RESUMEN
BACKGROUND: Comorbidities of chronic obstructive pulmonary disease (COPD) influence clinical characteristics and prognosis. OBJECTIVES: This study compared the clinical characteristics and exacerbation rate of COPD according to the presence of depression or anxiety. DESIGN: This study used data from The Korea COPD Subgroup Study (KOCOSS) cohort, a nationwide prospective cohort from 54 medical centers, between April 2012 and 2019. METHODS: Depression and anxiety were diagnosed with the Beck Depression Inventory and Beck Anxiety Inventory. Negative binomial regression analysis was performed to analyze the frequency of exacerbations in depressed patients and anxiety. Differences in lung function trajectory according to presence of depression/anxiety were analyzed using a linear mixed model. RESULTS: In all, 2147 patients were enrolled. Depressed patients or anxiety had lower lung function, higher modified Medical Research Council (mMRC) grade, St. George Respiratory Questionnaire (SGRQ) score, and COPD assessment test score, and higher rates of exacerbation in the past year than those without depression/anxiety. Depressed patients had a higher frequency of moderate to severe exacerbations [Incidence Rate Ratio (IRR): 1.57, CI: 1.17-2.11, p = 0.002] and those with anxiety had higher frequencies of moderate to severe (IRR: 1.52, CI: 1.03-2.27, p = 0.038) and severe exacerbations (IRR: 2.13, CI: 1.09-4.15, p = 0.025) during 1-year follow-up compared to those without these comorbidities. The differences in the change in annual forced expiratory volume in 1 seconds (FEV1) over 3 years according to the presence of depression or anxiety were not statistically significant. CONCLUSION: Depressed and anxious patients showed increased respiratory symptoms and exacerbation rate as well as reduced health-related quality of life, whereas there were no significant differences in changes in lung function between groups with and without depression/anxiety.
Asunto(s)
Depresión , Enfermedad Pulmonar Obstructiva Crónica , Humanos , Depresión/diagnóstico , Depresión/epidemiología , Estudios Prospectivos , Calidad de Vida , Ansiedad/diagnóstico , Ansiedad/epidemiología , Enfermedad Pulmonar Obstructiva Crónica/diagnóstico , Enfermedad Pulmonar Obstructiva Crónica/epidemiologíaRESUMEN
For stable lithium deposition without dendrites, three-dimensional (3D) porous structure has been intensively investigated. Here, we report the use of carbon-doped graphitic carbon nitride (C-doped g-C3N4) microspheres as a 3D host for lithium to suppress dendrite formation, which is crucial for stable lithium deposition. The C-doped g-C3N4microspheres have a high surface area and porosity, allowing for efficient lithium accommodation with high accessibility. The carbon-doping of the g-C3N4microspheres confers lithiophilic properties, which facilitate the regulation of Li+flux and dense filling of cavities with nucleated lithium, thereby preventing volume expansion and promoting dendrite-free Li deposition. The electrochemical performance was improved with cyclic stability and high Coulombic efficiency over 260 cycles at 1.0 mA cm-2for 1.0 mAh cm-2, and even over 70 cycles at 5.0 mA cm-2for 3.0 mAh cm-2. The use of C-doped g-C3N4microspheres as a 3D Li host shows promising results for stable lithium deposition without dendrite formation.
RESUMEN
BACKGROUND: Patients with lung cancer experience considerable symptom burden, which can decrease patients' QOL. Our aim was to investigate the association between QOL questionnaire at diagnosis and survival of lung cancer. PATIENTS AND METHODS: This was a multicenter study of lung cancer patients at 7 medical centers of the Catholic University of Korea that responded to a quality of life questionnaire between December 1, 2017 and December 31, 2020. We analyzed 5 functional (physical, role, emotional, cognitive, and social functioning) and nine symptom (fatigue, nausea and vomiting, pain, dyspnea, insomnia, appetite loss, constipation, diarrhea, and financial difficulties) scales and examined their associations with survival. A Cox proportional hazards model was used to evaluate the prognostic value. RESULTS: In total, 1297 lung cancer patients were enrolled. The results of multivariable analysis showed that female, younger age, never smoker, stage I or II cancer, higher physical functioning, and emotional functioning were statistically significant favorable predictors for survival. On subgroup analysis according to early (stage I and II) or advanced (stage III or IV) stage, higher physical functioning and emotional functioning were each found to be favorable prognostic factors for survival. Meanwhile, fatigue, pain, insomnia, and financial difficulties were found to be associated with low scores on the emotional functioning scale; fatigue, pain, dyspnea, and financial difficulties were associated with low scores on the physical functioning scale. CONCLUSION: Assessing the physical functioning and emotional functioning scales of QOL questionnaire items at diagnosis can help clinicians predict the survival of patients with lung cancer.
