RESUMEN
Passive imaging for mid-wave infrared (MWIR) is resistant to atmospheric pollutants, guaranteeing image clarity and accuracy. Arrayed photodetectors can simultaneously perform radiation sensing to improve efficiency. Room temperature van der Waals (vdWs) photodetectors without lattice matching have evolved rapidly with optimized stacking methods, primarily for single-pixel devices. The urgent need to implement arrayed devices aligns with practical demands. Here, we present an 8 by 1 black phosphorus/molybdenum sulfide (BP/MoS2) vdWs photodetector linear array with a fill-factor of ~77%, fabricated using a temperature-assisted sloping transfer method. The flat interface and uniform thickness facilitate carrier transport and minimize pixel nonuniformities, showing an average peak detectivity (D*) of 2.34 × 109 cm·Hz1/2·W-1 in the mid-wave infrared region. Compared to a single pixel, push-broom scanning passive imaging is eight times more efficient and further enhanced through mean filtering and fast Fourier transform filtering for strip noise correction. Our study offers guidance on vdWs arrayed devices for engineering applications.
RESUMEN
Acquiring multi-dimensional optical information, such as intensity, spectrum, polarization, and phase, can significantly enhance the performance of photodetectors. Incorporating these dimensions allows for improved image contrast, enhanced recognition capabilities, reduced interference, and better adaptation to complex environments. However, the challenge lies in obtaining these dimensions on a single photodetector. Here we propose a misaligned unipolar barrier photodetector based on van der Waals heterojunction to address this issue. This structure enables spectral detection by switching between two absorbing layers with different cut-off wavelengths for dual-band detection. For polarization detection, anisotropic semiconductors like black phosphorus and black arsenic phosphorus inherently possess polarization-detection capabilities without additional complex elements. By manipulating the crystal direction of these materials during heterojunction fabrication, the device becomes sensitive to incident light at different polarization angles. This research showcases the potential of the misaligned unipolar barrier photodetector in capturing multi-dimensional optical information, paving the way for next-generation photodetectors.
RESUMEN
Cutting-edge mid-wavelength infrared (MWIR) sensing technologies leverage infrared photodetectors, memory units, and computing units to enhance machine vision. Real-time processing and decision-making challenges emerge with the increasing number of intelligent pixels. However, current operations are limited to in-sensor computing capabilities for near-infrared technology, and high-performance MWIR detectors for multi-state switching functions are lacking. Here, we demonstrate a non-volatile MoS2/black phosphorus (BP) heterojunction MWIR photovoltaic detector featuring a semi-floating gate structure design, integrating near- to mid-infrared photodetection, memory and computing (PMC) functionalities. The PMC device exhibits the property of being able to store a stable responsivity, which varies linearly with the stored conductance state. Significantly, device weights (stable responsivity) can be programmed with power consumption as low as 1.8 fJ, and the blackbody peak responsivity can reach 1.68 A/W for the MWIR band. In the simulation of Faster Region with convolution neural network (CNN) based on the FLIR dataset, the PMC hardware responsivity weights can reach 89% mean Average Precision index of the feature extraction network software weights. This MWIR photovoltaic detector, with its versatile functionalities, holds significant promise for applications in advanced infrared object detection and recognition systems.
RESUMEN
Er doped Si light-emitting diodes may find important applications in silicon photonics and optical quantum computing. These diodes exhibit an emission efficiency 2 orders of magnitude higher at reverse bias than forward bias due to impact excitation. However, physics of impact excitation in these devices remains largely unexplored. In this work, we fabricated an Er/O/B codoped Si light-emitting diode which exhibits a strong electroluminescence by the impact excitation of electrons inelastically colliding the Er ions. An analytical impact-excitation theory was established to predict the electroluminescence intensity and internal quantum efficiency which fit well with the experimental data. From the fittings, we find that the excitable Er ions reach a record concentration of 1.8×10^{19} cm^{-3} and up to 45% of them is in an excitation state by impact excitation. This work has important implications for developing efficient classical and quantum light sources based on rare earth elements in semiconductors.
