RESUMEN
Introduction: Although Coronavirus disease 2019 (COVID-19) vaccination is critical to control its spread, vaccine hesitancy varies significantly among the United States population; moreover, some vaccine recipients experienced various adverse effects. We aim to assess the impact of COVID-19 vaccine hesitancy in a university-affiliated community, the factors affecting participants' decisions, and their adverse effects. Methods: A pre-vaccination online Institutional Review Board IRB-approved survey was emailed in Nov/Dec 2020, 2 months before the implementation of state-policy protocols for COVID-19 vaccination. A post-vaccination survey was emailed in May/June 2021, two months after protocol execution. A third follow-up survey was sent in Nov/Dec 2021, and a fourth was sent in June/July 2022. The study population included three groups of adult participants: university students, faculty, and staff-(MS), university health system patients-(MP), and Cancer Center patients-(MCP). The study was designed as a longitudinal cohort study. Statistical analyses were performed using SPSS. Results: With a combined response rate of 26% (40,578/157,292) among the four surveys, 15,361 participants completed the first survey (MS = 4,983, MP = 9,551, and MCP = 827). 2/3 of participants (63.5%) were willing to get vaccinated, with a significant difference in acceptance among groups, MS:56.6%, MP:66.2%, and MCP:71.6% (p < 0.05). Vaccine acceptance rates reached 89% in the second survey after the vaccine's approval, with a lower acceptance rate of MS:84.6% than with MP:90.74% and MCP:92.47% participants (p < 0.05). Safety and effectiveness concerns were the main factors affecting participants' decisions in all the first three surveys; however, participants reported these concerns decreased between pre-vaccination, post-vaccination, and follow-up surveys with 87%, 56%, and 46%, respectively(p < 0.05). More than two-thirds of the participants (70%) reported having either minor/moderate symptoms (61.6%) or major symptoms (8.6%) after getting some of the vaccine doses (p < 0.05). Conclusion: The hesitance of COVID-19 vaccination was associated with concerns regarding its safety and efficacy. Vaccine acceptance rose higher than expected after protocol execution, likely due to continuous education, whereas safety and efficacy remain factors hindering vaccine acceptance. Continuous education focusing on safety and efficacy of the vaccine can reduce vaccine hesitancy and raise the rates of vaccination.
RESUMEN
With the development of the technical trend, concrete using waste alternate material instead of sand material found economic potential for good structural behaviour. Besides, the susceptible crack, low strength-to-weight ratio, and low compressive strength are the reasons for shrinkage. Due to this reason, the investigation aims to limit the shrinkage under live load and increase the compression and flexural strength by the introduction of coconut waste chopped fiber (wCF), waste fly ash (wFA), and carbon nanotube powder (CNT) blended with conventional Portland paste. The developed concrete consists of 5 wt% wCF, 10 wt% wFA, and 0, 5, 10, and 15 wt% of CNT and is subjected to X-ray diffraction analysis, bulk density, compression and flexural strength, and water absorption studies. The X-ray diffraction pattern revealed the wCF, wFA, CNT, and matrix compositions. The concrete developed with 5 wt% wCF, 10 wt% wFA, and 15 wt% CNT cured within 28 days recorded maximum behaviour of compression strength (47 ± 1.8 MPa), flexural strength (4.9 ± 0.19 MPa), and water absorption of (2.8 ± 0.05 %).
RESUMEN
The future of successful public health practice requires public health students to be educated within a decolonised curriculum that challenges the historical biases and inequalities that are deeply embedded within global public health and society. In this commentary, we reflect on what it can mean and why it's important to decolonise and diversify a public health curriculum. We describe how we used a student-led approach to begin this process, and share recommendations that are applicable to national and international curricula.
RESUMEN
Abstract The present study involves the chemical and bacteriological analysis of water from different sources i.e., bore, wells, bottle, and tap, from Peshawar, Mardan, Swat and Kohat districts of Khyber Pakhtunkhwa (KP) province, Pakistan. From each district, 50 water samples (10 samples from each source), regardless of urban and rural status, were collected from these sources and analysed for sulphates, nitrates, nitrites, chlorides, total soluble solids and coliforms (E. coli). Results indicated that majority of the water sources had unacceptable E. coli count i.e.> 34 CFU/100mL. E. coli positive samples were high in Mardan District, followed by Kohat, Swat and Peshawar district. Besides this, the some water sources were also chemically contaminated by different inorganic fertilizers (nitrates/nitrites of sodium, potassium) but under safe levels whereas agricultural and industrial wastes (chloride and sulphate compounds) were in unsafe range. Among all districts, the water quality was found comparatively more deteriorated in Kohat and Mardan districts than Peshawar and Swat districts. Such chemically and bacteriologically unfit water sources for drinking and can cause human health problems.
