RESUMEN
Aging and lack of exercise are the most important etiological factors for muscle loss. We hypothesized that new factors that contribute to muscle loss could be identified from ones commonly altered in expression in aged and exercise-limited skeletal muscles. Mouse gastrocnemius muscles were subjected to mass spectrometry-based proteomic analysis. The muscle proteomes of hindlimb-unloaded and aged mice were compared to those of exercised and young mice, respectively. C1qbp expression was significantly upregulated in the muscles of both hindlimb-unloaded and aged mice. In vitro myogenic differentiation was not affected by altering intracellular C1qbp expression but was significantly suppressed upon recombinant C1qbp treatment. Additionally, recombinant C1qbp repressed the protein level but not the mRNA level of NFATc1. NFATc1 recruited the transcriptional coactivator p300, leading to the upregulation of acetylated histone H3 levels. Furthermore, NFATc1 silencing inhibited p300 recruitment, downregulated acetylated histone H3 levels, and consequently suppressed myogenic differentiation. The expression of C1qbp was inversely correlated with that of NFATc1 in the gastrocnemius muscles of exercised or hindlimb-unloaded, and young or aged mice. These findings demonstrate a novel role of extracellular C1qbp in suppressing myogenesis by inhibiting the NFATc1/p300 complex. Thus, C1qbp can serve as a novel therapeutic target for muscle loss.
Asunto(s)
Desarrollo de Músculos , Músculo Esquelético , Factores de Transcripción NFATC , Animales , Masculino , Ratones , Acetilación , Diferenciación Celular , Histonas/metabolismo , Ratones Endogámicos C57BL , Desarrollo de Músculos/genética , Músculo Esquelético/metabolismo , Factores de Transcripción NFATC/metabolismo , Factores de Transcripción NFATC/genéticaRESUMEN
The cytotoxic mycotoxin deoxynivalenol (DON) reportedly has adverse effects on oocyte maturation and embryonic development in pigs. Recently, the interplay between cell apoptosis and endoplasmic reticulum (ER) stress has garnered increasing attention in embryogenesis. However, the involvement of the inositol-requiring enzyme 1 (IRE1)/c-jun N-terminal kinase (JNK)/C/EBP homologous protein (CHOP) pathways of unfolded protein response (UPR) signaling in DON-induced apoptosis in porcine embryos remains unknown. In this study, we revealed that exposure to DON (0.25 µM) substantially decreased cell viability until the blastocyst stage in porcine embryos, concomitant with initiation of cell apoptosis through the IRE1/JNK/CHOP pathways in response to ER stress. Quantitative PCR confirmed that UPR signaling-related transcription factors were upregulated in DON-treated porcine blastocysts. Western blot analysis showed that IRE1/JNK/CHOP signaling was activated in DON-exposed porcine embryos, indicating that ER stress-associated apoptosis was instigated. The ER stress inhibitor tauroursodeoxycholic acid protected against DON-induced ER stress in porcine embryos, indicating that the toxic effects of DON on early developmental competence of porcine embryos can be prevented. In conclusion, DON exposure impairs the developmental ability of porcine embryos by inducing ER stress-mediated apoptosis via IRE1/JNK/CHOP signaling.
Asunto(s)
Apoptosis , Estrés del Retículo Endoplásmico , Factor de Transcripción CHOP , Tricotecenos , Animales , Estrés del Retículo Endoplásmico/efectos de los fármacos , Apoptosis/efectos de los fármacos , Factor de Transcripción CHOP/metabolismo , Factor de Transcripción CHOP/genética , Porcinos , Tricotecenos/toxicidad , Proteínas Quinasas JNK Activadas por Mitógenos/metabolismo , Proteínas Quinasas JNK Activadas por Mitógenos/genética , Proteínas Serina-Treonina Quinasas/metabolismo , Proteínas Serina-Treonina Quinasas/genética , Transducción de Señal/efectos de los fármacos , Embrión de Mamíferos/efectos de los fármacos , Respuesta de Proteína Desplegada/efectos de los fármacos , Blastocisto/efectos de los fármacos , Blastocisto/metabolismo , FemeninoRESUMEN
This study investigated the synergistic effect of carbon black/multi-wall carbon nanotube (CB/MWCNT) hybrid fillers on the physical and mechanical properties of Ethylene propylene diene rubber (EPDM) composites after exposure to high-pressure hydrogen gas. The EPDM/CB/CNT hybrid composites were prepared by using the EPDM/MWCNT master batch (MB) with 10 phr CNTs to enhance the dispersion of CNTs in hybrid composites. The investigation included a detailed analysis of cure characteristics, crosslink density, Payne effect, mechanical properties, and hydrogen permeation properties. After exposure to 96.3 MPa hydrogen gas, the hydrogen uptake and the change in volume and mechanical properties of the composites were assessed. We found that as the MWCNT volume fraction in fillers increased, the crosslink density, filler-filler interaction, and modulus of hybrid composites increased. The hydrogen uptake and the solubility of the composites decreased with an increasing MWCNT volume fraction in fillers. Moreover, after exposure to hydrogen gas, the change in volume and mechanical properties exhibited a diminishing trend with a higher MWCNT volume fraction. We conclude that the hybridization of CB and CNTs formed strong filler-filler networks in hybrid composites, consequently reinforcing the EPDM composites and enhancing the barrier properties of hydrogen gas.