RESUMEN
Multiplexing technology creates several orthogonal data channels and dimensions for high-density information encoding and is irreplaceable in large-capacity information storage, and communication, etc. The multiplexing dimensions are constructed by light attributes and spatial dimensions. However, limited by the degree of freedom of interaction between light and material structure parameters, the multiplexing dimension exploitation method is still confused. Herein, a 7D Spin-multiplexing technique is proposed. Spin structures with four independent attributes (color center type, spin axis, spatial distribution, and dipole direction) are constructed as coding basic units. Based on the four independent spin physical effects, the corresponding photoluminescence wavelength, magnetic field, microwave, and polarization are created into four orthogonal multiplexing dimensions. Combined with the 3D of space, a 7D multiplexing method is established, which possesses the highest dimension number compared with 6 dimensions in the previous study. The basic spin unit is prepared by a self-developed laser-induced manufacturing process. The free state information of spin is read out by four physical quantities. Based on the multiple dimensions, the information is highly dynamically multiplexed to enhance information storage efficiency. Moreover, the high-dynamic in situ image encryption/marking is demonstrated. It implies a new paradigm for ultra-high-capacity storage and real-time encryption.
RESUMEN
This review explores the growing interest in 2D layered materials, such as graphene, h-BN, transition metal dichalcogenides (TMDs), and black phosphorus (BP), with a specific focus on recent advances in strain engineering. Both experimental and theoretical results are delved into, highlighting the potential of strain to modulate physical properties, thereby enhancing device performance. Various strain engineering methods are summarized, and the impact of strain on the electrical, optical, magnetic, thermal, and valleytronic properties of 2D materials is thoroughly examined. Finally, the review concludes by addressing potential applications and challenges in utilizing strain engineering for functional devices, offering valuable insights for further research and applications in optoelectronics, thermionics, and spintronics.
RESUMEN
Avalanche or carrier-multiplication effect, based on impact ionization processes in semiconductors, has a great potential for enhancing the performance of photodetector and solar cells. However, in practical applications, it suffers from high threshold energy, reducing the advantages of carrier multiplication. Here, we report on a low-threshold avalanche effect in a stepwise WSe2 structure, in which the combination of weak electron-phonon scattering and high electric fields leads to a low-loss carrier acceleration and multiplication. Owing to this effect, the room-temperature threshold energy approaches the fundamental limit, Ethre ≈ Eg, where Eg is the bandgap of the semiconductor. Our findings offer an alternative perspective on the design and fabrication of future avalanche and hot-carrier photovoltaic devices.
RESUMEN
In-sensor processing has the potential to reduce the energy consumption and hardware complexity of motion detection and recognition. However, the state-of-the-art all-in-one array integration technologies with simultaneous broadband spectrum image capture (sensory), image memory (storage) and image processing (computation) functions are still insufficient. Here, macroscale (2 × 2 mm2) integration of a rippled-assisted optoelectronic array (18 × 18 pixels) for all-day motion detection and recognition. The rippled-assisted optoelectronic array exhibits remarkable uniformity in the memory window, optically stimulated non-volatile positive and negative photoconductance. Importantly, the array achieves an extensive optical storage dynamic range exceeding 106, and exceptionally high room-temperature mobility up to 406.7 cm2 V-1 s-1, four times higher than the International Roadmap for Device and Systems 2028 target. Additionally, the spectral range of each rippled-assisted optoelectronic processor covers visible to near-infrared (405 nm-940 nm), achieving function of motion detection and recognition.
