RESUMEN
BACKGROUND: The healthcare water environment is a potential reservoir of carbapenem-resistant organisms (CROs). AIM: To report the role of the water environment as a reservoir and the infection control measures applied to suppress a prolonged outbreak of Klebsiella pneumoniae carbapenemase-producing Serratia marcescens (KPC-SM) in two intensive care units (ICUs). METHODS: The outbreak occurred in the ICUs of a tertiary hospital from October 2020 to July 2021. Comprehensive patient contact tracing and environmental assessments were conducted, and a case-control study was performed to identify factors associated with the acquisition of KPC-SM. Associations among isolates were assessed via pulsed-field gel electrophoresis (PFGE). Antibiotic usage was analysed. FINDINGS: The outbreak consisted of two waves involving a total of 30 patients with KPC-SM. Multiple environmental cultures identified KPC-SM in a sink, a dirty utility room, and a communal bathroom shared by the ICUs, together with the waste bucket of a continuous renal replacement therapy (CRRT) system. The genetic similarity of the KPC-SM isolates from patients and the environment was confirmed by PFGE. A retrospective review of 30 cases identified that the use of CRRT and antibiotics was associated with acquisition of KPC-SM (P < 0.05). There was a continuous increase in the use of carbapenems; notably, the use of colistin has increased since 2019. CONCLUSION: Our study demonstrates that CRRT systems, along with other hospital water environments, are significant potential sources of resistant micro-organisms, underscoring the necessity of enhancing infection control practices in these areas.
RESUMEN
OBJECTIVES: To investigate the concordance of results of blood and tissue cultures in patients with pyogenic spondylitis. METHODS: We searched for patients with pyogenic spondylitis in whom microorganisms were isolated from both blood and tissue cultures by retrospective review of medical records in three tertiary university-affiliated hospitals between January 2005 and December 2015. The species and antimicrobial susceptibility patterns of isolates from blood and tissue cultures were compared. RESULTS: Among 141 patients with pyogenic spondylitis in whom microorganisms were isolated from both blood and tissue cultures, the species of blood and tissue isolates were identical in 135 patients (95.7%, 135/141). Excluding the four anaerobic isolates, we investigated antimicrobial susceptibility patterns of 131 isolates of the same species from blood and tissue cultures. Antibiotic susceptibility patterns were identical in 128 patients (97.7%, 128/131). The most common isolates were Staphylococcus aureus (86 patients; 85 concordant and one discordant), followed by streptococcus (24 patients; 22 concordant and two discordant), and Escherichia coli (eight patients; all concordant). CONCLUSIONS: We suggest that a positive blood culture from patients with pyogenic spondylitis could preclude the need for additional tissue cultures, especially when S. aureus and streptococcus grew in blood cultures.
Asunto(s)
Bacterias/clasificación , Bacterias/aislamiento & purificación , Infecciones Bacterianas/microbiología , Sangre/microbiología , Columna Vertebral/microbiología , Espondilitis/microbiología , Adulto , Anciano , Anciano de 80 o más Años , Femenino , Hospitales Universitarios , Humanos , Masculino , Pruebas de Sensibilidad Microbiana , Persona de Mediana Edad , Estudios Retrospectivos , Adulto JovenRESUMEN
We present results of a systematic high-resolution transmission electron microscopy study of the thermal evolution of bundled single-walled carbon nanotubes (SWNTs) subjected to approximately 4-h high-temperature heat treatment (HTT) in a vacuum at successively higher temperatures up to 2200 degrees C. We have examined purified SWNT material derived from the HiPCO and ARC processes. These samples were found to thermally evolve along very different pathways that we propose depend on three factors: (1) initial diameter distribution, (2) concomitant tightness of the packing of the tubes in a bundle, and (3) the bundle size. Graphitic nanoribbons (GNR) were found to be the dominant high-temperature filament in ARC material after HTT = 2000 degrees C; they were not observed in any heat-treated HiPCO material. The first two major steps in the thermal evolution of HiPCO and ARC material agree with the literature, i.e., coalescence followed by the formation of multiwall carbon nanotubes (MWNTs). However, ARC material evolves to bundled MWNTs, while HiPCO evolves to isolated MWNTs. In ARC material, we find that the MWNTs collapse into multishell GNRs. The thermal evolution of these carbon systems is discussed in terms of the diameter distribution, nanotube coalescence pathways, C-C bond rearrangement, diffusion of carbon and subsequent island formation, as well as the nanotube collapse driven by van der Waals forces.
