Production and performance evaluation of chitosan/collagen/honey nanofibrous membranes for wound dressing applications.

Persistent bacterial infections are the leading risk factor that complicates the healing of chronic wounds. In this work, we formulate mixtures of polyvinyl alcohol (P), chitosan (CH), collagen (C), and honey (H) to produce nanofibrous membranes with healing properties. The honey effect at concentrations of 0 % (PCH and PCHC), 5 % (PCHC-5H), 10 % (PCHC-10H), and 15 % (PCHC-15H) on the physicochemical, antibacterial, and biological properties of the developed nanofibers was investigated. Morphological analysis by SEM demonstrated that PCH and PCHC nanofibers had a uniform and homogeneous distribution on their surfaces. However, the increase in honey content increased the fiber diameter (118.11-420.10) and drastically reduced the porosity of the membranes (15.79-92.62 nm). The addition of honey reduces the water vapor transmission rate (WVTR) and the adsorption properties of the membranes. Mechanical tests revealed that nanofibers were more flexible and elastic when honey was added, specifically the PCHC-15H nanofibers with the lowest modulus of elasticity (15 MPa) and the highest elongation at break (220 %). Also, honey significantly improved the antibacterial efficiency of the nanofibers, mainly PCHC-15H nanofibers, which presented the best bacterial reduction rates against Staphylococcus aureus (59.84 %), Pseudomonas aeruginosa (47.27 %), Escherichia coli (65.07 %), and Listeria monocytogenes (49.58 %). In vitro tests with cell cultures suggest that nanofibers were not cytotoxic and exhibited excellent biocompatibility with human fibroblasts (HFb) and keratinocytes (HaCaT), since all treatments showed higher or similar cell viability as opposed to the cell control. Based on the findings, PVA-chitosan-collagen-honey nanofibrous membranes have promise as an antibacterial dressing substitute.

Measurement of the degree of deacetylation in chitosan films by FTIR, 1H NMR and UV spectrophotometry.

The chitosan films were prepared from shrimp, squid, and crab to corroborate that regardless of the source of the chitosan, it was possible to measure the degree of deacetylation. In this work, the degree of deacetylation of chitosan was evaluated via UV, FTIR and 1H NMR spectrophotometry methodologies. Values in a range of 74 to 99% degree of deacetylation (DD) were obtained and varied depending on the method used and the source of chitosan. The spectrophotometric method is one of the most commonly used for this determination; however, it has the limitation that D-glucosamine and N-acetylglucosamine share similar wavelengths. All three methods were simple and provided rapid analysis; however, NMR, in particular, was expensive due to its equipment specifications. For this reason, its important to select the simplest method than can be routinely used.•The simplest used technique to determine the degree of deacetylation is infrared spectroscopy.•The degree of acetylation of chitosan is related to its physicochemical properties; its determination is an important parameter due to its association with chitosan applications in different industrial areas.•The 1H NMR method is very precise and requires expensive equipment and trained personal. Thus, it cannot be used routinely to determine the degree of deacetylation.

Therapeutic effects of electrospun chitosan nanofibers on animal skin wounds: A systematic review and meta-analysis.

Electrospun chitosan nanofibers (QSNFs) enhance the healing process by mimicking skin structure and function. The aim of this study was to analyze the therapeutic effects of QSNFs application on animal skin wounds to identify a potential direction for translational research in dermatology. The PRISMA methodology and the PICO scheme were used. A random effects model and mean difference analysis were applied for the meta-analysis. A meta-regression model was constructed, risk of bias was determined, and methodological quality assessment was performed. Of the 2370 articles collected, 54 studies were selected based on the inclusion and exclusion criteria. The wound healing area was used for building models on the 3rd, 7th, and 14th days of follow-up; the results were - 10.4% (95% CI, -18.2% to -2.6%, p = 0.001), -21.0% (95% CI, -27.3% to -14.7%, p = 0.001), and - 14.0% (95% CI, -19.1 to -8.8%, p = 0.001), respectively. Antioxidants and synthetic polymers combined with QSNFs further reduced skin wound areas (p < 0.05). The results show a more efficient reduction in wound area percentages in experimental groups than in control groups, so QSNFs could potentially be applied in translational human medicine research.

Efficacy of chitosan in the treatment of chronic skin lesions in a horse: A case report.

