RESUMEN
Instrumented mouthguards (iMGs) are widely applied to measure head acceleration event (HAE) exposure in sports. Despite laboratory validation, on-field factors including potential sensor skull-decoupling and spurious recordings limit data accuracy. Video analysis can provide complementary information to verify sensor data but lacks quantitative kinematics reference information and suffers from subjectivity. The purpose of this study was to develop a rigorous multi-stage screening procedure, combining iMG and video as independent measurements, aimed at improving the quality of on-field HAE exposure measurements. We deployed iMGs and gathered video recordings in a complete university men's ice hockey varsity season. We developed a four-stage process that involves independent video and sensor data collection (Stage I), general screening (Stage II), cross verification (Stage III), and coupling verification (Stage IV). Stage I yielded 24,596 iMG acceleration events (AEs) and 17,098 potential video HAEs from all games. Approximately 2.5% of iMG AEs were categorized as cross-verified and coupled iMG HAEs after Stage IV, and less than 1/5 of confirmed or probable video HAEs were cross-verified with iMG data during stage III. From Stage I to IV, we observed lower peak kinematics (median peak linear acceleration from 36.0 to 10.9 g; median peak angular acceleration from 3922 to 942 rad/s2) and reduced high-frequency signals, indicative of potential reduction in kinematic noise. Our study proposes a rigorous process for on-field data screening and provides quantitative evidence of data quality improvements using this process. Ensuring data quality is critical in further investigation of potential brain injury risk using HAE exposure data.
RESUMEN
OBJECTIVE: Impact kinematics are widely employed to investigate mechanisms of traumatic brain injury (TBI). However, they are susceptible to noise and artefacts; thus, require data filtering. Few studies have focused on how data filtering affects brain strain most relevant to TBI. Here, we report that impact-induced brain strains are much less sensitive to data filtering than kinematics based on three filtering methods: CFC180, lowpass 200 Hz, and a new method called Head Exposure to Acceleration Database in Sport (HEADSport). METHODS: Using mouthguard-measured head impacts in elite rugby (N = 5694), average Euclidean distances between the three filtered angular velocity profiles and their unfiltered counterparts are used to identify three groups of impacts with large variations: 90-95th, 95-99th, and >99th percentile. From each group, 20 impacts are randomly selected for simulation using the anisotropic Worcester Head Injury Model (WHIM) V1.0. RESULTS AND CONCLUSION: HEADSport and CFC180 are the most and least effective, respectively, in suppressing "unphysical artefacts" shown as sharp spikes with a rather short impulse duration (e.g., <3 ms) in angular velocity. However, maximum principal strain (MPS), especially that in the corpus callosum, is much less sensitive to data filtering compared to kinematic peaks (e.g., reduction of 3% vs. 47% and 90% for peak angular velocity and acceleration with HEADSport for impacts of >99th percentile). SIGNIFICANCE: These findings confirm that the brain acts as a low-pass filter, itself, to suppress high frequency noise in impact kinematics. Therefore, brain strain can serve as a common metric for TBI biomechanical studies to maximize relevance to the injury, as it is not sensitive to kinematic filters.
Asunto(s)
Encéfalo , Fútbol Americano , Humanos , Fenómenos Biomecánicos/fisiología , Fútbol Americano/lesiones , Fútbol Americano/fisiología , Encéfalo/fisiología , Aceleración , Procesamiento de Señales Asistido por Computador , Lesiones Traumáticas del Encéfalo/fisiopatología , Masculino , Traumatismos en Atletas/fisiopatología , Protectores BucalesRESUMEN
Contemporary biomechanical modeling of traumatic brain injury (TBI) focuses on either the global brain as an organ or a representative tiny section of a single axon. In addition, while it is common for a global brain model to employ real-world impacts as input, axonal injury models have largely been limited to inputs of either tension or compression with assumed peak strain and strain rate. These major gaps between global and microscale modeling preclude a systematic and mechanistic investigation of how tissue strain from impact leads to downstream axonal damage throughout the white matter. In this study, a unique subject-specific multimodality dataset from a male ice-hockey player sustaining a diagnosed concussion is used to establish an efficient and scalable computational pipeline. It is then employed to derive voxelized brain deformation, maximum principal strains and white matter fiber strains, and finally, to produce diverse fiber strain profiles of various shapes in temporal history necessary for the development and application of a deep learning axonal injury model in the future. The pipeline employs a structured, voxelized representation of brain deformation with adjustable spatial resolution independent of model mesh resolution. The method can be easily extended to other head impacts or individuals. The framework established in this work is critical for enabling large-scale (i.e., across the entire white matter region, head impacts, and individuals) and multiscale (i.e., from organ to cell length scales) modeling for the investigation of traumatic axonal injury (TAI) triggering mechanisms. Ultimately, these efforts could enhance the assessment of concussion risks and design of protective headgear. Therefore, this work contributes to improved strategies for concussion detection, mitigation, and prevention.