Resumo O presente estudo envolve a análise química e bacteriológica de água de diferentes fontes, ou seja, furo, poços, garrafa e torneira, dos distritos de Peshawar, Mardan, Swat e Kohat da província de Khyber Pakhtunkhwa (KP), Paquistão. De cada distrito, 50 amostras de água (10 amostras de cada fonte), independentemente do status urbano e rural, foram coletadas dessas fontes e analisadas para sulfatos, nitratos, nitritos, cloretos, sólidos solúveis totais e coliformes (E. coli). Os resultados indicaram que a maioria das fontes de água tinha uma contagem inaceitável de E. coli, ou seja, > 34 UFC / 100 mL. As amostras positivas para E. coli foram elevadas no distrito de Mardan, seguido por Kohat, Swat e distrito de Peshawar. Além disso, algumas fontes de água também foram contaminadas quimicamente por diferentes fertilizantes inorgânicos (nitratos/nitritos de sódio, potássio), mas em níveis seguros, enquanto os resíduos agrícolas e industriais (compostos de cloreto e sulfato) estavam em níveis inseguros. Entre todos os distritos, a qualidade da água foi considerada comparativamente mais deteriorada nos distritos de Kohat e Mardan do que nos distritos de Peshawar e Swat. Essas fontes de água química e bacteriologicamente impróprias para beber podem causar problemas à saúde humana.
Asunto(s)
Humanos , Agua Potable , Calidad del Agua , Pakistán , Escherichia coliRESUMEN
Abstract The present study involves the chemical and bacteriological analysis of water from different sources i.e., bore, wells, bottle, and tap, from Peshawar, Mardan, Swat and Kohat districts of Khyber Pakhtunkhwa (KP) province, Pakistan. From each district, 50 water samples (10 samples from each source), regardless of urban and rural status, were collected from these sources and analysed for sulphates, nitrates, nitrites, chlorides, total soluble solids and coliforms (E. coli). Results indicated that majority of the water sources had unacceptable E. coli count i.e.> 34 CFU/100mL. E. coli positive samples were high in Mardan District, followed by Kohat, Swat and Peshawar district. Besides this, the some water sources were also chemically contaminated by different inorganic fertilizers (nitrates/nitrites of sodium, potassium) but under safe levels whereas agricultural and industrial wastes (chloride and sulphate compounds) were in unsafe range. Among all districts, the water quality was found comparatively more deteriorated in Kohat and Mardan districts than Peshawar and Swat districts. Such chemically and bacteriologically unfit water sources for drinking and can cause human health problems.
Resumo O presente estudo envolve a análise química e bacteriológica de água de diferentes fontes, ou seja, furo, poços, garrafa e torneira, dos distritos de Peshawar, Mardan, Swat e Kohat da província de Khyber Pakhtunkhwa (KP), Paquistão. De cada distrito, 50 amostras de água (10 amostras de cada fonte), independentemente do status urbano e rural, foram coletadas dessas fontes e analisadas para sulfatos, nitratos, nitritos, cloretos, sólidos solúveis totais e coliformes (E. coli). Os resultados indicaram que a maioria das fontes de água tinha uma contagem inaceitável de E. coli, ou seja, > 34 UFC / 100 mL. As amostras positivas para E. coli foram elevadas no distrito de Mardan, seguido por Kohat, Swat e distrito de Peshawar. Além disso, algumas fontes de água também foram contaminadas quimicamente por diferentes fertilizantes inorgânicos (nitratos/nitritos de sódio, potássio), mas em níveis seguros, enquanto os resíduos agrícolas e industriais (compostos de cloreto e sulfato) estavam em níveis inseguros. Entre todos os distritos, a qualidade da água foi considerada comparativamente mais deteriorada nos distritos de Kohat e Mardan do que nos distritos de Peshawar e Swat. Essas fontes de água química e bacteriologicamente impróprias para beber podem causar problemas à saúde humana.
RESUMEN
In this paper, a new carbon nanotube field effect transistor (CNTFET)-based second-order fully differential all-pass filter circuit is presented. The realized filter uses CNTFET-based transconductors and grounded capacitors. An active-only second-order fully differential all-pass filter circuit topology is also presented by replacing the grounded capacitance with a CNTFET-based varactor to achieve filter tunability. By controlling the varactor capacitance, active-only second-order fully differential all-pass filter tunability in the range of 15 GHz to 27.5 GHz is achieved. The proposed active-only circuit works on -oltage, low-power dissipation and high tunable pole frequency. The realized circuit operations are verified through the HPSPICE simulation tool. Deng's CNTFET model is utilized to verify the filter performances at the 16 nm technology node. It is seen that the proposed filter simulation justifies the theoretical predictions and works efficiently in the deep-submicron technology.
