RESUMEN
Among breast cancer subtypes, triple-negative breast cancer stands out as the most aggressive, with patients facing a 40% mortality rate within the initial five years. The limited treatment options and unfavourable prognosis for triple-negative patients necessitate the development of novel therapeutic strategies. Photodynamic therapy (PDT) is an alternative treatment that can effectively target triple-negative neoplastic cells such as MDA-MB-231. In this in vitro study, we conducted a comparative analysis of the PDT killing rate of unbound Rose Bengal (RB) in solution versus RB-encapsulated chitosan nanoparticles to determine the most effective approach for inducing cytotoxicity at low laser powers (90 mW, 50 mW, 25 mW and 10 mW) and RB concentrations (50 µg/mL, 25 µg/mL, 10 µg/mL and 5 µg/mL). Intracellular singlet oxygen production and cell uptake were also determined for both treatment modalities. Dark toxicity was also assessed for normal breast cells. Despite the low laser power and concentration of nanoparticles (10 mW and 5 µg/mL), MDA-MB-231 cells experienced a substantial reduction in viability (8 ± 1%) compared to those treated with RB solution (38 ± 10%). RB nanoparticles demonstrated higher singlet oxygen production and greater uptake by cancer cells than RB solutions. Moreover, RB nanoparticles display strong cytocompatibility with normal breast cells (MCF-10A). The low activation threshold may be a crucial advantage for specifically targeting malignant cells in deep tissues.
Asunto(s)
Fotoquimioterapia , Neoplasias de la Mama Triple Negativas , Humanos , Neoplasias de la Mama Triple Negativas/tratamiento farmacológico , Neoplasias de la Mama Triple Negativas/patología , Rosa Bengala/farmacología , Rosa Bengala/uso terapéutico , Oxígeno Singlete , Línea Celular Tumoral , Fármacos Fotosensibilizantes/farmacología , Fármacos Fotosensibilizantes/uso terapéuticoRESUMEN
This study uses 35Cl and 14N solid-state NMR (SSNMR) spectroscopy and dispersion-corrected plane-wave density functional theory (DFT) calculations for the structural characterization of chloride salts of nutraceuticals in their bulk and dosage forms. For eight nutraceuticals, we measure the 35Cl EFG tensor parameters of the chloride ions and use plane-wave DFT calculations to elucidate relationships between NMR parameters and molecular-level structure, which provide rapid NMR crystallographic assessments of structural features. We employ both 35Cl direct excitation and 1Hâ35Cl cross-polarization methods to characterize a dosage form containing α-d-glucosamine HCl, observe possible impurity and/or adulterant phases, and quantify the weight percent of the active ingredient. To complement this, we also investigate 14N SSNMR spectroscopy and DFT calculations to characterize nitrogen atoms in the nutraceuticals. This includes a discussion of targeted acquisition experimental protocols (i.e., acquiring a select region of the overall pattern that features key discontinuities) that allow ultrawideline spectra to be acquired rapidly, even for unreceptive samples (i.e., those with long values of T1(14N), short values of T2eff(14N), or very broad patterns). It is hoped that these experimental and computational protocols will be useful for the characterization of various solid forms of nutraceuticals (i.e., salts, polymorphs, hydrates, solvates, cocrystals, amorphous solid dispersions, etc.), help detect impurity and counterfeit solid phases in dosage forms, and serve as a foundation for future NMR crystallographic studies of nutraceutical solid forms, including studies using ab initio crystal structure prediction algorithms.
