Treatment of biowaste commingled with biodegradable bioplastic films using Black Soldier Fly larvae: Generation and fate of micro-plastics.

The use of Black Soldier Fly (BSF) larvae is emerging as a promising alternative for biowaste (i.e. food waste) treatment, generating larval biomass and process residues, suitable for use as animal feed and fertilizer, respectively. In line with an increasing use of starch-based bioplastics in food packaging, the presence of these biopolymers and associated biodegradable microplastics (BMPs) in food waste is expected to rise. Knowledge of the generation of BMPs and their fate in the BSF treatment process is scarce, or indeed, completely lacking in the case of small-sized BMPs (<50 µm). The present study aims to investigate the generation and potential accumulation of BMPs in BSF larvae process. Food waste mixed with starch-based bioplastic films was fed to larvae and BMPs of two particle sizes (inferior to and exceeding 10 µm in diameter) were monitored over time in rearing substrate and larval biomass. BMPs concentrations in substrate were compared with larvae-free control tests. The presence of larvae favoured the generation of BMPs. Concentrations of smaller-sized BMPs (<10 µm) increased by approximately 172% in the final substrate, and accumulated in the larval biomass with a peak exceeding the initial larval concentration by over 1000% just before prepupation, which is the typical stage they are collected when used as animal feed. These results indicate a potential risk of soil contamination by BMPs when final substrate is used as fertilizer and a risk of biomagnification phenomena when larvae are used as animal feed.

Selective Labeling of Small Microplastics with SERS-Tags Based on Gold Nanostars: Method Optimization Using Polystyrene Beads and Application in Environmental Samples.

Microplastics pollution is being unanimously recognized as a global concern in all environments. Routine analysis protocols foresee that samples, which are supposed to contain up to hundreds of microplastics, are eventually collected on nanoporous filters and inspected by microspectroscopy techniques like micro-FTIR or micro-Raman. All particles, whether made of plastic or not, must be inspected one by one to detect and count microplastics. This makes it extremely time-consuming, especially when Raman is adopted, and indeed mandatory for the small microplastic fraction. Inspired by the principles of cell labeling, the present study represents the first report in which gold nanostars (AuNS) are functionalized to act as SERS-tags and used to selectively couple to microplastics. The intrinsic bright signals provided by the SERS-tags are used to run a quick scan over a wide filter area with roughly 2 orders of magnitude shorter analysis time in respect of state of the art in micro- and nanoplastics detection by µ-Raman. The applicability of the present protocol has been validated at the proof-of-concept level on both fabricated and real offshore marine samples. It is indeed worth mentioning that a SERS-based approach is herein successfully applied on filters and protocols routinely adopted in environmental microplastics monitoring, paving the way for future implementations and applications.

Hydroxy-carboxylic acids as green and abundant ligands for sustainable recovery of copper from a multimetallic powder: a proof of concept.

The recovery of copper and other valuable metals had become increasingly strategic for the future of the global economy's, particularly in regions lacking abundant mineral resources, such as most European countries. In this study, we investigated the viability of utilizing environmentally friendly, cost-effective, abundant and bio-based ligands, specifically carboxylic acids and their derivatives, for copper leaching in a low-temperature hydrometallurgical process. Our investigation focused on elucidating the impact of substituents in the α position of hydroxy-carboxylic acids on copper solubilization efficacy. Notably, hydroxy-carboxylic acids, like malic acid and lactic acid, were evidenced as particularly promising ligands for leaching copper from a custom-made multimetallic powder. By thoroughly characterizing the obtained complexes (Raman, UV-Vis) and by supporting the experimental efforts by a Design of Experiment (DoE) approach, we optimized the leaching process. The influence of experimental parameters such as pH, temperature, leaching time, and Cu/ligand molar ratio on process yield (determined through Inductively Coupled Plasma - Optical Emission Spectroscopy, ICP-OES, analysis) was thoroughly investigated. Additionally, we developed a subsequent copper recovery step by precipitating copper (II) hydroxide in an alkaline environment, guided by speciation diagrams tailored for each copper-ligand system.

The integration of omics and cultivation-dependent methods could effectively determine the biological risks associated with the utilization of soil conditioners in agriculture.