RESUMEN
The aluminium alloy (AA1100) was familiar with automotive flexible shaft coupling applications due to its high strength, good machinability, and superior thermal and resistance to corrosion characteristics. Machining tool life drives the prominent role for deciding the product quality (machining) act aims to productivity target with zero interruptions. The novelty of this present investigation is the focus on increasing tool life during the complexity of CNC turning operation for AA1100 alloy by using CBN coated insert tool with varied input parameters of spindle speed (SS), feed rate (f), and depth of cut (DOC). Design of experiment (L16), analysis of variance (ANOVA) statistical system adopted with response surface methodology (RSM) is implemented for experimental analysis. The turning input parameters of SS, f and DOC are considered as factors and its SS (900, 1100, 1300, and 1500 rpm), f (0.1, 0.15, 0.2, and 0.25), and DOC (0.1, 0.2, 0.3, and 0.4 mm) values are treated as levels. The investigational analysis was made with the ANOVA technique and the desirability of high tool life with input turning parameters was optimized by RSM, and sample no 11/16 was predicted as high tool life and performed with extended working hours compared to other samples. The RSM optimized best turning parameter combinations are 0.1 mm DOC, 0.2mm/rev to 0.25mm/rev f, and 1300 rpm-1500 rpm SS, facilitating a higher tool life of more than 20min.
RESUMEN
In recent periods, a broad assortment of continual organic contaminants has been released into our natural water resources. Indeed, it is exceedingly poisonous and perilous to living things; thus, the elimination of these organic pollutants before release into the water bodies is vital. A variety of techniques have been utilized to remove these organic pollutants with advanced oxidation photocatalytic methods with zinc oxide (ZnO) nanoparticles being commonly used as a capable catalyst for contaminated water treatment. Nevertheless, its broad energy gap, which can be only stimulated under an ultraviolet (UV) light source, and high recombination pairs of electrons and holes limit their photocatalytic behaviors. However, numerous methods have been suggested to decrease its energy gap for visible regions. Including, the doping ZnO with metal ions (dopant) can be considered as an effectual route not only the reason for a movement of the absorption edges toward the higher (visible light) region but also to lower the electron-hole pair (e--h+) recombination. This review concentrated on the impact of dissimilar types of metal ions (dopants) on the advancement in the degradation performance of ZnO. So, this work demonstrates a vital review of contemporary attainments in the alteration of ZnO nanoparticles for organic pollutants eliminations. Besides, the effect of doping ions including transition metals, rare earth metals, and metal ions (substitutional and interstitial) concerning numerous types of altered ZnO are summarized. The photodegradation mechanisms for pristine and metal-modified ZnO nanoparticles are also conferred.
Asunto(s)
Contaminantes Ambientales , Nanopartículas del Metal , Óxido de Zinc , Zinc , Metales , Compuestos Orgánicos , Colorantes , Preparaciones Farmacéuticas , Iones , CatálisisRESUMEN
In this research work, the mechanical properties of high-strength self-compacting concrete (HSSCC) were studied. Three mixes were selected, having compressive strengths of more than 70, 80, and 90 MPa, respectively. For these three mixes, the stress-strain characteristics were studied by casting cylinders. It was observed during the testing that the binder content and water-to-binder ratio influence the strength of HSSCC, and slow changes in stress-strain curves were seen as the strength increased. The use of HSSCC results in reduced bond cracking, leading to a more linear and steeper stress-strain curve in the ascending branches as the strength of the concrete increases. Elastic properties such as modulus of elasticity and Poisson's ratio of HSSCC were calculated using experimental data. In HSSCC, since the aggregate content is lower and the size of the aggregates is smaller, it will have a lower modulus of elasticity compared to normal vibrating concrete (NVC). Thus, an equation is proposed from the experimental results for predicting the modulus of elasticity of HSSCC. The results suggest that the proposed equation for predicting the elastic modulus of HSSCC for strengths ranging from 70 to 90 MPa is valid. It was also observed that the Poisson's ratio values for all three mixes of HSSCC were found to be lower than the typical value for NVC, indicating a higher degree of stiffness.
RESUMEN
High-performance concrete (HPC) is increasingly used in construction due to its superior strength and durability. However, current stress block parameters used for designing normal-strength concrete cannot be safely applied to HPC. To address this issue, new stress block parameters have been proposed through experimental works, which are used for designing HPC members. In this study, the behavior of HPC was investigated using these stress block parameters. Two-span beams made of HPC were tested under five-point bending, and an idealized stress block curve was derived from the experimental stress-strain curve for grades 60, 80, and 100 MPa. Based on the stress block curve, equations for the ultimate moment of resistance, depth of the neutral axis, limiting moment of resistance, and maximum depth of the neutral axis were proposed. An idealized load-deformation curve was also developed, which identified four significant events: first cracking, yielding of reinforced steel, crushing of concrete with spalling of cover, and ultimate failure. The predicted values were found to be in good agreement with the experimental values, and the average location of the first crack was identified to be 0.270 L, measured from the central support on either side of the span. These findings provide important insights for the design of HPC structures, contributing to the development of more resilient and durable infrastructure.
