Integrated Structural Modulation Inducing Fast Charge Transfer in Aqueous Zinc-Ion Batteries.

Aqueous Zn-ion batteries (AZIBs) are promising energy-storage devices owing to their exceptional safety, long cycle life, simple production, and high storage capacity. Manganese oxides are considered potential cathode materials for AZIBs, primarily because of their safety, low cost, simple synthesis, and high storage capacity. However, MnO2-based cathodes tend to deteriorate structurally during long-term cycling, which reduces their reversible capacity. In this study, an advanced α-MnO2@SnO2 nanocomposite via facile hydrothermal synthesis is developed. The synergistic effects of lattice disorder and increased electron conductivity in the α-MnO2@SnO2 nanocomposite mitigate structural degradation and enhance the overall electrochemical performance. The nanocomposite exhibits a high reversible capacity of 347 mAh g-1 at a current density of 100 mA g-1 after 50 cycles. Furthermore, it exhibits excellent rate performance and stable capacity even after 1000 cycles, maintaining a capacity of 78 mAh g-1 at a high current density of 5 A g-1. This excellent electrochemical performance is attributed to the reversible Zn intercalation in α-MnO2@SnO2 nanocomposites due to the increased structural stability and fast ion/electron exchange caused by the distortion of the tunnel structure, on the basis of various ex situ experiments, density functional theory calculations, and electrochemical characterizations.

The oxidative stress-dependent pulmonary inflammation of inhalable multi-walled carbon nanotube-containing nano-concrete dust and its comparison with conventional concrete dust and DQ12.

Nano-concrete, which is an admixture of nanomaterials in concrete recipes, has been investigated to overcome the limitations of existing concrete, such as its stability and strength. However, there is no information on the human health effects of broken-down dust released during the construction and demolition efforts. In this study, we prepared an inhalable fraction of multi-walled carbon nanotube-containing nano-concrete dust and performed comparative toxicity studies with conventional concrete dust and DQ12 using a rat intratracheal instillation model. Although the recipes for concrete and nano-concrete are entirely different, the pulverized dust samples showed similar physicochemical properties, such as 0.46-0.48 µm diameter and chemical composition. Both concrete and nano-concrete dust exhibited similar patterns and magnitudes, representing acute neutrophilic inflammation and chronic active inflammation with lymphocyte infiltration. The toxicity endpoints of the tested particles at both time points showed an excellent correlation with the reactive oxygen species levels released from the alveolar macrophages, highlighting that alveolar macrophages are the primary target cells and that the oxidative stress paradigm is the main toxicity mechanism of the tested particles. In addition, the toxicity potentials of both concrete and nano-concrete dust were more than 10 times lower than that of DQ12.

Synthesis and characterization of nitrogen-doped-MWCNT@cobalt oxide for nerve agent simulant detection.

Organophosphorus nerve agents are toxic compounds that disrupt neuromuscular transmission by inhibiting the neurotransmitter enzyme, acetylcholinesterase, leading to rapid death. A hybrid composite was synthesized using a hydrothermal process for the early detection of dimethyl methyl phosphonate (DMMP), a simulant of the G-series nerve agent, sarin. Quartz crystal microbalance (QCM) and surface acoustic wave (SAW) sensors were used as detectors. Nitrogen-doped multiwalled carbon nanotubes (N-MWCNTs), cobalt oxide (Co3O4), and N-MWCNT@Co3O4 were compared to detect DMMP concentrations of 25-150 ppm. At 25 ppm, the differential frequencies (Δf) of the N-MWCNT, Co3O4, and N-MWCNT@Co3O4 sensors were 5.8, 2.3, and 99.5 Hz, respectively. The selectivity results revealed a preference for the DMMP rather than potential interference. The coefficients of determination (R2) of the N-MWCNT, Co3O4, and N-MWCNT@Co3O4 sensors for detecting 25-150 ppm DMMP were 0.983, 0.986, and 0.999, respectively. The response times of the N-MWCNT, Co3O4, and N-MWCNT@Co3O4 sensors for detecting 100 ppm DMMP were 25, 27, and 34 s, respectively, while the corresponding recovery times were 85, 105, and 181 s. The repeatability results revealed the reversible adsorption and desorption phenomena for the fixed DMMP concentration of 100 ppm. These unique findings show that synthesized materials can be used to detect organophosphorus nerve agents.

