Evaluation of the In-Use Stability of Monoclonal Antibody IV Admixtures Prepared from Drug Products Containing Polysorbate 20 Degraded by Host-Cell Lipases.

Host-cell lipases can be present in monoclonal antibody drug products and can degrade polysorbates present in the formulations as stabilizers. We hypothesized that the in-use stability of the IV admixture prepared from such a drug product might be impacted by decreasing levels of polysorbate 20. Host-cell lipase activity has, in fact, been observed during development of one of our therapeutic monoclonal antibody drug products. Throughout the course of the product shelf life, polysorbate 20 levels decreased but no other quality attributes of the drug product were impacted. An experimental approach was developed to simulate how the prepared IV admixture in-use stability is affected as polysorbate 20 concentration in the drug product decreased over the shelf life, and from that a minimum level of polysorbate 20 required in the drug product was determined to estimate the in-use stability of the IV admixture as the polysorbate 20 in the drug product degrades. The results indicate that although the observed degradation of polysorbate 20 does not affect quality attributes of this drug product, in-use stability of the IV admixture as a function of polysorbate degradation can be impacted and should be assessed to ensure sufficient quality.

An Intercompany Perspective on Practical Experiences of Predicting, Optimizing and Analyzing High Concentration Biologic Therapeutic Formulations.

Developing high-dose biologic drugs for subcutaneous injection often requires high-concentration formulations and optimizing viscosity, solubility, and stability while overcoming analytical, manufacturing, and administration challenges. To understand industry approaches for developing high-concentration formulations, the Formulation Workstream of the BioPhorum Development Group, an industry-wide consortium, conducted an inter-company collaborative exercise which included several surveys. This collaboration provided an industry perspective, experience, and insight into the practicalities for developing high-concentration biologics. To understand solubility and viscosity, companies desire predictive tools, but experience indicates that these are not reliable and experimental strategies are best. Similarly, most companies prefer accelerated and stress stability studies to in-silico or biophysical-based prediction methods to assess aggregation. In addition, optimization of primary container-closure and devices are pursued to mitigate challenges associated with high viscosity of the formulation. Formulation strategies including excipient selection and application of studies at low concentration to high-concentration formulations are reported. Finally, analytical approaches to high concentration formulations are presented. The survey suggests that although prediction of viscosity, solubility, and long-term stability is desirable, the outcome can be inconsistent and molecule dependent. Significant experimental studies are required to confirm robust product definition as modeling at low protein concentrations will not necessarily extrapolate to high concentration formulations.

Low pKa of Lys promotes glycation at one complementarity-determining region of a bispecific antibody.

Protein glycation is a common, normally innocuous, post-translational modification in therapeutic monoclonal antibodies. However, when glycation occurs on complementarity-determining regions (CDRs) of a therapeutic monoclonal antibody, its biological activities (e.g., potency) may be impacted. Here, we present a comprehensive approach to understanding the mechanism of protein glycation using a bispecific antibody. Cation exchange chromatography and liquid chromatography-mass spectrometry were used to characterize glycation at a lysine residue within a heavy chain (HC) CDR (HC-CDR3-Lys98) of a bispecific antibody. Thermodynamic analysis revealed that this reaction is reversible and can occur under physiological conditions with an apparent affinity of 8-10 mM for a glucose binding to HC-CDR3-Lys98. Results from kinetic analysis demonstrated that this reaction follows Arrhenius behavior in the temperature range of 5°C-45°C and can be well predicted in vitro and in a non-human primate. In addition, this glycation reaction was found to be driven by an unusually low pKa on the ε-amino group of HC-CDR3-Lys98. Van't Hoff analysis and homology modeling suggested that this reaction is enthalpically driven, with this lysine residue surrounded by a microenvironment with low polarity. This study provides, to our knowledge, new insights toward a mechanistic understanding of protein glycation and strategies to mitigate the impact of protein glycation during pharmaceutical development.

An Intercompany Perspective on Compatibility and In-use Stability Studies to Enable Administration Of Biopharmaceutical Drug Products.

In-use stability and compatibility studies are often used in biotherapeutic development to assess stability and compatibility of biologic drugs with diluents and/or administration components at relevant conditions for the target route of administration (commonly intravenous, subcutaneous or intramuscular), to assure that patient safety and product efficacy are maintained during clinical use. To gain an understanding of current industry approaches for in-use stability and compatibility studies, the Formulation Workstream of the BioPhorum Development Group (BPDG), an industry-wide consortium, conducted an inter-company collaboration exercise, which included five bench-marking surveys around in-use stability and compatibility studies of biologic drugs. The results of this industry collaboration provide insights into the practicalities of these studies and how they are being used to support administration of biologics from early clinical programs to marketed products. The surveys queried topics including regulatory strategies and feedback; clinical in-use formulation, patient and site considerations; clinical blinding, masking and placebo approaches; study setup, execution and reporting; and clinical in-use stability and compatibility testing to provide a comprehensive picture of the range of common industry practices. This paper discusses the survey results and presents various approaches which can be used to guide the strategy and design of an in-use stability and compatibility program based on clinical and biomolecule needs.

GFT projection NMR based resonance assignment of membrane proteins: application to subunit C of E. coli F(1)F (0) ATP synthase in LPPG micelles.

