Understanding the preparative chemistry of atomically dispersed nickel catalysts for achieving high-efficiency H2O2 electrosynthesis.

Electrochemical hydrogen peroxide (H2O2) production via two-electron oxygen reduction reaction (2e- ORR) has received increasing attention as it enables clean, sustainable, and on-site H2O2 production. Mimicking the active site structure of H2O2 production enzymes, such as nickel superoxide dismutase, is the most intuitive way to design efficient 2e- ORR electrocatalysts. However, Ni-based catalysts have thus far shown relatively low 2e- ORR activity. In this work, we present the design of high-performing, atomically dispersed Ni-based catalysts (Ni ADCs) for H2O2 production through understanding the formation chemistry of the Ni-based active sites. The use of a precoordinated precursor and pyrolysis within a confined nanospace were found to be essential for generating active Ni-N x sites in high density and increasing carbon yields, respectively. A series of model catalysts prepared from coordinating solvents having different vapor pressures gave rise to Ni ADCs with controlled ratios of Ni-N x sites and Ni nanoparticles, which revealed that the Ni-N x sites have greater 2e- ORR activity. Another set of Ni ADCs identified the important role of the degree of distortion from the square planar structure in H2O2 electrosynthesis activity. The optimized catalyst exhibited a record H2O2 electrosynthesis mass activity with excellent H2O2 selectivity.

Homogeneously Mixed Cu-Co Bimetallic Catalyst Derived from Hydroxy Double Salt for Industrial-Level High-Rate Nitrate-to-Ammonia Electrosynthesis.

Electrocatalytic nitrate reduction reaction (NO3RR) presents an innovative approach for sustainable NH3 production. However, selective NH3 production is hindered by the multiple intermediates involved in the NO3RR process and the competitive hydrogen evolution reaction. Hence, the development of highly efficient NO3RR catalysts is paramount. Herein, we report highly efficient bimetallic catalysts derived from hydroxy double salt (HDS). Under NO3RR conditions, Cu1Co1-HDS undergoes in situ reconstruction, forming nanocomposites of homogeneously distributed metallic Cu0 and Co(OH)2. Reconstruction-induced Cu0 rapidly converts NO3- to NO2-, which is further hydrogenated to NH3 by Co(OH)2. Homogeneously mixed Cu and Co species maximize this synergistic effect, achieving outstanding NO3RR performance including the highest NH3 yield rate (4.625 mmol h-1 cm-2) reported for powder-type NO3RR catalysts. Integration of Cu1Co1-HDS with a commercial Si solar cell attained 4.53% solar-to-ammonia efficiency from industrial wastewater-level concentrations of NO3- (2000 ppm), demonstrating practical application potential for solar-driven NH3 production. This study provides a strategy for enhancing the NH3 yield rate by optimizing the compositions and distributions of Cu and Co.

Unassisted Photoelectrochemical H2O2 Production with In Situ Glycerol Valorization Using α-Fe2O3.

Photoelectrochemical (PEC) H2O2 production via two-electron O2 reduction is promising for H2O2 production without emitting CO2. For PEC H2O2 production, α-Fe2O3 is an ideal semiconductor owing to its earth abundance, superior stability in water, and an appropriate band gap for efficient solar light utilization. Moreover, its conduction band is suitable for O2 reduction to produce H2O2. However, a significant overpotential for water oxidation is required due to the poor surface properties of α-Fe2O3. Thus, unassisted solar H2O2 production is not yet possible. Herein, we demonstrate unassisted PEC H2O2 production using α-Fe2O3 for the first time by applying glycerol oxidation, which requires less bias compared with water oxidation. We obtain maximum Faradaic efficiencies of 96.89 ± 0.6% and 100% for glycerol oxidation and H2O2 production, respectively, with high stability for 25 h. Our results indicate that unassisted and stable PEC H2O2 production is feasible with in situ glycerol valorization using the α-Fe2O3 photoanode.

Hydrogeological characteristics and water chemistry in a coastal aquifer of Korea: implications for land subsidence.

