05. Significant improvement (p < 0.001) was found in the mean clinical and patient reported outcomes at two years for both groups. Comparison of outcomes between the groups at two years showed no statistically significant difference for mean stem migration, clinical and patient reported outcomes; except overall patient satisfaction which was higher for metal-on-metal group (p = 0.05). Metal ion levels were raised above the Medicines and Healthcare products Regulatory Agency advised safety level (7 µg per litre) in 20% of the metal-on-metal group and in one patient in metal-on-polyethylene group (who had a metal-on-metal implant on the contralateral side). Two patients in the metal-on-metal group were revised, one for pseudotumour and one for peri-prosthetic fracture. Use of large modular heads is associated with a risk of raised whole blood metal ion levels despite using a proven bearing from resurfacing. The head-neck junction or excess stem micromotion are possibly the weak links warranting further research.

Adverse reaction to metal debris following hip resurfacing: the influence of component type, orientation and volumetric wear.

We sought to establish the incidence of joint failure secondary to adverse reaction to metal debris (ARMD) following metal-on-metal hip resurfacing in a large, three surgeon, multicentre study involving 4226 hips with a follow-up of 10 to 142 months. Three implants were studied: the Articular Surface Replacement; the Birmingham Hip Resurfacing; and the Conserve Plus. Retrieved implants underwent analysis using a co-ordinate measuring machine to determine volumetric wear. There were 58 failures associated with ARMD. The median chromium and cobalt concentrations in the failed group were significantly higher than in the control group (p < 0.001). Survival analysis showed a failure rate in the patients with Articular Surface Replacement of 12.8% [corrected] at five years, compared with < 1% at five years for the Conserve Plus and 1.5% at ten years for the Birmingham Hip Resurfacing. Two ARMD patients had relatively low wear of the retrieved components. Increased wear from the metal-on-metal bearing surface was associated with an increased rate of failure secondary to ARMD. However, the extent of tissue destruction at revision surgery did not appear to be dose-related to the volumetric wear.

Comparison of patient-reported outcomes between hip resurfacing and total hip replacement.

This study compared the demographic, clinical and patient-reported outcomes after total hip replacement (THR) and Birmingham Hip Resurfacing (BHR) carried out by a single surgeon. Patients completed a questionnaire that included the WOMAC, SF-36 scores and comorbid medical conditions. Data were collected before operation and one year after. The outcome scores were adjusted for age, gender, comorbid conditions and, at one year, for the pre-operative scores. There were 214 patients with a THR and 132 with a BHR. Patients with a BHR were significantly younger (49 vs 67 years, p < 0.0001), more likely to be male (68% vs 42% of THR, p < 0.0001) and had fewer comorbid conditions (1.3 vs 2.0, p < 0.0001). Before operation there was no difference in WOMAC and SF-36 scores, except for function, in which patients awaiting THR were worse than those awaiting a BHR. At one year patients with a BHR reported significantly better WOMAC pain scores (p = 0.04) and in all SF-36 domains (p < 0.05). Patients undergoing BHR report a significantly greater improvement in general health compared with those with a THR.

Assessing tumor hypoxia by positron emission tomography with Cu-ATSM.

For the last several decades, hypoxia has been recognized to be one of the key factors in tumor aggression and an important impediment to local and distant control of malignant tumors. In addition, hypoxia is a major cause of failure of both radiation therapy and chemotherapy. It has been shown that hypoxia is an independent negative prognostic factor for patient outcome in various solid tumors. Clinical studies using polarographic oxygen electrodes, as a tool for measuring hypoxia, were the first to demonstrate the presence of hypoxia in human tumors and its association with poor prognosis. However, this method is invasive and has technical limitations that prevent its routine clinical use. Over the years, imaging as a noninvasive method has attracted a lot of attention and several radiotracers have been developed for noninvasive evaluation of hypoxia. One of the most promising radiotracers is the copper(II) complex of diacetyl-2,3-bis(N(4)-methyl-3-thiosemicarbazonato) ligand (Cu-ATSM) for imaging with positron emission tomography. In this review, the preclinical evaluation of Cu-ATSM as well as its clinical value in several solid tumors will be discussed.

In vitro assays for assessing the potential for copper complexes to function as radiopharmaceutical agents.

A series of chemical in vitro assays are described to provide a rapid initial assessment of the in vivo stability and biological behaviour of potential new copper(II) based radiopharmaceutical agents. Chemical challenges using an excess of cysteine, glutathione (GSH) and histidine, which are models of S- and N-donor molecules found in vivo, are used to provide a measure of the potential for loss of the copper(II) ion from the radiopharmaceutical as a result of ligand dissociation. In addition, thiol containing molecules such as cysteine and GSH provide a redox challenge, whereby the copper(II) complex may be reduced to give a copper(I) species. The stability of the copper(I) species toward oxidation, protonation, and ligand dissociation may be crucial in determining the biodistribution, the biological half-life and excretion mechanisms of a potential radiopharmaceutical. Further evaluation of the redox stability is assessed using the ubiquitous biological reductant ascorbic acid. The relative stability of a complex with respect to ligand dissociation in human serum provides one of the most important experiments assessing the potential of a complex to be used in vivo. Further challenge experiments with serum proteins such as thioredoxin and serum albumin can be used to provide more detailed information on the probable fate of the complex in serum. Evaluation of complex stability and speciation over a range of pH values may also be used to obtain information on potential biodistribution.

Should we reconsider all-polyethylene tibial implants in total knee replacement?