Asunto(s)
Conmoción Encefálica , Lesiones Traumáticas del Encéfalo , Masculino , Humanos , Conmoción Encefálica/diagnóstico por imagen , Lesiones Traumáticas del Encéfalo/diagnóstico por imagen , Encéfalo/diagnóstico por imagen , Axones , CabezaRESUMEN
The large amount of training samples required to develop a deep learning brain injury model demands enormous computational resources. Here, we study how a transformer neural network (TNN) of high accuracy can be used to efficiently generate pretraining samples for a convolutional neural network (CNN) brain injury model to reduce computational cost. The samples use synthetic impacts emulating real-world events or augmented impacts generated from limited measured impacts. First, we verify that the TNN remains highly accurate for the two impact types (N = 100 each; [Formula: see text] of 0.948-0.967 with root mean squared error, RMSE, ~ 0.01, for voxelized peak strains). The TNN-estimated samples (1000-5000 for each data type) are then used to pretrain a CNN, which is further finetuned using directly simulated training samples (250-5000). An independent measured impact dataset considered of complete capture of impact event is used to assess estimation accuracy (N = 191). We find that pretraining can significantly improve CNN accuracy via transfer learning compared to a baseline CNN without pretraining. It is most effective when the finetuning dataset is relatively small (e.g., 2000-4000 pretraining synthetic or augmented samples improves success rate from 0.72 to 0.81 with 500 finetuning samples). When finetuning samples reach 3000 or more, no obvious improvement occurs from pretraining. These results support using the TNN to rapidly generate pretraining samples to facilitate a more efficient training strategy for future deep learning brain models, by limiting the number of costly direct simulations from an alternative baseline model. This study could contribute to a wider adoption of deep learning brain injury models for large-scale predictive modeling and ultimately, enhancing safety protocols and protective equipment.
RESUMEN
Existing axonal finite element models do not consider sex morphological differences or the fidelity in dynamic input. To facilitate a systematic investigation into the micromechanics of diffuse axonal injury, we develop a parameterized modeling approach for automatic and efficient generation of sex-specific axonal models according to specified geometrical parameters. Baseline female and male axonal models in the corpus callosum with random microtubule (MT) gap configurations are generated for model calibration and evaluation. They are then used to simulate a realistic tensile loading consisting of both a loading and a recovery phase (to return to an initial undeformed state) generated from dynamic corpus callosum fiber strain in a real-world head impact simulation. We find that MT gaps and the dynamic recovery phase are both critical to successfully reproduce MT undulation as observed experimentally, which has not been reported before. This strengthens confidence in model dynamic responses. A statistical approach is further employed to aggregate axonal responses from a large sample of random MT gap configurations for both female and male axonal models (n = 10,000 each). We find that peak strains in MTs and the Ranvier node and associated neurofilament failures in female axons are substantially higher than those in male axons because there are fewer MTs in the former and also because of the random nature of MT gap locations. Despite limitations in various model assumptions as a result of limited experimental data currently available, these findings highlight the need to systematically characterize MT gap configurations and to ensure a realistic model input for axonal dynamic simulations. Finally, this study may offer fresh and improved insight into the biomechanical basis of sex differences in brain injury, and sets the stage for more systematic investigations at the microscale in the future, both numerically and experimentally.