Land subsidence is the gradual or sudden dropping of the ground surface developed by increasing the total stress. Most studies have discussed the relationship between land subsidence with groundwater level. However, there is a lack of discussion on groundwater environmental changes after occurring land subsidence. This study aimed to evaluate the hydrogeological and water chemistry characteristics of construction sites with land subsidence. Land subsidence in the Yangyang coastal area occurred suddenly on August 3, 2022, when the retaining wall of the construction collapsed. The groundwater level was measured three times, and water samples were collected twice between August 5, 2022, and September 5, 2022, for laboratory analysis. After land subsidence occurred, the average groundwater level was - 19.91 m ground level (GL) on August 9, 2022, and finally decreased to - 19.21 m GL on September 05, 2022. The groundwater levels surrounding the construction site gradually increased for a month. The electrical conductivity value measured at the monitoring wells ranged from 89 to 7800 µS/cm, and four wells exceeded the measurement limit near the groundwater leaked points. The highest mixing ratio of leaked water samples, collected on August 9, 2022, was 27.6%. Furthermore, the fresh groundwater-saltwater interface depth was estimated to be above the construction bottom. Although groundwater levels recovered, the groundwater quality continuously is affected by saltwater. This finding could contribute to understanding the hydrogeological characteristics surrounding construction sites with land subsidence and provide insight into the hydrochemical evolution process during declined groundwater levels in coastal aquifers.

Cyber loss model risk translates to premium mispricing and risk sensitivity.

In this paper we focus on model risk and risk sensitivity when addressing the insurability of cyber risk. The standard statistical approaches to assessment of insurability and potential mispricing are enhanced in several aspects involving consideration of model risk. Model risk can arise from model uncertainty and parameter uncertainty. We demonstrate how to quantify the effect of model risk in this analysis by incorporating various robust estimators for key model parameters that apply in both marginal and joint cyber risk loss process modelling. Through this analysis we are able to address the question that, to the best of our knowledge, no other study has investigated in the context of cyber risk: is model risk present in cyber risk data, and how does is it translate into premium mispricing? We believe our findings should complement existing studies seeking to explore the insurability of cyber losses.

High-Performance Electrochemical and Photoelectrochemical Water Splitting at Neutral pH by Ir Nanocluster-Anchored CoFe-Layered Double Hydroxide Nanosheets.

Highly efficient electrocatalysts for the oxygen evolution reaction (OER) in neutral electrolytes are indispensable for practical electrochemical and photoelectrochemical water splitting technologies. However, there is a lack of good, neutral OER electrocatalysts because of the poor stability when H+ accumulates during the OER and slow OER kinetics at neutral pH. Herein, we report Ir species nanocluster-anchored, Co/Fe-layered double hydroxide (LDH) nanostructures in which the crystalline nature of LDH-restrained corrosion associated with H+ and the Ir species dramatically enhanced the OEC kinetics at neutral pH. The optimized OER electrocatalyst demonstrated a low overpotential of 323 mV (at 10 mA cm-2) and a record low Tafel slope of 42.8 mV dec-1. When it was integrated with an organic semiconductor-based photoanode, we obtained a photocurrent density of 15.2 mA cm-2 at 1.23 V versus reversible hydrogen in neutral electrolyte, which is the highest among all reported photoanodes to our knowledge.

Improving quality control in the routine practice for histopathological interpretation of gastrointestinal endoscopic biopsies using artificial intelligence.

BACKGROUND: Colorectal and gastric cancer are major causes of cancer-related deaths. In Korea, gastrointestinal (GI) endoscopic biopsy specimens account for a high percentage of histopathologic examinations. Lack of a sufficient pathologist workforce can cause an increase in human errors, threatening patient safety. Therefore, we developed a digital pathology total solution combining artificial intelligence (AI) classifier models and pathology laboratory information system for GI endoscopic biopsy specimens to establish a post-analytic daily fast quality control (QC) system, which was applied in clinical practice for a 3-month trial run by four pathologists. METHODS AND FINDINGS: Our whole slide image (WSI) classification framework comprised patch-generator, patch-level classifier, and WSI-level classifier. The classifiers were both based on DenseNet (Dense Convolutional Network). In laboratory tests, the WSI classifier achieved accuracy rates of 95.8% and 96.0% in classifying histopathological WSIs of colorectal and gastric endoscopic biopsy specimens, respectively, into three classes (Negative for dysplasia, Dysplasia, and Malignant). Classification by pathologic diagnosis and AI prediction were compared and daily reviews were conducted, focusing on discordant cases for early detection of potential human errors by the pathologists, allowing immediate correction, before the pathology report error is conveyed to the patients. During the 3-month AI-assisted daily QC trial run period, approximately 7-10 times the number of slides compared to that in the conventional monthly QC (33 months) were reviewed by pathologists; nearly 100% of GI endoscopy biopsy slides were double-checked by the AI models. Further, approximately 17-30 times the number of potential human errors were detected within an average of 1.2 days. CONCLUSIONS: The AI-assisted daily QC system that we developed and established demonstrated notable improvements in QC, in quantitative, qualitative, and time utility aspects. Ultimately, we developed an independent AI-assisted post-analytic daily fast QC system that was clinically applicable and influential, which could enhance patient safety.