RESUMEN
Atmospheric deposition of nitrogen is one of the most important external nutrient sources. We investigated the concentrations of NO3- and NH4+ in airborne particles at both an offshore and an inshore site in the Yellow Sea. At the offshore site, devoid of local sources and located downwind from the highly developed areas of Korea and China, the concentrations of atmospheric particulate NO3- and NH4+ were â¼88 ± 101 nmol m-3 and â¼102 ± 102 nmol m-3, respectively, likely due to the transboundary long-range transport of pollutants. The inshore site showed a concentration â¼2 times higher than the offshore site. Considering not only dry inorganic nitrogen deposition but also wet and organic material deposition, the total atmospheric nitrogen deposition was estimated to contribute roughly 10 % to the new production in the Yellow Sea.
Asunto(s)
Contaminantes Atmosféricos , Contaminantes Atmosféricos/análisis , Nitrógeno/análisis , Polvo/análisis , China , Monitoreo del AmbienteRESUMEN
Accurately constraining the natural variability of the carbonate system is essential for evaluating long-term changes in coastal areas, which result from the absorption of anthropogenic CO2. This is particularly important given the significant variation in physical and biological processes in these regions. In this regard, the analysis of surface carbonate chemistry in the Yellow Sea was conducted using discrete seawater samples obtained from the Socheongcho Ocean Research Station (37.423°N, 124.738°E) between 2017 and 2022. Our bottle data and sensor pH measurements revealed considerable seasonal variations of aragonite saturation state (ΩAR), typically ranging from 1.6 to 3.9. These variations are particularly pronounced during the summer and early winter. Our dataset serves as a baseline for understanding the long-term changes in ocean acidification in the Yellow Sea, the complex biogeochemical processes in coastal areas, and their impact on ocean acidification.
Asunto(s)
Carbonato de Calcio , Agua de Mar , Carbonato de Calcio/análisis , Concentración de Iones de Hidrógeno , Dióxido de Carbono/análisis , Carbonatos/análisis , Océanos y MaresRESUMEN
Ochratoxin A (OTA), a mycotoxin found in foods, has a deleterious effect on female reproduction owing to its endocrine-disrupting activity mediated through endoplasmic reticulum (ER) stress and reactive oxygen species (ROS) production. However, the mechanisms of OTA-induced ER stress in pig embryos during in vitro culture (IVC) are not yet fully understood. In the present study, porcine embryos were cultured for two days in an IVC medium supplemented with 0.5, 1.0, and 5.0 µM OTA, which led to an OTA-induced reduction in the developmental rate of blastocysts. The mRNA-seq transcriptome analysis revealed that the reduced blastocyst development ability of OTA-exposed porcine embryos was caused by ER stress, ultimately resulting in the accumulation of ROS and the occurrence of apoptosis. The expression levels of some UPR/PERK signaling-related genes (DDIT3, EIF2AK3, EIF2S1, NFE2L2, ATF4, EIF2A, and KEAP1) were found to differ in OTA-exposed pig embryos. OTA induces DNA damage by triggering an increase in RAD51/γ-H2AX levels and suppressing p-NRF2 activity. This effect is mediated through intracellular ROS and superoxide accumulation in the nuclei of porcine embryos. The cytotoxicity of OTA increased the activation of the PERK signal pathways (p-PERK, PERK, p-eIF2α, eIF2α, ATF4, and CHOP) in porcine embryos, with abnormal distribution of the ER observed around the nucleus. Collectively, our findings indicate that ER stress is a major cause of decline in the development of porcine embryos exposed to OTA. Therefore, OTA exposure induces ER stress and DNA damage via oxidative stress by disrupting PERK/NRF2 signaling activity in the developmental competence of porcine embryos during IVC.