In the circular economy, reusing agricultural residues, treated biowaste, and sewage sludges-commonly referred to as soil conditioners-in agriculture is essential for converting waste into valuable resources. However, these materials can also contribute to the spread of antimicrobial-resistant pathogens in treated soils. In this study, we analyzed different soil conditioners categorized into five groups: compost from source-separated biowaste and green waste, agro-industrial digestate, digestate from anaerobic digestion of source-separated biowaste, compost from biowaste digestate, and sludges from wastewater treatment plants. Under Italian law, only the first two categories are approved for agricultural use, despite Regulation 1009/2019/EU allowing the use of digestate from anaerobic digestion of source-separated biowaste in CE-marked fertilizers. We examined the bacterial community and associated resistome of each sample using metagenomic approaches. Additionally, we detected and isolated various pathogens to provide a comprehensive understanding of the potential risks associated with sludge application in agriculture. The compost samples exhibited higher bacterial diversity and a greater abundance of potentially pathogenic bacteria compared to other samples, except for wastewater treatment plant sludges, which had the highest frequency of Salmonella isolation and resistome diversity. Our findings suggest integrating omics and cultivation-dependent methods to accurately assess the biological risks of using sludge in agriculture.

Decision support model for selecting construction and demolition waste management alternatives: A life cycle-based approach.

Construction and demolition waste (C&DW) represents a pressing concern within the European Union, underscoring the urgent need for effective waste management strategies. The selection of these solutions constitutes a complex task, entailing the identification of efficient C&DW management strategies that balance appropriate practices, regulatory compliance, resource conservation, economic feasibility, and environmental considerations. LCA is widely utilized to assess environmental impact, yet the economic aspect has not been adequately incorporated into the LCA process in the field of C&DW management. The life cycle costing (LCC) methodology has been tailored to assess economic performance in conjunction with LCA. The selection of an appropriate multi-criteria decision-making (MCDM) method is vital for the C&DW system. This study proposes a novel framework for C&DW management by integrating LCA and LCC outcomes into MCDM, using AHP for weight determination, and applying TOPSIS to identify the favorable alternative. Four waste management alternatives were examined in the Lombardy region of Italy, namely (i) landfill; (ii) recycling for concrete production and road construction, incineration with energy recovery; (iii) recycling for road construction; (iv) recycling for concrete production and road construction. We determine that, with the implementation of various scenarios, the most suitable scenario emerges to be recycled for concrete production and road construction, with a score of 0.711/1; recycling for road construction with final score 0.291/1, ranks second; recycling for concrete production and road construction, incineration with energy recovery scores 0.002/1, ranks third; and landfill (scores: 0/1) is the worst choice, signifying it has the highest environmental impacts and the least economic benefits. Lastly, recommendations were formulated to enhance the environmental performance of the system.

Microplastic pollution in the North-east Atlantic Ocean surface water: How the sampling approach influences the extent of the issue.

A lack of standardization in monitoring protocols has hindered the accurate evaluation of microplastic (MP) pollution in the open sea and its potential impacts. As sampling techniques significantly influence the amounts of MPs contained in the sample, the aim of this study was to compare two sampling methods: Manta trawl (size selective approach) and grab sampling (volume selective approach). Both approaches were applied in the open sea surface waters of the North-east Atlantic Ocean. Onshore sample processing was carried out using the innovative tape lifting technique, which affords a series of advantages, including prevention of airborne contamination during analysis, without compromising integrity of the results. The results obtained indicated an MP concentration over four orders of magnitude higher using grab sampling compared to the Manta net approach (mean values equal to 0.24 and 4050 items/m3, respectively). Consequently, the sole quantification of MPs using results obtained with the Manta trawl resulted in a marked underestimation of abundance. Nevertheless, the grab sampling technique is intricately linked to a risk of collecting non-representative water volumes, consequently leading to an overestimation of MPs abundance and a significant inter-sample variability. Moreover, the latter method is unsuitable for use in sampling larger MPs or in areas with low concentrations of MP pollution. The optimal sampling method therefore is dependent on the specific objectives of the study, often resulting in a combination of size and volume selective methods. The results of this study have the potential to contribute to the standardization of monitoring protocols for microplastics, both during the sampling phase and sample processing.

Biodegradability of bioplastics in different aquatic environments: A systematic review.