Bias-free solar hydrogen production at 19.8 mA cm-2 using perovskite photocathode and lignocellulosic biomass.

Solar hydrogen production is one of the ultimate technologies needed to realize a carbon-neutral, sustainable society. However, an energy-intensive water oxidation half-reaction together with the poor performance of conventional inorganic photocatalysts have been big hurdles for practical solar hydrogen production. Here we present a photoelectrochemical cell with a record high photocurrent density of 19.8 mA cm-2 for hydrogen production by utilizing a high-performance organic-inorganic halide perovskite as a panchromatic absorber and lignocellulosic biomass as an alternative source of electrons working at lower potentials. In addition, value-added chemicals such as vanillin and acetovanillone are produced via the selective depolymerization of lignin in lignocellulosic biomass while cellulose remains close to intact for further utilization. This study paves the way to improve solar hydrogen productivity and simultaneously realize the effective use of lignocellulosic biomass.

Unassisted selective solar hydrogen peroxide production by an oxidised buckypaper-integrated perovskite photocathode.

Hydrogen peroxide (H2O2) is an eco-friendly oxidant and a promising energy source possessing comparable energy density to that of compressed H2. The current H2O2 production strategies mostly depend on the anthraquinone oxidation process, which requires significant energy and numerous organic chemicals. Photocatalyst-based solar H2O2 production comprises single-step O2 reduction to H2O2, which is a simple and eco-friendly method. However, the solar-to-H2O2 conversion efficiency is limited by the low performance of the inorganic semiconductor-based photoelectrodes and low selectivity and stability of the H2O2 production electrocatalyst. Herein, we demonstrate unassisted solar H2O2 production using an oxidised buckypaper as the H2O2 electrocatalyst combined with a high-performance inorganic-organic hybrid (perovskite) photocathode, without the need for additional bias or sacrificial agents. This integrated photoelectrode system shows 100% selectivity toward H2O2 and a solar-to-chemical conversion efficiency of ~1.463%.

Alkali-Metal-Mediated Reversible Chemical Hydrogen Storage Using Seawater.

The economic viability and systemic sustainability of a green hydrogen economy are primarily dependent on its storage. However, none of the current hydrogen storage methods meet all the targets set by the US Department of Energy (DoE) for mobile hydrogen storage. One of the most promising routes is through the chemical reaction of alkali metals with water; however, this method has not received much attention owing to its irreversible nature. Herein, we present a reconditioned seawater battery-assisted hydrogen storage system that can provide a solution to the irreversible nature of alkali-metal-based hydrogen storage. We show that this system can also be applied to relatively lighter alkali metals such as lithium as well as sodium, which increases the possibility of fulfilling the DoE target. Furthermore, we found that small (1.75 cm2) and scaled-up (70 cm2) systems showed high Faradaic efficiencies of over 94%, even in the presence of oxygen, which enhances their viability.

High-performance and stable photoelectrochemical water splitting cell with organic-photoactive-layer-based photoanode.

Considering their superior charge-transfer characteristics, easy tenability of energy levels, and low production cost, organic semiconductors are ideal for photoelectrochemical (PEC) hydrogen production. However, organic-semiconductor-based photoelectrodes have not been extensively explored for PEC water-splitting because of their low stability in water. Herein, we report high-performance and stable organic-semiconductors photoanodes consisting of p-type polymers and n-type non-fullerene materials, which is passivated using nickel foils, GaIn eutectic, and layered double hydroxides as model materials. We achieve a photocurrent density of 15.1 mA cm-2 at 1.23 V vs. reversible hydrogen electrode (RHE) with an onset potential of 0.55 V vs. RHE and a record high half-cell solar-to-hydrogen conversion efficiency of 4.33% under AM 1.5 G solar simulated light. After conducting the stability test at 1.3 V vs. RHE for 10 h, 90% of the initial photocurrent density are retained, whereas the photoactive layer without passivation lost its activity within a few minutes.

Superaerophobic hydrogels for enhanced electrochemical and photoelectrochemical hydrogen production.

