Synthesis, Photoluminescence, and Electroluminescence of Phosphorescent Dipyrido[3,2-a;2'3'-c]phenazine-Platinum(II) Complexes Bearing Hole-Transporting Acetylide Ligands.

In this study, novel phosphorescent dipyrido[3,2-a;2'3'-c]phenazine (dppz)-platinum(II)-phenylacetylide complexes were developed to fabricate non-doped organic light-emitting diodes (OLED) by solution-processing. To facilitate the charge carrier injection into the emitting layer (EML), 3,6-di-tert-butylcarbazole-functinalized phenylacetylides were employed. As for the dppz ligand, 9,9-dihexylfluoren-2-yl and 4-hexylthiophen-2-yl side-arms were introduced to the 2,7-positions, which led to reddish orange and red photoluminescence (PL), respectively, in solution and film states (PL wavelength: ca. 600 and ca. 625 nm, respectively). The carbazole-appended phenylacetylide ligands hardly affected the emission color, although unsubstituted phenylacetylides gave rise to aggregate- or excimer-based near-infrared PL with a low quantum yield. Two types of non-doped OLEDs were fabricated: single-layer and multilayer devices. In both devices, the organic layers were fabricated by spin-coating, and the EML consisted of a neat film of the corresponding platinum(II) complex. Therein, electroluminescence spectra corresponding to those of PL were observed. The single-layer devices exhibited low device efficiencies due to a deteriorated charge carrier balance. The multilayer devices possessed hole- and electron-transporting layers on the anode and cathode sides of the EML, respectively. Owing to an improved charge carrier balance, the multilayer devices exhibited higher device performance, affording considerably improved values of luminance and external quantum efficiency.

Crystal structure of (µ-hydrogen di-sulfato)-µ-oxido-bis-[(4,4'-di-tert-butyl-2,2'-bi-pyridine)-oxidovanadium(IV/V)] aceto-nitrile monosolvate.

The dinuclear oxidovanadium(IV/V) complex, [V2(HS2O8)O3(C18H24N2)2]·CH3CN or [V2O2(µ-O)(µ-H(SO4)2)(4,4'-tBubpy)2]·CH3CN (4,4'-tBubpy = 4,4'-di-tert-butyl-2,2'-bi-pyridine), has crystallographic C 2 symmetry and exhibits a distorted octa-hedral geometry around the vanadium center, where the two 4,4'-tBubpy ligands are nearly orthogonal to each other. The two vanadium ions are linked by an oxo anion and a unique protonated sulfate anion [H(SO4)2 3-]. In the crystal, inter-molecular C-H⋯π and π-π inter-actions between the 4,4'-tBubpy ligands are present, leading to a three-dimensional network.

Innovative green oxidation of amines to imines under atmospheric oxygen.

In recent years, the development of environmentally benign molecular construction methods has been of great importance, and especially, resource recycling, high atomic efficiency, and low environmental impact are in high demand. From this point of view, attention has also been focused on the development of one-pot synthesis of pharmaceuticals and functional molecules. Imines are excellent synthetic intermediates of these useful molecules, and the environmentally friendly oxidative synthesis of imines from amines has been energetically developed using oxygen (or air), which is abundantly available on the Earth, as an oxidant. This review focuses on the latest innovative and green oxidation systems of amines to imines under atmospheric oxygen, and their application to one-pot/eco-friendly and sustainable synthesis of pharmaceuticals and functional molecules. In particular, catalytic systems that activate molecular oxygen are categorized and described in detail as transition metal catalytic systems, photoirradiated catalytic systems, and organocatalytic systems.

Potential of a Novel Chemical Compound Targeting Matrix Metalloprotease-13 for Early Osteoarthritis: An In Vitro Study.

Osteoarthritis is a progressive disease characterized by cartilage destruction in the joints. Matrix metalloproteinases (MMPs) and a disintegrin and metalloproteinase with thrombospondin motifs (ADAMTSs) play key roles in osteoarthritis progression. In this study, we screened a chemical compound library to identify new drug candidates that target MMP and ADAMTS using a cytokine-stimulated OUMS-27 chondrosarcoma cells. By screening PCR-based mRNA expression, we selected 2-(8-methoxy-2-methyl-4-oxoquinolin-1(4H)-yl)-N-(3-methoxyphenyl) acetamide as a potential candidate. We found that 2-(8-methoxy-2-methyl-4-oxoquinolin-1(4H)-yl)-N-(3-methoxyphenyl) acetamide attenuated IL-1ß-induced MMP13 mRNA expression in a dose-dependent manner, without causing serious cytotoxicity. Signaling pathway analysis revealed that 2-(8-methoxy-2-methyl-4-oxoquinolin-1(4H)-yl)-N-(3-methoxyphenyl) acetamide attenuated ERK- and p-38-phosphorylation as well as JNK phosphorylation. We then examined the additive effect of 2-(8-methoxy-2-methyl-4-oxoquinolin-1(4H)-yl)-N-(3-methoxyphenyl) acetamide in combination with low-dose betamethasone on IL-1ß-stimulated cells. Combined treatment with 2-(8-methoxy-2-methyl-4-oxoquinolin-1(4H)-yl)-N-(3-methoxyphenyl) acetamide and betamethasone significantly attenuated MMP13 and ADAMTS9 mRNA expression. In conclusion, we identified a potential compound of interest that may help attenuate matrix-degrading enzymes in the early osteoarthritis-affected joints.