The role of modular tibial implants in total knee replacement is not fully defined. We performed a prospective randomised controlled clinical trial using radiostereophotogrammetric analysis to compare the performance of an all-polyethylene tibia with a metal-backed cruciate-retaining condylar design, PFC-Sigma total knee replacement for up to 24 months. There were 51 patients who were randomised into two treatment groups. There were 10 subsequent withdrawals, leaving 21 all-polyethylene and 20 metal-backed tibial implants. No patient was lost to follow-up. There were no significant demographic differences between the groups. At two years one metal-backed implant showed migration > 1 mm, but no polyethylene implant reached this level. There was a significant increase in the SF-12 and Oxford knee scores after operation in both groups. In an uncomplicated primary total knee replacement the all-polyethylene PFC-Sigma tibial prosthesis showed no statistical difference in migration from that of the metal-backed counterpart. There was no difference in the clinical results as assessed by the SF-12, the Oxford knee score, alignment or range of movement at 24 months, although these assessment measures were not statistically powered in this study.

Fetal gonadotrope cell origin of FSH-secreting pituitary adenoma - insight into human pituitary tumour pathogenesis.

OBJECTIVE: The pathogenesis of human pituitary adenomas remains unclear, but we report a case of FSH-secreting pituitary adenoma whose monohormonal phenotype suggests it was of fetal origin. PATIENTS: A 28-year-old woman presented with abdominal discomfort and irregular menses, enlarged multicystic ovaries and elevated serum oestradiol, with sustained high-normal FSH and low LH levels. MEASUREMENTS: Endocrine studies were performed before and after curative surgery, with assessment of tumour hormone secretion in vitro, and immunostaining of tumour tissue for a series of gonadotrope proteins. RESULTS: Immunocytochemistry showed that tumour cells were monohormonal for FSH. Normal components of gonadotrope signalling pathways were expressed, including oestrogen receptor-alpha, activin receptors, secretogranin-II and chromogranin-A. beta-glycan, the putative inhibin coreceptor, was absent. Tumour culture in vitro confirmed secretion of FSH with minimal LH, that was unsuppressed by oestradiol or inhibin-A. Human fetal pituitary tissue contained FSH-only cells at 18 weeks gestation, whereas normal adult pituitary tissue contained only bihormonal gonadotropes. CONCLUSIONS: We propose that this pituitary adenoma represents an indolent tumour of monohormonal fetal gonadotrope cells that originated early in gestation. Pituitary tumours may therefore arise from abnormal persistence of fetal cell types, with extremely slow growth over many years until reaching a size threshold to generate an endocrine syndrome. Understanding fetal pituitary architecture and function may be more informative for new insights into pituitary tumour pathogenesis than classical theories of cancer biology that invoke unrestrained cell proliferation.

Thoracic intradural extramedullary capillary haemangioma.

The authors report a rare case of thoracic intradural extramedullary capillary haemangioma, the clinical presentation of which was similar to any other intraspinal mass. Magnetic resonance imaging does not always distinguish this entity from others, but the presence of enlarged vasculature is often a useful clue. Complete resection is the treatment of choice of this hamartomatous lesion.

Removal of acetabular bone in resurfacing arthroplasty of the hip: a comparison with hybrid total hip arthroplasty.

Resurfacing arthroplasty of the hip is being performed more frequently in the United Kingdom. The majority of these patients are younger than 55 years of age, and in this group the key benefits include conservation of femoral bone stock and the potential reduction in the rate of dislocation afforded by the larger resurfacing head. Early aseptic loosening is well recognised in patients younger than 55 years of age, and proponents of resurfacing believe that the improved wear characteristics of the metal-on-metal bearing may improve the long-term survival of this implant. There has been some concern, however, that resurfacing may not be conservative of acetabular bone. We compared a series of 33 consecutive patients who had a hybrid total hip arthroplasty with an uncemented acetabular component and a cemented femoral implant, with 35 patients undergoing a Birmingham hip resurfacing arthroplasty. We compared the diameter of the implanted acetabulum in both groups and, because they were not directly comparable, we corrected for patient size by measuring the diameter of the contralateral femoral head. The data were analysed using unpaired t-tests and analysis of covariance. There was a significantly larger acetabulum in the Birmingham arthroplasty group (mean diameter 56.6 mm vs 52.0 mm; p < 0.001). However, this group had a significantly larger femoral head diameter on the contralateral side (p = 0.03). Analysis of covariance revealed a significant difference between the mean size of the acetabular component implanted in the two operations. The greatest difference in the size of acetabulum was in those patients with a larger diameter of the femoral head. This study shows that more bone is removed from the acetabulum in hip resurfacing than during hybrid total hip arthroplasty, a difference which is most marked in larger patients.

Comparison of offset in Birmingham hip resurfacing and hybrid total hip arthroplasty.

Hip resurfacing is being performed more frequently in the United Kingdom. The possible benefits include more accurate restoration of leg length, femoral offset and femoral anteversion than occurs after total hip arthroplasty (THA). We compared anteroposterior radiographs from 26 patients who had undergone hybrid THA (uncemented cup/cemented stem), with 28 who had undergone Birmingham Hip Resurfacing arthroplasty (BHR). We measured the femoral offset, femoral length, acetabular offset and acetabular height with reference to the normal contralateral hip. The data were analysed by paired t-tests. There was a significant reduction in femoral offset (p = 0.0004) and increase in length (p = 0.001) in the BHR group. In the THA group, there was a significant reduction in acetabular offset (p = 0.0003), but femoral offset and overall hip length were restored accurately. We conclude that hip resurfacing does not restore hip mechanics as accurately as THA.

Remote hypertensive intracerebral haematoma following clipping of an intracranial aneurysm.

We report a case of a 58-year-old woman who presented with an aneurysmal subarachnoid haemorrhage. Immediately following clipping of this aneurysm, she had a spontaneous hypertensive bleed in the contralateral hemisphere. Although very unusual, hypertensive episodes following aneurysmal subarachnoid haemorrhage must carry a risk of such an intracranial event.