Asunto(s)
Neoplasias Pulmonares , Trastornos del Inicio y del Mantenimiento del Sueño , Humanos , Femenino , Neoplasias Pulmonares/diagnóstico , Calidad de Vida , Dolor , Disnea , Encuestas y Cuestionarios , FatigaRESUMEN
Inductively coupled plasma mass spectrometry (ICP-MS) was applied to determine the concentrations of lead (Pb), cadmium (Cd) and arsenic (As) in Lindera aggregata (Sims) Kosterm. The physiologically based extraction test (PBET) digestion in vitro/Caco-2 cell model was established to investigate the bioaccessible contents of Pb, Cd and As in decoction of Lindera aggregata (Sims) Kosterm. The target-organ toxicity dose modification of HI method (TTD) was used to evaluate the cumulative risk caused by the combined exposure of the total levels of Pb, Cd and As in Lindera aggregata (Sims) Kosterm. and the bioaccessible contents in the decoction. The results showed that the total contents of Pb, Cd and As in 4 batches of samples were in the range of 2.901-3.872, 1.299-1.800 and 0.062-0.216 mg·kg-1, respectively. After transportation by Cacco-2 cells, the bioaccessible contents of Pb, Cd, and As in the decoction were in the range of 0.045-0.080, 0.070-0.112 and 0.004-0.018 mg·kg-1. The results of risk assessment showed that calculated by the total amounts of heavy metals in the Lindera aggregata (Sims) Kosterm., for the end points of nervous system, the cumulative risks of co-exposure of heavy metals in 3 batches of samples were of concern. After decoction and transportation by Caco-2 cells, for the end points of cardiovascular system, blood, nervous system, kidney and testis, the TTD modification of HI values of all batches of samples were less than 1, and the health risks were acceptable. The study provided methodology basis for a more objective assessment of the health risks of heavy metals and harmful elements in traditional Chinese medicine and for a more scientific limit standard of heavy metals and harmful elements.
RESUMEN
Polysaccharides and free monosaccharides are important active components in Cistanches Herba, which have functions of anti-aging and immunological activity regulation. The study of monosaccharide composition in polysaccharide and free monosaccharide can lay a foundation for the study of primary structure, spatial structure of Cistanche polysaccharide and biological activity of Cistanches Herba. In this study, a method of water extraction and alcohol precipitation was used to extract Cistanche polysaccharide. Trifluoroacetic acid was selected as the hydrolytic acid for polysaccharide hydrolysis. An orthogonal experimental method is established. Three levels of acid concentration, hydrolysis temperature and hydrolysis time were selected to investigate the optimal hydrolysis condition. The optimal hydrolysis condition was 0.08 mol·L-1 trifluoroacetic acid hydrolysis at 100 ℃ for 3 h. The free monosaccharides of Cistanches Herba were extracted by water extraction. The established ion chromatogram integrated pulsed amperometry method can efficiently separate 11 monosaccharides in a short time. The method has good repeatability and high sensitivity, methodological experiment results meet the requirements of quantitative determination. It can accurately determine the monosaccharide composition of Cistanche polysaccharide and free monosaccharide content. Ion chromatography does not require derivatization operation and the pre-treatment steps are simple. This method can measure fructose, but PMP derivation-HPLC method can't. The monosaccharide composition of Cistanche polysaccharide include fucose, arabinose, rhamnose-galactose, glucose, xylose, mannose, fructose, ribose and glucuronic acid, among which the contents of glucose and fructose are relatively high. The free monosaccharides in the water extract of Cistanches Herba include glucose, fructose and mannose.
RESUMEN
Childhood to adolescence is an accelerated growth period, and genetic features can influence differences of individual growth patterns. In this study, we examined the genetic basis of early age facial growth (EAFG) patterns. Facial shape phenotypes were defined using facial landmark distances, identifying five growth patterns: continued-decrease, decrease-to-increase, constant, increase-to-decrease, and continued-increase. We conducted genome-wide association studies (GWAS) for 10 horizontal and 11 vertical phenotypes. The most significant association for horizontal phenotypes was rs610831 (TRIM29; ß = 0.92, p-value = 1.9 × 10-9) and for vertical phenotypes was rs6898746 (ZSWIM6; ß = 0.1103, p-value = 2.5 × 10-8). It is highly correlated with genes already reported for facial growth. This study is the first to classify and characterize facial growth patterns and related genetic polymorphisms.
