RESUMEN
Parkinson's disease (PD) is a chronic neurodegenerative disease. At present, levodopa and other drugs are mainly used for dopamine supplementation therapy. However, the absorption of levodopa in the gastrointestinal tract is unstable and its half-life is short, and long-term use of levodopa will lead to the end-of-dose deterioration, dyskinesia, the "ON-OFF" phenomenon and other symptoms. Therefore, new preparations need to be developed to improve drug efficacy, reduce side effects or improve compliance of patients. Based on the above clinical needs, this review briefly introduced the preparation modification strategies for the treatment of PD through case analysis, in order to provide references for the research and development of related preparations.
RESUMEN
The taste of drugs has an important impact on the compliance of patients, but most of the active drug ingredients have an uncomfortable taste, especially traditional Chinese medicine. Through a variety of pharmaceutical excipients with taste masking properties combined with corresponding technologies can improve the taste of drugs and the characteristics of other dosage forms, so as to improve patient compliance. Here, we mainly summarize the auxiliary materials used for taste masking, explain the mechanism of taste masking from the point of view of excipients and introduces related uses, so as to provide reference for further research on taste masking of pediatric preparations.
RESUMEN
Good medicine tastes bitter, but it is often difficult to swallow because the drug is bitter and astringent, so that the compliance of patients with medication is poor. However, the use of taste masking technology can better improve this situation. Appropriate and effective taste masking technology can improve the drug compliance of patients, especially children, it can also improve the curative effect and the clinical value of drugs. Herein, we summarize the latest research progress of taste masking technology, and summarize the traditional taste masking technology from the aspects of action mechanisms and application scopes. Finally, the novel and efficient taste masking technologies were presented.
RESUMEN
As a basic amino acid, histidine has a pKa close to the acidity of the tumor microenvironment, thus the charge and solubility of histidine are able to vary as the pH changes. Under a neutral environment, histidine is not charged and exhibits hydrophobic properties, while it can be protonated and becomes hydrophilic when exposed to mildly acidic pH, such as tumor microenvironment. Therefore, histidine is widely used in the design of drug delivery systems to target the mildly acidic pH of tumor microenvironment. This article reviews the recent progresses of histidine-based tumor-targeting drug delivery systems, and summarizes the principles on promoting internalization and tuning drug release by taking advantage of histidine. Finally, we point out the common issues on histidine application and illustrate its future prospects.
RESUMEN
In this paper, the low-field nuclear magnetic resonance technology CPMG (Carr-Purcell-Meiboom-Gill) echo method was used to determine the cross-linking degree and cross-linking density of crospovidone (PVPP) from different manufacturers. Based on the seven physical properties of PVPP, a fingerprint spectrum (radar chart) of twenty secondary quality indicators were obtained, and three compressibility evaluation indicators, index of the parameter (IP), index of parametric profile (IPP), index of good compression (IGC) were calculated by the fingerprint spectrum. It was found that the cross-linking degree and compressibility index IP of PVPP showed a strong correlation (r = 0.816) by the correlation analysis, indicating that the cross-linking degree is one of the key quality attributes for evaluating the compressibility of PVPP.
RESUMEN
italic>K-values of 56 batches of 7 types of povidone were measured by microfluidic rheometry and with a Ubbelohde capillary viscometer. The K-values of the two methods were tested by SPSS software and the results showed that there was no significant difference between the two methods (P > 0.05). Taking K-values measured with the Ubbelohde capillary viscometer (Ku) as the abscissa and K-values measured by microfluidic rheometry (Km) as the ordinate a linear equation was calculated: Km = 0.893 9Ku + 4.617 6, R2 = 0.986 2, with good linearity, indicating that the microfluidic rheometer method can replace the Ubbelohde capillary viscometer in determining K-values of povidone. The microfluidic rheometer method has the benefits of less sample consumption, faster determination, and is more accurate, and it can be used with high-throughput automatic acquisition, which provides a more convenient method for the determination of K-values of different types of povidone. The weight-average molecular weights (Mw) of each type of povidone were measured by gel permeation chromatography-multi angle laser light scattering (GPC-MALLS), and the relationship between Mw and Km was lgMw = -0.000 4 Km2 + 0.072 7 Km + 2.791, R2 = 0.990 1. The fitting relationship was good, and Mw could be calculated by Km by the equation.