RESUMEN
High temperature heat treatment (HTT) of bundled single-walled carbon nanotubes (SWNTs) in vacuum ( approximately 10(-5) Torr) has been found to lead to the formation of two types of graphitic nanoribbons (GNRs), as observed by high-resolution transmission electron microscopy. Purified SWNT bundles were first found to follow two evolutionary steps, as reported previously, that is, tube coalescence (HTT approximately 1400 degrees C) and then massive bond rearrangement (HTT approximately 1600 degrees C), leading to the formation of bundled multiwall nanotubes (MWNTs) with 3-12 shells. At HTT > 1800 degrees C, we find that these MWNTs collapse into multishell GNRs. The first type of GNR we observed is driven by the collapse of diameter-doubled single-wall nanotubes, and their production is terminated at HTT approximately 1600 degrees C when the MWNTs also start to form. We propose that the collapse is driven by van der Waals forces between adjacent tubes in the same bundle. For HTT > 2000 degrees C, the heat-treated material is found to be almost completely in the multishell GNR form.
RESUMEN
The IR-active vibrational modes of single-walled carbon nanotubes have been observed by optical transmission through thin films of bundled nanotubes. Because IR-active chemical functional groups, e.g., -COOH, -OH, might be attached to the tube walls and contribute additional spectral features, we have also studied the effects of chemical purification and long-term high-temperature vacuum annealing on the IR spectrum. Through comparison with theory, we are able to assign much of the sharp structure observed in our IR spectra.
RESUMEN
Raman microprobe studies of long crystalline Si nanowires reveal for the first time the evolution of phonon confinement with wire diameter. The Raman band at approximately 520 cm-1 in bulk Si is found to downshift and asymmetrically broaden to lower frequency with decreasing wire diameter D, in good agreement with a phenomenological model first proposed by Richter et al. An adjustable parameter (alpha) is added to the theory that defines the width of the Gaussian phonon confinement function. We find that this parameter is not sensitive to diameter over the range 4-25 nm.
Asunto(s)
Cristalización/métodos , Modelos Químicos , Nanotecnología/métodos , Nanotubos/química , Silicio/química , Espectrometría Raman/métodos , Simulación por Computador , Ensayo de Materiales , Modelos Moleculares , Conformación Molecular , Nanotubos/análisis , Nanotubos/ultraestructura , Tamaño de la Partícula , Silicio/análisis , Relación Estructura-Actividad , VibraciónRESUMEN
Wet chemical methods involving ultrasound and amide solvents were used to purify and separate large bundles of single-walled carbon nanotubes (SWNTs) into individual nanotubes that could then be transported to silicon or mica substrates. The SWNTs studied were produced by the arc-discharge process. Dry oxidation was used in an initial step to remove amorphous carbon. Subsequently, two acid purification schemes were investigated (HCl- and HNO(3)-reflux) to remove the metal growth catalyst (Ni-Y). Finally, ultrasonic dispersion of isolated tubes into either N,N-dimethylformamide (DMF) or N-methyl-2-pyrrolidone (NMP) was carried out. Raman scattering, atomic force microscopy (AFM), and electron microscopy were used to study the evolution of the products. Raman scattering was used to probe possible wall damage during the chemical processing. We found that both HCl and HNO(3) could be used to successfully remove the Ni-Y below approximately 1 wt %. However, the HNO(3)-reflux produced significant wall damage (that could be reversed by vacuum annealing at 1000 degrees C). In the dispersion step, both amide solvents (DMF and NMP) produced a high degree of isolated tubes in the final product, and no damage during this dispersion step was observed. HNO(3)-refluxed tubes were found to disperse the best into the amide solvents, perhaps because of significant wall functionalization. AFM was used to study the filament diameter and length distributions in the final product, and interesting differences in these distributions were observed, depending on the chemical processing route.