RESUMEN
The barrier structure is designed to enhance the operating temperature of the infrared detector, thereby improving the efficiency of collecting photogenerated carriers and reducing dark current generation, without suppressing the photocurrent. However, the development of barrier detectors using conventional materials is limited due to the strict requirements for lattice and band matching. In this study, a high-performance unipolar barrier detector is designed utilizing a black arsenic phosphorus/molybdenum disulfide/black phosphorus van der Waals heterojunction. The device exhibits a broad response bandwidth ranging from visible light to mid-wave infrared (520 nm to 4.6 µm), with a blackbody detectivity of 2.7 × 1010 cmHz-1/2 W-1 in the mid-wave infrared range at room temperature. Moreover, the optical absorption anisotropy of black arsenic phosphorus enables polarization resolution detection, achieving a polarization extinction ratio of 35.5 at 4.6 µm. Mid-wave infrared imaging of the device is successfully demonstrated at room temperature, highlighting the significant potential of barrier devices based on van der Waals heterojunctions in mid-wave infrared detection.
RESUMEN
With the continuous advancement of nanofabrication techniques, development of novel materials, and discovery of useful manipulation mechanisms in high-performance applications, especially photodetectors, the morphology of junction devices and the way junction devices are used are fundamentally revolutionized. Simultaneously, new types of photodetectors that do not rely on any junction, providing a high signal-to-noise ratio and multidimensional modulation, have also emerged. This review outlines a unique category of material systems supporting novel junction devices for high-performance detection, namely, the van der Waals materials, and systematically discusses new trends in the development of various types of devices beyond junctions. This field is far from mature and there are numerous methods to measure and evaluate photodetectors. Therefore, it is also aimed to provide a solution from the perspective of applications in this review. Finally, based on the insight into the unique properties of the material systems and the underlying microscopic mechanisms, emerging trends in junction devices are discussed, a new morphology of photodetectors is proposed, and some potential innovative directions in the subject area are suggested.
RESUMEN
The vector characteristics of light and the vectorial transformations during its transmission lay a foundation for polarized photodetection of objects, which broadens the applications of related detectors in complex environments. With the breakthrough of low-dimensional materials (LDMs) in optics and electronics over the past few years, the combination of these novel LDMs and traditional working modes is expected to bring new development opportunities in this field. Here, the state-of-the-art progress of LDMs, as polarization-sensitive components in polarized photodetection and even the imaging, is the main focus, with emphasis on the relationship between traditional working principle of polarized photodetectors (PPs) and photoresponse mechanisms of LDMs. Particularly, from the view of constitutive equations, the existing works are reorganized, reclassified, and reviewed. Perspectives on the opportunities and challenges are also discussed. It is hoped that this work can provide a more general overview in the use of LDMs in this field, sorting out the way of related devices for "more than Moore" or even the "beyond Moore" research.
RESUMEN
Modulating anisotropic phonon polaritons (PhPs) can open new avenues in infrared nanophotonics. Promising PhP dispersion engineering through polariton hybridization has been demonstrated by coupling gated graphene to single-layer α-MoO3. However, the mechanism underlying the gate-dependent modulation of hybridization has remained elusive. Here, using IR nanospectroscopic imaging, we demonstrate active modulation of the optical response function, quantified in measurements of gate dependence of wavelength, amplitude, and dissipation rate of the hybrid plasmon-phonon polaritons (HPPPs) in both single-layer and twisted bilayer α-MoO3/graphene heterostructures. Intriguingly, while graphene doping leads to a monotonic increase in HPPP wavelength, amplitude and dissipation rate show transition from an initially anticorrelated decrease to a correlated increase. We attribute this behavior to the intricate interplay of gate-dependent components of the HPPP complex momentum. Our results provide the foundation for active polariton control of integrated α-MoO3 nanophotonics devices.