The efficient removal of gas bubbles in (photo)electrochemical gas evolution reactions is an important but underexplored issue. Conventionally, researchers have attempted to impart bubble-repellent properties (so-called superaerophobicity) to electrodes by controlling their microstructures. However, conventional approaches have limitations, as they are material specific, difficult to scale up, possibly detrimental to the electrodes' catalytic activity and stability, and incompatible with photoelectrochemical applications. To address these issues, we report a simple strategy for the realization of superaerophobic (photo)electrodes via the deposition of hydrogels on a desired electrode surface. For a proof-of-concept demonstration, we deposited a transparent hydrogel assembled from M13 virus onto (photo)electrodes for a hydrogen evolution reaction. The hydrogel overlayer facilitated the elimination of hydrogen bubbles and substantially improved the (photo)electrodes' performances by maintaining high catalytic activity and minimizing the concentration overpotential. This study can contribute to the practical application of various types of (photo)electrochemical gas evolution reactions.

Unassisted solar lignin valorisation using a compartmented photo-electro-biochemical cell.

Lignin is a major component of lignocellulosic biomass. Although it is highly recalcitrant to break down, it is a very abundant natural source of valuable aromatic carbons. Thus, the effective valorisation of lignin is crucial for realising a sustainable biorefinery chain. Here, we report a compartmented photo-electro-biochemical system for unassisted, selective, and stable lignin valorisation, in which a TiO2 photocatalyst, an atomically dispersed Co-based electrocatalyst, and a biocatalyst (lignin peroxidase isozyme H8, horseradish peroxidase) are integrated, such that each system is separated using Nafion and cellulose membranes. This cell design enables lignin valorisation upon irradiation with sunlight without the need for any additional bias or sacrificial agent and allows the protection of the biocatalyst from enzyme-damaging elements, such as reactive radicals, gas bubbles, and light. The photo-electro-biochemical system is able to catalyse lignin depolymerisation with a 98.7% selectivity and polymerisation with a 73.3% yield using coniferyl alcohol, a lignin monomer.

Toward practical solar hydrogen production - an artificial photosynthetic leaf-to-farm challenge.

Solar water splitting is a promising approach to transform sunlight into renewable, sustainable and green hydrogen energy. There are three representative ways of transforming solar radiation into molecular hydrogen, which are the photocatalytic (PC), photoelectrochemical (PEC), and photovoltaic-electrolysis (PV-EC) routes. Having the future perspective of green hydrogen economy in mind, this review article discusses devices and systems for solar-to-hydrogen production including comparison of the above solar water splitting systems. The focus is placed on a critical assessment of the key components needed to scale up PEC water splitting systems such as materials efficiency, cost, elemental abundancy, stability, fuel separation, device operability, cell architecture, and techno-economic aspects of the systems. The review follows a stepwise approach and provides (i) a summary of the basic principles and photocatalytic materials employed for PEC water splitting, (ii) an extensive discussion of technologies, procedures, and system designs, and (iii) an introduction to international demonstration projects, and the development of benchmarked devices and large-scale prototype systems. The task of scaling up of laboratory overall water splitting devices to practical systems may be called "an artificial photosynthetic leaf-to-farm challenge".

Tailorable Au Nanoparticles Embedded in Epitaxial TiO2 Thin Films for Tunable Optical Properties.

The unique property of plasmonic materials to localize light into deep sub-wavelength regime has greatly driven various applications in the field of photovoltaics, sensors, and photocatalysis. Here, we demonstrate the one-step growth of an oxide-metal hybrid thin film incorporating well-dispersed gold (Au) nanoparticles (NPs) with tailorable particle shape and diameters (ranging from 2 to 20 nm) embedded in highly epitaxial TiO2 matrix, deposited using pulsed laser deposition. Incorporation of Au NPs reduces the band gap of TiO2 and enhances light absorption in the visible regime owing to the excitation of localized surface plasmons. Optical properties, including the plasmonic response and permittivity, and photocatalytic activities of the Au-TiO2 hybrid materials are effectively tuned as a function of the Au NP sizes. Such optical property tuning is well captured using full-field simulations and the effective medium theory for better understanding of the physical phenomena. The tailorable shape and size of Au NPs embedded in TiO2 matrix present a novel oxide-metal hybrid material platform for optical property tuning and highly efficient plasmonic properties for future oxide-based photocatalytic sensors and devices.

Strong O 2p-Fe 3d Hybridization Observed in Solution-Grown Hematite Films by Soft X-ray Spectroscopies.