Transition-Metal-Free Synthesis of Unsymmetrical Diaryl Tellurides via SH2 Reaction of Aryl Radicals on Tellurium.

Although diaryl tellurides are parent organotellurium compounds, their synthesis methods, especially for unsymmetrical ones, are limited. This may be due to the instability of diaryl tellurides and their synthesis intermediates under reaction conditions. Radical reactions are known to exhibit excellent functional group selectivity; therefore, we focused on a bimolecular homolytic substitution (SH2) reaction between the aryl radical and diaryl ditelluride. Aryl radicals are generated from arylhydrazines in air and captured by diaryl ditellurides, resulting in a selective formation of unsymmetrical diaryl tellurides with high yields. The electronic effects of the substituents on both arylhydrazines and diaryl ditellurides on the SH2 reaction of tellurium are also discussed in detail.

Photoinduced Bisphosphination of Alkynes with Phosphorus Interelement Compounds and Its Application to Double-Bond Isomerization.

The addition of interelement compounds with heteroatom-heteroatom single bonds to carbon-carbon unsaturated bonds under light irradiation is believed to be an atomically efficient method to procure materials with carbon-heteroatom bonds. In this study, we achieved the photoinduced bisphosphination of alkynes using the phosphorus interelement compound, tetraphenyldiphosphine monosulfide (1), to stereoselectively obtain the corresponding (E)-vic-1,2-bisphosphinoalkenes, which are important transition-metal ligands. The bisphosphination reaction was performed by mixing 1 and various alkynes and then exposing the mixture to light irradiation. Optimization of the conditions for the bisphosphination reaction resulted in a wide substrate range and excellent trans-selectivity. Moreover, the completely regioselective introduction of pentavalent and trivalent phosphorus groups to the terminal and internal positions of the alkynes, respectively, was achieved. We also found that the novel double-bond isomerization reaction of the synthesized bisphosphinated products occurred with a catalytic amount of a base under mild conditions. Our method for the photoinduced bisphosphination of carbon-carbon unsaturated compounds may have strong implications for both organic synthesis and organometallic and catalyst chemistry.

A two-phase bromination process using tetraalkylammonium hydroxide for the practical synthesis of α-bromolactones from lactones.

A simple and efficient method for α-brominating lactones that affords α-bromolactones under mild conditions using tetraalkylammonium hydroxide (R4N+OH-) as a base was developed. Lactones are ring-opened with Br2 and a substoichiometric amount of PBr3, leading to good yields of the corresponding α-bromocarboxylic acids. Subsequent intramolecular cyclization over 1 h using a two-phase system (H2O/CHCl3) containing R4N+OH- afforded α-bromo lactones in good yields. This method can be applied at the 10 mmol scale using simple operations. α-Bromo-δ-valerolactone, which is extremely reactive and difficult to isolate, could be isolated and stored in a freezer for about one week using the developed method. Optimizing the solvent for environmentally friendly large-scale syntheses revealed that methyl ethyl ketone (MEK) was as effective. In addition, in situ-generated α-bromo-δ-valerolactone was directly converted into a sulfur-substituted functional lactone without difficulty by reacting it with a sulfur nucleophile in one pot without isolation. This new bromination system is expected to facilitate the industrial use of α-bromolactones as important intermediates.

Excellent Catalytic Performances of a Au/C-CuO Binary System in the Selective Oxidation of Benzylamines to Imines under Atmospheric Oxygen.

A green method of the oxidation of benzylamines to imines was developed using a novel binary system of Au/C-CuO. This system was evaluated under atmospheric oxygen, and the corresponding imines were obtained in up to 100% yields by loading 0.006 mol % of Au/C and 1.25 mol % of CuO under mild conditions. This system was also successfully applied to the syntheses of N-containing functional molecules, as well as that of imines on the scale of several grams. Furthermore, the turnover number of the system (more than 8000 times on a gold basis) as well as its ability to be reused more than 10 times for benzylamine oxidation demonstrates the excellent durability and recyclability of the developed system.

Clarification on the Reactivity of Diaryl Diselenides toward Hexacyclohexyldilead under Light.

In this study, the reactivity of organochalcogen compounds toward a representative alkyl-lead bond compound under light was investigated in detail. Under light irradiation, the Cy-Pb bond of Cy6Pb2 (Cy = cyclohexyl) undergoes homolytic cleavage to generate a cyclohexyl radical (Cy•). This radical can be successfully captured by diphenyl diselenide, which exhibits excellent carbon-radical-capturing ability. In the case of (PhS)2 and (PhTe)2, the yields of the corresponding cyclohexyl sulfides and tellurides were lower than that of (PhSe)2. This probably occurred due to the low carbon-radical-capturing ability of (PhS)2 and the high photosensitivity of the cyclohexyl-tellurium bond.

Oxidative Synthesis of Acid Blue 7 Dye Catalyzed by CuO/Silicotungstic Acid in Water-Phase.

A catalytic oxidation reaction for Acid Blue 7 dye synthesis was evaluated in water. Without lead oxide or manganese oxide derivatives as oxidants, polyoxometalate catalysts were investigated to reduce the usage of harmful heavy metal. A catalyst was prepared by mixing silicotungstic acid with copper oxide, and aqueous hydrogen peroxide (30%) was used as an oxidizing agent. This reaction proceeded to produce Acid Blue 7 from the corresponding leuco acid after 45 min at 95 °C and was viable for a 10 g-scale synthesis.