Asunto(s)
Estrés del Retículo Endoplásmico , Factor 2 Relacionado con NF-E2 , Ocratoxinas , Femenino , Animales , Porcinos , Factor 2 Relacionado con NF-E2/genética , Factor 2 Relacionado con NF-E2/metabolismo , Proteína 1 Asociada A ECH Tipo Kelch/metabolismo , Especies Reactivas de Oxígeno/metabolismo , Transducción de Señal , Daño del ADN , ApoptosisRESUMEN
Polyethylene (PE) is widely used as a gas-sealing material in packing films and gas transport pipes. A technique for evaluating the permeability of water-insoluble gases has recently been developed. This technique is a volumetric analysis that is used to calculate the gas permeability by measuring the gas uptake and diffusivity. With this technique, we investigated the permeability of pure gases, such as H2, He, N2, O2 and Ar, enriched under high pressure up to 9 MPa in low-density polyethylene (LDPE), ultrahigh molecular weight polyethylene (UHMWPE) and high-density polyethylene (HDPE). The gas uptake showed a linear pressure-dependent behavior that followed Henry's law, and the diffusivity was independent of the pressure. Furthermore, the logarithmic diffusivity values of the five gases linearly decreased as their molecular kinetic diameters increased. The logarithmic solubility values linearly increased as the critical temperatures of the gases increased. The calculated permeability results were correlated with the volume fraction of the amorphous phase and the fractional free volume. This result newly showed that the amorphous phase was directly correlated to the fractional free volume.
RESUMEN
In wearable bioelectronics, various studies have focused on enhancing prosthetic control accuracy by improving the quality of physiological signals. The fabrication of conductive composites through the addition of metal fillers is one way to achieve stretchability, conductivity, and biocompatibility. However, it is difficult to measure stable biological signals using these soft electronics during physical activities because of the slipping issues of the devices, which results in the inaccurate placement of the device at the target part of the body. To address these limitations, it is necessary to reduce the stiffness of the conductive materials and enhance the adhesion between the device and the skin. In this study, we measured the electromyography (EMG) signals by applying a three-layered hydrogel structure composed of chitosan-alginate-chitosan (CAC) to a stretchable electrode fabricated using a composite of styrene-ethylene-butylene-styrene and eutectic gallium-indium. We observed stable adhesion of the CAC hydrogel to the skin, which aided in keeping the electrode attached to the skin during the subject movement. Finally, we fabricated a multichannel array of CAC-coated composite electrodes (CACCE) to demonstrate the accurate classification of the EMG signals based on hand movements and channel placement, which was followed by the movement of the robot arm.
RESUMEN
A new target that stimulates bone formation is needed to overcome limitations of current anti-osteoporotic drugs. Myokines, factors secreted from muscles, may modulate it. In this study, we investigated the role of aortic carboxypeptidase-like protein (ACLP), which is highly expressed in skeletal muscles, on bone formation. MC3T3-E1 cells and/or calvaria osteoblasts were treated with recombinant N-terminal mouse ACLP containing a signal peptide [rmACLP (N)]. The expression and secretion of ACLP were higher in skeletal muscle and differentiated myotube than in other tissues and undifferentiated myoblasts, respectively. rmACLP (N) increased bone formation, ALP activity, and phosphorylated p38 mitogen-activated protein (MAP) kinase in osteoblasts; reversal was achieved by pre-treatment with a TGF-ß receptor inhibitor. Under H2 O2 treatment, rmACLP (N) increased osteoblast survival, phosphorylated p38 MAP kinase, and the nuclear translocation of FoxO3a in osteoblasts. H2 O2 treatment caused rmACLP (N) to suppress its apoptotic, oxidative, and caspase-9 activities. rmACLP (N)-stimulated osteoblast survival was reversed by pre-treatment with a p38 inhibitor, a TGF-ß-receptor II blocking antibody, and a FoxO3a shRNA. Conditioned media (CM) from muscle cells stimulated osteoblast survival under H2 O2 treatment, in contrast to CM from ACLP knockdown muscle cells. rmACLP (N) increased the expressions of FoxO3a target anti-oxidant genes such as Sod2, Trx2, and Prx5. In conclusion, ACLP stimulated the differentiation and survival of osteoblasts. This led to the stimulation of bone formation by the activation of p38 MAP kinase and/or FoxO3a via TGF-ß receptors. These findings suggest a novel role for ACLP in bone metabolism as a putative myokine.
