RESUMEN
ConspectusIn the development of 2D metal-organic frameworks (MOFs) and 2D covalent organic frameworks (COFs), obtaining structural details at the atomic level is crucial to understanding their properties and related mechanisms in potential applications. However, since 2D-MOFs and COFs are composed of layered structures and often exhibit sheet-like morphologies, it is challenging to grow large crystals suitable for single-crystal X-ray diffraction (SCXRD). Therefore, ab initio structure determination, which refers to solving the structure directly from experimental data without using any prior knowledge or computational input, is extremely rare for 2D-MOFs and COFs. In contrast to SCXRD, three-dimensional electron diffraction (3DED) only requires crystals sized in tens or hundreds of nanometers, making it an ideal method for single-crystal analysis of 2D-MOFs and COFs and obtaining their fine structural details.In this Account, we describe our recent development of the 3DED method and its application in structure determination and property studies of 2D-MOFs and COFs. A key development is the establishment of a continuous 3DED data collection protocol. By collecting electron diffraction (ED) patterns continuously while performing crystal tilting, the electron dose applied to the target nanocrystal is greatly reduced. This allows the acquisition of high-resolution 3DED data from 2D-MOFs and COFs by minimizing their damage under the electron beam. We have also developed an approach to couple 3DED with real-space structure solution methods, i.e., simulated annealing (SA), for single-crystal structural analysis of materials that do not have high crystallinity. We successfully determined two 2D-COF structures by combining 3DED with SA.We provide several examples demonstrating the application of 3DED for the ab initio structure determination of 2D-MOFs and COFs, revealing not only their in-plane structures but also their stacking modes at the atomic level. Notably, the obtained structural details serve as the foundation for further understanding the properties of 2D-MOFs and COFs, such as their electronic band structures, charge mobilities, etc. Beyond structure determination, we describe our work on using 3DED as a high-throughput method for the discovery of new materials. Using this approach, we discovered a novel MOF that was present only in trace amounts within a multiphasic mixture. Through this discovery, we were able to tune the synthesis conditions to obtain its pure phase.We detail how 3DED can be used to probe different levels of molecular motions in MOFs through the analysis of anisotropic displacement parameters (ADPs). Additionally, we show that 3DED can provide accurate information about intermolecular weak interactions such as hydrogen bonding and van der Waals (vdW) interactions. Our studies demonstrate that 3DED is a valuable method for the structural analysis of 2D-MOFs and COFs. We envision that 3DED can accelerate research in these fields by providing unambiguous structural models at the atomic level.
RESUMEN
Layer-stacking behaviors are crucial for two-dimensional covalent organic frameworks (2D COFs) to define their pore structure, physicochemical properties, and functional output. So far, fine control over the stacking mode without complex procedures remains a grand challenge. Herein, we proposed a "key-cylinder lock mimic" strategy to synthesize 2D COFs with a tunable layer-stacking mode by taking advantage of ionic liquids (ILs). The staggered (AB) stacking (unlocked) COFs were exclusively obtained by incorporating ILs of symmetric polarity and matching molecular size; otherwise, commonly reported eclipsed (AA) stacking (locked) COFs were observed instead. Mechanistic study revealed that AB stacking was induced by a confined interlocking effect (CIE) brought by anions and bulky cations of the ILs inside pores ("key" and "cylinder", respectively). Excitingly, this strategy can speed up production rate of crystalline powders (e.g., COF-TAPT-Tf@BmimTf2N in merely 30 minutes) under mild reaction conditions. This work highlights the enabling role of ILs to tailor the layer stacking of 2D COFs and promotes further exploration of their stacking mode-dependant applications.