RESUMEN
The human TCF12 gene, mapping to 15q21, encodes the helix-loop-helix transcription factor 4 (HTF4). A detailed analysis of this genomic region established the organization of the TCF12 gene. The gene includes 21 exons and is significantly larger than an average human gene. Preceding the second exon, two alternative acceptor sites for mRNA splicing yield two distinguishable transcripts (HTF4a and HTF4b) which differ in their 5' untranslated region but share identical coding sequences. Differential utilization of exon 15 in the TCF12 gene may reflect a mechanism producing a cell-type-specific protein (HTF4c). In addition, intron 5 in the TCF12 gene corresponds to the region involved in a translocation, t(9;15)(q22;q21), that results in a form of extraskeletal myxoid chondrosarcoma.
Asunto(s)
Proteínas de Unión al ADN/genética , Empalme del ARN/genética , Factores de Transcripción/genética , Región de Flanqueo 5'/genética , Secuencia de Aminoácidos , Secuencia de Bases , Factores de Transcripción con Motivo Hélice-Asa-Hélice Básico , Neoplasias Óseas/genética , Condrosarcoma/genética , Cromosomas Humanos Par 15 , Proteínas de Unión al ADN/química , Exones/genética , Humanos , Isomerismo , Datos de Secuencia Molecular , ARN Mensajero/genética , Factores de Transcripción/química , Translocación GenéticaRESUMEN
A new column packing material for ion-exchange chromatography was prepared from cellulose gel by periodate oxidation followed by chlorite oxidation to form spatially paired carboxyl groups (dicarboxyl cellulose, DCC). The carboxyl group was quantitatively introduced to spherical cellulose gel by controlling the extent of oxidation. The DCC gels were examined for their ion-exchange activity for various amines at pH of 2.5-5.5. In this pH range, aromatic amines with acid dissociation constant (pKa) below 2.7 showed no interaction with DCC gels as expected from their lack of protonation. The amines with pKa greater than 3.3, both aromatic and aliphatic, showed strong interaction corresponding to the amount of carboxyl introduced to the gel. However, these amines showed anomalous dependence on pH of the mobile phase, showing a maximum in retention factor at around pH 4. This is in contrast with the nearly constant retention factor of these amines on conventional carboxylated cellulose packing at pH greater than 4.0. The maximum retention factor at pH 4 of DCC gel was 4-5-times greater than that of conventional gel having a similar amount of carboxyls. Since pKa of dicarboxyl groups ranges 3-5 as determined by acid-base titration, the pH giving maximum retention corresponds to the pH at which one of paired carboxyls is dissociated. Possible cause of this anomaly is presented in terms of dissociation state of dicarboxyl groups and its interaction with amines.
Asunto(s)
Celulosa/química , Cromatografía en Gel/métodos , Cromatografía por Intercambio Iónico/métodos , Calibración , Geles , Concentración de Iones de Hidrógeno , Oxidación-ReducciónRESUMEN
OBJECTIVE: Histamine N-methyltransferase (HNMT) catalyzes the Ntau-methylation of histamine. We set out to clone a mouse liver HNMT cDNA and the mouse HNMT gene as steps toward characterizing molecular genetic mechanisms involved in the regulation of this important histamine-metabolizing enzyme. DESIGN: A PCR-based strategy was used to clone both the mouse HNMT cDNA and the gene encoding that cDNA, Hnmt. The cDNA was used both to express recombinant mouse HNMT and to determine the chromosomal localization of Hnmt. RESULTS: The mouse liver HNMT cDNA was 1657 bp in length with an 888 bp open reading frame (ORF) that encoded a 296 amino acid protein with a predicted Mr value of approximately 32.5 kDa. The amino acid sequence of the encoded protein was 84% identical to that of human kidney HNMT. Mouse HNMT was expressed in COS-1 cells, and its apparent Km values for histamine and S-adenosyl-L-methionine (Ado-Met), the two cosubstrates for the reaction, were 5.3 and 5.8 microM, respectively. The mouse HNMT gene, Hnmt, spanned approximately 25 kb and had 7 exons. Its structure differed from that of the human gene primarily by the presence of an additional exon at the 5'-terminus. Hnmt mapped to mouse chromosome 2 in an area of conserved synteny to human chromosome 2q, the location of the human gene (2q22) on the basis of fluorescence in situ hybridization. CONCLUSIONS: Cloning and functional characterization of the mouse HNMT cDNA and gene will now make it possible to study in the mouse molecular genetic mechanisms involved the regulation of this important histamine-metabolizing enzyme.