RESUMEN
The therapeutic application of deoxypodophyllotoxin (DPT) is limited due to its poor water solubility and stability. In the present study, the micelles assembled by the amphiphilic block copolymers (mPEG-PDLLA) were constructed to improve the solubility and safety of DPT for their in vitro and in vivo application. The central composite design was utilized to develop the optimal formulation composed of 1221.41 mg mPEG-PDLLA, the weight ratio of 1 : 4 (mPEG-PDLLA : DPT), 30 mL hydration volume and the hydration temperature at 40 °C. The results showed that the micelles exhibited uniformly spherical shape with the diameter of 20 nm. The drug-loading and entrapment efficiency of deoxypodophyllotoxin-polymeric micelles (DPT-PM) were about (20 ± 2.84)% and (98 ± 0.79)%, respectively, indicating that the mathematical models predicted well for the results. Compared to the free DPT, the cytotoxicity showed that blank micelles possessed great safety for Hela cells. In addition, the DPT loaded micelle formulation achieved stronger cytotoxicity at the concentration of 1 × 10 mol·L, which showed significant difference from free DPT (P < 0.05). In conclusion, the micelles were highly promising nano-carriers for the anti-tumor therapy with DPT.
Asunto(s)
Humanos , Antineoplásicos , Química , Toxicidad , Supervivencia Celular , Portadores de Fármacos , Química , Sistemas de Liberación de Medicamentos , Métodos , Diseño de Fármacos , Células HeLa , Micelas , Tamaño de la Partícula , Podofilotoxina , Química , Toxicidad , Poliésteres , Química , Polietilenglicoles , Química , Solubilidad , Propiedades de SuperficieRESUMEN
The therapeutic application of deoxypodophyllotoxin (DPT) is limited due to its poor water solubility and stability. In the present study, the micelles assembled by the amphiphilic block copolymers (mPEG-PDLLA) were constructed to improve the solubility and safety of DPT for their in vitro and in vivo application. The central composite design was utilized to develop the optimal formulation composed of 1221.41 mg mPEG-PDLLA, the weight ratio of 1 : 4 (mPEG-PDLLA : DPT), 30 mL hydration volume and the hydration temperature at 40 °C. The results showed that the micelles exhibited uniformly spherical shape with the diameter of 20 nm. The drug-loading and entrapment efficiency of deoxypodophyllotoxin-polymeric micelles (DPT-PM) were about (20 ± 2.84)% and (98 ± 0.79)%, respectively, indicating that the mathematical models predicted well for the results. Compared to the free DPT, the cytotoxicity showed that blank micelles possessed great safety for Hela cells. In addition, the DPT loaded micelle formulation achieved stronger cytotoxicity at the concentration of 1 × 10 mol·L, which showed significant difference from free DPT (P < 0.05). In conclusion, the micelles were highly promising nano-carriers for the anti-tumor therapy with DPT.
Asunto(s)
Humanos , Antineoplásicos , Química , Toxicidad , Supervivencia Celular , Portadores de Fármacos , Química , Sistemas de Liberación de Medicamentos , Métodos , Diseño de Fármacos , Células HeLa , Micelas , Tamaño de la Partícula , Podofilotoxina , Química , Toxicidad , Poliésteres , Química , Polietilenglicoles , Química , Solubilidad , Propiedades de SuperficieRESUMEN
The therapeutic application of artemisinin (ART) is restricted in application due to its poor water solubility and stability. In this study, the long-circulating liposomes (L-Lip) were constructed to improve the solubility and stability of ART. The preparation method, physicochemical properties, serum stability, in vitro release profile and cytotoxicity of the ART loaded long-circulating liposomes were investigated. Using the particle size and entrapment efficiency (EE) as the evaluation index, the preparation procedure was optimized by the Box-Behnken response surface design based on the single factor screening method. The ART loaded long-circulating liposomes were prepared by filming rehydration method, and evaluated with particle size and entrapment efficiency. The optimal formulation was as follows:lipid-cholesterol=5.22:1 (mass ratio), drug-lipid=1:23.15 (mass ratio), lipid concentration=14.35 mg·mL-1, and molar percentage of mPEG=2%. The morphology of L-Lip was uniformly spherical shape according to optimal formulation. The mean size and polydispersity index (PDI) were about (113.3 ±4.7) nm and 0.227 ±0.022 respectively, the zeta potential was (-12.9 ±2.6) mV, and the entrapment efficiency (EE) of ART was (95.88 ±4.8)%. The L-Lip had good stability at 4℃ for 15 days and the particle sizes did not exhibit significant variations in 50% rat plasma over 24 h at 37℃. The in vitro release study of formulation showed a sustained release. Moreover, the cytotoxicity exhibited that blank liposomes were of great safety. Compared with the free ART, the liposome formulation achieved lower cytotoxicity at the high concentration. The L-Lip successfully prepared by a simple filming-rehydration method exhibited ideal physicochemical properties and were enhanced safety, which may sever as a promising nanoplatform for clinical application.