Asunto(s)
Lentes de Contacto Hidrofílicos , Cristalino , Humanos , Viscosidad , Cristalino/cirugía , EscleróticaRESUMEN
Amblyomin-X is a Kunitz-type FXa inhibitor identified through the transcriptome analysis of the salivary gland from Amblyomma sculptum tick. This protein consists of two domains of equivalent size, triggers apoptosis in different tumor cell lines, and promotes regression of tumor growth, and reduction of metastasis. To study the structural properties and functional roles of the N-terminal (N-ter) and C-terminal (C-ter) domains of Amblyomin-X, we synthesized them by solid-phase peptide synthesis, solved the X-Ray crystallographic structure of the N-ter domain, confirming its Kunitz-type signature, and studied their biological properties. We show here that the C-ter domain is responsible for the uptake of Amblyomin-X by tumor cells and highlight the ability of this domain to deliver intracellular cargo by the strong enhancement of the intracellular detection of molecules with low cellular-uptake efficiency (p15) after their coupling with the C-ter domain. In contrast, the N-ter Kunitz domain of Amblyomin-X is not capable of crossing through the cell membrane but is associated with tumor cell cytotoxicity when it is microinjected into the cells or fused to TAT cell-penetrating peptide. Additionally, we identify the minimum length C-terminal domain named F2C able to enter in the SK-MEL-28 cells and induces dynein chains gene expression modulation, a molecular motor that plays a role in the uptake and intracellular trafficking of Amblyomin-X.
RESUMEN
Oral squamous cell carcinomas (OSCC) remain a major healthcare burden in Asian countries. In Pakistan alone, it is the most common cancer in males and second only to breast cancer in females. Alarmingly, treatment options for OSCC remain limited. With this context, investigations made to explore the inflammatory milieu of OSCC become highly relevant, with the hope of practicing immunotherapeutic approaches to address this highly prevalent tumor. We investigated the newly identified innate lymphoid cells (ILCs) and associated cytokines in well-defined human oral squamous cell carcinoma (OSCC) as well as in a 7,12-dimethylbenz[a]anthracene (DMBA)-induced murine model of OSCC using flow cytometry and quantitative real-time polymerase chain reaction (qPCR). We further went on to explore molecular circuitry involved in OSCC by developing a murine model of OSCC and using an α-Thy1 antibody to inhibit ILCs. Amongst the ILCs that we found in human OSCC, ILC3 (23%) was the most abundant, followed by ILC2 (17%) and ILC1 (1%). Mice were divided into four groups: DMBA (n = 33), DMBA+antibody (Ab) (n = 30), acetone (n = 5), and control (n = 5). In murine OSCC tissues, ILC1 and ILC3 were down-infiltrated, while ILC2 remained unchanged compared to controls. Interestingly, compared to the controls (DMBA group), mice treated with the α-Thy1 antibody showed fewer numbers of large tumors, and a larger percentage of these mice were tumor-free at this study's end point. We present novel data on the differential expansion/downsizing of ILCs in OSCC, which provides a pivotal basis to dive deeper into molecular circuitry and the OSCC tumor niche to devise novel diagnostic, therapeutic, and prognostic strategies to prevent/treat oral cancers.