Asunto(s)
Mapeo Cromosómico , Histamina N-Metiltransferasa/genética , Secuencia de Aminoácidos , Animales , Clonación Molecular , Humanos , Hígado/enzimología , Ratones , Datos de Secuencia Molecular , Proteínas Recombinantes/biosíntesisRESUMEN
We have placed 7,600 cytogenetically defined landmarks on the draft sequence of the human genome to help with the characterization of genes altered by gross chromosomal aberrations that cause human disease. The landmarks are large-insert clones mapped to chromosome bands by fluorescence in situ hybridization. Each clone contains a sequence tag that is positioned on the genomic sequence. This genome-wide set of sequence-anchored clones allows structural and functional analyses of the genome. This resource represents the first comprehensive integration of cytogenetic, radiation hybrid, linkage and sequence maps of the human genome; provides an independent validation of the sequence map and framework for contig order and orientation; surveys the genome for large-scale duplications, which are likely to require special attention during sequence assembly; and allows a stringent assessment of sequence differences between the dark and light bands of chromosomes. It also provides insight into large-scale chromatin structure and the evolution of chromosomes and gene families and will accelerate our understanding of the molecular bases of human disease and cancer.
Asunto(s)
Aberraciones Cromosómicas , Marcadores Genéticos , Genoma Humano , Mapeo Cromosómico , Cromosomas Artificiales Bacterianos , Análisis Citogenético , Proyecto Genoma Humano , Humanos , Hibridación Fluorescente in Situ , Mapeo de Híbrido por Radiación , Lugares Marcados de SecuenciaRESUMEN
We have used sequence-based markers from an integrated YAC STS-content/somatic cell hybrid breakpoint physical map and radiation hybrid maps of human chromosome 16 to construct a new sequence-ready BAC map of the long arm of this chromosome. The integrated physical map was generated previously in our laboratory and contains 1150 STSs, providing a marker on average every 78 kb on the euchromatic arms of chromosome 16. The other two maps used for this effort were the radiation hybrid maps of chromosome 16 from Whitehead Institute and Stanford University. To create large sequenceable targets of this chromosome, we used a systematic approach to screen high-density BAC filters with probes generated from overlapping oligonucleotides (overgos). We first identified all available sequences in the three maps. These include sequences from genes, ESTs, STSs, and cosmid end sequences. We then used BLASTto identify 36-bp unique fragments of DNA for overgo probes. A total of 906 overgos were selected from the long arm of chromosome 16. Hybridizations occurred in three stages: (1) superpool hybridizations against the 12x coverage human BAC library (RPCI-11); (2) two-dimensional hybridizations against rearrayed positive BACs identified in the superpool hybridizations; and (3) pooled tertiary hybridizations for those overgos that had ambiguous positives remaining after the two-dimensional hybridization. For the superpool hybridizations, up to 236 overgos have been pooled in a single hybridization against the 12x BAC library. A total of 5187 positive BACs from chromosome 16q were identified as a result of five superpool hybridizations. These positive clones were rearrayed on membranes and hybridized with 161 two-dimensional subpools of overgos to determine which BAC clones were positive for individual overgos. An additional 46 tertiary hybridizations were required to resolve ambiguous overgo-BAC relationships. Thus, after a total of 212 hybridizations, we have constructed an initial probe-content BAC map of chromosome 16q consisting of 828 overgo markers and 3363 BACs providing >85% coverage of the long arm of this chromosome. The map has been confirmed by the fingerprinting data and BAC end PCR screening.