RESUMEN
Carbon trading is one of the pivotal means of carbon emission reduction. Accurate prediction of carbon prices can stabilize the carbon market, mitigate investment risks, and promote green development. In this study, firstly, the IVMD and ICEEMDAN are used to decompose carbon price quadratically; secondly, the Dispersion entropy is used to identify the sequence frequency, and then the SOA-LSSVM model and TCN model are used to predict the high-frequency and low-frequency sequences, respectively; finally, the prediction results are integrated by SOA-GRU. As a result, the hybrid IVMD-ICEEMDAN-SOALSSVM/TCN-SOAGRU model was constructed. This framework consistently performs best under two carbon markets, the CEEX Guangzhou and the EU ETS, compared with 21 comparative models, with MAPEs of 0.42% and 0.83%, respectively. The main contributions are as follows: (1) A novel IVMD-ICEEMDAN secondary decomposition method is proposed, which improves the problem of poorly determining the value of the decomposition modal number K in the traditional VMD method and improves the efficiency of the carbon price sequence decomposition. (2) A hybrid forecasting model of LSSVM and TCN is proposed, effectively capturing the features of different sequences. (3) Optimization for LSSVM and GRU using SOA improves the stability and adaptability of the model. The article provides governments, enterprises, and investors with novel and effective carbon price forecasting tool.
Asunto(s)
Carbono , Predicción , Modelos Teóricos , ComercioRESUMEN
Engineering the building blocks in metal-organic materials is an effective strategy for tuning their dynamical properties and can affect their response to external guest molecules. Tailoring the interaction and diffusion of molecules into these structures is highly important, particularly for applications related to gas separation. Herein, we report a vanadium-based hybrid ultramicroporous material, VOFFIVE-1-Ni, with temperature-dependent dynamical properties and a strong affinity to effectively capture and separate carbon dioxide (CO2) from methane (CH4). VOFFIVE-1-Ni exhibits a CO2 uptake of 12.08 wt % (2.75 mmol g-1), a negligible CH4 uptake at 293 K (0.5 bar), and an excellent CO2-over-CH4 uptake ratio of 2280, far exceeding that of similar materials. The material also exhibits a favorable CO2 enthalpy of adsorption below -50 kJ mol-1, as well as fast CO2 adsorption rates (90% uptake reached within 20 s) that render the hydrolytically stable VOFFIVE-1-Ni a promising sorbent for applications such as biogas upgrading.
RESUMEN
This study aims to elucidate the key regulatory molecules, specifically messenger RNAs (mRNAs), long noncoding RNAs (lncRNAs), and microRNAs (miRNAs) and their roles in the development and progression of spinal cord injury (SCI). Expression profiles (GSE45006, GSE19890, and GSE125630) for SCI were sourced from the Gene Expression Omnibus (GEO) database. By comparing rats with SCI at various time points against those without SCI, we identified differentially expressed mRNAs (DEmRNAs), lncRNAs (DElncRNAs), and miRNAs (DEmiRNAs). The GSE45006 dataset facilitated the production of DEmRNAs, which were then clustered using Mfuzz. Subsequently, we constructed a protein-protein interaction (PPI) network and anticipated interaction pairs between miRNA-mRNA and lncRNA-mRNA. These pairs were instrumental in forming a regulatory network involving lncRNA-miRNA-mRNA interactions. Additionally, we conducted functional enrichment studies on the DEmRNAs within these gene networks. A total of 2313 DEmRNAs were identified using the GSE45006 dataset, alongside 111 DEmiRNAs from GSE19890. From GSE125630, we extracted 154 DElncRNAs and 2322 DEmRNAs. Our analysis revealed 294 up-regulated DEmRNAs, grouped into the up-cluster, and 407 down-regulated DEmRNAs, forming the down-cluster. Key hub genes in the PPI network, such as Rhof, Vav1, Lyz2, Rab3a, Lyn, Cyfip1, Gns, and Nckap1l, were identified. Additionally, the study successfully constructed a competing endogenous RNA (ceRNA) network, revealing 55 unique lncRNA-miRNA-mRNA link pairs. Our research established a ceRNA network associated with SCI, identifying several critical lncRNA-miRNA-mRNA connection pairs integral to the disease's onset and progression. Notably, significant associations, including the AABR07041411.1-miR-125a-5p-Slc4a7 and the Smg1-rno-miR-331-3p-Tlr4 pairs, were observed to exert a significant influence within this biological context.