Consultation was requested for a 7-year-old Gypsy Vanner male horse with a 2-year history of foreskin injury. Upon revision, an ulcer, 153 cm2 in size, with yellowish granules was observed; a RESVECH 2.0 evaluation revealed a score of 32/35 points. Medical history confirmed multiple failed deworming, anti-inflammatory, and antibiotic treatments with different topical therapies and recurrence in summer. Laboratory results confirmed elevated total proteins (8.8 g/dL) and globulins (5.5 g/dL), negative bacterial and fungal cultures, as well as negative coproparasitoscopic findings, and finally, identification of stable fly larvae (Stomoxys calcitrans) in the feces. Microscopy showed disorganized collagen, thickened tissue, polymorphonuclear cells, and acanthosis without neoplastic tissue or parasite remains. Debridement was performed and systemic treatment with ivermectin, penicillin, and non-steroidal anti-inflammatory drugs (NSAIDs) continued. In addition, 2% chitosan gel and films were applied to the entire surface of the lesion for 72 hours on 30 occasions; vector control with nets and insecticides was performed. On day 94, there was a 6 cm2 surface with involvement of the dermal and epidermal layers, moist epithelial tissue, and diffuse edges, with a RESVECH 2.0 evaluation of 6/35 points. Microscopy showed an intact basement membrane, presence of hair follicles, sweat glands, aligned collagen, and angiogenesis. It was concluded that chronic skin lesions in horses represent a diagnostic challenge, and topical chitosan is an adequate treatment due to its biocompatibility and efficacy, in addition to the functional and cosmetic results in dermal regeneration.

Therapeutic effects of chitosan in veterinary dermatology: A systematic review of the literature.

Chitosan is a natural polysaccharide with biocompatibility, biodegradability, nontoxicity, antimicrobial, and hemostatic properties. This biopolymer has been used in different pharmaceutical forms; therefore, it has an attractive potential for dermal applications in veterinary medicine. The aim of this review is to assess the healing potential of chitosan, based on its dermatological effects on animals, to enrich the therapeutic options of veterinary clinicians. A systematic review was conducted based on the Preferred Reporting Items for Systematic reviews and Meta-Analyses (PRISMA) strategy, retrieving 1,032 studies and selecting 39 after the inclusion and exclusion criteria were applied. The studies included reports with confirmed positive effects (n = 46/99, 46.5 %) (P < 0.05), with positive effects (n = 49.5/99, 49.5 %), and with no effect (n = 4/99, 4 %); none of the studies reported adverse effects. There is an association between frequency of application and a decrease in healing time (P = 0.038); applying chitosan "every 48-72 hours" was the most recommended frequency (n = 10/19, 52.9 %). Chitosan, when applied to skin lesions on animals, produces positive effects on healing, potentially becoming a safe biomaterial for skin treatments in veterinary practice. As an initial protocol, we suggest applying chitosan every 48-72 hours for at least 2 weeks (7 applications).

Quinoa (Chenopodium quinoa Willd.): Exploring a Superfood from Andean Indigenous Cultures with Potential to Reduce Cardiovascular Disease (CVD) Risk Markers.

BACKGROUND: The pseudo-cereal quinoa has attracted worldwide attention in recent years, due to it being considered a functional food. This stress-tolerant crop has historically been used by Andean cultures as a staple food. Nowadays, the consumption of quinoa in high-income countries is increasing due to it being associated with numerous health benefits, namely related to cardiovascular health. OBJECTIVE: We have carried out an extensive review on quinoa, including its main uses, applications, and components (nutrients, antinutrients, and bioactives) and their relationship with biological activities and cardiovascular health. Key findings and Conclusions: Quinoa possesses numerous activities, including protection against cardiovascular, metabolic, and degenerative diseases, improvement of the immune system, reduction of symptoms associated with post-menopause, and promotion of muscle mass increase. Some of the quinoa's activities are due to its balanced amino acid profile, high fiber content, presence of phosphorus, iron, potassium, magnesium, vitamin E, and B vitamins. A plethora of bioactives can also be found in quinoa, such as phytosterols, saponins, phenolics, bioactive peptides, and phytoecdysteroids. More research is needed to better understand the mechanisms of action involved in the biological/therapeutic action of some quinoa components, namely those related to the potential to reduce cardiovascular disease (CVD) risk markers. The knowledge of factors that affect quinoa variability, such as processing conditions, is also of great importance for being able to obtain more benefits from this crop.

Electrospun and co-electrospun biopolymer nanofibers for skin wounds on diabetic patients: an overview.