Asunto(s)
Carcinoma de Células Escamosas , Neoplasias de Cabeza y Cuello , Neoplasias de la Boca , Masculino , Femenino , Humanos , Ratones , Animales , Inmunidad Innata , Carcinoma de Células Escamosas/patología , Carcinoma de Células Escamosas de Cabeza y Cuello , Linfocitos , Modelos Animales de Enfermedad , Neoplasias de la Boca/patología , PakistánRESUMEN
Abstract In the current report, we studied the possible inhibitors of COVID-19 from bioactive constituents of Centaurea jacea using a threefold approach consisting of quantum chemical, molecular docking and molecular dynamic techniques. Centaurea jacea is a perennial herb often used in folk medicines of dermatological complaints and fever. Moreover, anticancer, antioxidant, antibacterial and antiviral properties of its bioactive compounds are also reported. The Mpro (Main proteases) was docked with different compounds of Centaurea jacea through molecular docking. All the studied compounds including apigenin, axillarin, Centaureidin, Cirsiliol, Eupatorin and Isokaempferide, show suitable binding affinities to the binding site of SARS-CoV-2 main protease with their binding energies -6.7 kcal/mol, -7.4 kcal/mol, -7.0 kcal/mol, -5.8 kcal/mol, -6.2 kcal/mol and -6.8 kcal/mol, respectively. Among all studied compounds, axillarin was found to have maximum inhibitor efficiency followed by Centaureidin, Isokaempferide, Apigenin, Eupatorin and Cirsiliol. Our results suggested that axillarin binds with the most crucial catalytic residues CYS145 and HIS41 of the Mpro, moreover axillarin shows 5 hydrogen bond interactions and 5 hydrophobic interactions with various residues of Mpro. Furthermore, the molecular dynamic calculations over 60 ns (6×106 femtosecond) time scale also shown significant insights into the binding effects of axillarin with Mpro of SARS-CoV-2 by imitating protein like aqueous environment. From molecular dynamic calculations, the RMSD and RMSF computations indicate the stability and dynamics of the best docked complex in aqueous environment. The ADME properties and toxicity prediction analysis of axillarin also recommended it as safe drug candidate. Further, in vivo and in vitro investigations are essential to ensure the anti SARS-CoV-2 activity of all bioactive compounds particularly axillarin to encourage preventive use of Centaurea jacea against COVID-19 infections.
Resumo No presente relatório, estudamos os possíveis inibidores de Covid-19 de constituintes bioativos de Centaurea jacea usando uma abordagem tripla que consiste em técnicas de química quântica, docking molecular e dinâmica molecular. Centaurea jacea é uma erva perene frequentemente usada em remédios populares de doenças dermatológicas e febre. Além disso, as propriedades anticâncer, antioxidante, antibacteriana e antiviral de seus compostos bioativos também são relatadas. A Mpro (proteases principais) foi acoplada a diferentes compostos de Centaurea jacea por meio de docking molecular. Todos os compostos estudados, incluindo apigenina, axilarina, Centaureidina, Cirsiliol, Eupatorina e Isokaempferide, mostram afinidades de ligação adequadas ao sítio de ligação da protease principal SARS-CoV-2 com suas energias de ligação -6,7 kcal / mol, -7,4 kcal / mol, - 7,0 kcal / mol, -5,8 kcal / mol, -6,2 kcal / mol e -6,8 kcal / mol, respectivamente. Dentre todos os compostos estudados, a axilarina apresentou eficiência máxima de inibidor, seguida pela Centaureidina, Isokaempferida, Apigenina, Eupatorina e Cirsiliol. Nossos resultados sugeriram que a axilarina se liga aos resíduos catalíticos mais cruciais CYS145 e HIS41 do Mpro, além disso a axilarina mostra 5 interações de ligações de hidrogênio e 5 interações hidrofóbicas com vários resíduos de Mpro. Além disso, os cálculos de dinâmica molecular em uma escala de tempo de 60 ns (6 × 106 femtossegundos) também mostraram percepções significativas sobre os efeitos de ligação da axilarina com Mpro de SARS-CoV-2 por imitação de proteínas como o ambiente aquoso. A partir de cálculos de dinâmica molecular, os cálculos RMSD e RMSF indicam a estabilidade e dinâmica do melhor complexo ancorado em ambiente aquoso. As propriedades ADME e a análise de previsão de toxicidade da axilarina também a recomendaram como um candidato a medicamento seguro. Além disso, as investigações in vivo e in vitro são essenciais para garantir a atividade anti-SARS-CoV-2 de todos os compostos bioativos, particularmente a axilarina, para encorajar o uso preventivo de Centaurea jacea contra infecções por Covid-19.
Asunto(s)
Humanos , Preparaciones Farmacéuticas , Centaurea , COVID-19 , Inhibidores de Proteasas , Simulación de Dinámica Molecular , Simulación del Acoplamiento Molecular , SARS-CoV-2RESUMEN
Abstract Hybridization and Polyploidization are most common of the phenomenon observed in plants, especially in the genus Nicotiana leading to the duplication of genome. Although genomic changes associated with these events has been studied at various levels but the genome size and GC content variation is less understood because of absence of sufficient genomic data. In this study the flow cytometry technique was used to uncover the genome size and GC contents of 46 Nicotiana species and we compared the genomic changes associated with the hybridization events along evolutionary time scale. The genome size among Nicotiana species varied between 3.28 pg and 11.88 pg whereas GC contents varied between 37.22% and 51.25%. The tetraploid species in genus Nicotiana including section Polydiclae, Repandae, Nicotiana, Rustica and Sauveolentes revealed both up and downsizing in their genome sizes when compared to the sum of genomes of their ancestral species. The genome sizes of three homoploid hybrids were found near their ancestral species. Loss of large genome sequence was observed in the evolutionary more aged species (>10 Myr) as compared to the recently evolved one's (<0.2 Myr). The GC contents were found homogenous with a mean difference of 2.46% among the Nicotiana species. It is concluded that genome size change appeared in either direction whereas the GC contents were found more homogenous in genus Nicotiana.