Asunto(s)
Cara , Estudio de Asociación del Genoma Completo , Desarrollo Maxilofacial , Pueblo Asiatico/genética , Proteínas de Unión al ADN/genética , Humanos , Desarrollo Maxilofacial/genética , Fenotipo , República de Corea , Factores de Transcripción/genéticaRESUMEN
Automating screening and diagnosis in the medical field saves time and reduces the chances of misdiagnosis while saving on labor and cost for physicians. With the feasibility and development of deep learning methods, machines are now able to interpret complex features in medical data, which leads to rapid advancements in automation. Such efforts have been made in ophthalmology to analyze retinal images and build frameworks based on analysis for the identification of retinopathy and the assessment of its severity. This paper reviews recent state-of-the-art works utilizing the color fundus image taken from one of the imaging modalities used in ophthalmology. Specifically, the deep learning methods of automated screening and diagnosis for diabetic retinopathy (DR), age-related macular degeneration (AMD), and glaucoma are investigated. In addition, the machine learning techniques applied to the retinal vasculature extraction from the fundus image are covered. The challenges in developing these systems are also discussed.
RESUMEN
Despite the extremely high energy density of the lithium metal, dendritic lithium growth caused by nonuniform lithium deposition can result in low Coulombic efficiency and safety hazards, thereby inhibiting its practical applications. Here, we report a new strategy for adopting a nanopatterned gold (Au) seed on a copper current collector for uniform lithium deposition. We find that Au nanopatterns enhance lithium metal battery performance, which is strongly affected by the feature dimensions of Au nanopatterns (diameter and height). Ex situ scanning electron microscopy images confirm that this can be attributed to the perfectly selective lithium nucleation and uniform growth resulting from the spatial confinement effect. The spatial arrangement of Au dot seeds homogenizes the Li+ flux and electric field, and the size-controlled Au seeds prevent both seed-/substrate-induced agglomeration and interseed-induced lithium growth, leading to uniform lithium deposition. This dendrite-free lithium deposition results in the improvement of electrochemical performance, and the system showed cyclic stability over 300 cycles at 0.5 mA cm-2 and 200 cycles at 1.0 mA cm-2 (1 mA h cm-2) and a high rate capability. This study provides in-depth insights into the more complicated and diverse seed geometry control of seed materials for the development of high-performance lithium metal batteries.
RESUMEN
Objective:To conduct quality evaluation of Ginkgo Folium preparations by analyzing the national evaluation sampling test results, analyze the quality differences, and put forward suggestions for the improvement of quality standards and market supervision. Method:The contents of total flavonol glycosides and terpene lactones in Ginkgo Folium tablets and Ginkgo Folium capsules were determined according to the methods of determination in the 2015 edition of Chinese Pharmacopoeia (the first volume), and the contents of free flavonoids (quercetin, kaempferide and isorhamnetin) and sophoricoside in Ginkgo Folium preparations were determined according to related supplementary testing method of Ginkgo Folium tablets and Ginkgo Folium capsules issued by National Medical Products Administration. The quality differences of Ginkgo Folium preparations from different batches and different manufacturers were compared according to the contents of total flavonol glycosides, terpene lactones, free flavonoids and sophoricoside in 328 batches of Ginkgo Folium tablets and Ginkgo Folium capsules manufactured by 48 enterprises. Result:Quality of 328 batches of Ginkgo Folium tablets and Ginkgo Folium capsules was in accordance with the standard, but the contents of terpene lactones and total flavonol glycosides were all distributed in a wide range, and the quality of samples varied greatly among different enterprises. Conclusion:It is recommended that each enterprise should optimize the production process and strictly control the raw materials to ensure the consistency between different batches of samples.