Wound healing treatment in diabetic patients worldwide represents around 2.1 trillion dollars to global health sectors. This is because of the complications presented in the wound healing process of skin ulcers, such as a lack of macrophage and fibroblast growth factors (TGF-ß1 and PDGF, respectively) that are both needed for extracellular matrix (ECM) synthesis. Therefore, there is a need for research on new and cost-effective materials to enable ECM synthesis. Such materials include co-electrospun nanofibers used as wound dressings, since they have a similar morphology to the ECM, and therefore, possess the advantage of using different materials to accelerate the wound healing process. Co-electrospun nanofibers have a unique structural configuration, formed by a core and a shell. This configuration allows the protection and gradual liberation of healing agent compounds, which could be included in the core. Some of the materials used in nanofibers are polymers, including natural compounds, such as chitosan (which has been proven to possess antimicrobial and therapeutic activity) and gelatin (for its cell growth, adhesion, and organisational capacity in the wound healing process). Synthetics such as polyvinyl-alcohol (PVA) (mainly as a co-spinning agent to chitosan) can also be used. Another bioactive compound that can be used to enhance the wound healing process is eugenol, a terpenoid present in different medicinal plant tissues that have scarring properties. Therefore, the present review analyses the potential use of co-electrospun nanofibers, with chitosan-PVA-eugenol in the core and gelatin in the shell as a wound dressing for diabetic skin ulcers.

Evaluation of the status quo of polyphenols analysis: Part II-Analysis methods and food processing effects.

Nowadays due to the concern with the environmental impact of analytical techniques and in order to reduce the ecological footprint there is a tendency to use more efficient and faster procedures that use a smaller amount of organic solvents. Polyphenols have been widely studied in plant-based matrices due to their wide and potent biological properties; however there are no standardized procedures both for sample preparation and analysis of these compounds. The second of a two-part review will carry out a critical review of the extraction procedures and analytical methods applied to polyphenols and their selection criteria over a wide range of factors in relation to commerce-associated, environmental, and economic factors. It is foreseen that in the future the analysis of polyphenols in plant-based matrices includes the use of techniques that allow the simultaneous determination of different subclasses of polyphenols using fast, sophisticated, and automated techniques that allow the minimal consumption of solvents.

Removal of copper improves the lipid content in Nannochloropsis oculata culture.

Mining is an important activity for the economic development of many countries. However, this activity produces toxic residues that pollute water and the environment. The heavy metal removal from effluents of acid mine water is crucial to avoid environmental pollution. The microalga Nannochloropsis oculata was cultured in algal medium, with the addition of 1.16, 1.74, 2.32, 3.48, and 4.64 mg Cu2+ L-1 coming from acid mine water to assess its removal capacity and the effect of copper content on the cell density and lipid productivity. The results showed that N. oculata removed up to 94.88 ± 0.43% at copper concentration than 1.74 mg Cu2+ L-1; additionally, a positive effect on the lipid content was found at copper concentration to be higher, 4.64 mg Cu2+ L-1, yielding 77.04 ± 2.60% of lipid content, twice as high as that achieved in the control culture of 33.058 ± 5.398%, thus potentiating the biodiesel production. These findings are favorable because they indicate that microalgae can remove copper added in the culture and present in acid mine water and can yield high lipid content at the same time. The cell density and growth rate decreased with increased concentrations of copper in the culture medium.

Physicochemical, Rheological, and Morphological Characteristics of Products from Traditional and Extrusion Nixtamalization Processes and Their Relation to Starch.

The aim of this study was to compare the physicochemical, rheological, and morphological characteristics of corn, nixtamalized flour, masa, and tortillas from the traditional nixtamalization process (TNP) and the extrusion nixtamalization process (ENP) and their relationship with starch. The traditional and extrusion processes were carried out using the same variety of corn. From both processes, samples of ground corn, nixtamalized flour, masa, and tortillas were obtained. The extrusion process produced corn flour with particle sizes smaller (particle size index, PSI = 51) than that of flour produced by the traditional nixtamalization process (PSI = 44). Masa from the TNP showed higher modulus of elasticity (G') and viscosity (G ″) values than that off masa from the ENP. Furthermore, in a temperature sweep test, masa from the TNP showed a peak in G' and G ″, while the masa from the ENP did not display these peaks. The ENP-produced tortillas had higher resistant starch contents and comparable firmness and rollability to those from the TNP but lower quality parameter values. A comparison of the products' physicochemical properties obtained by the two processes shows the importance of controlling the damage to starch during the milling and extrusion processes to obtain tortillas of better quality. For the first time, we propose the measurement of the viscoelastic parameters G' and G ″ in temperature sweep mode to monitor changes in the degree of starch damage.