Asunto(s)
Cromosomas Bacterianos/genética , Cromosomas Humanos Par 16/genética , Mapeo Contig/métodos , Humanos , Hibridación de Ácido Nucleico/métodos , Reproducibilidad de los Resultados , Mapeo Restrictivo , Lugares Marcados de SecuenciaRESUMEN
Sulfate conjugation catalyzed by sulfotransferase (SULT) enzymes is an important pathway in the biotransformation of many drugs, other xenobiotics, neurotransmitters, and hormones. We previously described a human cDNA, SULT1C1, that encoded a protein similar in sequence to that of rat ST1C1. Subsequently, a related human cDNA, SULT1C2, was reported. In the present study, we set out to characterize further the human SULT1C1 cDNA and then to clone, structurally characterize, and map its gene. As an initial step, we performed 5'- and 3'-RACE with SULT1C1 cDNA. Those experiments demonstrated that a small number of SULT1C1 transcripts contained an "insert," which we later showed resulted from alternative splicing that involved an Alu sequence in intron 3 of SULT1C1. We then cloned and structurally characterized the SULT1C1 gene from a human genomic BAC library. Because the sequence of SULT1C2 was closely related to that of SULT1C1 and because the genes for other human SULT paralogues occur in clusters, we screened the BAC clones that had been positive for SULT1C1 to search for SULT1C2 and discovered a clone that contained both genes. That BAC was used to sequence and structurally characterize SULT1C2. SULT1C1 and SULT1C2 were approximately 21 and 10 kb in length, respectively. Both genes contained seven exons that encoded protein, and both had structures that were similar to those of other genes that encode members of the SULT1 family. Finally, human SULT1C1 and SULT1C2 mapped to 2q11.2 by fluorescence in situ hybridization. The cloning and structural characterization of SULT1C1 and SULT1C2 will now make it possible to perform molecular genetic and pharmacogenomic studies of these sulfate-conjugating enzymes in humans.
Asunto(s)
Isoenzimas/genética , Sulfotransferasas/genética , Animales , Células COS , Mapeo Cromosómico , Cromosomas Humanos Par 2 , Clonación Molecular , ADN Complementario/metabolismo , Exones , Feto/química , Biblioteca de Genes , Humanos , Hibridación Fluorescente in Situ , Riñón/química , Pulmón/química , Datos de Secuencia Molecular , Reacción en Cadena de la Polimerasa , Regiones Promotoras Genéticas , Estómago/química , Especificidad por Sustrato , Sulfotransferasas/biosíntesis , Glándula Tiroides/química , Transcripción Genética , TransfecciónRESUMEN
Rapid construction of high-resolution physical maps requires accurate information about overlap between DNA clones and the size of gaps between clones or clone contigs. We recently developed a procedure termed 'quantitative DNA fiber mapping' (QDFM) to help construct physical maps by measuring the overlap between clones or the physical distance between non-overlapping contigs. QDFM is based on hybridization of non-isotopically labeled probes onto DNA molecules that were bound to a solid support and stretched homogeneously to approximately 2.3 kb/microm. In this paper, we describe the design of probes that bind specifically to the cloning vector of DNA recombinants to facilitate physical mapping. Probes described here delineate the most frequently used cloning vectors such as BACs, P1s, PACs and YACs. As demonstrated in representative hybridizations, vector-specific probes provide valuable information about molecule integrity, insert size and orientation as well as localization of hybridization domains relative to specifically-marked vector sequences.