Asunto(s)
Lesiones Encefálicas , Caracteres Sexuales , Femenino , Masculino , Humanos , Análisis de Elementos Finitos , Axones/fisiología , Nódulos de RanvierRESUMEN
The advent of mobile devices, wearables and digital healthcare has unleashed a demand for accurate, reliable, and non-interventional ways to measure continuous blood pressure (BP). Many consumer products claim to measure BP with a cuffless device, but their lack of accuracy and reliability limit clinical adoption. Here, we demonstrate how multimodal feature datasets, comprising: (i) pulse arrival time (PAT); (ii) pulse wave morphology (PWM), and (iii) demographic data, can be combined with optimized Machine Learning (ML) algorithms to estimate Systolic BP (SBP), Diastolic BP (DBP) and Mean Arterial Pressure (MAP) within a 5 mmHg bias of the gold standard Intra-Arterial BP, well within the acceptable limits of the IEC/ANSI 80601-2-30 (2018) standard. Furthermore, DBP's calculated using 126 datasets collected from 31 hemodynamically compromised patients had a standard deviation within 8 mmHg, while SBP's and MAP's exceeded these limits. Using ANOVA and Levene's test for error means and standard deviations, we found significant differences in the various ML algorithms but found no significant differences amongst the multimodal feature datasets. Optimized ML algorithms and key multimodal features obtained from larger real-world data (RWD) sets could enable more reliable and accurate estimation of continuous BP in cuffless devices, accelerating wider clinical adoption.
Asunto(s)
Determinación de la Presión Sanguínea , Fotopletismografía , Humanos , Presión Sanguínea/fisiología , Reproducibilidad de los Resultados , Algoritmos , Aprendizaje Automático , Análisis de la Onda del PulsoRESUMEN
The brain injury modeling community has recommended improving model subject specificity and simulation efficiency. Here, we extend an instantaneous (< 1 sec) convolutional neural network (CNN) brain model based on the anisotropic Worcester Head Injury Model (WHIM) V1.0 to account for strain differences due to individual morphological variations. Linear scaling factors relative to the generic WHIM along the three anatomical axes are used as additional CNN inputs. To generate training samples, the WHIM is randomly scaled to pair with augmented head impacts randomly generated from real-world data for simulation. An estimation of voxelized peak maximum principal strain of the whole-brain is said to be successful when the linear regression slope and Pearson's correlation coefficient relative to directly simulated do not deviate from 1.0 (when identical) by more than 0.1. Despite a modest training dataset (N = 1363 vs. â¼5.7 k previously), the individualized CNN achieves a success rate of 86.2% in cross-validation for scaled model responses, and 92.1% for independent generic model testing for impacts considered as complete capture of kinematic events. Using 11 scaled subject-specific models (with scaling factors determined from pre-established regression models based on head dimensions and sex and age information, and notably, without neuroimages), the morphologically individualized CNN remains accurate for impacts that also yield successful estimations for the generic WHIM. The individualized CNN instantly estimates subject-specific and spatially detailed peak strains of the entire brain and thus, supersedes others that report a scalar peak strain value incapable of informing the location of occurrence. This tool could be especially useful for youths and females due to their anticipated greater morphological differences relative to the generic model, even without the need for individual neuroimages. It has potential for a wide range of applications for injury mitigation purposes and the design of head protective gears. The voxelized strains also allow for convenient data sharing and promote collaboration among research groups.
Asunto(s)
Lesiones Encefálicas , Aprendizaje Profundo , Femenino , Adolescente , Humanos , Redes Neurales de la Computación , Simulación por Computador , Fenómenos BiomecánicosRESUMEN
Most human head/brain models represent a generic adult male head/brain. They may suffer in accuracy when investigating traumatic brain injury (TBI) on a subject-specific basis. Subject-specific models can be developed from neuroimages; however, neuroimages are not typically available in practice. In this study, we establish simple and elegant regression models between brain outer surface morphology and head dimensions measured from neuroimages along with age and sex information (N = 191; 141 males and 50 females with age ranging 14-25 years). The regression models are then used to approximate subject-specific brain models by scaling a generic counterpart, without using neuroimages. Model geometrical accuracy is assessed using adjusted [Formula: see text] and absolute percentage error (e.g., 0.720 and 3.09 ± 2.38%, respectively, for brain volume when incorporating tragion-to-top). For a subset of 11 subjects (from smallest to largest in brain volume), impact-induced brain strains are compared with those from "morphed models" derived from neuroimage-based mesh warping. We find that regional peak strains from the scaled subject-specific models are comparable to those of the morphed counterparts but could be considerably different from those of the generic model (e.g., linear regression slope of 1.01-1.03 for gray and white matter regions versus 1.16-1.19, or up to ~ 20% overestimation for the smallest brain studied). These results highlight the importance of incorporating brain morphological variations in impact simulation and demonstrate the feasibility of approximating subject-specific brain models without neuroimages using age, sex, and easily measurable head dimensions. The scaled models may improve subject specificity for future TBI investigations.