Asunto(s)
Cloruros , Suplementos Dietéticos , Cloruros/química , Teoría Funcional de la Densidad , Espectroscopía de Resonancia Magnética/métodos , Estructura MolecularRESUMEN
Organophosphates (OPs) are used worldwide as pesticides. However, acute and chronic exposure to OPs can cause serious adverse health effects. The mechanism of delayed OP toxicity is thought to involve off-target inhibition of serine proteases, although the precise molecular details remain unclear owing to the lack of an analytical method for global detection of protein targets of OPs. Here, we report the development of a mass spectrometry method to identify OP-adducted proteins from complex mixtures in a nontargeted manner. Human plasma was incubated with the OP dichlorvos that was 50% isotopically labeled and 50% unlabeled. Proteins and protein adducts were extracted, digested, and analyzed by liquid chromatography-tandem mass spectrometry (LC-MS/MS) to detect "twin ions" of peptides that were covalently modified by a chemical reaction with dichlorvos. The LC-MS/MS data were processed by a blended data analytics software (Xenophile) to detect the amino acid residue sites of proteins that were covalently modified by exposure to OPs. We discovered that OPs can transmethylate the N, S, and O side chains of His, Cys, Glu, Asp, and Lys residues. For model systems, such transmethylation reactions were confirmed by LC-MS, nuclear magnetic resonance (NMR), and rationalized using electronic structure calculations. Methylation of the ubiquitous antioxidant glutathione by dichlorvos can decrease the reducing/oxidizing equilibrium of glutathione in liver extracts, which has been implicated in diseases and pathological conditions associated with delayed OP toxicity.
Asunto(s)
Proteínas Sanguíneas/química , Nitrógeno/química , Organofosfatos/química , Oxígeno/química , Azufre/química , Cromatografía Liquida , Humanos , Metilación , Organofosfatos/toxicidad , Espectrometría de Masas en TándemRESUMEN
Infections caused by drug-resistant pathogens are rapidly increasing in incidence and pose an urgent global health concern. New treatments are needed to address this critical situation while preventing further resistance acquired by the pathogens. One promising approach is antimicrobial photodynamic therapy (PDT), a technique that selectively damages pathogenic cells through reactive oxygen species (ROS) that have been deliberately produced by light-activated chemical reactions via a photosensitiser. There are currently some limitations to its wider deployment, including aggregation, hydrophobicity, and sub-optimal penetration capabilities of the photosensitiser, all of which decrease the production of ROS and lead to reduced therapeutic performance. In combination with nanoparticles, however, these challenges may be overcome. Their small size, functionalisable structure, and large contact surface allow a high degree of internalization by cellular membranes and tissue barriers. In this review, we first summarise the mechanism of PDT action and the interaction between nanoparticles and the cell membrane. We then introduce the categorisation of nanoparticles in PDT, acting as nanocarriers, photosensitising molecules, and transducers, in which we highlight their use against a range of bacterial and fungal pathogens. We also compare the antimicrobial efficiency of nanoparticles to unbound photosensitisers and examine the relevant safety considerations. Finally, we discuss the use of nanoparticulate drug delivery systems in clinical applications of antimicrobial PDT.
Asunto(s)
Nanopartículas , Fotoquimioterapia , Fármacos Fotosensibilizantes/farmacología , Fármacos Fotosensibilizantes/uso terapéutico , Especies Reactivas de OxígenoRESUMEN
This paper introduces an 1 H NMR method to identify individual divalent metal cations Be2+ , Mg2+ , Ca2+ , Sr2+ , Zn2+ , Cd2+ , Hg2+ , Sn2+ , and Pb2+ in aqueous salt solutions through their unique signal shift and coupling after complexation with the salt of ethylenediaminetetraacetic acid (EDTA). Furthermore, quantitative determination applied for the divalent metal cations Ca2+ , Mg2+ , Hg2+ , Sn2+ , Pb2+ , and Zn2+ (limit of quantification: 5-22 µg/ml) can be achieved using an excess of EDTA with aqueous model salt solutions. An internal standard is not required because a known excess of EDTA is added and the remaining free EDTA can be used to recalculate the quantity of chelated metal cations. The utility of the method is demonstrated for the analysis of divalent cations in some food supplements and in pharmaceutical products.