RESUMEN
Objective:To establish ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) for simultaneous determination of six hepatotoxic pyrrolizidine alkaloids in Verbenae Herba, and to carry out preliminary risk assessment according to the research results. Method:An ACQUITY UPLC HSS T3 column (2.1 mm×100 mm, 1.8 μm) was used for analysis with 0.05% formic acid and 2.5 mmol·L<sup>-1</sup> ammonium formate in water (A)-0.05% formic acid and 2.5 mmol·L<sup>-1</sup> ammonium formate in acetonitrile (B) as mobile phase for gradient elution (0-12 min, 3%-8%B; 12-25 min, 8%-15%B; 25-26 min, 15%-3%B; 26-30 min, 3%B), the flow rate was 0.3 mL·min<sup>-1</sup>, the column temperature was 40 ℃, and the injection volume was 1 μL. MS system was operated by electrospray ionization (ESI) in the positive ion mode with multiple reaction monitoring mode. MS parameters of triple quadrupole and six analytes were optimized for qualitative and quantitative analysis. According to the determination results, the risk assessment was carried out by using margin of exposure (MOE) combined with transfer rate of hot water extraction. Result:Based on the instrument precision, linear range, repeatability, stability, recovery and other methodological validations, the results were in conformity with relevant standards of quantitative analysis. The linear ranges of intermedine, lycopsamine, intermedine <italic>N</italic>-oxide, lycopsamine<italic> N</italic>-oxide, echimidine<italic> N</italic>-oxide and echimidine were good (<italic>r</italic>≥0.999 0) between peak area and mass concentration in the ranges of 0.984-49.20, 0.994-49.70, 1.012-50.60, 1.032-51.60, 1.004-50.20, 1.016-50.80 µg·L<sup>-1</sup>, respectively. The average recoveries of these six analytes were 87.2%-94.2% with relative standard deviation (RSD)<4.0%. Their MOE values were >10 000. Conclusion:The UPLC-MS/MS established in this study is stable and feasible, which can provide scientific basis for the quality control and safety evaluation of hepatotoxic pyrrolizidine alkaloids in Verbenae Herba.
RESUMEN
This study aims to develop a UPLC-MS/MS method for simultaneous determination of six pyrrolizidine alkaloids(PAs)--intermedine N-oxide(ImNO), lycopsamine N-oxide(LyNO), seneciphylline(Sp), seneciphylline N-oxide(SpNO), senecionine N-oxide(SnNO), and senkirkine(Sk) in different parts of Emilia sonchifolia. UPLC conditions are as follows: ACQUITY UPLC HSS T3 column(2.1 mm×100 mm, 1.8 μm), mobile phase consisting of 0.05% formic acid and 2.5 mmol·L~(-1) ammonium formate in water(A)-0.05% formic acid and 2.5 mmol·L~(-1) ammonium formate in acetonitrile(B) for gradient elution. MS conditions are as below: electrospray ionization(ESI) in the positive ion mode, multiple reaction monitoring(MRM), and the content of the six PAs was calculated with the external standard method. The results suggested the differences in the six PAs among different parts of E. sonchifolia. Sk was detected in all the four parts, with similar content. SnNO also existed in all the four parts, but the content in roots was significantly higher than that in other parts. Sp and SpNO were found in both roots and flowers, with the content higher in the former than in the later. ImNO and LyNO were only found in leaves, and the content was low. Among the six components detected, ImNO, LyNO, and SpNO were found and determined for the first time, which enriched the toxic components and laid a scientific basis for the quality and safety evaluation of E. sonchifolia.
Asunto(s)
Asteraceae , Cromatografía Líquida de Alta Presión , Cromatografía Liquida , Alcaloides de Pirrolicidina , Espectrometría de Masas en TándemRESUMEN
To learn the current situation and strengthen the management of national standards for Chinese medicinal materials, we sorted out the relevant national standards. According to incomplete statistics, there are 1 185 kinds of Chinese medicinal materials, including 1 024 kinds of plant medicines, 106 kinds of animal medicines, and 54 kinds of mineral medicines, in addition to ethnic medicinal materials with different functions. The relevant standards include 819 Pharmacopoeia standards, 342 standards issued by the Ministry of Health or National Medicinal Products Administration, 7 standards for new medicinal materials, and 17 standards for imported medicinal materials. In this paper, the sources of standards as well as the distribution of families and genera and the distribution of medicinal parts of medicinal materials are analyzed. The suggestions are as follows:(1)to improve the coordination among different national standards of Chinese medicinal materials;(2)to improve the standardization and controllability of relevant standards;(3)to revise the issued standards for Chinese medicinal materials(including Tibetan, Uygur, and Mongolian medicinal materials).