Asunto(s)
Lesiones Traumáticas del Encéfalo , Lesiones Encefálicas , Sustancia Blanca , Femenino , Masculino , Humanos , Adolescente , Adulto Joven , Adulto , Encéfalo , CabezaRESUMEN
Head acceleration measurement sensors are now widely deployed in the field to monitor head kinematic exposure in contact sports. The wealth of impact kinematics data provides valuable, yet challenging, opportunities to study the biomechanical basis of mild traumatic brain injury (mTBI) and subconcussive kinematic exposure. Head impact kinematics are translated into brain mechanical responses through physics-based computational simulations using validated brain models to study the mechanisms of injury. First, this article reviews representative legacy and contemporary brain biomechanical models primarily used for blunt impact simulation. Then, it summarizes perspectives regarding the development and validation of these models, and discusses how simulation results can be interpreted to facilitate injury risk assessment and head acceleration exposure monitoring in the context of contact sports. Recommendations and consensus statements are presented on the use of validated brain models in conjunction with kinematic sensor data to understand the biomechanics of mTBI and subconcussion. Mainly, there is general consensus that validated brain models have strong potential to improve injury prediction and interpretation of subconcussive kinematic exposure over global head kinematics alone. Nevertheless, a major roadblock to this capability is the lack of sufficient data encompassing different sports, sex, age and other factors. The authors recommend further integration of sensor data and simulations with modern data science techniques to generate large datasets of exposures and predicted brain responses along with associated clinical findings. These efforts are anticipated to help better understand the biomechanical basis of mTBI and improve the effectiveness in monitoring kinematic exposure in contact sports for risk and injury mitigation purposes.
Asunto(s)
Conmoción Encefálica , Deportes , Humanos , Aceleración , Cabeza/fisiología , Fenómenos Biomecánicos , EncéfaloRESUMEN
Brain strain is increasingly being used in helmet design and safety performance evaluation as it is generally considered as the primary mechanism of concussion. In this study, we investigate whether different helmet designs can meaningfully alter brain strains using two commonly used metrics, peak maximum principal strain (MPS) of the whole brain and cumulative strain damage measure (CSDM). A convolutional neural network (CNN) that instantly produces detailed brain strains is first tested for accuracy for helmeted head impacts. Based on N = 144 impacts in 12 impact conditions from three random and representative helmet models, we conclude that the CNN is sufficiently accurate for helmet testing applications, for elementwise MPS (success rate of 98.6%), whole-brain peak MPS and CSDM (coefficient of determination of 0.977 and 0.980, with root mean squared error of 0.015 and 0.029, respectively). We then apply the technique to 23 football helmet models (N = 1104 impacts) to reproduce elementwise MPS. Assuming a concussion would occur when peak MPS or CSDM exceeds a threshold, we sweep their thresholds across the value ranges to evaluate the number of predicted hypothetical concussions that different helmets sustain across the impact conditions. Relative to the 12 impact conditions tested, we find that the "best" and "worst" helmets differ by an average of 22.5% in terms of predicted concussions, ranging from 0 to 42% (the latter achieved at the threshold value of 0.28 for peak MPS and 0.4 for CSDM, respectively). Such a large variation among helmets in strain-based concussion predictions demonstrate that helmet designs can still be optimized in a clinically meaningful way. The robustness and accuracy of the CNN tool also suggest its potential for routine use for helmet design and safety performance evaluation in the future. The CNN is freely available online at https://github.com/Jilab-biomechanics/CNN-brain-strains .