Resumo A hibridização e a poliploidização são os fenômenos mais comuns observados em plantas, principalmente no gênero Nicotiana, levando à duplicação do genoma. Embora as mudanças genômicas associadas a esses eventos tenham sido estudadas em vários níveis, o tamanho do genoma e a variação do conteúdo de GC são menos compreendidos devido à ausência de dados genômicos suficientes. Neste estudo, a técnica de citometria de fluxo foi usada para descobrir o tamanho do genoma e o conteúdo de GC de 46 espécies de Nicotiana, e comparamos as mudanças genômicas associadas aos eventos de hibridização ao longo da escala de tempo evolutiva. O tamanho do genoma entre as espécies de Nicotiana variou entre 3,28 pg e 11,88 pg, enquanto os conteúdos de GC variaram entre 37,22% e 51,25%. As espécies tetraploides do gênero Nicotiana, incluindo as seções Polydiclae, Repandae, Nicotiana, Rustica e Sauveolentes, revelaram aumento e redução do tamanho do genoma quando comparados à soma dos genomas de suas espécies ancestrais. Os tamanhos do genoma de três híbridos homoploides foram encontrados perto de suas espécies ancestrais. A perda da grande sequência do genoma foi observada nas espécies evolutivas mais velhas (> 10 Myr) em comparação com as que evoluíram recentemente (< 0,2 Myr). Os teores de GC foram homogêneos com diferença média de 2,46% entre as espécies de Nicotiana. Conclui-se que a mudança no tamanho do genoma apareceu em ambas as direções, enquanto os conteúdos de GC foram encontrados mais homogêneos no gênero Nicotiana.
Asunto(s)
Nicotiana/genética , Genoma de Planta/genética , Filogenia , Composición de Base , Tamaño del GenomaRESUMEN
In recent days, cheapest alternative carbon source for fermentation purpose is desirable to minimize production cost. Xylanases have become attractive enzymes as their potential in bio-bleaching of pulp and paper industry. The objective of the present study was to identify the potential ability on the xylanase production by locally isolated Bacillus pumilus BS131 by using waste fiber sludge and wheat bran media under submerged fermentation. Culture growth conditions were optimized to obtain significant amount of xylanase. Maximum xylanase production was recorded after 72 hours of incubation at 30 °C and 7 pH with 4.0% substrate concentration. In the nutshell, the production of xylanase using inexpensive waste fiber sludge and wheat-bran as an alternative in place of expensive xylan substrate was more cost effective and environment friendly.
Nos últimos dias, a fonte alternativa de carbono mais barata para fins de fermentação é desejável para minimizar o custo de produção. As xilanases têm se tornado enzimas atraentes como seu potencial no biobranqueamento da indústria de papel e celulose. O objetivo do presente estudo foi identificar a capacidade potencial na produção de xilanase por Bacillus pumilus BS131 isolado localmente usando lodo de fibra residual e farelo de trigo em meio de fermentação submersa. As condições de crescimento da cultura foram otimizadas para obter uma quantidade significativa de xilanase. A produção máxima de xilanase foi registrada após 72 horas de incubação a 30 °C e pH 7 com concentração de substrato de 4,0%. Resumindo, a produção de xilanase usando lodo de fibra residual de baixo custo e farelo de trigo como uma alternativa no lugar do substrato de xilano caro foi mais econômica e ecológica.
Asunto(s)
Bacillus pumilus/química , Xilanos/análisis , Especificidad por SustratoRESUMEN
The medicinal attributes of honey appears to overshadow its importance as a functional food. Consequently, several literatures are rife with ancient uses of honey as complementary and alternative medicine, with relevance to modern day health care, supported by evidence-based clinical data, with little attention given to honeys nutritional functions. The moisture contents of honey extracted from University of Veterinary and Animal Sciences, Lahore honey bee farm was 12.19% while that of natural source was 9.03 ± 1.63%. Similarly, ash and protein contents of farmed honey recorded were 0.37% and 5.22%, respectively. Whereas ash and protein contents of natural honey were 1.70 ± 1.98% and 6.10 ± 0.79%. Likewise fat, dietary fiber and carbohydrates contents of farmed source documented were 0.14%, 1.99% and 62.26% respectively. Although fat, dietary fiber and carbohydrates contents of honey taken from natural resource were 0.54 ± 0.28%, 2.76 ± 1.07% and 55.32 ± 2.91% respectively. Glucose and fructose contents of honey taken out from honeybee farm were 27% and 34% but natural source were 22.50 ± 2.12% and 28.50 ± 3.54%. Glucose and fructose contents of honey taken out from honeybee farm were 27% and 34% but natural source were 22.50 ± 2.12% and 28.50 ± 3.54%. Similarly, sucrose and maltose contents of farmed honey were 2.5% and 12% while in natural honey were 1.35 ± 0.49% and 8.00 ± 1.41% respectively. The present study indicates that such as moisture, carbohydrates, sucrose and maltose contents were higher farmed honey as compared to the natural honey. In our recommendation natural honey is better than farmed honey.