Photoelectrochemical (PEC) water splitting holds the potential as a direct route for solar energy conversation and storage. The performance of a PEC device is strongly influenced by the electronic properties of the photonanode surface. It has been shown that the synthesis methods can have a profound impact on the electronic properties and PEC performance of various photoelectrode materials such as hematite. Soft X-ray spectroscopic techniques, including O K-edge XAS and Fe L-edge XAS/XES, have been employed to investigate how the synthesis methods impact the electronic structure of resulting hematite materials. It is found that the hematite samples via solution regrowth methods show dramatically increased 3d-4sp band ratios in O K-edge XAS spectra and decreased relative elastic peak intensities in Fe L-edge RIXS spectra compared with samples synthesized via ALD or solution grown. The difference observed in O-K and Fe-L spectra indicated that solution regrowth strategy alters the O 2p-Fe 3d hybridization and hence the electronic structure of the hematite films, which proves to be beneficial for PEC performance of the hematite photoanode. Our findings provided new insights and potentially useful strategies for enhancing the PEC performance of photoanode materials.

Hetero-type dual photoanodes for unbiased solar water splitting with extended light harvesting.

Metal oxide semiconductors are promising photoelectrode materials for solar water splitting due to their robustness in aqueous solutions and low cost. Yet, their solar-to-hydrogen conversion efficiencies are still not high enough for practical applications. Here we present a strategy to enhance the efficiency of metal oxides, hetero-type dual photoelectrodes, in which two photoanodes of different bandgaps are connected in parallel for extended light harvesting. Thus, a photoelectrochemical device made of modified BiVO4 and α-Fe2O3 as dual photoanodes utilizes visible light up to 610 nm for water splitting, and shows stable photocurrents of 7.0±0.2 mA cm-2 at 1.23 VRHE under 1 sun irradiation. A tandem cell composed with the dual photoanodes-silicon solar cell demonstrates unbiased water splitting efficiency of 7.7%. These results and concept represent a significant step forward en route to the goal of >10% efficiency required for practical solar hydrogen production.

Self-Assembled Heteroepitaxial Oxide Nanocomposite for Photoelectrochemical Solar Water Oxidation.

We report on spontaneously phase ordered heteroepitaxial SrTiO3 (STO):ZnFe2O4 (ZFO) nanocomposite films that give rise to strongly enhanced photoelectrochemical solar water oxidation, consistent with enhanced photoinduced charge separation. The STO:ZFO nanocomposite yielded an enhanced photocurrent density of 0.188 mA/cm2 at 1.23 V vs a reversible hydrogen electrode, which was 7.9- and 2.6-fold higher than that of the plain STO film and ZFO film cases under 1-sun illumination, respectively. The photoelectrode also produced stable photocurrent and Faradaic efficiencies of H2 and O2 formation that were more than 90%. Incident-photon-to-current-conversion efficiency measurements, Tauc plots, Mott-Schottky plots, and electrochemical impedance spectroscopy measurements proved that the strongly enhanced photogenerated charge separation resulted from vertically aligned pseudosingle crystalline components, epitaxial heterojunctions, and a staggered band alignment of the components of the nanocomposite films. This study presents a completely new avenue for efficient solar energy conversion applications.

Understanding the origin of photoelectrode performance enhancement by probing surface kinetics.

Photoelectrochemical (PEC) water splitting holds the potential to meet the challenges associated with the intermittent nature of sunlight. Catalysts have often been shown to improve the performance of PEC water splitting, but their working mechanisms are not well understood. Using intensity modulated photocurrent spectroscopy (IMPS), we determined the rate constants of water oxidation and recombination at the surface of three different hematite-based photoanodes. It was found that the best performing electrodes, in terms of photocurrent onset potential, exhibited the slowest water oxidation rate constants, which was a surprise. The performance of these photoelectrodes was enabled by the slow surface recombination. When amorphous NiFeO x , a water oxidation catalyst, was present, the rate of surface hole transfer actually slowed down; what was slowed more was the recombination rate at the hematite surface, resulting in better water oxidation performance. As such, NiFeO x primarily serves as a passivation layer rather than a catalytic layer. Together a better understanding of the role of catalytic overlayers for water oxidation has been achieved.

Defective ZnFe2O4 nanorods with oxygen vacancy for photoelectrochemical water splitting.

A one-dimensional zinc ferrite (ZnFe2O4) nanorod photoanode was prepared by a simple solution method on the F-doped tin oxide glass substrate. Thermal treatment under a hydrogen or vacuum atmosphere improved the photoelectrochemical water oxidation activity up to 20 times. The various physical characterization techniques used revealed that oxygen vacancies were created by the treatments in the near surface region, which increased the donor density and passivated the surface states. Hydrogen treatment was more effective and it was important to find optimum treatment conditions to take advantage of the positive role of oxygen vacancy as a source of electron donors and avoid its negative effect as electron trap sites.