Asunto(s)
Conmoción Encefálica , Fútbol Americano , Humanos , Dispositivos de Protección de la Cabeza , Fenómenos Biomecánicos , Conmoción Encefálica/prevención & control , Encéfalo , AceleraciónRESUMEN
Real-time dynamic simulation remains a significant challenge for spatiotemporal data of high dimension and resolution. In this study, we establish a transformer neural network (TNN) originally developed for natural language processing and a separate convolutional neural network (CNN) to estimate five-dimensional (5D) spatiotemporal brain-skull relative displacement resulting from impact (isotropic spatial resolution of 4 mm with temporal resolution of 1 ms). Sequential training is applied to train (N = 5184 samples) the two neural networks for estimating the complete 5D displacement across a temporal duration of 60 ms. We find that TNN slightly but consistently outperforms CNN in accuracy for both displacement and the resulting voxel-wise four-dimensional (4D) maximum principal strain (e.g., root mean squared error (RMSE) of ~1.0% vs. ~1.6%, with coefficient of determination, R 2 >0.99 vs. >0.98, respectively, and normalized RMSE (NRMSE) at peak displacement of 2%-3%, based on an independent testing dataset; N = 314). Their accuracies are similar for a range of real-world impacts drawn from various published sources (dummy, helmet, football, soccer, and car crash; average RMSE/NRMSE of ~0.3 mm/~4%-5% and average R 2 of ~0.98 at peak displacement). Sequential training is effective for allowing instantaneous estimation of 5D displacement with high accuracy, although TNN poses a heavier computational burden in training. This work enables efficient characterization of the intrinsically dynamic brain strain in impact critical for downstream multiscale axonal injury model simulation. This is also the first application of TNN in biomechanics, which offers important insight into how real-time dynamic simulations can be achieved across diverse engineering fields.
RESUMEN
Change in vertebral position between preoperative imaging and the surgical procedure reduces the accuracy of image-guided spinal surgery, requiring repeated imaging and surgical field registration, a process that takes time and exposes patients to additional radiation. We developed a handheld, camera-based, deformable registration system (intraoperative stereovision, iSV) to register the surgical field automatically and compensate for spinal motion during surgery without further radiation exposure. Methods: We measured motion-induced errors in image-guided lumbar pedicle screw placement in 6 whole-pig cadavers using state-of-the-art commercial spine navigation (StealthStation; Medtronic) and iSV registration that compensates for intraoperative vertebral motion. We induced spinal motion by using preoperative computed tomography (pCT) of the lumbar spine performed in the supine position with accentuated lordosis and performing surgery with the animal in the prone position. StealthStation registration of pCT occurred using metallic fiducial markers implanted in each vertebra, and iSV data were acquired to perform a deformable registration between pCT and the surgical field. Sixty-eight pedicle screws were placed in 6 whole-pig cadavers using iSV and StealthStation registrations in random order of vertebral level, relying only on image guidance without invoking the surgeon's judgment. The position of each pedicle screw was assessed with post-procedure CT and confirmed via anatomical dissection. Registration errors were assessed on the basis of implanted fiducials. Results: The frequency and severity of pedicle screw perforation were lower for iSV registration compared with StealthStation (97% versus 68% with Grade 0 medial perforation for iSV and StealthStation, respectively). Severe perforation occurred only with StealthStation (18% versus 0% for iSV). The overall time required for iSV registration (computational efficiency) was â¼10 to 15 minutes and was comparable with StealthStation registration (â¼10 min). The mean target registration error was smaller for iSV relative to StealthStation (2.81 ± 0.91 versus 8.37 ± 1.76 mm). Conclusions: Pedicle screw placement was more accurate with iSV registration compared with state-of-the-art commercial navigation based on preoperative CT when alignment of the spine changed during surgery. Clinical Relevance: The iSV system compensated for intervertebral motion, which obviated the need for repeated vertebral registration while providing efficient, accurate, radiation-free navigation during open spinal surgery.
RESUMEN
Tissue-level brain responses to sport-related head impacts may be stronger predictors of brain injury risk than head kinematics alone. Despite the importance of accurate impact response estimation, the influence of head morphological variations has not been properly considered due to the limited sizes and shapes of existing computational head models. In this study, we developed 101 subject-specific finite element (FE) head-brain models based on CT scans and a parametric modeling approach to estimate tissue-level brain impact responses (maximal principal strain, MPS) under three head impact conditions. Principal component analysis (PCA) was used to quantify the geometric variations, with statistically significant PCs then selected to predict MPS using a stepwise linear regression model. High adjusted R2 values (0.6-0.9) were achieved in the regression model, suggesting a good model predictability. Brain volume explained the largest variance of 51.3%, and it was highly correlated with MPS, indicating a significant size effect on brain impact responses. This is the first modeling study to systematically consider the influence of morphological variations in the inner skull and scalp on brain tissue impact response.
