Comprehensive study of nanostructured Bi2Te3 thermoelectric materials - insights from synchrotron radiation XRD, XAFS, and XRF techniques.

In this contribution, a comprehensive study of nanostructured Bi2Te3 (BT) thermoelectric material was performed using a combination of synchrotron radiation-based techniques such as XAFS, and XRF, along with some other laboratory techniques such as XRD, XPS, FESEM, and HRTEM. This study aims to track the change in morphological, compositional, average and local/electronic structures of Bi2Te3 of two different phases; nanostructure (thin film) and nanopowders (NPs). Bi2Te3 nanomaterial was fabricated as pellets using zone melting process in a one step process, while Bi2Te3 thin film was deposited on sodalime glass substrate using a vacuum thermal evaporation technique. Synchrotron radiation-based Bi LIII-edge fluorescence-mode X-ray absorption fine structure (XAFS) technique was performed to probe locally the electronic and fine structures of BT thin film around the Bi atom, while transmission-mode XAFS was used for BT NPs distributed in the PVP matrix. The structural features of the collected Bi LIII XANES spectra of thin film and powder samples of BT are compared with the simulated XANES spectrum of BT calculated using FDMNES code at 5 Å cluster size. Combining different off-line structural characterization techniques (XRD, FESEM, XPS, and HRTEM), along with those of synchrotron radiation-based techniques (XAFS and XRF) is necessary for complementary and supported average crystal, chemical, morphological and local electronic structural analyses for unveiling the variation between Bi2Te3 in the nanostructure/thin film and nanopowder morphology, and then connecting between the structural features and functions of BT in two different morphologies. After that, we measured the Seebeck coefficient and the power factor values for both the BT nanopowder and thin film.

Coupling between γ-irradiation and synchrotron-radiation-based XAFS techniques for studying Mn-doped ZnO nanoparticles.

γ-Irradiation and synchrotron-radiation-based X-ray absorption fine-structure (XAFS) spectroscopy have been used to induce structure disorder through the interaction of γ-rays (200 kGy) with fabricated Mn-doped ZnO nanoparticles (NPs) and then to examine thoroughly the resultant structural change. The extracted electronic/fine XAFS structural parameters reflect a compositional and γ-irradiation co-dependence. The average crystal structure of samples prepared by the sol-gel method was investigated by X-ray diffraction (XRD). A detailed structural XRD data analysis was carried out by applying a Rietveld refinement using the MAUD program. XAFS spectra were collected at the Zn K-edge (9659 eV) in transmission mode and at the Mn K-edge (6539 eV) in fluorescence mode. Direct evidence of the solubility of Mn ions in the ZnO structure was demonstrated by fitting the extended-XAFS (EXAFS) signal. Near-edge XAFS (XANES) analysis provided the oxidation states of Zn and Mn ions through fingerprint XANES spectra of the sample along with those of standard compounds. Linear combination fitting showed that the most fit chemical forms of Zn and Mn in the samples are ZnO and MnO, respectively. The oxidation states of both Zn and Mn XAFS absorbers were confirmed from pre-edge fitting. The results of the magnetic measurements were explained in light of the average and electronic/local structural information obtained from XRD, XANES and EXAFS techniques. The magnetic properties of the samples translate into an induced change in the average crystal and electronic/local structures upon Mn concentration change and γ-irradiation. XRD confirmed the successful preparation of hexagonal Mn-doped ZnO NPs with a crystallite size in the range 33-41 nm. Both XRD and EXAFS analysis detected a minor amount of Mn3O4 as a secondary phase. XANES and EXAFS provided information exploring the outstanding potential of the utilized protocol for detecting precisely the presence of the secondary phase of Mn3O4, which changes with Mn content (x). Mean-square relative displacement (σ2) values extracted from the EXAFS fitting were found to grow for Zn-Zn/Mn paths demonstrating the substitution of Mn/Zn into Zn crystal sites. The EXAFS analysis explains the reasons behind the enhancement in the magnetic properties and shows that the Mn doping content at x = 0.05 produces the most local atomic disorder in ZnO NPs. There is a strong harmony among the XRD, XANES, EXAFS and magnetization behavior of the Mn-doped ZnO NPs. Maximum magnetization was acquired at an Mn content of 0.05. γ-Ray-irradiated Zn1-xMnxO NPs are recommended as optimized candidates for showing the diversity of the applications.

Heavy metals concentrations and speciation of Pb and Ni in airborne particulate matter over two residential sites in Greater Cairo - reflection from synchrotron radiation.

Synchrotron radiation-based techniques [X-ray absorption near-edge structure (XANES) and X-ray fluorescence (XRF)] combined with inductively coupled plasma-mass spectrometry (ICP-MS) were used for the assessment of heavy metals concentrations as well as lead (Pb) and nickel (Ni) speciation in airborne particulate matter (PM10) over two residential sites in Greater Cairo. Nineteen 24 h high-volume samples collected at Giza (G) Square and Helwan (H) University (Egypt) were selected for this study. Mean concentrations of heavy metals in PM10 at both sites were found to have the same descending order of Pb > Cu > Ni > Cd > Co > As, of which concentrations of Pb, Cu, Ni and Cd in H samples were higher than those in G samples. For Pb, synchrotron-based XRF results were in good agreement with concentrations obtained by ICP-MS. The XANES spectra of PM10 at the Pb L2-edge and Ni K-edge were compared with those of Pb and Ni in model standard compounds to provide information on the potential oxidation states as well as the chemical forms of those elements. The data show that Pb has similar chemical environments in both series G and H with the predominance of Pb2+ oxidation state. Nickel was found as Ni(OH)2, NiO and Ni metal in the analyzed samples. However, the content of Ni in the background filter shows a very strong interference with that of the collected PM10. Carcinogenic and non-carcinogenic risks resulting from the inhalation of the studied heavy metals were assessed for children and adult residents and were found below the safe limits, at both sites.

Outstanding features of Cu-doped ZnS nanoclusters.

ZnS and their Cu-doped nanoclusters (NCs) were synthesized successfully using the wet chemical route with different Cu content. The crystalline structure was investigated using x-ray powder diffraction which assured the single-phase formation in cubic symmetry. High-resolution transmission electron microscope indicated the microstructure of NCs with a size ranging from 2-4 nm. A butterfly hysteresis (M-H) loop was observed at room temperature with large values of coercivity for the Cu content of x = 0.05. Photoluminescence emission spectra were recorded from 500-615 nm for pure and Cu-doped ZnS NCs at a 350 nm excitation wavelength. The sample exhibited green fluorescence bands peaking at 535, 544, 552.5, 558.2, and 560.6 nm, which confirmed the characteristic feature of Zn2+ as luminescent centers in the lattice. The additional yellow and orange emissions are due to defect levels or/and impurity centers. The dielectric constant as well as the conductivity values increased with increasing Cu content.