Asunto(s)
Carboxipeptidasas , Proteínas Quinasas p38 Activadas por Mitógenos , Animales , Ratones , Diferenciación Celular/fisiología , Carboxipeptidasas/metabolismo , Proteínas Quinasas p38 Activadas por Mitógenos/metabolismo , Osteogénesis , Osteoblastos/metabolismo , FosforilaciónRESUMEN
Reinforcement learning is one of the artificial intelligence methods that enable robots to judge and operate situations on their own by learning to perform tasks. Previous reinforcement learning research has mainly focused on tasks performed by individual robots; however, everyday tasks, such as balancing tables, often require cooperation between two individuals to avoid injury when moving. In this research, we propose a deep reinforcement learning-based technique for robots to perform a table-balancing task in cooperation with a human. The cooperative robot proposed in this paper recognizes human behavior to balance the table. This recognition is achieved by utilizing the robot's camera to take an image of the state of the table, then the table-balance action is performed afterward. Deep Q-network (DQN) is a deep reinforcement learning technology applied to cooperative robots. As a result of learning table balancing, on average, the cooperative robot showed a 90% optimal policy convergence rate in 20 runs of training with optimal hyperparameters applied to DQN-based techniques. In the H/W experiment, the trained DQN-based robot achieved an operation precision of 90%, thus verifying its excellent performance.
Asunto(s)
Inteligencia Artificial , Robótica , Humanos , Robótica/métodosRESUMEN
This study explored bereaved parents' responses to their child's death in the 2014 Sewol Ferry sinking incident, focusing on identifying changes in parental self-identity two and five years after their loss. To understand the unique meaning of their loss and its impact on their self-perception, in-depth interviews were conducted with eight mothers and four fathers at two timepoints. Three patterns of parental self-identity: reintegration, disintegration, and coexistence emerged. Patterns emerged in five domains: (a) relational identity, (b) physical identity, (c) financial identity, (d) professional identity and (e) spiritual identity. Each of these domain-associated themes provided insights into the patterns and characteristics of the changes in bereaved parents' self-identity following their loss. Recommendations for future research and potential implications are discussed.
Asunto(s)
Aflicción , Femenino , Humanos , Niño , Adolescente , Padres , Madres , Autoimagen , Relaciones Padres-HijoRESUMEN
In bioelectronics, stretchable and self-healable electrodes can reliably measure electrophysiological signals from the human body because they have good modulus matching with tissue and high durability. In particular, the polymer-graphene composite has advantages when it is used as an electrode for bioelectronic sensor devices. However, it has previously been reported that external stimuli such as heat or light are required for the self-healing process of polymer/graphene composites. In this study, we optimized a conducting composite by mixing a self-healing polymer (SHP) and graphene. The composite materials can not only self-heal without external stimulation but also have rapid electrical recovery from repeated mechanical damage such as scratches. In addition, they had stable electrical endurance even when the cyclic test was performed over 200 cycles at 50% strain, so they can be useful for a bioelectronic sensor device with high durability. Finally, we measured the electromyogram signals caused by the movement of arm muscles using our composite, and the measured data were transmitted to a microcontroller to successfully control the movement of the robot's hand.
