RESUMEN
The Single Crystal Dispersion Interferometer (SCDI) is a newly developed dispersion interferometer (DI) system installed on KSTAR and has obtained the first data successfully in January 2020. Unlike conventional heterodyne DI systems, which use two nonlinear crystals, only one nonlinear crystal is used to eliminate the difficulty in overlapping the first and second harmonic beams, aligning and focusing the beams to a small aperture of the second nonlinear crystal, and resolving a problem of significant efforts to maintain the beam alignment to the second nonlinear crystal after a long beam transmission. The second nonlinear crystal is replaced by a frequency doubler, a simple electronic component. To infer a line integrated electron density with its associated uncertainty consistent with the measured data, we develop a forward model of the KSTAR SCDI that can be used as a likelihood within a Bayesian-based data analysis routine. The forward model consists of two main parts, which are an optical system and an electronics system, and it takes into account noises by modeling the mechanical vibrations and the electronic noises as Gaussian distributions, while the photon noise is modeled with a Poisson distribution. The developed forward model can be used for designing and improving the SCDI system.
RESUMEN
Dispersion interferometers have been used to measure line integrated electron densities from many fusion devices. To optically suppress noise due to mechanical vibrations, a conventional dispersion interferometer typically uses two nonlinear crystals located before and after the plasma along the laser beam path. Due to the long beam path, it can be difficult to overlap the fundamental and second harmonic laser beams for a heterodyne dispersion interferometer and to focus the beams on the second nonlinear crystal located after the plasma, especially when the aperture of the nonlinear crystal is small, i.e., of the order of mm. To overcome such difficulties, a new concept of a heterodyne dispersion interferometer, a single crystal dispersion interferometer (SCDI), is developed and installed on KSTAR with the laser wavelength of 1064 nm. The concept and the optical setup of the KSTAR SCDI are discussed, as well as its first measurement during a shattered pellet injection that produces abrupt and large changes in the electron density. To demonstrate feasibility, the KSTAR SCDI measurements are also compared with those from the existing two-color interferometer.
RESUMEN
A fringe jump compensation algorithm has been developed for a phase measurement that measures the phase within a single fringe. The algorithm is extremely useful in the case of the time-averaging zero-crossing phase detector on noisy environments. When the noise level on the measurements is not sufficiently suppressed, the signals near the fringe jump show a negative slope instead of a sharp drop. The slope brings an ambiguity over the compensation process. An algorithm with an additional channel that measures the phase of a half fringe shift has been applied in the millimeter-wave interferometer on the Korea Superconducting Tokamak Advanced Research device. These techniques removed the ambiguity in most cases. The algorithm can provide a most simple, robust, and cost-effective solution for the phase measurement system in various fields.
RESUMEN
The far infrared tangential interferometer/polarimeter (FIReTIP) of the National Spherical Torus Experiment (NSTX) has been set up to provide reliable electron density signals for a real-time density feedback control system. This work consists of two main parts: suppression of the fringe jumps that have been prohibiting the plasma density from use in the direct feedback to actuators and the conceptual design of a density feedback control system including the FIReTIP, control hardware, and software that takes advantage of the NSTX plasma control system (PCS). By investigating numerous shot data after July 2009 when the new electronics were installed, fringe jumps in the FIReTIP are well characterized, and consequently the suppressing algorithms are working properly as shown in comparisons with the Thomson scattering diagnostic. This approach is also applicable to signals taken at a 5 kHz sampling rate, which is a fundamental constraint imposed by the digitizers providing inputs to the PCS. The fringe jump correction algorithm, as well as safety and feedback modules, will be included as submodules either in the gas injection system category or a new category of density in the PCS.
RESUMEN
A novel design of a Stark-tuned far-infrared laser using a circular hollow dielectric waveguide is proposed, and its characteristics are studied. Supplementary electrodes are inserted inside the circular hollow dielectric tube to suppress charge accumulation while keeping field uniformity. In what is believed to be a new design, the mode property is found to be improved, and the angular dependency of the attenuation loss according to the beam polarization is estimated to be much smaller than that of the conventional rectangular hybrid waveguide design. In this new design, DeltaM=0 far-infrared (FIR) transition as well as DeltaM=+/-1 transition can be observed, and the power enhancement for the DeltaM=0 FIR transition is expected.