Asunto(s)
Lesiones Encefálicas , Cabeza , Adolescente , Fenómenos Biomecánicos , Encéfalo , Análisis de Elementos Finitos , Cabeza/fisiología , Humanos , Cráneo , Adulto JovenRESUMEN
BACKGROUND AND OBJECTIVE: It is common to combine biomechanical modeling and medical images for multimodal analyses. However, mesh-image mismatch may occur that prevents direct information exchange. To eliminate mesh-image mismatch, we develop a simple but elegant displacement voxelization technique based on image voxel corner nodes to achieve voxel-wise strain. We then apply the technique to derive dense white matter fiber strains along whole-brain tractography (â¼35 k fiber tracts consisting of â¼3.3 million sampling points) resulting from head impact. METHODS: Displacements at image voxel corner nodes are first obtained from model simulation via scattered interpolation. Each voxel is then scaled linearly to form a unit hexahedral element. This allows convenient and efficient voxel-wise strain tensor calculation and displacement interpolation at arbitrary fiber sampling points via shape functions. Fiber strains from displacement interpolation are then compared with those from the commonly used strain tensor projection using either voxel- or element-wise strain tensors. RESULTS: Based on a synthetic displacement field, fiber strains interpolated from voxelized displacement are considerably more accurate than those from strain tensor projection relative to the prescribed ground-truth (determinant of coefficient (R2) of 1.00 and root mean squared error (RMSE) of 0.01 vs. 0.87 and 0.10, respectively). For a set of real-world reconstructed head impacts (N = 53), the strain tensor projection method performs similarly poorly (R2 of 0.80-0.90 and RMSE of 0.03-0.07), with overestimation strongly correlated with strain magnitude (Pearson correlation coefficient >0.9). Up to â¼15% of the fiber strains are overestimated by more than the lower bound of a conservative injury threshold of 0.09. The percentage increases to â¼37% when halving the threshold. Voxel interpolation is also significantly more efficient (15 s vs. 40 s for element strain tensor projection, without parallelization). CONCLUSIONS: Voxelized displacement interpolation is considerably more accurate and efficient in deriving dense white matter fiber strains than strain tensor projection. The latter generally overestimates with overestimation magnitude strongly correlating with fiber strain magnitude. Displacement voxelization is an effective technique to eliminate mesh-image mismatch and generates a convenient image representation of tissue deformation. This technique can be generalized to broadly facilitate a diverse range of image-related biomechanical problems for multimodal analyses. The convenient image format may also promote and facilitate biomechanical data sharing in the future.
Asunto(s)
Procesamiento de Imagen Asistido por Computador , Sustancia Blanca , Encéfalo/diagnóstico por imagen , Imagen de Difusión por Resonancia Magnética , Imagen de Difusión Tensora , Sustancia Blanca/diagnóstico por imagenRESUMEN
Cerebral vascular injury (CVI) is a frequent consequence of traumatic brain injury but has often been neglected. Substantial experimental work exists on vascular material properties and failure/subfailure thresholds. However, little is known about vascular in vivo loading conditions in dynamic head impact, which is necessary to investigate the risk, severity, and extent of CVI. In this study, we resort to the Worcester Head Injury Model (WHIM) V2.1 for investigation. The model embeds the cerebral vasculature network and is further upgraded to incorporate brain material property heterogeneity based on magnetic resonance elastography. The brain material property is calibrated to match with the previously validated anisotropic V1.0 version in terms of whole-brain strains against six experimental datasets of a wide range of blunt impact conditions. The upgraded WHIM is finally used to simulate five representative real-world head impacts drawn from contact sports and automotive crashes. We find that peak strains in veins are considerably higher than those in arteries and that peak circumferential strains are also higher than peak axial strains. For a typical concussive head impact, cerebral vascular axial strains reach the lowest reported yield strain of â¼7-8%. For severe automotive impacts, axial strains could reach â¼20%, which is on the order of the lowest reported ultimate failure strain of â¼24%. These results suggest in vivo mechanical loading conditions of the cerebral vasculature (excluding bridging veins not assessed here) due to rapid head rotation are at the lower end of failure/subfailure thresholds established from ex vivo experiments. This study provides some first insight into the risk, severity, and extent of CVI in real-world head impacts.