RESUMEN
Two-dimensional metal-organic nanosheets (MONs) have emerged as attractive alternatives to their three-dimensional metal-organic framework (MOF) counterparts for heterogeneous catalysis due to their greater external surface areas and higher accessibility of catalytically active sites. Zr MONs are particularly prized because of their chemical stability and high Lewis and Brønsted acidities of the Zr clusters. Herein, we show that careful control over modulated self-assembly and exfoliation conditions allows the isolation of the first example of a two-dimensional nanosheet wherein Zr6 clusters are linked by dicarboxylate ligands. The hxl topology MOF, termed GUF-14 (GUF = Glasgow University Framework), can be exfoliated into monolayer thickness hns topology MONs, and acid-induced removal of capping modulator units yields MONs with enhanced catalytic activity toward the formation of imines and the hydrolysis of an organophosphate nerve agent mimic. The discovery of GUF-14 serves as a valuable example of the undiscovered MOF/MON structural diversity extant in established metal-ligand systems that can be accessed by harnessing the power of modulated self-assembly protocols.
RESUMEN
The charge-transfer (CT) interactions between organic compounds are reflected in the (opto)electronic properties. Determining and visualizing crystal structures of CT complexes are essential for the design of functional materials with desirable properties. Complexes of pyranine (PYR), methyl viologen (MV), and their derivatives are the most studied water-based CT complexes. Nevertheless, very few crystal structures of CT complexes have been reported so far. In this study, the structures of two PYRs-MVs CT crystals and a map of the noncovalent interactions using 3D electron diffraction (3DED) are reported. Physical properties, e.g., band structure, conductivity, and electronic spectra of the CT complexes and their crystals are investigated and compared with a range of methods, including solid and liquid state spectroscopies and highly accurate quantum chemical calculations based on density functional theory (DFT). The combination of 3DED, spectroscopy, and DFT calculation can provide important insight into the structure-property relationship of crystalline CT materials, especially for submicrometer-sized crystals.
RESUMEN
Perfluorooctanoic acid (PFOA) is an environmental contaminant ubiquitous in water resources, which as a xenobiotic and carcinogenic agent, severely endangers human health. The development of techniques for its efficient removal is therefore highly sought after. Herein, we demonstrate an unprecedented zirconium-based MOF (PCN-999) possessing Zr6 and biformate-bridged (Zr6)2 clusters simultaneously, which exhibits an exceptional PFOA uptake of 1089 mg/g (2.63 mmol/g), representing a ca. 50% increase over the previous record for MOFs. Single-crystal X-ray diffraction studies and computational analysis revealed that the (Zr6)2 clusters offer additional open coordination sites for hosting PFOA. The coordinated PFOAs further enhance the interaction between coordinated and free PFOAs for physical adsorption, boosting the adsorption capacity to an unparalleled high standard. Our findings represent a major step forward in the fundamental understanding of the MOF-based PFOA removal mechanism, paving the way toward the rational design of next-generation adsorbents for per- and polyfluoroalkyl substance (PFAS) removal.
RESUMEN
Oxygen reduction reaction (ORR) is of critical significance in the advancement of fuel cells and zinc-air batteries. The iron-nitrogen (Fe-Nx ) sites exhibited exceptional reactivity towards ORR. However, the task of designing and controlling the local structure of Fe species for high ORR activity and stability remains a challenge. Herein, we have achieved successful immobilization of Fe species onto the highly curved surface of S, N co-doped carbonaceous nanosprings (denoted as FeNS/Fe3 C@CNS). The induction of this twisted configuration within FeNS/Fe3 C@CNS arose from the assembly of chiral templates. For electrocatalytic ORR tests, FeNS/Fe3 C@CNS exhibits a half-wave potential (E1/2 ) of 0.91â V in alkaline medium and a E1/2 of 0.78â V in acidic medium. The Fe single atoms and Fe3 C nanoparticles are coexistent and play as active centers within FeNS/Fe3 C@CNS. The highly curved surface, coupled with S substitution in the coordination layer, served to reduce the energy barrier for ORR, thereby enhancing the intrinsic catalytic activity of the Fe single-atom sites. We also assembled a wearable flexible Zn-air battery using FeNS/Fe3 C@CNS as electrocatalysts. This work provides new insights into the construction of highly curved surfaces within carbon materials, offering high electrocatalytic efficacy and remarkable performance for flexible energy conversion devices.