Asunto(s)
Quelantes/química , Suplementos Dietéticos/análisis , Ácido Edético/química , Metales Alcalinotérreos/análisis , Metales Pesados/análisis , Preparaciones Farmacéuticas/química , Cationes Bivalentes/análisis , Espectroscopía de Protones por Resonancia Magnética , Sales (Química)/química , SolucionesRESUMEN
L-3,4-dihydroxyphenylalanine (L-DOPA) is a naturally occurring catechol that is known to increase the adhesive strength of various materials used for tissue repair. With the aim of fortifying a porous and erodible chitosan-based adhesive film, L-DOPA was incorporated in its fabrication for stronger photochemical tissue bonding (PTB), a repair technique that uses light and a photosensitiser to promote tissue adhesion. The results showed that L-DOPA did indeed increase the tissue bonding strength of the films when photoactivated by a green LED, with a maximum strength recorded of approximately 30â¯kPa, 1.4 times higher than in its absence. The addition of L-DOPA also did not appreciably change the swelling, mechanical and erodible properties of the film. This study showed that strong, porous and erodible adhesive films for PTB made from biocompatible materials can be obtained through a simple inclusion of a natural additive such as L-DOPA, which was simply mixed with chitosan without any chemical modifications. In vitro studies using human fibroblasts showed no negative effect on cell proliferation indicating that these films are biocompatible. The films are convenient for various surgical applications as they can provide strong tissue support and a microporous environment for cellular infusion without the use of sutures. STATEMENT OF SIGNIFICANCE: Tissue adhesives are not as strong as sutures on wounds under stress. Our group has previously demonstrated that strong sutureless tissue repair can be realised with chitosan-based adhesive films that photochemically bond to tissue when irradiated with green light. The advantage of this technique is that films are easier to handle than glues and sutures, and their crosslinking reactions can be controlled with light. However, these films are not optimal for high-tension tissue regenerative applications because of their non-porous structure, which cannot facilitate cell and nutrient exchange at the wound site. The present study resolves this issue, as we obtained a strong and porous photoactivated chitosan-based adhesive film, by simply using freeze drying and adding L-DOPA.
Asunto(s)
Quitosano/farmacología , Dihidroxifenilalanina/farmacología , Procesos Fotoquímicos , Adhesivos Tisulares/farmacología , Animales , Materiales Biocompatibles/farmacología , Supervivencia Celular/efectos de los fármacos , Módulo de Elasticidad , Fibroblastos/efectos de los fármacos , Humanos , Oxidación-Reducción , Porosidad , Ovinos , Resistencia a la TracciónRESUMEN
Ultrasound has been investigated as a new technique for brewing coffee. A two-level factorial experimental design was conducted to identify the effects of ultra-sonication on the extraction of coffee components during ultrasonically-assisted coffee brewing. Different brews were produced by aqueous extraction from roasted ground coffee beans with sonication, and without it as a control, by varying coffee concentration (5% and 10% w/w), temperature (25 and 50⯰C) and sonication time (1 and 5â¯min). These brews were tested for antioxidant capacity (using the ABTS assay), caffeine and triglycerides (using quantitative NMR spectroscopy) and specific aroma/flavour volatiles (using headspace SPME-GC-MS). Additional observations of colour, foaming, body and flavour were also reported. Ultrasound was found to significantly increase the extraction of caffeine, triglycerides and several of the key volatile compounds from coffee, although it did appear to decrease the concentration of antioxidants over the controls, especially with longer time and higher temperature. Furthermore, all the sonicated samples exhibited a lighter caramel colour and lower foam formation which were attributed to their higher triglyceride content. The increased concentration of triglycerides and volatiles were by far the most outstanding responses.