Bioplastics were first introduced as environmentally friendly materials, with properties similar to those of conventional plastics. A bioplastic is defined as biodegradable if it can be decomposed into carbon dioxide under aerobic degradation, or methane and CO2 under anaerobic conditions, inorganic compounds, and new cellular biomass, by the action of naturally occurring microorganisms. This definition however does not provide any information on the environmental conditions, timescale and extent at which decomposition processes should occur. With regard to the aquatic environment, recognized standards have been established to assess the ability of plastics to undergo biodegradation; however, these standards fail to provide clear targets to be met to allow labelling of a bioplastic as biodegradable. Moreover, these standards grant the user an extensive leeway in the choice of process parameters. For these reasons, the comparison of results deriving from different studies is challenging. The authors analysed and discussed the degree of biodegradability of a series of biodegradable bioplastics in aquatic environments (both fresh and salt water) using the results obtained in the laboratory and from on-site testing in the context of different research studies. Biochemical Oxygen Demand (BOD), CO2 evolution, surface erosion and weight loss were the main parameters used by researchers to describe the percentage of biodegradation. The results showed a large variability both in weight loss and BOD, even when evaluating the same type of bioplastics. This confirms the need for a reference range of values to be established with regard to parameters applied in defining the biodegradability of bioplastics.

Integration of life cycle assessment and system dynamics modeling for environmental scenario analysis: A systematic review.

System dynamics (SD) is widely recognized as a tool for simulating spatial and temporal dynamics in life cycle assessment (LCA) studies of the product system. However, there is no agreement on how SD and LCA could be applied effectively together in a consistent way. To address this gap, this research conducted a systematic literature review, analyzing 54 scientific articles published worldwide between 2010 and 2023, to explore the joint application of LCA with SD. The study aimed to answer three research questions: (1) What can be considered an integration of LCA and SD? (2) How can SD and LCA be effectively integrated? and (3)What are the advantages and constraints of this integration? The results highlighted the popularity of LCA and SD as impact assessment tools for sustainable design, each with its own strengths and limitations. Two primary integration types were identified when LCA was jointly applied with SD: (1) inclusion of the life cycle inventory and characterization factors in an SD model, and (2) inclusion of SD model results in an LCA. In the second type of integration, SD models the components of the technical system, and its outcomes served as input for scenario analysis, providing temporal and potentially spatial inventory data for the LCA model. The integrated approach offers a comprehensive understanding of product sustainability, aids decision-making, and enhances stakeholder engagement. The study also identifies knowledge gaps in the joint application of SD and LCA for environmental scenario analysis, suggesting the incorporation of optimization tools and strategy guidance for policy makers.

Treatment of wastewater using Black Soldier Fly larvae: Effect of organic concentration and load.

Recent studies have investigated the use of Black Soldier Fly (BSF) larvae as a promising biological treatment process for high organic content wastewater (i.a. Leachate from municipal solid waste landfill, food processing effluents), achieving both high treatment efficiency and production of secondary resources from larval biomass (i.a. Proteins and lipids). The present study was aimed at achieving a better understanding of how organic concentration and load might influence treatment performance. Larvae were fed with three artificial wastewaters characterised by same organic substances quality (degree of biodegradability and oxidation of the organic content measured respectively as BOD/COD and TOC/COD ratios) but different organic concentrations. Each type of wastewater was tested at four different loads. Treatment performance was assessed by monitoring both larval growth (in terms of weight variation, mortality and prepupation), and variation of wastewater quality and quantity to determine organic substrate consumption (measured in terms of Total Organic Carbon, TOC). Larval starvation was observed in all tests when TOC concentrations dropped below approx. 1000 mg C/L, which, for the tested wastewater, could be assumed as the limit value for adopting BSF larvae process. Substrate concentration in the feed (mgC/L) influenced larval growth (in terms of maximum wet weight, prepupation and mortality) only when organic load was above 10 mgC/larva: the higher the load, the higher the positive impact of the substrate concentration. On the contrary, the specific substrate consumption rate (vS, mgC/larva/day) appeared not to be influenced by substrate concentration but only by the organic load, with a Michaelis Menten like relationship. Accordingly, substrate load can be assumed as a design parameter for BSF treatment process, while substrate concentration might only influence potential resource recovery from larval biomass.

Treatment of food waste contaminated by bioplastics using BSF larvae: Impact and fate of starch-based bioplastic films.

The use of Black Soldier Fly (BSF) larvae in the treatment of biowaste, including food waste, represents a promising new (waste) treatment option. In line with an increasing use of starch-based bioplastics in food packaging, (e.g. shopper films), food waste contamination by these polymers is expected to rise, but the fate of these materials and impact produced on the BSF treatment process remain to be clarified. In the present study, food waste contaminated by starch-based bioplastic film was treated using a BSF larvae process with the aim of investigating both the effect of bioplastics on process performance and the effect of BSF larvae on bioplastic degradation. Larvae treatment performance was assessed by monitoring substrate degradation process and larvae growth in terms of weight variation and development time. Bioplastic degradation (both in the larvae process and in a larvae-free control test) was assessed by means of visual inspection, Scanning Electron Microscopy (SEM), Fourier Transform InfraRed spectroscopy (FTIR), Differential Scanning Calorimetry (DSC) and ThermoGravimetric Analysis (TGA). The results obtained highlighted the absence of negative impacts of bioplastics on the BSF process, revealing a modestly higher degree of degradation in the larvae process compared to control test. The process however failed to achieve complete degradation of bioplastics, suggesting the need for additional post-processing treatments.