Asunto(s)
Animales , Humanos , Pueblo Asiatico , China , Medicamentos Herbarios Chinos , Medicina Tradicional China , Plantas Medicinales , Estándares de ReferenciaRESUMEN
Evaporative light scattering detector(ELSD) and charged aerosol detector(CAD) methods were established in this study for the content determination of four kinds of sugars in Zhusheyong Yiqi Fumai(YQFM), and the factors affecting the accuracy of CAD methods were discussed. HPLC-ELSD chromatographic separation was performed on a Shodex Asahipak NH2 P-50 column with acetonitrile-water(75â¶25)as the mobile phase, with a flow rate of 0.8 mL·min~(-1), drift tube temperature of 80 â. The analysis by HPLC-CAD was performed on the same column with acetonitrile-water as mobile phase for gradient elution, with a flow rate of 0.8 mL·min~(-1), a neb temperature of 45 â, and power function(PF) of 1.3. The samples of YQFM were detected by ELSD and CAD respectively. It was found that YQFM was composed of fructose, glucose, sucrose and maltose. The linear relationship of the two methods was good, and the recoveries, reproducibility and stability of these four kinds of sugars measured by the two methods satisfied the requirements of methodology. Both CAD and ELSD detectors were accurate and reliable in detecting saccharides components in YQFM. In addition, it was revealed in this study for the first time that the PF parameter of CAD had an important influence on the accuracy of sugar determination and acted as the key parameter of CAD method. It was also found that for CAD, a non-linear detector, there was no significant difference between the results of linear regression and logarithmic regression.
Asunto(s)
Carbohidratos , Azúcares , Aerosoles , Cromatografía Líquida de Alta Presión , Luz , Reproducibilidad de los Resultados , Dispersión de RadiaciónRESUMEN
OBJECTIVES: This study aimed to demonstrate the application of our automated facial recognition system to measure facial nerve function and compare its effectiveness with other conventional systems and provide a preliminary evaluation of deep learning-facial grading systems. STUDY DESIGN: Retrospective, observational. SETTING: Tertiary referral center, hospital. PATIENTS: Facial photos taken from 128 patients with facial paralysis and two persons with no history of facial palsy were analyzed. INTERVENTION: Diagnostic. MAIN OUTCOME MEASURES: Correlation with Sunnybrook (SB) and House-Brackmann (HB) grading scales. RESULTS: Our results had good reliability and correlation with other grading systems (râ=â0.905 and 0.783 for Sunnybrook and HB grading scales, respectively), while being less time-consuming than Sunnybrook grading scale. CONCLUSIONS: Our objective method shows good correlation with both Sunnybrook and HB grading systems. Furthermore, this system could be developed into an application for use with a variety of electronic devices, including smartphones and tablets.
Asunto(s)
Parálisis Facial , Reconocimiento Facial , Asimetría Facial , Parálisis Facial/diagnóstico , Humanos , Reproducibilidad de los Resultados , Estudios RetrospectivosRESUMEN
The luminescence quenching behavior and energy transfer process in hydrothermally grown Eu3+-doped YVO4 nanophosphors were studied using low temperature photoluminescence spectroscopy. The luminescence efficiency of nanophosphor is dependent on the acidity of its solution media and the post annealing condition after hydrothermal processing. The overall results suggest that the abnormal luminescence behavior of Eu3+-doped nanocrystalline YVO4 under low temperature photoexcitation is due to the incorporated non-radiative hydroxyl groups often encountered in hydrothermal synthesis as well as to the inefficient energy transfer to luminescent ions from vanadate groups.
RESUMEN
Facial expressions are one of the important non-verbal ways used to understand human emotions during communication. Thus, acquiring and reproducing facial expressions is helpful in analyzing human emotional states. However, owing to complex and subtle facial muscle movements, facial expression modeling from images with face poses is difficult to achieve. To handle this issue, we present a method for acquiring facial expressions from a non-frontal single photograph using a 3D-aided approach. In addition, we propose a contour-fitting method that improves the modeling accuracy by automatically rearranging 3D contour landmarks corresponding to fixed 2D image landmarks. The acquired facial expression input can be parametrically manipulated to create various facial expressions through a blendshape or expression transfer based on the FACS (Facial Action Coding System). To achieve a realistic facial expression synthesis, we propose an exemplar-texture wrinkle synthesis method that extracts and synthesizes appropriate expression wrinkles according to the target expression. To do so, we constructed a wrinkle table of various facial expressions from 400 people. As one of the applications, we proved that the expression-pose synthesis method is suitable for expression-invariant face recognition through a quantitative evaluation, and showed the effectiveness based on a qualitative evaluation. We expect our system to be a benefit to various fields such as face recognition, HCI, and data augmentation for deep learning.