Asunto(s)
Conmoción Encefálica , Lesiones Encefálicas , Traumatismos Craneocerebrales , Encéfalo , Cabeza , HumanosRESUMEN
Conventional kinematics-based brain injury metrics often approximate peak maximum principal strain (MPS) of the whole brain but ignore the anatomical location of occurrence. In this study, we develop effective impact kinematics consisting of peak rotational velocity and the associated rotational axis to preserve not only peak MPS but also spatially detailed MPS. A pre-computed brain response atlas (pcBRA) serves as a common reference. A training dataset (N = 3069) is used to develop a convolutional neural network (CNN) to automate impact simplification. When preserving peak MPS alone, the CNN-estimated effective peak rotational velocity achieves a coefficient of determination ([Formula: see text]) of ~ 0.96 relative to the directly identified counterpart, far outperforming nominal peak velocity from the resultant profiles ([Formula: see text] of ~ 0.34). Impacts from a subset of data (N = 1900) are also successfully matched with pcBRA idealized impacts based on elementwise MPS, where their regression slope and Pearson correlation coefficient do not deviate from 1.0 (when identical) by more than 0.1. The CNN-estimated effective peak rotation velocity and rotational axis are sufficiently accurate for ~ 73.5% of the impacts. This is not possible for the nominal peak velocity or any other conventional injury metric. The performance may be further improved by expanding the pcBRA to include deceleration and focusing on region-wise strains. This study establishes a new avenue to reduce an arbitrary head impact into an idealized but actual "impact mode" characterized by triplets of basic kinematic variables. They retain specific physical interpretations of head impact and may be an advancement over state-of-the-art kinematics-based scalar metrics for more effective impact comparison in the future.
Asunto(s)
Encéfalo/fisiopatología , Traumatismos Craneocerebrales/fisiopatología , Modelos Biológicos , Fenómenos Biomecánicos , Cabeza , Humanos , Redes Neurales de la Computación , RotaciónRESUMEN
PURPOSES: Accurate and efficient spine registration is crucial to success of spine image guidance. However, changes in spine pose cause intervertebral motion that can lead to significant registration errors. In this study, we develop a geometrical rectification technique via nonlinear principal component analysis (NLPCA) to achieve level-wise vertebral registration that is robust to large changes in spine pose. METHODS: We used explanted porcine spines and live pigs to develop and test our technique. Each sample was scanned with preoperative CT (pCT) in an initial pose and rescanned with intraoperative stereovision (iSV) in a different surgical posture. Patient registration rectified arbitrary spinal postures in pCT and iSV into a common, neutral pose through a parameterized moving-frame approach. Topologically encoded depth projection 2D images were then generated to establish invertible point-to-pixel correspondences. Level-wise point correspondences between pCT and iSV vertebral surfaces were generated via 2D image registration. Finally, closed-form vertebral level-wise rigid registration was obtained by directly mapping 3D surface point pairs. Implanted mini-screws were used as fiducial markers to measure registration accuracy. RESULTS: In seven explanted porcine spines and two live animal surgeries (maximum in-spine pose change of 87.5 mm and 32.7 degrees averaged from all spines), average target registration errors (TRE) of 1.70 ± 0.15 mm and 1.85 ± 0.16 mm were achieved, respectively. The automated spine rectification took 3-5 min, followed by an additional 30 secs for depth image projection and level-wise registration. CONCLUSIONS: Accuracy and efficiency of the proposed level-wise spine registration support its application in human open spine surgeries. The registration framework, itself, may also be applicable to other intraoperative imaging modalities such as ultrasound and MRI, which may expand utility of the approach in spine registration in general.
Asunto(s)
Imagenología Tridimensional/métodos , Imagen por Resonancia Magnética/métodos , Enfermedades de la Columna Vertebral/diagnóstico , Columna Vertebral/diagnóstico por imagen , Cirugía Asistida por Computador/métodos , Ultrasonografía/métodos , Animales , Modelos Animales de Enfermedad , Marcadores Fiduciales , Humanos , Enfermedades de la Columna Vertebral/cirugía , Columna Vertebral/cirugía , PorcinosRESUMEN
Head injury model validation has evolved from against pressure to relative brain-skull displacement, and more recently, against marker-based strain. However, there are concerns on strain data quality. In this study, we parametrically investigate how displacement random errors and synchronization errors propagate into strain. Embedded markers from four representative configurations are used to form unique and nonoverlapping tetrahedrons, triangles, and linear elements. Marker displacements are then separately subjected to up to ±10% random displacement errors and up to ±2 ms synchronization errors. Based on 100 random trials in each perturbation test, we find that smaller strain errors relative to the baseline peak strains are significantly associated with larger element sizes (volume, area, or length; p < 0.05). When displacement errors are capped at the two extreme levels, the earlier "column" and "cluster" configurations provide few usable elements with relative strain error under an empirical threshold of 20%, while about 30-80% of elements in recent "repeatable" and "uniform" configurations are considered otherwise usable. Overall, denser markers are desired to provide exhaustive pairwise linear elements with a range of sizes to balance the need for larger elements to minimize strain error but smaller elements to increase the spatial resolution in strain sampling. Their signed strains also provide unique and unambiguous information on tissue tension and compression. This study may provide useful insights into the scrutinization of existing experimental data for head injury model strain validation and to inform how best to design new experiments in the future.