RESUMEN
Understanding the nature of the drug-polymer interactions in micellar drug delivery systems and what happens with the drug and the polymer once the complex has formed is essential for the rational design of the polymeric matrices suitable for a particular drug. In this work, glycopolymeric vesicles-a block copolymer, poly(1-O-methacryloyl-ß-d-fructopyranose)-b-poly(methyl methacrylate), (PFru36-PMMA160),-designed to target tumor cells loaded with two drugs, ellipticine and curcumin, were characterized. Advanced solid-state NMR spectroscopy and single-crystal/powder X-ray diffraction (XRD) combined with CASTEP calculations shed light on the nature of the drug, the polymer, and their interactions. While the low drug loading (ca. 5%) ensured that the structure, size, and shape of the polymeric vesicles did not change significantly, the solid-state forms of the drugs changed markedly. Upon loading into the vesicles, ellipticine favored a highly ordered form distinctly different from the bulk drug as indicated by 13C solid-state NMR spectroscopy. A detailed analysis of the CASTEP-calculated 13C spectra derived from crystallographic data based on the lowest mean absolute error showed the best match with form I. Moreover, ellipticine before loading was found as a new polymorph and was described by single-crystal XRD as a new orthorhombic Form III. Likewise, curcumin, originally present in monoclinic Form I was found to recrystallize as metastable orthorhombic Form II inside the vesicles. Intermolecular interactions between the polymeric vesicles and the drugs, ellipticine as well as curcumin, were detected using 2D 1H magic angle spinning experiments, indicating that the drugs are localized in the hydrophobic layer of the vesicles.
Asunto(s)
Antineoplásicos/química , Curcumina/química , Portadores de Fármacos/química , Glicoconjugados/química , Resonancia Magnética Nuclear Biomolecular , Interacciones Hidrofóbicas e HidrofílicasRESUMEN
DNP solid state NMR spectroscopy allows non-targeted analysis of wild spider silk in unprecedented detail at natural abundance, revealing hitherto unreported features across several species. A >50-fold signal enhancement for each silk, enables the detection of novel H-bonding networks and arginine conformations, and the post-translational modified amino acid, hydroxyproline.
Asunto(s)
Fibroínas/química , Arañas/química , Animales , Espectroscopía de Resonancia Magnética con Carbono-13 , Enlace de Hidrógeno , Hidroxiprolina/química , Isótopos de Nitrógeno , Conformación Proteica en Lámina betaRESUMEN
In nature, self-assembly processes based on amphiphilic molecules play an integral part in the design of structures of higher order such as cells. Among them, amphiphilic glycoproteins or glycolipids take on a pivotal role due to their bioactivity. Here we show that sugars, in particular, fructose, are capable of directing the self-assembly of highly insoluble curcumin resulting in the formation of well-defined capsules based on non-covalent forces. Simply by mixing an aqueous solution of fructose and curcumin in an open vessel leads to the generation of capsules with sizes ranging between 100 and 150 nm independent of the initial concentrations used. Our results demonstrate that hydrogen bonding displayed by fructose can induce the self-assembly of hydrophobic molecules such as curcumin into well-ordered structures, and serving as a simple and virtually instantaneous way of making nanoparticles from curcumin in water with the potential for template polymerization and nanocarriers.
Asunto(s)
Curcumina/química , Nanopartículas/química , Azúcares/química , Portadores de Fármacos/química , Fructosa/química , Enlace de Hidrógeno , Interacciones Hidrofóbicas e HidrofílicasRESUMEN
Fire-derived organic matter, often referred to as pyrogenic organic matter (PyOM), is present in the Earth's soil, sediment, atmosphere, and water. We investigated interactions of PyOM with ammonia (NH3) gas, which makes up much of the Earth's reactive nitrogen (N) pool. Here we show that PyOM's NH3 retention capacity under ambient conditions can exceed 180 mg N g-1 PyOM-carbon, resulting in a material with a higher N content than any unprocessed plant material and most animal manures. As PyOM is weathered, NH3 retention increases sixfold, with more than half of the N retained through chemisorption rather than physisorption. Near-edge X-ray absorption fine structure and nuclear magnetic resonance spectroscopy reveal that a variety of covalent bonds form between NH3-N and PyOM, more than 10% of which contained heterocyclic structures. We estimate that through these mechanisms soil PyOM stocks could retain more than 600-fold annual NH3 emissions from agriculture, exerting an important control on global N cycling.