RESUMEN
3D-oriented metal-organic framework (MOF) films and patterns have recently emerged as promising platforms for sensing and photonic applications. These oriented polycrystalline materials are typically prepared by heteroepitaxial growth from aligned inorganic nanostructures and display anisotropic functional properties, such as guest molecule alignment and polarized fluorescence. However, to identify suitable conditions for the integration of these 3D-oriented MOF superstructures into functional devices, the effect of water (gaseous and liquid) on different frameworks should be determined. We note that the hydrolytic stability of these heteroepitaxially grown MOF films is currently unexplored. In this work, we present an in-depth analysis of the structural evolution of aligned 2D and 3D Cu-based MOFs grown from Cu(OH)2 coatings. Specifically, 3D-oriented Cu2L2 and Cu2L2DABCO films (L = 1,4-benzenedicarboxylate, BDC; biphenyl-4,4-dicarboxylate, BPDC; DABCO = 1,4-diazabicyclo[2.2.2]octane) were exposed to 50% relative humidity (RH), 80% RH and liquid water. The combined use of X-ray diffraction, infrared spectroscopy, and scanning electron microscopy shows that the sensitivity towards humid environments critically depends on the presence of the DABCO pillar ligand. While oriented films of 2D MOF layers stay intact upon exposure to all levels of humidity, hydrolysis of Cu2L2DABCO is observed. In addition, we report that in environments with high water content, 3D-oriented Cu2(BDC)2DABCO recrystallizes as 3D-oriented Cu2(BDC)2. The heteroepitaxial MOF-to-MOF transformation mechanism was studied with in situ synchrotron experiments, time-resolved AFM measurements, and electron diffraction. These findings provide valuable information on the stability of oriented MOF films for their application in functional devices and highlight the potential for the fabrication of 3D-oriented superstructures via MOF-to-MOF transformations.
RESUMEN
Two-dimensional conjugated metal-organic frameworks (2D c-MOFs) have emerged as a new class of crystalline layered conducting materials that hold significant promise for applications in electronics and spintronics. However, current 2D c-MOFs are mainly made from organic planar ligands, whereas layered 2D c-MOFs constructed by curved or twisted ligands featuring novel orbital structures and electronic states remain less developed. Herein, we report a Cu-catecholate wavy 2D c-MOF (Cu3(HFcHBC)2) based on a fluorinated core-twisted contorted hexahydroxy-hexa-cata-hexabenzocoronene (HFcHBC) ligand. We show that the resulting film is composed of rod-like single crystals with lengths up to â¼4 µm. The crystal structure is resolved by high-resolution transmission electron microscopy (HRTEM) and continuous rotation electron diffraction (cRED), indicating a wavy honeycomb lattice with AA-eclipsed stacking. Cu3(HFcHBC)2 is predicted to be metallic based on theoretical calculation, while the crystalline film sample with numerous grain boundaries apparently exhibits semiconducting behavior at the macroscopic scale, characterized by obvious thermally activated conductivity. Temperature-dependent electrical conductivity measurements on the isolated single-crystal devices indeed demonstrate the metallic nature of Cu3(HFcHBC)2, with a very weak thermally activated transport behavior and a room-temperature conductivity of 5.2 S cm-1. Furthermore, the 2D c-MOFs can be utilized as potential electrode materials for energy storage, which display decent capacity (163.3 F g-1) and excellent cyclability in an aqueous 5 M LiCl electrolyte. Our work demonstrates that wavy 2D c-MOF using contorted ligands are capable of intrinsic metallic transport, marking the emergence of new conductive MOFs for electronic and energy applications.
RESUMEN
One-dimensional (1D) materials demonstrate anisotropic in-plane physical properties that enable a wide range of functionalities in electronics, photonics, valleytronics, optoelectronics, and catalysis. Here, we undertake an in-depth study of the growth mechanism for equimolar midentropy alloy of (NbTaTi)0.33S3 nanoribbons as a model system for 1D transition metal trichalcogenide structures. To understand the thermodynamic and kinetic effects in the growth process, the energetically preferred phases at different synthesis temperatures and times are investigated, and the phase evolution is inspected at a sequence of growth steps. It is uncovered that the dynamics of the growth process occurs at four different stages via preferential incorporation of chemical species at high-surface-energy facets. Also, a sequence of temperature and time dependent nonuniform to uniform phase evolutions has emerged in the composition and structure of (NbTaTi)0.33S3 which is described based on an anisotropic vapor-solid (V-S) mechanism. Furthermore, direct evidence for the 3D structure of the charge density wave (CDW) phase (width less than 100 nm) is provided by three-dimensional electron diffraction (3DED) in individual nanoribbons at cryogenic temperature, and detailed comparisons are made between the phases obtained before and after CDW transformation. This study provides important fundamental information for the design and synthesis of future 1D alloy structures.