Asunto(s)
Mapeo Físico de Cromosoma/métodos , Cromosomas Artificiales de Levadura , Cromosomas Bacterianos , Clonación Molecular , ADN/genética , ADN/metabolismo , Cartilla de ADN , Sondas de ADN , Vectores Genéticos , Humanos , Hibridación Fluorescente in Situ , Plásmidos , Reacción en Cadena de la Polimerasa , Análisis de Secuencia de ADNRESUMEN
Sulfae conjugation is an important pathway in the metabolism of a large number of exogenous and endogenous compounds. These reactions are catalyzed by sulfotransferase (SULT) enzymes that utilize 3'-phosphoadenosine 5'-phosphosulfate (PAPS) as a sulfate donor. PAPS is synthesized from ATP and inorganic sulfate by PAPS synthetase (PAPSS). Two separate PAPSS cDNAs, PAPSS1 and PAPSS2, have been identified in human tissues. We have cloned and characterized the genes for human PAPSS1 and PAPSS2 to make it possible to study the pharmacogenomics of these enzymes. Both genes consisted of 12 exons with virtually identical exon-intron splice junction locations. All splice junctions conformed to the "GT-AG" rule. The total length of PAPSS1 was approximately 108 kb, while that of PAPSS2 was greater than 37 kb. The 5'-flanking region of PAPSS1 did not include a TATA box sequence near the site of transcription initiation, but PAPSS2 had a TATA motif located 21 bp upstream from the site of transcription initiation. Northern blot analysis showed that the major PAPSS1 and PAPSS2 transcripts were approximately 2.7 and 4.2 kb in length, respectively. PAPSS1 mapped to human chromosome band 4q24 while PAPSS2 mapped to 10q22-23 by fluorescence in situ hybridization analysis. Cloning and structural characterization of PAPSS1 and PAPSS2 will make it possible to perform molecular genetic and pharmacogenomic studies of these important enzymes in humans.
Asunto(s)
Cromosomas Humanos Par 4 , Complejos Multienzimáticos/genética , Sulfato Adenililtransferasa/genética , Northern Blotting , Mapeo Cromosómico , Clonación Molecular , Genoma Humano , Humanos , Datos de Secuencia Molecular , Filogenia , Polimorfismo GenéticoRESUMEN
Conversion of 1,2-dihydroxyl groups to dialdehyde by periodate oxidation is a useful method of derivatizing polysaccharides but has not been extensively utilized in derivatization of cellulose because of complicacy due to the crystalline nature of cellulose. To understand the influence of cellulose crystallinity on this reaction, we investigated how the periodate oxidation proceeds with a highly crystalline cellulose of the marine alga Cladophora sp. The crystallinity of the oxidized cellulose, determined by X-ray diffraction, decreased according to the oxidation level. The half-height widths of equatorial diffraction peaks were nearly unchanged. The solid-state 13C NMR spectra did not show peaks corresponding to aldehyde groups, but solution 13C NMR spectra showed the presence of dicarboxylic groups after subsequent oxidation by sodium chlorite. Transmission electron microscopy showed that microfibrils of Cladophora tended to be bent and more flexible than the original sample. Gold labeling of the aldehyde groups, mediated by thiosemicarbazide derivatization, revealed a highly uneven distribution of dialdehyde groups. When treated by 50% (w/v) sulfuric acid, partially oxidized Cladophora cellulose gave many short fragments of microfibril. These features indicate that the periodate oxidation proceeds by forming dialdehyde groups in longitudinally spaced, bandlike domains.