Effect of Extrusion Processing Conditions on the Phenolic Compound Content and Antioxidant Capacity of Sorghum (Sorghum bicolor (L.) Moench) Bran.

Sorghum is a cereal with little use in human diet; however, this grain can provide several nutrients and, additionally, has a high content of phenolic compounds concentrated in bran, which could be beneficial to human health due to its high antioxidant capacity. However, these bioactive compounds are bound within the cell wall matrix; it is necessary to release these compounds to take advantage of their antioxidant properties. The extrusion process increases the accessibility of bound phenolic compounds, breaking their bonds from the bran matrix. The aim of this study was to determine the optimal extrusion conditions for maximizing the phenolic compound content and antioxidant capacity of sorghum bran extrudate. The extrusion process factors evaluated were feed moisture (FM) from 25 to 35% and the fourth extrusion zone temperature (T) in the range of 140-180 °C. Analysis of variance and response surface analysis were used in the evaluation. The prediction coefficient, (FM)2, (T)2 and their interaction (FM)(T) significantly affected the free total phenolic compounds. The antioxidant capacity of the free total phenolic compounds was significantly affected by (FM)2 and (T)2. The optimal extrusion conditions were FM = 30% and T = 160 °C, which provided free total phenolic compounds with a value of 7428.95 µg GAE/g (predicted value: 7810.90 µg GAE/g) and antioxidant capacity with a value of 14.12 µmol TE/g (predicted value: 14.85 µmol TE/g). Results confirmed that extrusion process optimization was useful to increase the content of phenolic compounds and improved the antioxidant capacity of sorghum bran.

Prevalence and characterization of Listeria monocytogenes isolated from pork meat and on inert surfaces.

This study focuses on the prevalence of Listeria monocytogenes (Lm) in pork meat and on inert surfaces from slaughterhouses in Sonora, Mexico. A total of 21 Lm were obtained from 103 samples, giving a prevalence of 20.3%. The prevalence of Lm in pork loin was 15.9% and 20.8% for inert surfaces in Federal Inspection Type (FIT) slaughterhouses. For non-FIT slaughterhouses, the prevalence was 25.7%. PCR amplification of genomic DNA from the Lm isolates revealed the presence of the hlyA gene, suggesting a pathogenic nature for these isolates. The isolates obtained in this work all clustered with Lm, according to our phylogenetic analysis based on the 16S rDNA sequence. This Lm cluster indicates that Lm isolates 7-2, 4, 2-1, 10B, 8, 3, 3-3, and 9 share 16S rRNA identity with other Lm isolates that have been reported as foodborne pathogens (rR2-502, J1817, J1816, J1926) and that are involved in foodborne outbreaks. The most commonly detected serotypes were 1/2a and 1/2b. All isolates displayed differential responses to the assayed antibiotics, and most isolates were able to grow in the presence of penicillin G, or both penicillin and penicillin-derived (oxacillin) antibiotics.

Characterization data of chitosan-based films: Antimicrobial activity, thermal analysis, elementary composition, tensile strength and degree crystallinity.

This set of raw and analyzed data are complement to the research article that is titled "Mechanical, structural and physical aspects of chitosan-based films as antimicrobial dressings" (Escárcega-Galaz et al., 2018) [1]. The mechanical, structural and biological properties of the chitosan-based films determine their potential application in biomedicine. The films were prepared from pure chitosan and in combination with honey or glycerol. Afterwards, the characterization data related to thermal analysis, elementary composition, tensile strength and degree crystallinity was collected. The data of the antimicrobial activity of the films correspond to Klebsiella pneumoniae and Pseudomonas aeruginosa, both isolated from cutaneous ulcers. This set of data indicate that the chitosan-based films possess biological and physicochemical characteristics for their application as antimicrobial dressings for their action when are used by direct contact during the treatment of cutaneous ulcers.

Mechanical, structural and physical aspects of chitosan-based films as antimicrobial dressings.