RESUMEN
The reversibly stable formation and rupture processes of electrical percolative pathways in organic and inorganic insulating materials are essential prerequisites for operating non-volatile resistive memory devices. However, such resistive switching has not yet been reported for dynamically cross-linked polymers capable of intrinsic stretchability and self-healing. This is attributable to the uncontrollable interplay between the conducting filler and the polymer. Herein, we present the development of the self-healing, stretchable, and reconfigurable resistive random-access memory. The device was fabricated via the self-assembly of a silver-gradient nanocomposite bilayer which is capable of easily forming the metal-insulator-metal structure. To realize stable resistive switching in dynamic molecular networks, our device features the following properties: i) self-reconstruction of nanoscale conducting fillers in dynamic hydrogen bonding for self-healing and reconfiguration and ii) stronger interaction among the conducting fillers than with polymers for the formation of robust percolation paths. Based on these unique features, we successfully demonstrated stable data storage of cardiac signals, damage-reliable memory triggering system using a triboelectric energy-harvesting device, and touch sensing via pressure-induced resistive switching.
RESUMEN
Liquid metals not only have the electrical property of conductivity, but they also have a unique characteristic of existing in a liquid state at room temperature, unlike ordinary stiff solid metals. However, in bioelectronics, the modulus matching well between a device and skin or tissue is considered very advantageous, because high-quality biological signals can be recorded. Therefore, it is possible to implement soft electronics with stable and robust electrical characteristics by using LM as a conductive liquid-state filler. In this study, we changed a type of liquid metal, Eutectic Gallium Indium (EGaIn), into a particle form via tip sonication and mixed it with a solution that dissolved Styrene-Ethylene-Butylene-Styrene (SEBS) in toluene to fabricate a composite. The EGaIn-SEBS composite has high conductivity, excellent electrical durability under mechanically harsh conditions, and a degree of modulus similar to that of bare SEBS, which is lower than that of solid-filler-based SEBS composite. Finally, we demonstrated electrocardiogram signal monitoring using an EGaIn-Alginate two-layer electrode (EATE) that was fabricated by simply coating the surface of the composite with alginate hydrogel, which demonstrates excellent performance in bioelectronics.
RESUMEN
In this paper, we consider the classification problem of functional data including the sleeping energy expenditure (SEE) data, focusing on functional classification. Many existing classification rules are not effective in distinguishing the two classes of SEE data, because the trajectories of each observation have very different patterns for each class. It is often observed that some aspect of data such as the variability of paths is helpful in classification of functional data. To reflect this issue, we introduce a variable measuring the length of path in functional data and then propose a logistic model with fused lasso that considers the behavior of fluctuation of path as well as local correlations within each path. Our proposed model shows a significant improvement over some models used in the existing literature on the classification accuracy rate of functional data such as SEE data. We carry out simulation studies to show the finite sample performance and the gain that it makes in comparison with fused lasso without considering path length. With two more real datasets studied in some existing literature, we demonstrate that the new model achieves better or similar accuracy rate than the best accuracy rates reported in those studies.
RESUMEN
Flexible and soft bioelectronics used on skin tissue have attracted attention for the monitoring of human health. In addition to typical metal-based rigid electronics, soft polymeric materials, particularly conductive hydrogels, have been actively developed to fabricate biocompatible electrical circuits with a mechanical modulus similar to biological tissues. Although such conductive hydrogels can be wearable or implantable in vivo without any tissue damage, there are still challenges to directly writing complex circuits on the skin due to its low tissue adhesion and heterogeneous mechanical properties. Herein, we report cellulose-based conductive hydrogel inks exhibiting strong tissue adhesion and injectability for further on-skin direct printing. The hydrogels consisting of carboxymethyl cellulose, tannic acid, and metal ions (e.g., HAuCl4) were crosslinked via multiple hydrogen bonds between the cellulose backbone and tannic acid and metal-phenol coordinate network. Owing to this reversible non-covalent crosslinking, the hydrogels showed self-healing properties and reversible conductivity under cyclic strain from 0 to 400%, as well as printability on the skin tissue. In particular, the on-skin electronic circuit printed using the hydrogel ink maintained a continuous electrical flow under skin deformation, such as bending and twisting, and at high relative humidity of 90%. These printable and conductive hydrogels are promising for implementing structurally complicated bioelectronics and wearable textiles.