Asunto(s)
EncéfaloRESUMEN
Bicycle helmets are shown to offer protection against head injuries. Rating methods and test standards are used to evaluate different helmet designs and safety performance. Both strain-based injury criteria obtained from finite element brain injury models and metrics derived from global kinematic responses can be used to evaluate helmet safety performance. Little is known about how different injury models or injury metrics would rank and rate different helmets. The objective of this study was to determine how eight brain models and eight metrics based on global kinematics rank and rate a large number of bicycle helmets (n=17) subjected to oblique impacts. The results showed that the ranking and rating are influenced by the choice of model and metric. Kendall's tau varied between 0.50 and 0.95 when the ranking was based on maximum principal strain from brain models. One specific helmet was rated as 2-star when using one brain model but as 4-star by another model. This could cause confusion for consumers rather than inform them of the relative safety performance of a helmet. Therefore, we suggest that the biomechanics community should create a norm or recommendation for future ranking and rating methods.
Asunto(s)
Ciclismo , Lesiones Encefálicas/fisiopatología , Dispositivos de Protección de la Cabeza/normas , Modelos Biológicos , Accidentes , Fenómenos Biomecánicos , Encéfalo/fisiología , Lesiones Encefálicas/prevención & control , Diseño de Equipo , HumanosRESUMEN
Efficient brain strain estimation is critical for routine application of a head injury model. Lately, a convolutional neural network (CNN) has been successfully developed to estimate spatially detailed brain strains instantly and accurately in contact sports. Here, we extend its application to automotive head impacts, where impact profiles are typically more complex with longer durations. Head impact kinematics (N=458) from two public databases were used to generate augmented impacts (N=2694). They were simulated using the anisotropic Worcester Head Injury Model (WHIM) V1.0, which provided baseline elementwise peak maximum principal strain (MPS). For each augmented impact, rotational velocity (vrot) and the corresponding rotational acceleration (arot) profiles were concatenated as static images to serve as CNN input. Three training strategies were evaluated: 1) "baseline", using random initial weights; 2) "transfer learning", using weight transfer from a previous CNN model trained on head impacts drawn from contact sports; and 3) "combined training", combining previous training data from contact sports (N=5661) for training. The combined training achieved the best performances. For peak MPS, the CNN achieved a coefficient of determination (R2) of 0.932 and root mean squared error (RMSE) of 0.031 for the real-world testing dataset. It also achieved a success rate of 60.5% and 94.8% for elementwise MPS, where the linear regression slope, k, and correlation coefficient, r, between estimated and simulated MPS did not deviate from 1.0 (when identical) by more than 0.1 and 0.2, respectively. Cumulative strain damage measure (CSDM) from the CNN estimation was also highly accurate compared to those from direct simulation across a range of thresholds (R2 of 0.899-0.943 with RMSE of 0.054-0.069). Finally, the CNN achieved an average k and r of 0.98±0.12 and 0.90±0.07, respectively, for six reconstructed car crash impacts drawn from two other sources independent of the training dataset. Importantly, the CNN is able to efficiently estimate elementwise MPS with sufficient accuracy while conventional kinematic injury metrics cannot. Therefore, the CNN has the potential to supersede current kinematic injury metrics that can only approximate a global peak MPS or CSDM. The CNN technique developed here may offer enhanced utility in the design and development of head protective countermeasures, including in the automotive industry. This is the first study aimed at instantly estimating spatially detailed brain strains for automotive head impacts, which employs >8.8 thousand impact simulations generated from ~1.5 years of nonstop computations on a high-performance computing platform.