Spherical Sulfur-Infiltrated Carbon Cathode with a Tunable Poly(3,4-ethylenedioxythiophene) Layer for Lithium-Sulfur Batteries.

Li-S batteries have received significant attention owing to their high energy density, nontoxicity, low cost, and eco-friendliness. However, the dissolution of lithium polysulfide during the charge/discharge process and its extremely low electron conductivity hinder practical applications of Li-S batteries. Herein, we report a sulfur-infiltrated carbon cathode material with a spherical morphology and conductive polymer coating. The material was produced via a facile polymerization process that forms a robust nanostructured layer and physically prevents the dissolution of lithium polysulfide. The thin double layer composed of carbon and poly(3,4-ethylenedioxythiophene) provides sufficient space for sulfur storage and effectively prevents the elution of polysulfide during continuous cycling, thereby playing an essential role in increasing the sulfur utilization rate and significantly improving the electrochemical performance of the battery. Sulfur-infiltrated hollow carbon spheres with a conductive polymer layer demonstrate a stable cycle life and reduced internal resistance. The as-fabricated battery demonstrated an excellent capacity of 970 mA h g-1 at 0.5 C and a stable cycle performance, exhibiting ∼78% of the initial discharge capacity after 50 cycles. This study provides a promising approach to significantly improve the electrochemical performance of Li-S batteries and render them as valuable and safe energy devices for large-scale energy storage systems.

Disagreement Between the Accepted Best-Fit Circle Method to Calculate Bone Loss Between Injured and Uninjured Shoulders.

BACKGROUND: No study has evaluated whether best-fit circles based on glenoids with defects accurately represent normal inferior glenoids before injury. PURPOSE: To investigate whether the best-fit circles on the affected side with a glenoid defect can accurately represent native glenoids before injury. STUDY DESIGN: Cohort study (diagnosis); Level of evidence, 3. METHODS: This retrospective study included 58 patients with unilateral recurrent anterior shoulder instability. First, we compared the diameter of best-fit circles based on affected and unaffected glenoids. Glenoid defect sizes based on each best-fit circle were then calculated and compared. Second, we created serial virtual glenoid defects (10%, 15%, 20%, 25%) on unaffected glenoids and compared diameters of best-fit circles on the glenoids before and after virtual defects. We also analyzed and compared the size of virtual and calculated glenoid defects. Bland-Altman plots and intraclass coefficients (ICCs) were used to compare and analyze agreement of measurements. After categorization of glenoid defects based on clinical cutoff values, Cohen κ and percentage agreement were calculated. RESULTS: The diameter of 55.2% (32/58) of best-fit circles from affected glenoids over- or underestimated the diameter on the unaffected side by >5%. In 28 of the 32 patients, the diameter of the affected side circle was overestimated. Consequently, 41.4% (24/58) of glenoid defects were over- or underestimated by >5%. In 19 of the 24 patients, the glenoid defect from the affected side was >5% larger. ICCs between sides for best-fit circle diameters and defect sizes were 0.632 and 0.800, respectively. Agreement of glenoid defect size between sides was 58.6% (34/58) overall, but when the defect was ≥10%, agreement decreased to 32.3% (10/31). Among 232 glenoids with virtual defects created from 58 normal glenoids, the diameter of 31.0% (72/232) of best-fit circles and the size of 11.6% (27/232) of defects were over- or underestimated by >5%. CONCLUSION: When assessing glenoid defects in anterior shoulder instability, best-fit circles based on affected glenoids do not always represent the native glenoid and may thus lead to inaccurate circle sizes and defect estimates.

High failure rate after conservative treatment for recurrent shoulder dislocation without subjective apprehension on physical examination.

