RESUMEN
Biogas quality, the presence of some trace components (siloxanes, sulfur compounds, volatile organic compounds, VOCs) in biogas, is in a decisive role when determining the biogas utilization and the purification requirements and equipments. In the present work, the effects of process changes related to reactor loading variations on the concentrations of selected trace compounds in biogas were studied. Source separated biowaste and sewage sludge were co-digested in a mesophilic pilot reactor (200 L) for four months during which the organic load was stepwise increased. The results showed that the process worked steadily up to the load of 8 kgVS m(-3)d(-1). Also the community composition of methanogenic archae stayed largely unaffected by the load increase, and was at all stages typical for a mesophilic biogasification process. Gaseous concentrations of siloxanes, hydrogen sulfide and most VOCs remained at a constant low level, showing no sensitivity to variations in the load and related process changes. However, the total siloxane concentration in the biogas was dependent on feed quality, and the detected concentrations require removal prior to use in turbines or fuel cells. Otherwise, after the removal of siloxanes, the biogas studied in this work is well applicable in various electricity production options, like in gas engines, turbines, microturbines and fuel cells.
Asunto(s)
Biocombustibles , Aguas del Alcantarillado , Archaea , Electricidad , Sulfuro de Hidrógeno/análisis , Methanosarcina , Aguas del Alcantarillado/microbiología , Siloxanos/análisis , Compuestos de Azufre/análisis , Compuestos Orgánicos Volátiles/análisis , Eliminación de Residuos Líquidos/métodosRESUMEN
Four commercial strains and two mutants of the yeast species Yarrowia lipolytica were screened using batch fermentation. Strain Y. lipolytica A-101-1.14 (induced with UV irradiation) was found to be the most suitable for citric acid production from glucose hydrol (39.9% glucose and 2.1% other sugars), a byproduct of glucose production from potato starch. The specific rate of total citric and isocitric acid production was 0.138 g/g.h, the yield on consumed glucose 0.93 g/g, and the productivity achieved was as high as 1.25 g/L.h. All of the tested yeast strains were able to utilize only the glucose from the glucose hydrol medium. Thus, some residual higher oligosaccharides remained in the process effluent.
Asunto(s)
Citratos/biosíntesis , Fermentación , Glucosa/metabolismo , Levaduras/metabolismo , Ácido Cítrico , Cinética , Mutagénesis , Rayos UltravioletaRESUMEN
The continuous itaconic acid production from sucrose with Aspergillus terreus TKK 200-5-3 mycelium immobilized on polyurethane foam cubes was optimized in column bioreactors using statistical experimental design and empirical modelling. The highest itaconic acid product concentration calculated on the basis of the obtained model was 15.8 g l-1 in the investigated experimental area, when sucrose concentration was 13.5%, aeration rate 150 ml min-1 and residence time 178 h. From sucrose with immobilized A. terreus TKK 200-5-3 mycelium itaconic acid production was stable for at least 4.5 months in continuous column bioreactors. In comparison, using glucose as substrate and immobilized A. terreus TKK 200-5-1 mycelium as biocatalyst similar stability was obtained with higher product concentration. The omission of copper sulphate from the production medium gave the highest itaconic acid product concentration (26 g l-1) from 9% glucose with 0.25% ammonium nitrate and 0.095% magnesium sulphate.