Asunto(s)
Cara , Expresión Facial , Simulación por Computador , Emociones , Músculos Faciales , Humanos , Imagenología Tridimensional , MovimientoRESUMEN
Heavy metals and other harmful elements in traditional Chinese medicines inflict serious damage on public health. Therefore, risk assessment of Chinese raw materials has gained increasing attention. To date, few reports have been published on the health risk assessment of heavy metals and harmful elements in Chinese patent medicines. To gain a comprehensive understanding of heavy metals and other harmful elements in Chinese patent medicines and to establish proper limits, residual Pb, Cd, As, Hg, Cu and Cr in 15 054 samples of 295 drugs was analyzed with regard to distribution and variation between elements and dosage forms. In addition, in accord with procedures including hazard identification, hazard characterization, exposure assessment and risk characterization, basic procedures and specific parameters for risk assessment of heavy metals and harmful elements in Chinese patent medicines were clarified based on the health risk assessment of 14 787 samples and 276 drugs. A method and equation for establishing residual limits is proposed. The results show that content and target hazard quotients (THQs) of the investigated elements in all samples showed a skewed distribution approaching 0. Content of Pb, As, Cu, Hg, Cd or Cr in the samples exceeded 100 mg·kg-1 and the content of Pb, As, or Cu in individual samples exceeded 1 000 mg·kg-1. THQs of 586 samples and four drugs were above 1. We believe that the health risk of Hg, Pb and As in Chinese patent medicines with dosage forms of pill, capsule, tablet and powder, especially those in raw powder preparations, warrant concern.
RESUMEN
Inductively coupled plasma mass spectrometry (ICP-MS) was used to determine the content of cadmium (Cd) and arsenic (As) in earthworms. A physiologically-based extraction test (PBET) digestion in vitro /MDCK cell model was established to investigate the bioaccessibility of Cd and As in earthworms. The hazard index (HI) method and the margin of exposure (MOE) method were used to assess the risks of the total content and the bioaccessible content of Cd and As. The results showed that the total content of Cd and As in six batches of earthworms ranged from 8.319 to 33.606 mg·kg-1 and from 0.532 to 16.412 mg·kg-1, respectively. After uptake by MDCK cells, the bioaccessibility of Cd in earthworms ranged from 10.13% to 64.16%, and the bioaccessibility of As was from 2.72% to 46.57%. The results of risk assessment showed that before uptake by MDCK cells, the MOE values of As and HI values of Cd for all batches of earthworms were greater than 1, which suggests that the risks of As are acceptable but the risks of Cd are unacceptable. After transportation by MDCK cells, except for one batch of earthworms, the HI values of Cd in the other five batches were less than 1, which suggests that the risks are at a safe level. This study provides important technical support for a more objective and scientific assessment of the health risks of heavy metals in traditional Chinese medicines, and for a more scientific and reasonable standard limit of heavy metals.
RESUMEN
Evaporative light scattering detector(ELSD) and charged aerosol detector(CAD) methods were established in this study for the content determination of four kinds of sugars in Zhusheyong Yiqi Fumai(YQFM), and the factors affecting the accuracy of CAD methods were discussed. HPLC-ELSD chromatographic separation was performed on a Shodex Asahipak NH2 P-50 column with acetonitrile-water(75∶25)as the mobile phase, with a flow rate of 0.8 mL·min~(-1), drift tube temperature of 80 ℃. The analysis by HPLC-CAD was performed on the same column with acetonitrile-water as mobile phase for gradient elution, with a flow rate of 0.8 mL·min~(-1), a neb temperature of 45 ℃, and power function(PF) of 1.3. The samples of YQFM were detected by ELSD and CAD respectively. It was found that YQFM was composed of fructose, glucose, sucrose and maltose. The linear relationship of the two methods was good, and the recoveries, reproducibility and stability of these four kinds of sugars measured by the two methods satisfied the requirements of methodology. Both CAD and ELSD detectors were accurate and reliable in detecting saccharides components in YQFM. In addition, it was revealed in this study for the first time that the PF parameter of CAD had an important influence on the accuracy of sugar determination and acted as the key parameter of CAD method. It was also found that for CAD, a non-linear detector, there was no significant difference between the results of linear regression and logarithmic regression.