RESUMEN
The efficacy and applicability of Plasma Activated Ice (PAI) -produced by cold atmospheric plasma (CAP) technology- on microorganisms and quality characteristics of perishable fresh sea bream (Sparus aurata) fillets, were evaluated. The changes in microbiological load and quality characteristics of fish fillets were investigated during storage with ice from deionized water (Control), PAI and ice from artificially produced water (Artificial) of H2O2 concentrations equal to those of PAI. Fresh sea bream fillets were packed under ice flakes (produced from PAI or Artificial or Control) on layers (as typically done in the relevant industry) and stored at 0.5 °C for 27 days. PAI application inhibited significantly the growth of microbial load of the fillets resulting in reduced growth rates while simultaneously significantly retarded the quality deterioration compared to the other disinfectant media. The use of PAI (with 10 mg/L H2O2) led to a 11-day and 6-day extension, i.e., 2-fold and a â¼ 1.5-fold extension, of the fillets shelf-life compared to the samples treated with Control and Artificial ice, respectively. The results proved the efficiency of PAI in extending the shelf-life of perishable foods during storage (or/and transportation), by validating its antimicrobial properties and cooling capacity.
Asunto(s)
Antiinfecciosos , Perciformes , Gases em Plasma , Dorada , Animales , Conservación de Alimentos/métodos , Hielo , Gases em Plasma/farmacología , Peróxido de Hidrógeno , Dorada/microbiología , Antiinfecciosos/farmacologíaRESUMEN
Rapid and sustained condensate droplet departure from a surface is key toward achieving high heat-transfer rates in condensation, a physical process critical to a broad range of industrial and societal applications. Despite the progress in enhancing condensation heat transfer through inducing its dropwise mode with hydrophobic materials, sophisticated surface engineering methods that can lead to further enhancement of heat transfer are still highly desirable. Here, by employing a three-dimensional, multiphase computational approach, we present an effective out-of-plane biphilic surface topography, which reveals an unexplored capillarity-driven departure mechanism of condensate droplets. This texture consists of biphilic diverging microcavities wherein a matrix of small hydrophilic spots is placed at their bottom, that is, among the pyramid-shaped, superhydrophobic microtextures forming the cavities. We show that an optimal combination of the hydrophilic spots and the angles of the pyramidal structures can achieve high deformational stretching of the droplets, eventually realizing an impressive "slingshot-like" droplet ejection process from the texture. Such a droplet departure mechanism has the potential to reduce the droplet ejection volume and thus enhance the overall condensation efficiency, compared to coalescence-initiated droplet jumping from other state-of-the-art surfaces. Simulations have shown that optimal pyramid-shaped biphilic microstructures can provoke droplet self-ejection at low volumes, up to 56% lower than superhydrophobic straight pillars, revealing a promising new surface microtexture design strategy toward enhancing the condensation heat-transfer efficiency and water harvesting capabilities.
RESUMEN
Polymerase chain reaction (PCR) is the most common method used for nucleic acid (DNA) amplification. The development of PCR-performing microfluidic reactors (µPCRs) has been of major importance, due to their crucial role in pathogen detection applications in medical diagnostics. Closed loop (CL) is an advantageous type of µPCR, which uses a circular microchannel, thus allowing the DNA sample to pass consecutively through the different temperature zones, in order to accomplish a PCR cycle. CL µPCR offers the main advantages of the traditional continuous-flow µPCR, eliminating at the same time most of the disadvantages associated with the long serpentine microchannel. In this work, the performance of three different CL µPCRs designed for fabrication on a printed circuit board (PCB) was evaluated by a computational study in terms of the residence time in each thermal zone. A 3D heat transfer model was used to calculate the temperature distribution in the microreactor, and the residence times were extracted by this distribution. The results of the computational study suggest that for the best-performing microreactor design, a PCR of 30 cycles can be achieved in less than 3 min. Subsequently, a PCB chip was fabricated based on the design that performed best in the computational study. PCB constitutes a great substrate as it allows for integrated microheaters inside the chip, permitting at the same time low-cost, reliable, reproducible, and mass-amenable fabrication. The fabricated chip, which, at the time of this writing, is the first CL µPCR chip fabricated on a PCB, was tested by measuring the temperatures on its surface with a thermal camera. These results were then compared with the ones of the computational study, in order to evaluate the reliability of the latter. The comparison of the calculated temperatures with the measured values verifies the accuracy of the developed model of the microreactor. As a result of that, a total power consumption of 1.521 W was experimentally measured, only ~7.3% larger than the one calculated (1.417 W). Full validation of the realized CL µPCR chip will be demonstrated in future work.