RESUMEN
Compact self-assembled monolayers (SAMs) of perfluorododecyl iodide (I-PFC12) of reproducible thickness (1.2 nm) are shown to form on silicon wafers. The SAMs have a high fluorine content (95%) and convey an extremely low surface energy to the silicon wafers (4.3 mN m-1), lower than previously reported in the literature for perfluorinated monolayers, and stable for over eight weeks. Shorter chain iodo-perfluorinated (I-PFC8) or bromo-perfluorinated molecules (Br-PFC10) led to less dense layers. The monolayers are stable to heating up to 60 °C, with some loss up to 150 °C. The I-PFC12 monolayer increases the work function of silicon wafers from 3.6 V to 4.4 eV, a factor that could be gainfully used in photovoltaic applications. The I-PFC12 monolayers can be transferred into patterns onto silica substrates by micro-contact printing. The NMR data and the reproducible thickness point to an upright halogen bonding interaction between the iodine in I-PFC12 and the surface oxygen on the native silica layer.
RESUMEN
Asphaltene adsorption on solid surfaces is a standing problem in petroleum industry. It has an adverse effect on reservoir production and development by changing rock wettability, plugging pore throats, and affects oil transport through pipelines. Asphaltene chemistry constitutes important part of the ageing process as part of petrophysical studies and core analysis. The mechanisms and contribution of various oil components to adsorption processes is not fully understood. To investigate the kinetics of the ageing process and address the relative contribution of different oil components, we prepared three sets of sandstone core plugs aged in different oil mixtures over various time intervals. Cores were then re-saturated with decane to evaluate their wetting state using low-field NMR relaxometry by monitoring a change of surface relaxivity. Adsorbed deposits were then extracted from cores for solution-state NMR analysis. Their 1H and 1H-13C correlation spectra obtained using heteronuclear single quantum coherence (HSQC) technique were matched to spectra of four SARA (saturates, aromatics, resins and asphaltenes) components of oil mixtures to deduce components of deposits and inter-component interactions. We notice that wettability reversal of rock is inversely proportional to initial asphaltene concentration. Analysis of deposits reveals an increase in their aliphatic content over ageing time, which is accompanied by a change of the morphology of the pore space due to cluster aggregates forming a network. Results suggest that the ageing process in respect to the wetting state of rock samples consists of three distinctive stages: (i) an early-time period, when the fraction of most polar asphaltenes creates a discontinuous layer corresponding to mixed-wet state; (ii) an intermediate-time interval, at which the full grain coverage may be achieved (at favourable chemical environment) corresponding to strong oil-wetting; (iii) a late-time stage, where intense macro-aggregates accumulation occurs, changing the pore space integrity. It is likely asphaltene-aliphatic interactions leading to growth of sub-micron size macro-aggregates.
Asunto(s)
Silicatos de Aluminio/química , Caolín/química , Imagen por Resonancia Magnética/métodos , Espectroscopía de Resonancia Magnética/métodos , Hidrocarburos Policíclicos Aromáticos/química , Compuestos de Potasio/química , Cuarzo/química , Adsorción , Alcanos , Gases , Cinética , Microscopía Electrónica de Rastreo , Permeabilidad , Porosidad , Propiedades de Superficie , Humectabilidad , Microtomografía por Rayos XRESUMEN
Correction for 'The value of universally available raw NMR data for transparency, reproducibility, and integrity in natural product research' by James B. McAlpine et al., Nat. Prod. Rep., 2018, DOI: .
RESUMEN
Covering: up to 2018With contributions from the global natural product (NP) research community, and continuing the Raw Data Initiative, this review collects a comprehensive demonstration of the immense scientific value of disseminating raw nuclear magnetic resonance (NMR) data, independently of, and in parallel with, classical publishing outlets. A comprehensive compilation of historic to present-day cases as well as contemporary and future applications show that addressing the urgent need for a repository of publicly accessible raw NMR data has the potential to transform natural products (NPs) and associated fields of chemical and biomedical research. The call for advancing open sharing mechanisms for raw data is intended to enhance the transparency of experimental protocols, augment the reproducibility of reported outcomes, including biological studies, become a regular component of responsible research, and thereby enrich the integrity of NP research and related fields.