RESUMEN
Transition metal dichalcogenides (TMDs) are of great interest owing to their unique properties. However, TMD materials face two major challenges that limit their practical applications: contact resistance and surface contamination. Herein, a strategy to overcome these problems by inserting a monolayer of hexagonal boron nitride (h-BN) at the chromium (Cr) and tungsten disulfide (WS2 ) interface is introduced. Electrical behaviors of direct metal-semiconductor (MS) and metal-insulator-semiconductor (MIS) contacts with mono- and bilayer h-BN in a four-layer WS2 field-effect transistor (FET) are evaluated under vacuum from 77 to 300 K. The performance of the MIS contacts differs based on the metal work function when using Cr and indium (In). The contact resistance is significantly reduced by approximately ten times with MIS contacts compared with that for MS contacts. An electron mobility up to ≈115 cm2 V-1 s-1 at 300 K is achieved with the insertion of monolayer h-BN, which is approximately ten times higher than that with MS contacts. The mobility and contact resistance enhancement are attributed to Schottky barrier reduction when h-BN is introduced between Cr and WS2 . The dependence of the tunneling mechanisms on the h-BN thickness is investigated by extracting the tunneling barrier parameters.
RESUMEN
This study compared reports of parental life experiences from bereaved parents at two and five years after the death of their adolescent children due to the sinking of the Sewol Ferry in South Korea. Twelve bereaved parents (eight mothers and four fathers from eight families) were interviewed regarding the changes and stabilities they experienced over time at two time points of data collection. Twenty-eight in-depth interviews were transcribed verbatim and analyzed using qualitative content analysis. Outcomes of parental bereavement and changes in life over time may be classified into four main categories: (a) personal changes, (b) changes in perspectives, (c) changes in family relationship, and (d) changes in social relationship and work attitude. This study includes a detailed examination of the phenomenon among the bereaved parents. Discussions and implications are provided based on the results.
Asunto(s)
Aflicción , Acontecimientos que Cambian la Vida , Adolescente , Niño , Femenino , Pesar , Humanos , Padres , República de CoreaRESUMEN
To harness the full potential of halide perovskite based optoelectronics, biological safety, compatibility with flexible/stretchable platforms, and operational stability must be guaranteed. Despite substantial efforts, none has come close to providing a solution that encompasses all of these requirements. To address these issues, we devise a multifunctional encapsulation scheme utilizing hydrogen bond-based self-recovering polymeric nanomaterials as an alternative for conventional glass-based encapsulation. We show that Pb in physically damaged halide perovskite solar cells can be completely contained within the self-recovering encapsulation upon submersion in a simulated rain bath, as indicated by in vitro cytotoxicity tests. In addition, self-recovering encapsulation accommodates stable device operation upon casual bending and even stretching, which is in stark contrast to conventional glass-based encapsulation schemes. We also demonstrate the concept of assembling user-defined scalable modular optoelectronics based on halide perovskite solar cells and light emitting diodes through the use of self-recovering conductive nanocomposites. Finally, long-term operational stability of over 1000 h was achieved under harsh accelerated conditions (50 °C/50% RH and 85 °C/0% RH) with the incorporation of an ultrathin atomic layer deposited TiO2 barrier underneath the multifunctional encapsulation. In light of these merits, the encapsulation scheme based on self-recovering polymeric nanomaterials is proposed as a simple, but practical solution to a multifaceted challenge in the field of halide perovskites.
Asunto(s)
Compuestos de Calcio , Nanoestructuras , Óxidos , TitanioRESUMEN
Manipulation of Ohmic contacts in 2D transition metal dichalcogenides for enhancing the transport properties and enabling its application as a practical device has been a long-sought goal. In this study, n-type tungsten disulfide (WS2 ) single atomic layer to improve the Ohmic contacts of the p-type molybdenum ditelluride (MoTe2 ) material is covered. The Ohmic properties, based on the lowering of Schottky barrier height (SBH) owing to the tunneling barrier effect of the WS2 monolayer, are found to be unexpectedly excellent at room temperature and even at 100 K. The improved SBH and contact resistances are 3 meV and 1 MΩ µm, respectively. The reduction in SBH and contact resistance is confirmed with temperature-dependent transport measurements. This study further demonstrates the selective carrier transport across the MoTe2 and WS2 layers by modulating the applied gate voltage. This WS2 /MoTe2 heterostructure exhibits excellent gate control over the currents of both channels (n-type and p-type). The on/off ratios for both the electron and hole channels are calculated as 107 and 106 , respectively, indicating good carrier type modulation by the electric field of the gate electrode. The Ohmic contact resistance using the tunneling of the atomic layer can be applied to heterojunction combinations of various materials.