RESUMEN
Medulloblastoma is one of the most frequent malignant brain tumors in infancy and childhood. Early diagnosis and treatment are quite crucial for the prognosis. However, the pathogenesis of medulloblastoma is still not completely clarified. High-resolution mass spectrometry has enabled a comprehensive investigation on the mechanism of disease from the perspective of metabolism. Herein, we compared the difference of metabolic profiles of serum between medulloblastoma (n = 33) and healthy control (HC, n = 16) by using UPLC-Q/E-MS/MS. Principal component analysis and orthogonal projections to latent structures discriminant analysis (OPLS-DA) intuitively revealed the significantly distinct metabolic profiles between medulloblastoma and HC (p < 0.01 for permutation test on OPLS-DA model). Total of 25 significantly changed metabolites were identified. ROC analysis reported that six of them (Phosphatidic acid (8:0/15:0), 3'-Sialyllactose, Isocoproporphyrin, Acetylspermidine, Fructoseglycine and 3-Hydroxydodecanedioate) showed high specificity and precision to be potential diagnosis biomarkers (AUC > 0.98). Functional analysis discovered that there are four pathways notably perturbed for medulloblastoma. These pathways are related with the dysfunction of arachidonic acid metabolism, steroid hormone biosynthesis, and folate-related metabolism. The target intervention on these pathways may reduce the mortality of medulloblastoma.
Asunto(s)
Neoplasias Cerebelosas , Meduloblastoma , Humanos , Niño , Espectrometría de Masas en Tándem , Meduloblastoma/diagnóstico , Metabolómica/métodos , Metaboloma , Neoplasias Cerebelosas/diagnóstico , Biomarcadores , Cromatografía Líquida de Alta PresiónRESUMEN
Covalent organic frameworks (COFs) have been attracting intense research due to their permanent porosity, designable architecture, and high stability. However, COFs are challenging to crystallize and their synthesis often results in tiny crystal sizes and low crystallinities, which hinders an unambiguous structure determination. Herein, we demonstrate that the structure of low-crystallinity COF Py-1P nanocrystals can be solved by coupling three-dimensional electron diffraction (3DED) with simulated annealing (SA). The resulting model is comparable to that obtained from high-crystallinity samples by dual-space method. Moreover, for low-resolution 3DED data, the model obtained by SA shows a better framework than those provided by classic direct method, dual-space method, and charge flipping. We further simulate data with different resolutions to understand the reliability of SA under different crystal quality conditions. The successful determination of Py-1P structure by SA compared to other methods provides new knowledge for using 3DED to analyze low-crystallinity and nanosized materials.
RESUMEN
With the new generation of technological revolution, the digital economy has progressively become a key driver of global economic development. In this context, how to promote green economic growth and improve green total factor productivity (GTFP) with the help of the digital economy is an important issue that urgently needs empirical research. We adopted the panel data of 278 Chinese prefecture-level cities from 2011 to 2020 to test whether the digital economy improves the GTFP through the Gaussian Mixed Model (GMM) dynamic panel model. The moderating effect model has been used to explore the impact mechanism from the perspectives of industrial structure upgrade and environmental regulation. In addition, a grouping regression was applied to the sample cities to test the heterogeneous impact of the digital economy on the GTFP. Based upon the empirical findings, this work has the following conclusions. First, the digital economy plays a significant role in improving the GTFP. Second, an industrial structure upgrade has a positive moderating effect on the ability of the digital economy to enhance the GTFP. The environmental regulation, in contrast, has a negative moderating effect. Third, the digital economy exerts heterogeneous impacts on the GTFP across regions, but not at the city level.