Asunto(s)
Celulosa/química , Ácido Peryódico/química , Aldehídos/química , Chlorophyta/química , Cristalografía por Rayos X , Ácidos Dicarboxílicos/química , Hidrólisis , Espectroscopía de Resonancia Magnética , Microscopía Electrónica , Oxidación-Reducción , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
Indolethylamine N-methyltransferase (INMT) catalyzes the N-methylation of tryptamine and structurally related compounds. We recently cloned and characterized the rabbit INMT cDNA and gene as a step toward cloning the cDNA and gene for this enzyme in humans. We have now used a PCR-based approach to clone a human INMT cDNA that had a 792-bp open reading frame that encoded a 263-amino-acid protein 88% identical in sequence to rabbit INMT. Northern blot analysis of 35 tissues showed that a 2.7-kb INMT mRNA species was expressed in most tissues. When the cDNA was expressed in COS-1 cells, the recombinant enzyme catalyzed the methylation of tryptamine with an apparent K(m) value of 2.9 mM. The human cDNA was then used to clone the human INMT gene from a human genomic BAC library. The gene was 5471 bp in length, consisted of three exons, and was structurally similar to the rabbit INMT gene as well as genes for nicotinamide N-methyltransferase and phenylethanolamine N-methyltransferase in several species. All INMT exon-intron splice junctions conformed to the "GT-AG" rule, and no canonical TATA or CAAT sequences were present within the 5'-flanking region of the gene. Human INMT mapped to chromosome 7p15.2-p15.3 on the basis of both PCR analysis and fluorescence in situ hybridization. Finally, two possible single nucleotide polymorphisms were identified within exon 3, both of which altered the encoded amino acid. The cloning and expression of a human INMT cDNA, as well as the cloning, structural characterization, and mapping of its gene represent steps toward future studies of the function and regulation of this methyltransferase enzyme in humans.
Asunto(s)
Mapeo Cromosómico , Clonación Molecular , Metiltransferasas/genética , Metiltransferasas/metabolismo , Secuencia de Aminoácidos , Animales , Secuencia de Bases , Northern Blotting , Western Blotting , Células COS , Cartilla de ADN , ADN Complementario/genética , Humanos , Metiltransferasas/química , Datos de Secuencia Molecular , Sistemas de Lectura Abierta/genética , Conejos , Proteínas Recombinantes/metabolismo , Alineación de SecuenciaRESUMEN
A total of 55 expressed sequence tags (ESTs) randomly chosen from our collection of fetal liver ESTs were mapped to chromosomes by fluorescence in situ hybridization (FISH) mapping techniques. To generate FISH mapping probes, the genomic DNAs for each EST were selected by screening an arrayed human bacterial artificial chromosome (BAC) library. In total, 73 BACs were used for mapping of the 55 ESTs. Among them, 70 BACs representing 52 ESTs unequivocally mapped to single chromosomal regions. The remaining 3 BACs representing 3 ESTs were localized to multiple regions, suggesting that BACs may have very low chimerism. Our mapping results were compared with EST mapping databases deposited in NCBI. Thirty-six of 55 ESTs corresponded to previously mapped positions of ESTs, 2 ESTs mapped to different positions from previously determined ones, and it was found that 17 ESTs have been mapped on new locations from this study. These mapping data may be used for completing the framework of the human physical map, and also for providing a good starting point for searching disease-related genes.
Asunto(s)
Mapeo Cromosómico , Cromosomas Bacterianos/genética , Etiquetas de Secuencia Expresada , Hibridación Fluorescente in Situ , Hígado/embriología , Hígado/metabolismo , Southern Blotting , ADN Complementario/análisis , Bases de Datos Factuales , Humanos , Hibridación de Ácido Nucleico , Mapeo Físico de Cromosoma , Reproducibilidad de los Resultados , Lugares Marcados de SecuenciaRESUMEN
Several publicly funded large-scale sequencing efforts have been initiated with the goal of completing the first reference human genome sequence by the year 2005. Here we present the results of analysis of 11.8 Mb of genomic sequence from chromosome 16. The apparent gene density varies throughout the region, but the number of genes predicted (84) suggests that this is a gene-poor region. This result may also suggest that the total number of human genes is likely to be at the lower end of published estimates. One of the most interesting aspects of this region of the genome is the presence of highly homologous, recently duplicated tracts of sequence distributed throughout the p-arm. Such duplications have implications for mapping and gene analysis as well as the predisposition to recurrent chromosomal structural rearrangements associated with genetic disease.