RESUMEN
In recent years, printed circuit board (PCB)-based microfluidics have been explored as a means to achieve standardization, seamless integration, and large-scale manufacturing of microfluidics, thus paving the way for widespread commercialization of developed prototypes. In this work, static micro polymerase chain reaction (microPCR) devices comprising resistive microheaters integrated on PCBs are introduced as miniaturized thermocyclers for efficient DNA amplification. Their performance is compared to that of conventional thermocyclers, in terms of amplification efficiency, power consumption and duration. Exhibiting similar efficiency to conventional thermocyclers, PCB-based miniaturized thermocycling achieves faster DNA amplification, with significantly smaller power consumption. Simulations guide the design of such devices and propose means for further improvement of their performance.
RESUMEN
The design and fabrication of a continuous-flow µPCR device with very short amplification time and low power consumption are presented. Commercially available, 4-layer printed circuit board (PCB) substrates are employed, with in-house designed yet industrially manufactured embedded Cu micro-resistive heaters lying at very close distance from the microfluidic network, where DNA amplification takes place. The 1.9-m-long microchannel in combination with desirably high flow velocities (for fast amplification) challenged the robustness of the sealing that was overcome with the development of a novel bonding method rendering the microdevice robust even at extreme pressure drops (12 bars). The proposed fabrication methods are PCB compatible, allowing for mass and reliable production of the µPCR device in the established PCB industry. The µPCR chip was successfully validated during the amplification of two different DNA fragments (and with different target DNA copies) corresponding to the exon 20 of the BRCA1 gene, and to the plasmid pBR322, a commonly used cloning vector in E. coli. Successful DNA amplification was demonstrated at total reaction times down to 2 min, with a power consumption of 2.7 W, rendering the presented µPCR one of the fastest and lowest power-consuming devices, suitable for implementation in low-resource settings. Detailed numerical calculations of the DNA residence time distributions, within an acceptable temperature range for denaturation, annealing, and extension, performed for the first time in the literature, provide useful information regarding the actual on-chip PCR protocol and justify the maximum volumetric flow rate for successful DNA amplification. The calculations indicate that the shortest amplification time is achieved when the device is operated at its enzyme kinetic limit (i.e., extension rate). Graphical abstract.
Asunto(s)
ADN/química , Dispositivos Laboratorio en un Chip , Materiales Manufacturados , Bifenilos Policlorados/química , Reacción en Cadena de la Polimerasa/métodosRESUMEN
The interaction of plasma with polymeric substrates generates both roughness and charging on the surface of the substrates. This work, toward the comprehension and, finally, the control of plasma-induced surface roughness, delves into the intertwined effects of surface charging, ion reflection, and secondary electron-electron emission (SEEE) on roughness evolution during plasma etching of polymeric substrates. For this purpose, a modeling framework consisting of a surface charging module, a surface etching model, and a profile evolution module is utilized. The case study is etching of a poly(methyl methacrylate) (PMMA) substrate by argon plasma. Starting from an initial surface profile with microscale roughness, the results show that the surface charging contributes to a faster elimination of the roughness compared to the case without charging, especially when ion reflection is taken into account. Ion reflection sustains roughness; without ion reflection, roughness is eliminated. Either with or without ion reflection, the effect of SEEE on the evolution of the rms roughness over etching time is marginal. The mutual interaction of the roughness and the charging potential is revealed through the correlation of the charging potential with a parameter combining rms roughness and skewness of the surface profile. A practical implication of the current study is that the elimination or the reduction of surface charging will result in greater surface roughness of polymeric, and generally dielectric, substrates.