Os atributos medicinais do mel parecem ofuscar sua importância como alimento funcional. Consequentemente, várias literaturas estão repletas de usos antigos do mel como medicina complementar e alternativa, com relevância para os cuidados de saúde modernos, apoiados por dados clínicos baseados em evidências, com pouca atenção dada às funções nutricionais do mel. O teor de umidade do mel extraído da Universidade de Veterinária e Ciências Animais, fazenda de abelhas de Lahore, foi de 12,19%, enquanto o de fonte natural foi de 9,03 ± 1,63%. Da mesma forma, os teores de cinzas e proteínas do mel cultivado foram de 0,37% e 5,22%, respectivamente. Já os teores de cinzas e proteínas do mel natural foram de 1,70 ± 1,98% e 6,10 ± 0,79%. Da mesma forma, os teores de gordura, fibra dietética e carboidratos de origem cultivada documentados foram de 0,14%, 1,99% e 62,26%, respectivamente. Embora os teores de gordura, fibra alimentar e carboidratos do mel retirado dos recursos naturais fossem de 0,54 ± 0,28%, 2,76 ± 1,07% e 55,32 ± 2,91%, respectivamente. Os conteúdos de glicose e frutose do mel retirado da fazenda de abelhas foram de 27% e 34%, mas a fonte natural foi de 22,50 ± 2,12% e 28,50 ± 3,54%. Os conteúdos de glicose e frutose do mel retirado da fazenda de abelhas foram de 27% e 34%, mas a fonte natural foi de 22,50 ± 2,12% e 28,50 ± 3,54%. Da mesma forma, os teores de sacarose e maltose no mel cultivado foram de 2,5% e 12%, enquanto no mel natural foram de 1,35 ± 0,49% e 8,00 ± 1,41%, respectivamente. O presente estudo indica que os teores de umidade, carboidratos, sacarose e maltose foram maiores no mel cultivado em comparação ao mel natural. Em nossa recomendação, o mel natural é melhor que o mel de cultivo.
Asunto(s)
Abejas , Miel/análisisRESUMEN
Previous studies have suggested that arsenic crosses the placenta and affects the fetus development. The study under consideration aims to show comparative ameliorative effect of Moringa oleifera leaf and flower extracts against sodium arsenate induced fetus toxicity of mice. Pregnant mice (N=44) were kept in lab and divided into eleven group from (A to K) and were orally administered the doses 6 mg/kg, 12 mg/kg for sodium arsenate, 150 mg/kg and 300 mg/kg for Moringa oleifera leaf extracts (MOLE) and 150 mg/kg and 300 mg/kg for Moringa oleifera flower extracts (MOFE) comparing with control. The investigation revealed evident reduction in the fetuses weight, hind limb, fore limb, tail and snout length, crown rump and head circumferences well as malformations in tail, feet, arms, legs, skin and eyes in the negative control group (only administered with sodium arsenate). Co-administration of sodium arsenate with MOLE and MOFE ameliorate the reversed effect of sodium arsenate on the shape, length, body weight and DNA damage of fetus significantly at 95% confidence interval. However, Moringa oleifera leaf extract showed more significant results in comparison to Moringa oleifera flower extract. Hence concluded that Moringa oleifera leaf extract ameliorated the embryo toxic effects of sodium arsenate and can be used against environmental teratogens.
Estudos anteriores sugeriram que o arsênio atravessa a placenta e afeta o desenvolvimento do feto. O estudo em consideração visa mostrar o efeito melhorador comparativo de extratos de folhas e flores de Moringa oleifera contra a toxicidade fetal induzida por arseniato de sódio em camundongos. Camundongos grávidas (N = 44) foram mantidos em laboratório e divididos em 11 grupos (de A a K) e foram administrados por via oral nas doses de 6 mg/kg, 12 mg/kg para arseniato de sódio, 150 mg/kg e 300 mg/kg para extratos de folhas de Moringa oleifera (MOLE) e 150 mg/kg e 300 mg/kg para extratos de flores de Moringa oleifera (MOFE) em comparação com o controle. A investigação revelou redução evidente no peso do feto, membro posterior, membro anterior, comprimento da cauda e focinho, coroa, nádega e circunferência da cabeça, bem como malformações na cauda, pés, braços, pernas, pele e olhos no grupo de controle negativo (apenas administrado com arseniato de sódio). A coadministração de arseniato de sódio com MOLE e MOFE melhora significativamente o efeito reverso do arseniato de sódio na forma, comprimento, peso corporal e dano ao DNA do feto, com intervalo de confiança de 95%. No entanto, o extrato da folha da Moringa oleifera apresentou resultados mais significativos em comparação ao extrato da flor da Moringa oleifera. Portanto, concluiu que o extrato da folha de Moringa oleifera melhorou os efeitos tóxicos do arseniato de sódio para o embrião e pode ser usado contra teratógenos ambientais.