Washing of residues from the circular economy prior to sustainable landfill: Effects on long-term impacts.

Sustainable landfill continues to play a fundamental role in closing the loop of residual materials of the circular economy. The sustainable landfill relies on both pretreatments and in situ treatments to stabilize the residual waste and immobilize the contaminants, achieving the final storage quality (FSQ) within one generation (typically 30 years). The aim of the study was to investigate the efficiency of the waste washing pretreatment in reducing the waste leaching fraction prior to landfilling, and in decreasing the time needed to reach the FSQ. A laboratory scale washing test was performed on three different kinds of residues from municipal solid waste treatment, usually landfilled: residues sieved from separately collected bio-waste (RB); residues sieved from compost (RC); and residues sieved from mixed waste treatment-plastic line (RP). Column landfill simulation tests were performed to predict and compare the landfill long-term emissions of both washed and raw residues. The results revealed that the washing pretreatment significantly reduced the leachable fraction of contaminants, decreasing the time needed to reach the chemical oxygen demand and ammonia FSQ limits. However, RP residue was the only one respecting the FSQ limits within 30 years.

A review on membrane concentrate management from landfill leachate treatment plants: The relevance of resource recovery to close the leachate treatment loop.

Membrane filtration processes have been used to treat landfill leachate. On the other hand, closing the leachate treatment loop and finding a final destination for landfill leachate membrane concentrate (LLMC) - residual stream of membrane systems - is challenging for landfill operators. The re-introduction of LLMC into the landfill is typical; however, this approach is critical as concentrate pollutants may accumulate in the leachate treatment facility. From that, leachate concentrate management based on resource recovery rather than conventional treatment and disposal is recommended. This work comprehensively reviews the state-of-the-art of current research on LLMC management from leachate treatment plants towards a resource recovery approach. A general recovery train based on the main LLMC characteristics for implementing the best recovery scheme is presented in this context. LLMCs could be handled by producing clean water and add-value materials. This paper offers critical insights into LLMC management and highlights future research trends.

Treatment of wastewater using black soldier fly larvae, under different degrees of biodegradability and oxidation of organic content.

The biological treatment process based on the metabolism of Black Soldier Fly (BSF) larvae proved to be a highly promising technique for the treatment of high organic content (HOC) wastewater, such as sewage from food industries, leachate from municipal solid waste (MSW) landfill, etc. The present study was aimed at achieving a better understanding of how biodegradability and degree of oxidation of organic content might influence treatment performance and biomass quality. Six leachates characterised by similar COD (Chemical Oxygen Demand) but different BOD5/COD (Biochemical Oxygen demand/COD) and TOC/COD (Total Organic Carbon/COD) ratios were tested. By combining these ratios, the BOD5/TOC ratio was introduced to take into account the effect of both leachate properties (biodegradability and oxidation degree). Process treatment performance was significantly influenced by the quality of organic substances. Higher BOD5/TOC values (higher biodegradability and lower oxidation degree) resulted in a greater and faster larvae growth, with final wet weight of between 49.2 and 91.9mg/larva; lower mortality between 5 and 32%; higher prepupation percentages ranging from 4 to 21% and higher specific substrate consumption rate with values varying from 0.051 to 0.063 mgTOC/mg larva/d, up to 3-fold higher than values obtained using conventional activated sludge based on COD consumption. Conversely, no significant differences were detected in larvae protein and lipid contents, including the profiling of fatty acids.

Preparation of artificial MSW leachate for treatment studies: Testing on black soldier fly larvae process.

When approaching the study of new processes for leachate treatment, each influencing variable should be kept under control to better comprehend the treatment process. However, leachate quality is difficult to control as it varies dramatically from one landfill to another, and in line with landfill ageing. To overcome this problem, the present study investigated the option of preparing a reliable artificial leachate in terms of quality consistency and representativeness in simulating the composition of real municipal solid waste (MSW) leachate, in view of further investigate the recent treatment process using black soldier fly (BSF) larvae. Two recipes were used to simulate a real leachate (RL): one including chemical ingredients alone (artificial synthetic leachate-SL), and the other including chemicals mixed with artificial food waste (FW) eluate (artificial mixed leachate-ML). Research data were analysed, elaborated and discussed to assess simulation performance according to a series of parameters, such as Analytical representativeness, Treatment representativeness (in this case specific for the BSF larvae process), Recipe relevance, Repeatability and Flexibility in selectively modifying individual quality parameters. The best leachate simulation performance was achieved by the synthetic leachate, with concentration values generally ranging between 97% and 118% of the RL values. When feeding larvae with both RL and SL, similar mortality values and growth performance were observed.