RESUMEN
Metal-octaaminophthalocyanine (MOAPc)-based 2D conductive metal-organic frameworks (cMOFs) have shown great potential in several applications, including sensing, energy storage, and electrocatalysis, due to their bimetallic characteristics. Here, we report a detailed metal substitution study on a family of isostructural cMOFs with Co2+, Ni2+, and Cu2+ as both the metal nodes and the metal centers in the MOAPc ligands. We observed that different metal nodes had variations in the reaction kinetics, particle sizes, and crystallinities. Importantly, the electronic structure and conductivity were found to be dependent on both types of metal sites in the 2D cMOFs. Ni-NiOAPc was found to be the most conductive one among the nine possible combinations with a conductivity of 54 ± 4.8 mS/cm. DFT calculations revealed that monolayer Ni-NiOAPc has neither the smallest bandgap nor the highest charge carrier mobility. Hence its highest conductivity stems from its high crystallinity. Collectively, these results provide structure property relationships for MOAPc-based cMOFs with amino coordination units.
RESUMEN
Covalent organic frameworks (COFs) are emerging crystalline porous polymers, showing great potential for applications but lacking gas-triggered flexibility. Atropisomerism was experimentally discovered in 1922 but has rarely been found in crystals with infinite framework structures. Here we report atropisomerism in COF single crystals. The obtained COF atropisomers, namely COF-320 and COF-320-A, have identical chemical and interpenetrated structures but differ in the spatial arrangement of repeating units. In contrast to the rigid COF-320 structure, its atropisomer (COF-320-A) exhibits unconventional gas sorption behaviours with one or more sorption steps in isotherms at different temperatures. Single-crystal structures determined from continuous rotation electron diffraction and in situ powder X-ray diffraction demonstrate that these adsorption steps originate from internal pore expansion with or without changing the crystal space group. COF-320-A recognizes different gases by expanding its internal pores continuously (crystal-to-amorphous transition) or discontinuously (crystal-to-crystal transition) or having mixed transition styles, distinguishing COF-320-A from existing soft/flexible porous crystals. These findings extend atropisomerism from molecules to crystals and propel COFs into the covalently linked soft porous crystal regime, further advancing applications of soft porous crystals in gas sorption, separation and storage.
RESUMEN
Two-dimensional conjugated metal-organic frameworks (2D c-MOFs) are emerging as a unique class of electronic materials. However, 2D c-MOFs with band gaps in the Vis-NIR and high charge carrier mobility are rare. Most of the reported conducting 2D c-MOFs are metallic (i.e. gapless), which largely limits their use in logic devices. Herein, we design a phenanthrotriphenylene-based, D2h -symmetric π-extended ligand (OHPTP), and synthesize the first rhombic 2D c-MOF single crystals (Cu2 (OHPTP)). The continuous rotation electron diffraction (cRED) analysis unveils the orthorhombic crystal structure at the atomic level with a unique slipped AA stacking. The Cu2 (OHPTP) is a p-type semiconductor with an indirect band gap of ≈0.50â eV and exhibits high electrical conductivity of 0.10â S cm-1 and high charge carrier mobility of ≈10.0â cm2 â V-1 s-1 . Theoretical calculations underline the predominant role of the out-of-plane charge transport in this semiquinone-based 2D c-MOF.
Asunto(s)
Estructuras Metalorgánicas , Conductividad Eléctrica , Electrónica , Electrones , CetonasRESUMEN
Deep neural networks (DNNs) usually contain massive parameters, but there is redundancy such that it is guessed that they could be trained in low-dimensional subspaces. In this paper, we propose a Dynamic Linear Dimensionality Reduction (DLDR) based on the low-dimensional properties of the training trajectory. The reduction method is efficient, supported by comprehensive experiments: optimizing DNNs in 40-dimensional spaces can achieve comparable performance as regular training over thousands or even millions of parameters. Since there are only a few variables to optimize, we develop an efficient quasi-Newton-based algorithm, obtain robustness to label noise, and improve the performance of well-trained models, which are three follow-up experiments that can show the advantages of finding such low-dimensional subspaces. The code is released (Pytorch: https://github.com/nblt/DLDR and Mindspore: https://gitee.com/mindspore/docs/tree/r1.6/docs/sample_code/dimension_reduce_training).
RESUMEN
A helical polypyrrole nanotube interwoven zeolitic imidazolate framework (ZIF) has been prepared for the first time. After pyrolysis, the helical carbon could act as highly active sites, while the 3D-connected nanoarchitecture contributed to fast charge transfer. The derived carbon material exhibits high activity for the ORR and good performance for a Zn-air battery.