RESUMEN
We present a polymeric microfluidic chip capable of purifying DNA through solid phase extraction. It is designed to be used as a module of an integrated Lab-on-chip platform for pathogen detection, but it can also be used as a stand-alone device. The microfluidic channels are oxygen plasma micro-nanotextured, i.e. randomly roughened in the micro-nano scale, a process creating high surface area as well as high density of carboxyl groups (COOH). The COOH groups together with a buffer that contains polyethylene glycol (PEG), NaCl and ethanol are able to bind DNA on the microchannel surface. The chip design incorporates a mixer so that sample and buffer can be efficiently mixed on chip under continuous flow. DNA is subsequently eluted in water. The chip is able to isolate DNA with high recovery efficiency (96± 11%) in an extremely large dynamic range of prepurified Salmonella DNA as well as from Salmonella cell lysates that correspond to a range of 5 to 1.9 × 108 cells (0.263 fg to 2 × 500 ng). The chip was evaluated via absorbance measurements, polymerase chain reaction (PCR), and gel electrophoresis.
Asunto(s)
ADN/aislamiento & purificación , Dispositivos Laboratorio en un Chip , Nanotecnología , Gases em Plasma , Polietilenglicoles/química , Electroforesis en Gel de Poliacrilamida , Microscopía Fluorescente , Reacción en Cadena de la Polimerasa , Espectrofotometría UltravioletaRESUMEN
A method that computes minimum energy paths (MEPs) of wetting transitions is developed. The method couples the Cahn-Hilliard formulation of a modified phase-field method with the simplified string method. Its main computational kernel is the fast Fourier transform that is efficiently performed on graphics processing units. The effectiveness of the proposed method is demonstrated on two types of transitions of droplets on grooved surfaces. The first is the transition from the Cassie-Baxter wetting state to the Wenzel state, where it is shown that it progresses in a sequential manner with the droplet wetting each groove successively. The second transition type is a lateral displacement of the droplet against the grooves, where the droplet successively detaches/attaches from/to the rear/front protrusion of the surface (a transition in the reverse order is also possible). The energy barriers of both the transitions are extracted from the MEP; they are useful for the evaluation of the robustness of superhydrophobic surfaces (resistance to the Cassie-Baxter to Wenzel transition) and the droplet mobility on those surfaces (high mobility/small resistance to lateral displacements). The relation of the MEP with the potential transition paths coming from the solution space mapping is discussed.
RESUMEN
A multiscale modeling framework is used to couple the co-existing scales, i.e., macro-, micro- and nano-scale, in chemical vapor deposition (CVD) processes. The framework consists of a reactor scale model (RSM) for the description of the transport phenomena in the bulk phase (macro-scale) of a CVD reactor and two models for the micro- and nano-scale: (a) A feature scale model (FSM) describing the deposition of a film inside features on a predefined micro-topography on the wafer and (b) a nano-morphology model (NMM) describing the surface morphology evolution during thin film deposition on an initially flat surface. The FSM is deterministic and consists of three sub-models: A ballistic model for the species' transport inside features, a surface chemistry model, and a profile evolution algorithm based on the level set method. The NMM is stochastic and is based on the kinetic Monte Carlo method. The coupling of RSM with FSM is performed through a correction of the species consumption on the wafer. The linking of RSM with NMM is performed through "feeding" of the deposition rate calculated by RSM to the NMM. The case study is CVD of Silicon (Si) from Silane. The effect of the reactor's operating parameters on the Si film conformality inside trenches is investigated by the coupling of RSM with FSM. The formation of dimmers on an initially flat Si (001) surface as well as the periodic change of the surface nano-morphology is predicted.