RESUMEN
At the current stage of long-wavelength infrared (LWIR) detector technology development, the only commercially available detectors that operate at room temperature are thermal detectors. However, the efficiency of thermal detectors is modest: they exhibit a slow response time and are not very useful for multispectral detection. On the other hand, in order to reach better performance (higher detectivity, better response speed, and multispectral response), infrared (IR) photon detectors are used, requiring cryogenic cooling. This is a major obstacle to the wider use of IR technology. For this reason, significant efforts have been taken to increase the operating temperature, such as size, weight and power consumption (SWaP) reductions, resulting in lower IR system costs. Currently, efforts are aimed at developing photon-based infrared detectors, with performance being limited by background radiation noise. These requirements are formalized in the Law 19 standard for P-i-N HgCdTe photodiodes. In addition to typical semiconductor materials such as HgCdTe and type-II AIIIBV superlattices, new generations of materials (two-dimensional (2D) materials and colloidal quantum dots (CQDs)) distinguished by the physical properties required for infrared detection are being considered for future high-operating-temperature (HOT) IR devices. Based on the dark current density, responsivity and detectivity considerations, an attempt is made to determine the development of a next-gen IR photodetector in the near future.
RESUMEN
Avalanche photodiodes (APDs) have drawn huge interest in recent years and have been extensively used in a range of fields including the most important one-optical communication systems due to their time responses and high sensitivities. This article shows the evolution and the recent development of AIIIBV, AIIBVI, and potential alternatives to formerly mentioned-"third wave" superlattices (SL) and two-dimensional (2D) materials infrared (IR) APDs. In the beginning, the APDs fundamental operating principle is demonstrated together with progress in architecture. It is shown that the APDs evolution has moved the device's performance towards higher bandwidths, lower noise, and higher gain-bandwidth products. The material properties to reach both high gain and low excess noise for devices operating in different wavelength ranges were also considered showing the future progress and the research direction. More attention was paid to advances in AIIIBV APDs, such as AlInAsSb, which may be used in future optical communications, type-II superlattice (T2SLs, "Ga-based" and "Ga-free"), and 2D materials-based IR APDs. The latter-atomically thin 2D materials exhibit huge potential in APDs and could be considered as an alternative material to the well-known, sophisticated, and developed AIIIBV APD technologies to include single-photon detection mode. That is related to the fact that conventional bulk materials APDs' performance is restricted by reasonably high dark currents. One approach to resolve that problem seems to be implementing low-dimensional materials and structures as the APDs' active regions. The Schottky barrier and atomic level thicknesses lead to the 2D APD dark current significant suppression. What is more, APDs can operate within visible (VIS), near-infrared (NIR)/mid-wavelength infrared range (MWIR), with a responsivity ~80 A/W, external quantum efficiency ~24.8%, gain ~105 for MWIR [wavelength, λ = 4 µm, temperature, T = 10-180 K, Black Phosphorous (BP)/InSe APD]. It is believed that the 2D APD could prove themselves to be an alternative providing a viable method for device fabrication with simultaneous high-performance-sensitivity and low excess noise.
RESUMEN
The neural network image sensor-which mimics neurobiological functions of the human retina-has recently been demonstrated to simultaneously sense and process optical images. However, highly tunable responsivity concurrent with non-volatile storage of image data in the neural network would allow a transformative leap in compactness and function of these artificial neural networks. Here, we demonstrate a reconfigurable and non-volatile neuromorphic device based on two-dimensional semiconducting metal sulfides that is concurrently a photovoltaic detector. The device is based on a metal-semiconductor-metal (MSM) two-terminal structure with pulse-tunable sulfur vacancies at the M-S junctions. By modulating sulfur vacancy concentrations, the polarities of short-circuit photocurrent can be changed with multiple stable magnitudes. The bias-induced motion of sulfur vacancies leads to highly reconfigurable responsivities by dynamically modulating the Schottky barriers. A convolutional neuromorphic network is finally designed for image processing and object detection using the same device. The results demonstrated that neuromorphic photodetectors can be the key components of visual perception hardware.