RESUMEN
In this paper, the status of adjuvant standard for Chinese materia medica processing in the Chinese Pharmacopoeia 2015 edition, the National Specification of Chinese Materia Medica Processing, and the 29 provincial specification of Chinese materia medica was summarized, and the the status including general requirements, specific requirements, and quality standard in the three grade official specifications was collected and analyzed according to the "medicine-adjuvant homology" and "food-adjuvant homology" features of adjuvants. This paper also introduced the research situation of adjuvant standard for Chinese materia medica processing in China; In addition, analyzed and discussed the problems existing in the standard system of adjuvant for Chinese materia medica processing, such as lack of general requirements, low level of standard, inconsistent standard references, and lack of research on the standard, and provided suggestions for the further establishment of the national standards system of adjuvant for Chinese materia medica processing.
RESUMEN
This study is to prepare the in situ forming sustained-release injection which can perform sustained release behavior at the periodontal site for 7 days and to evaluate its in vitro and in vivo properties. After preparation of in situ forming sustained-release injection the in situ time was studied. And the surface of the solid injection was characterized by SEM. The rheological curve at 0 degrees C, 25 degrees C, 37 degrees C was determined and the impact of the temperature on the viscosity was examined. The in vitro release behavior was investigated. At last, rabbit periodontitis model was established to study its pharmacokinetics. The injection was stable, hard to stratify and decompose. The in situ forming time was about 6 seconds. It can easily adhere into periodontal pockets. There were lots of holes on the surface of the solid injection for the drug to diffuse. The drug releasing curves could be fit by Korsmeyer-Peppas equation. The drug smoothly released for 7 days at pH 7.4 PBS buffer with a very slight burst release and maintained a certain concentration. In vivo pharmacokinetics results indicated that after administration with the in situ forming injection, achievement of tinidazole (TNZ) concentration in gingival crevicular fluid (GCF) was more comparable and long-lasting than usual solution of TNZ management and relatively constant TNZ levels were attained until 168 h. All these results supported the prospect of tinidazole in situ forming sustained-release injection in clinical applications.
Asunto(s)
Animales , Conejos , Antitricomonas , Farmacocinética , Preparaciones de Acción Retardada , Portadores de Fármacos , Composición de Medicamentos , Métodos , Endotoxinas , Líquido del Surco Gingival , Metabolismo , Inyecciones , Bolsa Periodontal , Metabolismo , Periodontitis , Metabolismo , Poliésteres , Farmacocinética , Polietilenglicoles , Farmacocinética , Distribución Aleatoria , Reología , Tinidazol , FarmacocinéticaRESUMEN
In this study, indomethacin (IND) loaded solidified-polymeric micelles (IND-SPM) were prepared. Their in vitro characteristics were investigated. Methoxy-poly(ethylene glycol) poly(D, L-lactide) copolymer (mPEG-PDLLA) was used as IND carrier. The preparation of IND-SPM was conducted by solution-absorption method and evaporation by rotary evaporator. Polyplasdone XL-10 was used as adsorbent. The solution-absorption method was conducted by the following procedure; IND and mPEG-PDLLA were dissolved in acetone, followed by addition of polyplasdone XL-10 and stirred to obtain a suspension. The powder of IND-SPM was simply obtained after the organic solvent was completely evaporated. More than 90% (w/w) of IND (20 mg) in the powder was dissolved in 250 mL PBS within 30 min. DSC, 1H NMR and SEM results proved that IND was encapsulated within mPEG-PDLLA. The solubility of IND in the system increased 4.6 times with the highest amount of copolymer. The solidified particles were found to be suitable for the formulation of tablets or capsules.
Asunto(s)
Administración Oral , Antiinflamatorios no Esteroideos , Química , Portadores de Fármacos , Química , Composición de Medicamentos , Sistemas de Liberación de Medicamentos , Indometacina , Química , Micelas , Poliésteres , Química , Polietilenglicoles , Química , Povidona , Química , SolubilidadRESUMEN
To develop different methods for determining siRNA content and the entrapment efficiency of siRNA loaded liposomes, SYBR Gold electrophoresis method and Ribogreen fluorospectrophotometry method were used respectively. SYBR Gold electrophoresis method has a good linear relation in a range at 0.2-2.0 micromol x L(-1) (R = 0.9930), and the recovery at the high, middle and low concentrations were 96.35%, 96.92%, and 100.74%, respectively (n = 3). The intra-day and inter-day RSD were far below 5% (n = 5). Ribogreen fluorospectrophotometry method has a good linear relation in a range at 10-50 nmol x L(-1) (R = 0.9971), and the recovery at the high, middle and low concentrations were 98.22%, 99.88% and 99.64%, respectively (n = 3). The intra-day and inter-day RSD were far below 5% (n = 5). The content and the entrapment efficiency of three batches of siRNA cationic liposomes were 98.52%, 97.85% and 99.20%, 96.45%, respectively, with these two methods. And there is no significant difference by ANOVA. Both of the two methods are accurate, sensitive, convenient method for determination of the siRNA content and the entrapment efficiency of siRNA loaded cationic liposomes.