Chitosan is a biodegradable, non-toxic, and antimicrobial polymer. Chitosan films can be used as a dressing because they promote the healing of cutaneous ulcers. In this study, the mechanical, physical, and microbiological properties films of pure chitosan and films formulated with a glycerol-honey mixture were characterized. The films were smooth, homogenous, transparent, and porous, with no fractures or cracks. Additionally, it was found that all were resistant to breaking, that the tearing force was directly related to the chitosan concentration, and that the addition of honey and glycerol improved the elongation percentage. When evaluating the antimicrobial activity of the films against Pseudomonas aeruginosa and Klebsiella pneumoniae, the films were found to have an effect only by direct contact. In the films formulated with honey, the area of contact increased to 44%. The excellent color, structural, antimicrobial, and surface morphological properties of the newly developed films make them a promising alternative for use as a dressing for the healing of skin ulcers.

Chitosan treatment for skin ulcers associated with diabetes.

Infections, ulcerations, gangrene and, in severe cases, extremity amputation, are common complications among diabetic subjects. Various biomaterials have been utilized for the treatment of these lesions. Chitosan is an amino sugar with a low risk of toxicity and immune response. In this study, we evaluated chitosan topical gel and film treatments for subjects with diabetic ulcerations and wounds associated with diabetes mellitus. In a pre-experimental design, we described the result of chitosan gel and film treatment for wounds and skin ulcers among patients with long-standing diabetes mellitus. We studied 8 diabetic patients with wounds and skin ulcers (long duration and Wagner degree 1-2). Initially, most lesions had some degree of infection, tissue damage and ulceration. At the end of the treatment (topical chitosan) period, the infections were cured. All patients experienced a significant improvement in the initial injury and developed granulation tissue and a healthy skin cover. This report represents one of the few published clinical experience regarding the chitosan for the treatment of skin lesions among diabetic subjects. These results are relevant and promising for the treatment of this disease.

New Isoflavonoids from the extract of Rhynchosia precatoria (Humb. & Bonpl. ex Willd.) DC. and their antimycobacterial activity.

ETHNOPHARMACOLOGY RELEVANCE: The evaluation of the antimycobacterial activity of extracts of medicinal plants used by Mayos against tuberculosis and respiratory problems, allowed the identification of Rhynchosia precatoria (Humb. & Bonpl. ex Willd.) DC (Fabaceae) as the best candidate to find new antimycobacterial compounds. AIM OF THE STUDY: To isolate and characterize the compounds of R. precatoria responsible for the inhibitory and bactericidal activity against Mycobacterium tuberculosis H37Rv and Mycobacterium smegmatis ATCC 700084. To determine antimycobacterial synergistic effect of pure compounds and their selectivity index towards Vero cells. MATERIALS AND METHODS: A total of six flavonoids were purified by silica gel column chromatography. Structural elucidation of the isolated compounds was achieved by using 1D and 2D NMR spectroscopy techniques. The configuration at the C-3 chiral center was established by quantum mechanical calculation of the electronic circular dichroism (ECD) spectrum. In vitro inhibitory and bactericidal activity against M. tuberculosis and M. smegmatis were determined with the redox indicator Alamar Blue (resazurin). Synergy was determined by X/Y quotient. Cytotoxicity was measured by MTT assay. RESULTS: The isolated compounds were identified as precatorin A (1), precatorin B (2), precatorin C (3), lupinifolin (4), cajanone (5) and lupinifolinol (6). Compounds 1-3 are new. Compounds 1 to 5 inhibited the growth of M. tuberculosis (MIC ≥31.25µg/mL); compounds 1, 2, 4 and 5 killed the bacteria (MBC ≥31.25µg/mL) and also inhibited M. smegmatis (MIC ≥125µg/mL), while 1 and 4 also resulted bactericidal (MBC ≥125µg/mL). Compounds 4 and 5 presented synergistic effect (X/Y quotient value <0.5) at a concentration of 1/2 MIC of each compound in the combination. Cytotoxicity in murine macrophages (RAW 264.7 cells) gave IC50 values of 13.3-46.98µM, for compounds 1-5. CONCLUSIONS: In this work we isolated two new isoflavanones (1 and 2), and one new isoflavone (3) with a weak antimycobacterial activity. The (3R) absolute configuration was assigned to 1 by computational analysis of its ECD spectrum and to 2 and 5 by similarity of their ECD spectra with that of 1. We are also reporting by first time, activity against virulent strain of M. tuberculosis for compounds 4 and 5 and their antimycobacterial synergistic effect.

Hypotensive effects of genistein: From chemistry to medicine.