Asunto(s)
Femenino , Animales , Embarazo , Ratones , Arseniatos/toxicidad , Ensayo Cometa/veterinaria , Feto/anomalías , Feto/efectos de los fármacos , Lesiones Prenatales/veterinaria , Moringa oleifera/embriologíaRESUMEN
In the current report, we studied the possible inhibitors of COVID-19 from bioactive constituents of Centaurea jacea using a threefold approach consisting of quantum chemical, molecular docking and molecular dynamic techniques. Centaurea jacea is a perennial herb often used in folk medicines of dermatological complaints and fever. Moreover, anticancer, antioxidant, antibacterial and antiviral properties of its bioactive compounds are also reported. The Mpro (Main proteases) was docked with different compounds of Centaurea jacea through molecular docking. All the studied compounds including apigenin, axillarin, Centaureidin, Cirsiliol, Eupatorin and Isokaempferide, show suitable binding affinities to the binding site of SARS-CoV-2 main protease with their binding energies -6.7 kcal/mol, -7.4 kcal/mol, -7.0 kcal/mol, -5.8 kcal/mol, -6.2 kcal/mol and -6.8 kcal/mol, respectively. Among all studied compounds, axillarin was found to have maximum inhibitor efficiency followed by Centaureidin, Isokaempferide, Apigenin, Eupatorin and Cirsiliol. Our results suggested that axillarin binds with the most crucial catalytic residues CYS145 and HIS41 of the Mpro, moreover axillarin shows 5 hydrogen bond interactions and 5 hydrophobic interactions with various residues of Mpro. Furthermore, the molecular dynamic calculations over 60 ns (6×106 femtosecond) time scale also shown significant insights into the binding effects of axillarin with Mpro of SARS-CoV-2 by imitating protein like aqueous environment. From molecular dynamic calculations, the RMSD and RMSF computations indicate the stability and dynamics of the best docked complex in aqueous environment. The ADME properties and toxicity prediction analysis of axillarin also recommended it as safe drug candidate. Further, in vivo and in [...].
No presente relatório, estudamos os possíveis inibidores de Covid-19 de constituintes bioativos de Centaurea jacea usando uma abordagem tripla que consiste em técnicas de química quântica, docking molecular e dinâmica molecular. Centaurea jacea é uma erva perene frequentemente usada em remédios populares de doenças dermatológicas e febre. Além disso, as propriedades anticâncer, antioxidante, antibacteriana e antiviral de seus compostos bioativos também são relatadas. A Mpro (proteases principais) foi acoplada a diferentes compostos de Centaurea jacea por meio de docking molecular. Todos os compostos estudados, incluindo apigenina, axilarina, Centaureidina, Cirsiliol, Eupatorina e Isokaempferide, mostram afinidades de ligação adequadas ao sítio de ligação da protease principal SARS-CoV-2 com suas energias de ligação -6,7 kcal / mol, -7,4 kcal / mol, - 7,0 kcal / mol, -5,8 kcal / mol, -6,2 kcal / mol e -6,8 kcal / mol, respectivamente. Dentre todos os compostos estudados, a axilarina apresentou eficiência máxima de inibidor, seguida pela Centaureidina, Isokaempferida, Apigenina, Eupatorina e Cirsiliol. Nossos resultados sugeriram que a axilarina se liga aos resíduos catalíticos mais cruciais CYS145 e HIS41 do Mpro, além disso a axilarina mostra 5 interações de ligações de hidrogênio e 5 interações hidrofóbicas com vários resíduos de Mpro. Além disso, os cálculos de dinâmica molecular em uma escala de tempo de 60 ns (6 × 106 femtossegundos) também mostraram percepções significativas sobre os efeitos de ligação da axilarina com Mpro de SARS-CoV-2 por imitação de proteínas como o ambiente aquoso. A partir de cálculos de dinâmica molecular, os cálculos RMSD e RMSF indicam a estabilidade e dinâmica do melhor complexo ancorado em ambiente [...].