PURPOSE: The purpose of this study was to investigate the outcomes of conservative treatment for recurrent shoulder dislocation without subjective apprehension, despite the presence of a Bankart lesion or glenoid defect. METHODS: A retrospective analysis was performed for 92 patients with recurrent shoulder dislocation treated with conservative treatment due to negative apprehension between 2009 and 2018. The failure of the conservative treatment was defined as a dislocation or subluxation episode or subjective feeling of instability based on a positive apprehension. The Kaplan-Meier method was used to estimate failure rates over time, and a receiver operating characteristic (ROC) curve was constructed to determine a cut-off value for a glenoid defect. The clinical outcomes were compared between patients who completed conservative treatment without recurrence of instability (Group A) and those who failed and subsequently underwent surgical treatment (Group B) using shoulder functional scores and sports/recreation activity level. RESULTS: This retrospective study included 61 of 92 eligible patients with recurrent shoulder dislocation. Among the 61 patients, conservative treatment failed in 46 (75.4%) over the 2-year study period. The cut-off value for a glenoid defect was 14.4%. The association between glenoid defect size (≥ 14.4% or as a continuous variable) and survival was statistically significant (p = 0.039 and p < 0.001, respectively). The mean glenoid defect size in Group B increased from 14.6 ± 3.0% to 17.3 ± 3.1% (p < 0.001), and clinical outcomes for Group A were inferior to those for Group B at the 24-month follow-up. CONCLUSIONS: Conservative treatment for recurrent shoulder dislocation in patients without subjective apprehension showed a high failure rate during the study period, especially if the glenoid defect was ≥ 14.4% in size. Despite clinical improvement in patients who completed conservative treatment without recurrence, functional outcome scores and sport/recreation activity levels were better in the patients who underwent arthroscopic Bankart repair. Therefore, for recurrent anterior shoulder instability, even without subjective apprehension, surgical treatment is warranted over conservative treatment. LEVEL OF EVIDENCE: Level IV.

Subscapularis tendon tears hidden by the medial biceps sling can be missed on arthroscopic examination.

INTRODUCTION: To investigate (1) the prevalence of "hidden lesions" and "non-hidden lesions" of subscapularis tendon tears requiring repair during arthroscopic examination that would be missed by a 30° arthroscope, but could be identified by a 70° arthroscope, from the standard posterior portal and (2) the correlation of preoperative internal rotation weakness and findings of magnetic resonance imaging (MRI) indicating hidden lesions. MATERIALS AND METHODS: We retrospectively examined 430 patients who underwent arthroscopic subscapularis repair between was initially nonvisible with a 30° arthroscope but became visible only with a 70° arthroscope from the standard posterior portal. The preoperative and intraoperative findings of the hidden lesion group (n = 82) were compared with those of the non-hidden lesion group (n = 348). 2016 and 2020. A hidden lesion was defined as a subscapularis tendon tear requiring repair that preoperative internal rotation weakness was assessed using the modified belly-press test. Preoperative MR images were reviewed using a systemic approach. RESULTS: The prevalence of hidden lesions was 19.1% (82/430). No significant difference was found in preoperative internal rotation weakness between the groups. Preoperative MRI showed a significantly lower detection rate in the hidden lesion group than in the non-hidden group (69.5% vs. 84.8%; P = 0.001). The hidden lesions were at a significantly earlier stage of subscapularis tendon tears than the non-hidden lesions, as revealed by the arthroscopic findings (Lafosse classification, degree of retraction; P = 0.003 for both) and MR findings (muscle atrophy, fatty infiltration; P = 0.001, P = 0.005, respectively). CONCLUSIONS: Among the subscapularis tears requiring repair, 19.1% could be identified by a 70° arthroscope, but not by a 30° arthroscope, through the posterior portal. The hidden lesions showed a significantly lower detection rate on preoperative MRI than the non-hidden lesions. Thus, for subscapularis tears suspected on preoperative physical examination, the 70° arthroscope would be helpful to avoid a misdiagnosis.

Synthesis and Characterization of MnO2@Cellulose and Polypyrrole-Decorated MnO2@Cellulose for the Detection of Chemical Warfare Agent Simulant.

Chemical warfare agents (CWAs) have been threatening human civilization and its existence because of their rapid response, toxic, and irreversible nature. The hybrid nanostructured composites were synthesized by the hydrothermal process to detect the dimethyl methyl phosphonate (DMMP), a simulant of G-series nerve agents, especially sarin. Cellulose (CE), manganese oxide cellulose (MnO2@CE), and MnO2@CE/polypyrrole (PPy) exhibited a frequency shift of 0.4, 4.8, and 8.9 Hz, respectively, for a DMMP concentration of 25 ppm in the quartz crystal microbalance (QCM). In surface acoustic wave (SAW) sensor, they exhibited 187 Hz, 276 Hz, and 78 Hz, respectively. A comparison between CE, MnO2@CE, and MnO2@CE/PPy demonstrated that MnO2@CE/PPy possesses excellent linearity with a coefficient of determination (COD or R2) of 0.992 and 0.9547 in the QCM and SAW sensor. The hybrid composite materials showed a reversible adsorption and desorption phenomenon in the reproducibility test. The response and recovery times indicated that MnO2@CE/PPy showed the shortest response (~23 s) and recovery times (~42 s) in the case of the QCM sensor. Hence, the pristine CE and its nanostructured composites were compared to analyze the sensing performance based on sensitivity, selectivity, linearity, reproducibility, and response and recovery times to detect the simulant of nerve agents.