Genistein (4', 5, 7-trihydroxyisoflavone), a naturally occurring flavonoid characteristic of Leguminoseae plants, is a phyto-oestrogen exerting oestrogenic activity as both an agonist and an antagonist substance. A large body of evidence suggests that genistein possesses many physiological and pharmacological properties that make this molecule a potential agent for the prevention and treatment of a number of chronic diseases. Growing evidence suggests that genistein could act as a vasodilating, anti-thrombotic, and anti-atherosclerotic agent, exerting these effects through different mechanisms of action. This paper aims to review data from the literature assessing the beneficial effects of genistein on hypertension, one of the most important cardiovascular disease risk factors along with hyperglycemia and hyperlidipemia. In addition, we discuss the chemistry, main sources and bioavailability of genistein. Scientific findings support genistein's potential as a promising anti-hypertensive agent in different experimental models. However, clinical trials are very limited and more research will be required before genistein intake can be recommended as part of therapies targeting raised blood pressure.

Novel edible oil sources: Microwave heating and chemical properties.

The aim of this work was to investigate the effect of various microwave heating times (1, 3, 5, 10, and 15min) on the chemical properties of novel edible oil sources, including Mashhadi melon (Cucumis melo var. Iranians cv. Mashhadi), Iranian watermelon (Citrullus lanatus cv. Fire Fon), pumpkin (Cucurbita pepo subsp. pepo var. Styriaca), and yellow apple (Malus domestica cv. Golden Delicious) seed oils. The evaluated parameters were peroxide value (PV), conjugated diene (CD) and triene (CT) values, carbonyl value (CV), p-anisidine value (AnV), oil stability index (OSI), radical scavenging activity (RSA), total tocopherols, total phenolics, as well as chlorophyll and carotenoid contents. Results showed that extended microwave heating involves decreased quality of the seed oils, mainly due to the formation of primary and secondary oxidation products. Microwave heating time also affects the total contents of chlorophylls, carotenoids, phenolics and tocopherols, which clearly decrease by increasing the exposure time. The order of oxidative stability of the analyzed edible oils was pumpkin>Mashhadi melon>Iranian watermelon>yellow apple. The obtained results demonstrated the promising potential of these novel edible oils for different food applications.

Antioxidant and chelating capacity of Maillard reaction products in amino acid-sugar model systems: applications for food processing.

BACKGROUND: Maillard reaction products (MRP) have gained increasing interest owing to their both positive and negative effects on human health. Aqueous amino acid-sugar model systems were studied in order to evaluate the antioxidant and chelating activity of MRP under conditions similar to those of food processing. Amino acids (cysteine, glycine, isoleucine and lysine) combined with different sugars (fructose or glucose) were heated to 100 and 130 °C for 30, 60 and 90 min. Antioxidant capacity was evaluated via ABTS and DPPH free radical scavenging assays, in addition to Fe2+ and Cu2+ ion chelating capacity. RESULTS: In the ABTS assay, the cysteine-fructose model system presented the highest antioxidant activity at 7.05 µmol mL-1 (130 °C, 60 min), expressed in Trolox equivalents. In the DPPH assay, the cysteine-glucose system presented the highest antioxidant activity at 3.79 µmol mL-1 (100 °C, 90 min). The maximum rate of chelation of Fe2+ and Cu2+ was 96.31 and 59.44% respectively in the lysine-fructose and cysteine-glucose systems (100 °C, 30 min). CONCLUSION: The model systems presented antioxidant and chelating activity under the analyzed temperatures and heating times, which are similar to the processing conditions of some foods. © 2017 Society of Chemical Industry.

An HPLC Procedure for the Quantification of Aloin in Latex and Gel from Aloe barbadensis Leaves.

Aloin is an anthraquinone-C-glycoside present in Aloe vera. This compound is extremely variable among different species and highly depends on the growing conditions of the plants. The quantification of aloin in different extraction preparations has been a frequent problem due to the high instability of the compound. The aim of the present study is to develop and validated an analytical method for aloin detection in fresh and dry samples of Aloe barbadensis gel and latex using high performance liquid chromatography coupled to a diode array detector (HPLC-DAD). Phosphate buffered saline (pH 3) was selected as the extraction solvent. The aloin was separated using a Zorbax Eclipse AAA column (4.6 × 150 mm) at 35°C, and water and acetonitrile were used as the mobile phase at a flow rate of 0.9 mL/min. The linearity was satisfactory with a correlation coefficient greater than 0.999. Under these conditions, the method precision (relative standard deviation) was 3.71% for FL, 4.41% for dry latex, 0.81% for fresh gel and 4.42% for dry gel samples. Aloe latex was determined to have a greater amount of aloin than aloe gel. The method validation was satisfactory and exhibited adequate linearity, repeatability and accuracy.