Asunto(s)
Productos Biológicos/química , Espectroscopía de Resonancia Magnética/métodos , Conformación Molecular , Reproducibilidad de los ResultadosRESUMEN
Metal-free polymeric carbon nitrides (PCNs) are promising photocatalysts for solar hydrogen production, but their structure-photoactivity relationship remains elusive. Two PCNs were characterized by dynamic-nuclear-polarization-enhanced solid-state NMR spectroscopy, which circumvented the need for specific labeling with either 13 C- or 15 N-enriched precursors. Rapid 1D and 2D data acquisition was possible, providing insights into the structural contrasts between the PCNs. Compared to PCN_B with lower performance, PCN_P is a more porous and more active photocatalyst that is richer in terminal N-H bonds not associated with interpolymer chains. It is proposed that terminal N-H groups act as efficient carrier traps and reaction sites.
RESUMEN
PbS submicron crystals were formed by thermolysis of two different lead dithiocarbamate complexes. These precursors were readily synthesized and fully characterized, and in situ synchrotron powder diffraction experiments were performed to characterize their decomposition. The structure and purity of resultant PbS was examined using scanning electron and transmission electron microscopies, powder X-ray diffraction, and infrared spectroscopy. Submicron crystalline PbS was used to create a new PbS thermistor with excellent sensitivity and an ultrarapid thermal response time.
RESUMEN
This paper reports the CO2 electroreduction properties of three bis-bromo Co(iii) salen metal complexes and their Porous Organic Polymers (POPs) as a platform for using the salen core as a multi-electron reducing agent. Although Co(iii) salen metal complexes have been studied extensively for their chemical catalysis with CO2, their electrochemical behaviour, particularly their reduction, in the presence of CO2 is much less explored. The discrete Co(iii) complexes enabled the reduction of CO2 to CO in faradaic efficiencies of up to 20%. The reductive electrochemical processes of Co(iii) salen complexes are relatively unknown; therefore, the mechanism of reduction for the complexes was investigated using IR and UV-Vis-NIR spectroelectrochemical (SEC) techniques. The discrete bis-bromo salen complexes were incorporated into POPs with tris-(p-ethynyl)-triphenylamine as a co-ligand and were characterised using solid state NMR, IR, UV-Vis-NIR and Field Emission Scanning Electron Microscopy (FE-SEM). The POP materials were electrophoretically deposited onto glassy carbon under milder conditions than those previously reported in the literature. Direct attachment of the POP materials to glassy carbon enabled improved solid state electrochemical analysis of the samples. The POP materials were also analysed via SEC techniques, where a Co(ii/i) process could be observed, but further reductions associated with the imine reduction compromised the stability of the POPs.
RESUMEN
Tertiary phosphines remain widely utilized in synthesis, most notably as supporting ligands in metal complexes. A series of triarylphosphines bearing one to three hexa-peri-hexabenzocoronene (HBC) substituents has been prepared by an efficient divergent route. These "superphenylphosphines", P{HBC(t-Bu)5}nPh3-n (n = 1-3), form the palladium complexes PdCl2L2 and Pd2Cl4L2 where the isomer distribution in solution is dependent on the number of HBC substituents. The crystalline structures of five complexes all show intramolecular π-stacking between HBC-phosphines to form a supramolecular bidentate-like ligand that distorts the metal coordination geometry. When n = 2 or 3, the additional HBC substituents engage in intermolecular π-stacking to assemble the complexes into continuous ribbons or sheets. The phosphines adopt HBC's characteristics including strong optical absorption, green emission, and redox activity.
RESUMEN
High resolution NMR spectroscopy offers a large number of data points that enable close peaks to be resolved. Data processing algorithms, however, have not yet been able to capitalize on this offering to achieve the highest permissible resolution. Although singular value decomposition (SVD) based methods such as matrix pencil (MPM) are theoretically able to achieve this, their onerous computational cost makes them impractical. In this work, we address this problem and propose a localized MPM method that we refer to as LocMaP, which is capable of delivering the promised high resolution while at the same time taking advantage of the computational efficiency of the FFT. We present the derivation of LocMaP and offer an efficient implementation of it. Evaluation using both Monte Carlo runs and a simulated FID establish the great potential of the proposed method.