Nano-Sheet-like Morphology of Nitrogen-Doped Graphene-Oxide-Grafted Manganese Oxide and Polypyrrole Composite for Chemical Warfare Agent Simulant Detection.

Chemical warfare agents (CWAs) have inflicted monumental damage to human lives from World War I to modern warfare in the form of armed conflict, terrorist attacks, and civil wars. Is it possible to detect the CWAs early and prevent the loss of human lives? To answer this research question, we synthesized hybrid composite materials to sense CWAs using hydrothermal and thermal reduction processes. The synthesized hybrid composite materials were evaluated with quartz crystal microbalance (QCM) and surface acoustic wave (SAW) sensors as detectors. The main findings from this study are: (1) For a low dimethyl methyl phosphonate (DMMP) concentration of 25 ppm, manganese dioxide nitrogen-doped graphene oxide (NGO@MnO2) and NGO@MnO2/Polypyrrole (PPy) showed the sensitivities of 7 and 51 Hz for the QCM sensor and 146 and 98 Hz for the SAW sensor. (2) NGO@MnO2 and NGO@MnO2/PPy showed sensitivities of more than 50-fold in the QCM sensor and 100-fold in the SAW sensor between DMMP and potential interferences. (3) NGO@MnO2 and NGO@MnO2/PPy showed coefficients of determination (R2) of 0.992 and 0.975 for the QCM sensor and 0.979 and 0.989 for the SAW sensor. (4) NGO@MnO2 and NGO@MnO2/PPy showed repeatability of 7.00 ± 0.55 and 47.29 ± 2.69 Hz in the QCM sensor and 656.37 ± 73.96 and 665.83 ± 77.50 Hz in the SAW sensor. Based on these unique findings, we propose NGO@MnO2 and NGO@MnO2/PPy as potential candidate materials that could be used to detect CWAs.

Pull-out Strength of Suture Anchor and Torque of Buddy Anchor for an Osteoporotic Humeral Head in Rotator Cuff Repair: Parallel Versus Divergent Insertion.

BACKGROUND: The buddy anchor technique is useful to reinforce loose anchors in the osteoporotic humeral head during arthroscopic rotator cuff repair. However, theoretical parallel insertion of the buddy anchor to index a loose anchor is challenging in arthroscopy and can widen the entry site and decrease structural integrity. PURPOSE: To investigate and compare the biomechanical stability between 2 buddy anchor insertion techniques (parallel insertion vs divergent insertion) in the osteoporotic humeral head. STUDY DESIGN: Controlled laboratory study. METHODS: A total of 24 paired fresh-frozen cadaveric shoulders were used, and each pair was randomly assigned to either the parallel insertion group or the divergent insertion group. In the parallel insertion group, the buddy anchor was inserted parallel to the index loose anchor. In the divergent insertion group, the buddy anchor was inserted at a 20° angle in the medial direction to the index loose anchor. The insertion torque of the buddy anchor and ultimate pull-out strength of the index anchor were measured and compared between the 2 groups. RESULTS: The mean maximum insertion torque was significantly higher in the parallel insertion group (16.1 ± 1.8 cN·m) compared with the divergent insertion group (12.0 ± 1.5 cN·m) (P < .001). The mean ultimate pull-out strength was significantly higher with divergent insertion (192.2 ± 28.6 N) than with parallel insertion (147.7 ± 23.6 N) (P < .001). CONCLUSION: For application of the buddy anchor system in the cadaveric osteoporotic humeral bone model, divergent insertion showed better ultimate pull-out strength than conventional parallel insertion, despite inferior maximum insertion torque. CLINICAL RELEVANCE: The results of this study widen the applicability and accessibility for the buddy anchor system.