RESUMEN
Filterless light-ellipticity-sensitive optoelectronic response generally has low discrimination, thus severely hindering the development of monolithic polarization detectors. Here, we achieve a breakthrough based on a configurable circular-polarization-dependent optoelectronic silent state created by the superposition of two photoresponses with enantiomerically opposite ellipticity dependences. The zero photocurrent and the significantly suppressed noise of the optoelectronic silent state singularly enhance the circular polarization extinction ratio (CPER) and the sensitivity to light ellipticity perturbation. The CPER of our device approaches infinity by the traditional definition. The newly established CPER taking noise into account is 3-4 orders of magnitude higher than those of ordinary integrated circular polarization detectors, and it remains high in an expanded wavelength range. The noise equivalent light ellipticity difference goes below 0.009° Hz-1/2 at modulation frequencies above 1000 Hz by a light power of 281 µW. This scheme brings a leap in developing monolithic ultracompact circular polarization detectors.
RESUMEN
Quasar-driven outflows on galactic scales are a routinely invoked ingredient for galaxy formation models. We report the discovery of ionized gas nebulae surrounding three luminous red quasars at z ~ 0.4 from Gemini integral field unit observations. All these nebulae feature unprecedented pairs of "superbubbles" extending ~20 kpc in diameter, and the line-of-sight velocity difference between the red- and blueshifted bubbles reaches up to ~1200 km/s. Their spectacular dual-bubble morphology (in analogy to the galactic "Fermi bubbles") and their kinematics provide unambiguous evidence for galaxy-wide quasar-driven outflows, in parallel with the quasi-spherical outflows similar in size from luminous type 1 and type 2 quasars at concordant redshift. These bubble pairs manifest themselves as a signpost of the short-lived superbubble "break-out" phase, when the quasar wind drives the bubbles to escape the confinement from the dense environment and plunge into the galactic halo with a high-velocity expansion.
RESUMEN
Different from hexagonal boron nitride (hBN) sheets, the bandgap of hBN nanoribbons (BNNRs) can be changed by spatial/electrostatic confinement. It is predicted that a transverse electric field can narrow the bandgap and even cause an insulator-metal transition in BNNRs. However, experimentally introducing an overhigh electric field across the BNNR remains challenging. Here, it is theoretically and experimentally demonstrated that water adsorption greatly reduces the bandgap of zigzag-oriented BNNRs (zBNNRs). Ab initio calculations show that water molecules can be favorably assembled within the trench between two adjacent BNNRs to form a polar ice layer, which induces a transverse equivalent electric field of over 2 V nm-1 accounting for the bandgap reduction. Field-effect transistors are successfully fabricated from zBNNRs with different widths. The conductance of water-adsorbed zBNNRs can be tuned over 3 orders in magnitude via modulation of the equivalent electrical field at room temperature. Furthermore, photocurrent response measurements are taken to determine the optical bandgaps of zBNNRs with water adsorption. The zBNNR with increased width can exhibit a bandgap down to 1.17 eV. This study offers fundamental insights into new routes toward realizing electronic/optoelectronic devices and circuits based on hexagonal boron nitride.
RESUMEN
Narrow-band photodetectors based on halide perovskite have recently attracted significant attention due to their exceptional narrow-band detection performance and tunable absorption peaks covering a wide optical range. In this work, we report mixed-halide CH3NH3PbClxBr3-xsingle crystal-based photodetectors have been fabricated, where the Cl/Br ratios were varied (3:0, 10:1, 5:1, 1:1, 1:7, 1:14 and 0:3). Vertical and parallel structures devices were fabricated which exhibited ultranarrow spectral responses under bottom illumination, with a full-width at half-maximum less than 16 nm. The observed performance can be ascribed to the unique carrier generation and extraction mechanisms within the single crystal under short and long wavelength of illumination. These findings offer valuable insights into the development of narrow-band photodetectors that do not necessitate the use of filters and hold tremendous potential for a diverse array of applications.