G-matrix FT projection NMR spectroscopy was employed for resonance assignment of the 79-residue subunit c of the Escherichia coli F(1)F(0) ATP synthase embedded in micelles formed by lyso palmitoyl phosphatidyl glycerol (LPPG). Five GFT NMR experiments, that is, (3,2)D HNNCO, L-(4,3)D HNNC (alphabeta) C (alpha), L-(4,3)D HNN(CO)C (alphabeta) C (alpha), (4,2)D HACA(CO)NHN and (4,3)D HCCH, were acquired along with simultaneous 3D (15)N, (13)C(aliphatic), (13)C(aromatic)-resolved [(1)H,(1)H]-NOESY with a total measurement time of approximately 43 h. Data analysis resulted in sequence specific assignments for all routinely measured backbone and (13)C(beta) shifts, and for 97% of the side chain shifts. Moreover, the use of two G(2)FT NMR experiments, that is, (5,3)D HN{N,CO}{C (alphabeta) C (alpha)} and (5,3)D {C (alphabeta) C (alpha)}{CON}HN, was explored to break the very high chemical shift degeneracy typically encountered for membrane proteins. It is shown that the 4D and 5D spectral information obtained rapidly from GFT and G(2)FT NMR experiments enables one to efficiently obtain (nearly) complete resonance assignments of membrane proteins.

Structural basis for the physiological temperature dependence of the association of VP16 with the cytoplasmic tail of herpes simplex virus glycoprotein H.

Critical events in the life cycle of herpes simplex virus (HSV) are the binding of cytoplasmic capsids to cellular organelles and subsequent envelopment. Work from several laboratories suggests that these events occur as a result of a network of partially redundant interactions among the capsid surface, tegument components, and cytoplasmic tails of virally encoded glycoproteins. Consistent with this model, we previously showed that tegument protein VP16 can specifically interact with the cytoplasmic tail of envelope protein gH in vitro and in vivo when fused to glutathione S-transferase and to green fluorescent protein, respectively. In both instances, this association was strikingly temperature dependent: binding occurred only at 37 degrees C and not at lower temperatures. Here we demonstrate that virally expressed full-length gH and VP16 can be coimmunoprecipitated from HSV-infected cells and that this association is also critically dependent upon the physiological temperature. To investigate the basis of this temperature requirement, we performed one- and two-dimensional nuclear magnetic resonance spectroscopy on peptides with the sequence of the gH tail. We found that the gH tail is disorganized at temperatures permissive for binding but becomes structured at lower temperatures. Furthermore, a mutated tail unable to adopt this rigid conformation binds VP16 even at 4 degrees C. We hypothesize that the gH tail is unstructured under physiological conditions in order to maximize the number of potential tegument partners with which it may associate. Being initially disordered, the gH tail may adopt one of several induced conformations as it associates with VP16 or alternative components of the tegument, maximizing redundancy during particle assembly.

Folding kinetics of the protein pectate lyase C reveal fast-forming intermediates and slow proline isomerization.

Pectate lyase C (pelC) is a member of the class of proteins that possess a parallel beta-helix folding motif. A study of the kinetic folding mechanism is presented in this report. Kinetic circular dichroism (CD) and fluorescence have been used to observe changes in the structure of pelC as a function of time upon folding and unfolding. Three folding phases are observed with far-UV CD and four phases are observed with near-UV CD. The two slowest phases have relaxation times on the order of 21 and 46 s in aqueous buffer. Double-jump refolding assays and the measured activation enthalpies (16.0 and 21.2 kcal/mol for the respective slow phases) suggest that these two phases are the result of the slow cis-trans isomerization of prolyl-peptide bonds. We have determined that the earliest observed folding phase involves the formation of most, if not all, of the secondary structure with a relaxation time of 0.25 s. We also observed a phase by near-UV CD on the order of 0.25 s. This suggests that along with the appearance of secondary structure, some tertiary contacts are made. There is one kinetic phase observed in the near-UV CD and fluorescence that has no corresponding far-UV CD phase. This occurs with a relaxation time of 1.1 s. The temperature dependence of the natural log of the folding rate constant suggests that folding occurs via a sequential mechanism in which an on-pathway intermediate in rapid equilibrium with the unfolded protein is present. Semiempirical CD calculations support the idea that the beta-helix region of pelC forms in the fast kinetic phase, yielding near-native secondary and tertiary structures in that region. This is followed by the slower formation of the loop regions connecting individual strands of the beta-helix.

Identification of proline residues responsible for the slow folding kinetics in pectate lyase C by mutagenesis.

The folding mechanism of pectate lyase C (pelC) involves two slow phases that have been attributed to proline isomerization. To have a more detailed and complete understanding of the folding mechanism, experiments have been carried out to identify the prolyl-peptide bonds responsible for the slow kinetics. Site-directed mutagenesis has been used to mutate each of the prolines in pelC to alanine or valine. It has been determined that isomerization of the Leu219-Pro220 peptide bond is responsible for the slowest folding phase observed. The mutant P220A shows kinetic behavior that is identical to the wild-type protein except that the 46-s phase is eliminated. The Leu219-Pro220 peptide bond is cis in the native enzyme. An analysis of the free energy of unfolding of this mutant indicates that the mutation destabilizes the protein by about 4 kcal/mol. However, it appears that the major refolding pathways are unaltered. Further mutations were carried out in order to assign the peptide bond responsible for the 21-s folding phase in pelC. Mutation of the remaining 11 prolines, which are trans in the native enzyme, resulted in no significant changes in the kinetic folding behavior. The conclusion from these experiments is that the 21-s phase involves isomerization of more than one prolyl-peptide bond with similar activation energies.