Optical trapping microrheology in cultured human cells.

We present the microrheological study of the two close human epithelial cell lines: non-cancerous HCV29 and cancerous T24. The optical tweezers tracking was applied to extract the several seconds long trajectories of endogenous lipid granules at time step of 1µs. They were analyzed using a recently proposed equation for mean square displacement (MSD) in the case of subdiffusion influenced by an optical trap. This equation leads to an explicit form for viscoelastic moduli. The moduli of the two cell lines were found to be the same within the experimental accuracy for frequencies 10(2) - 10(5) Hz. For both cell lines subdiffusion was observed with the exponent close to 3/4, the value predicted by the theory of semiflexible polymers. For times longer than 0.1s the MSD of cancerous cells exceeds the MSD of non-cancerous cells for all values of the trapping force. Such behavior can be interpreted as a signature of the active processes and prevents the extraction of the low-frequency viscoelastic moduli for the living cells by passive microrheology.

Evidence of lipid peroxidation and protein phosphorylation in cells upon oxidative stress photo-generated by fullerols.

An oxidative stress (OS) state is characterized by the generation of Reactive Oxygen Species (ROS) in a biological system above its capacity to counterbalance them [1]. Exposure to OS induces the accumulation of intracellular ROS, which in turn causes cell damage in the form of protein, lipid, and/or DNA oxidations. Such conditions are believed to be linked to numerous diseases or simply to the ageing of tissues. However, the controlled generation of ROS via photosensitizing drugs or photosensitizers (PS) is now widely used to treat various tumors and other infections [2,3]. Here we present a method to track the chemical changes in a cell after exposure to oxidative stress. OS is induced via fullerols, a custom made water soluble derivative of fullerene (C(60)), under visible light illumination. Synchrotron-based Fourier Transform InfraRed Microspectroscopy (S-FTIRM) was used to assess the chemical makeup of single cells after OS exposure. Consequently, a chemical fingerprint of oxidative stress was probed in this study through an increase in the bands linked with lipid peroxidation (carbonyl ester group at 1740 cm(-1)) and protein phosphorylation (asymmetric phosphate stretching at 1240 cm(-1)).

Intracellular nanomanipulation by a photonic-force microscope with real-time acquisition of a 3D stiffness matrix.

A traditional photonic-force microscope (PFM) results in huge sets of data, which requires tedious numerical analysis. In this paper, we propose instead an analog signal processor to attain real-time capabilities while retaining the richness of the traditional PFM data. Our system is devoted to intracellular measurements and is fully interactive through the use of a haptic joystick. Using our specialized analog hardware along with a dedicated algorithm, we can extract the full 3D stiffness matrix of the optical trap in real time, including the off-diagonal cross-terms. Our system is also capable of simultaneously recording data for subsequent offline analysis. This allows us to check that a good correlation exists between the classical analysis of stiffness and our real-time measurements. We monitor the PFM beads using an optical microscope. The force-feedback mechanism of the haptic joystick helps us in interactively guiding the bead inside living cells and collecting information from its (possibly anisotropic) environment. The instantaneous stiffness measurements are also displayed in real time on a graphical user interface. The whole system has been built and is operational; here we present early results that confirm the consistency of the real-time measurements with offline computations.

Exploring the mechanical properties of single vimentin intermediate filaments by atomic force microscopy.

Intermediate filaments (IFs), together with actin filaments and microtubules, compose the cytoskeleton. Among other functions, IFs impart mechanical stability to cells when exposed to mechanical stress and act as a support when the other cytoskeletal filaments cannot keep the structural integrity of the cells. Here we present a study on the bending properties of single vimentin IFs in which we used an atomic force microscopy (AFM) tip to elastically deform single filaments hanging over a porous membrane. We obtained a value for the bending modulus of non-stabilized IFs between 300 MPa and 400 MPa. Our results together with previous ones suggest that IFs present axial sliding between their constitutive building blocks and therefore have a bending modulus that depends on the filament length. Measurements of glutaraldehyde-stabilized filaments were also performed to reduce the axial sliding between subunits and therefore provide a lower limit estimate of the Young's modulus of the filaments. The results show an increment of two to three times in the bending modulus for the stabilized IFs with respect to the non-stabilized ones, suggesting that the Young's modulus of vimentin IFs should be around 900 MPa or higher.

Direct observation of nondiffusive motion of a Brownian particle.

The thermal position fluctuations of a single micron-sized sphere immersed in a fluid were recorded by optical trapping interferometry with nanometer spatial and microsecond temporal resolution. We find, in accord with the theory of Brownian motion including hydrodynamic memory effects, that the transition from ballistic to diffusive motion is delayed to significantly longer times than predicted by the standard Langevin equation. This delay is a consequence of the inertia of the fluid. On the shortest time scales investigated, the sphere's inertia has a small, but measurable, effect.

Understanding intercellular interactions and cell adhesion: lessons from studies on protein-metal interactions.

To understand cell-cell interactions and the interactions of cells to non-biological materials, studies on binding forces between cellular proteins and between proteins and non-biological material such as metal surfaces are essential. The adsorption of proteins to solid-water interfaces is a multifactorial and a multistep process. First steps are determined by long-range interactions where surface properties such as hydrophobicity, distribution of charged groups, ion concentrations and pH play important roles. In later steps structural rearrangements in the protein molecule and dehydration effects become more important making the adsorption process often irreversible. In the following we demonstrate that protein A and tubulin have a specific type of interaction to metal surfaces probably as an intermediate step in the adsorption process. The proteins were attached to the tip of a microfabricated cantilever in such a way that only one molecule interacts with the surface. By recording force-distance curves with an atomic force microscope the adhesion forces of single molecules binding to gold, titanium and indium-tinoxid surfaces were measured.