Enabling Circular Economy: The Overlooked Role of Inorganic Materials Chemistry.

Circular economy is considered a new chance to build a more sustainable world from both the social and the economic point of view. In this Essay, the possible contribution of inorganic chemistry towards a smooth transition to circularity in inorganic materials design and production is discussed by adopting an interdisciplinary approach.

Organic waste biorefineries: Looking towards implementation.

The concept of biorefinery expands the possibilities to extract value from organic matter in form of either bespoke crops or organic waste. The viability of biorefinery schemes depends on the recovery of higher-value chemicals with potential for a wide distribution and an untapped marketability. The feasibility of biorefining organic waste is enhanced by the fact that the biorefinery will typically receive a waste management fee for accepting organic waste. The development and implementation of waste biorefinery concepts can open up a wide array of possibilities to shift waste management towards higher sustainability. However, barriers encompassing environmental, technical, economic, logistic, social and legislative aspects need to be overcome. For instance, waste biorefineries are likely to be complex systems due to the variability, heterogeneity and low purity of waste materials as opposed to dedicated biomasses. This article discusses the drivers that can make the biorefinery concept applicable to waste management and the possibilities for its development to full scale. Technological, strategic and market constraints affect the successful implementations of these systems. Fluctuations in waste characteristics, the level of contamination in the organic waste fraction, the proximity of the organic waste resource, the markets for the biorefinery products, the potential for integration with other industrial processes and disposal of final residues are all critical aspects requiring detailed analysis. Furthermore, interventions from policy makers are necessary to foster sustainable bio-based solutions for waste management.

Lab tests on semi-aerobic landfilling of MSW under varying conditions of water availability and putrescible waste content.

Semi-aerobic landfilling is applied increasingly as a sustainable technology worldwide, although frequently controversial results are achieved. The authors suggest that differences in water availability (climate, moisture content, etc.) and putrescible waste content are the key factors involved in controlling performance and efficiencies. The aim of the present study was to investigate the effect of inverse conditions (high/low) of these two factors. Six lab-scale lysimeters were specifically set up to correspond to three different conditions of water availability (wet conditions, dry conditions and artificially controlled watering under dry conditions) and two different waste types (high and low putrescible content). Lysimeters were operated for four months under thermal-insulated conditions and the quality and quantity of emissions monitored regularly. Concentrations of mobile ammonia and total organic carbon (TOC) in landfilled waste were modelled by means of first-order kinetics, and carbon and nitrogen mass balances were calculated. The best performance for the semi-aerobic process was achieved at a water availability of approximately 1.5-2.4 kgH2O/kgTS using the following two combinations: a) Waste with high putrescible content and no addition of external water due to the presence of sufficient endogenous water in the waste (moisture) to promote biological stabilisation of waste (Respiration index in 4 days, RI4 = 12.87 mgO2/gTS, BOD/COD < 0.05); b) Waste with low putrescible content and controlled watering (RI4 = 12.25 mgO2/gTS, BOD/COD < 0.04). The study highlighted how semi-aerobic landfilling operations should be carefully adjusted case by case according to waste quality and climate conditions.

The treatment of leachate using Black Soldier Fly (BSF) larvae: Adaptability and resource recovery testing.

The benefits of using Black Soldier Fly (BSF) larvae in biowaste treatment include: commercial value of the stabilized residue, production of biomass rich in fats and proteins, suitable both for biodiesel production and animal feeding. The use of BSF for leachate treatment would introduce a blue low cost solution in the landfill technology, particularly appropriate in developing countries, where landfilling is still widely applied. This paper aimed to investigate the adaptability of BSF larvae to leachate environment, by using different leachate concentrations (25%, 50%, 75%, 100%) and two different feeding substrates: liquid (pure leachate) and semi-solid (wheat bran mixed with leachate). In all tests mortality was less than 50% and it was mainly linked to food shortages: the higher the nutrient content in leachate, the higher the larval development. Dry mass characterisation demonstrate that BSF prepupae biomass can be exploited as an alternative energy source in the production of biodiesel.

Potential treatment of leachate by Hermetia illucens (Diptera, Stratyomyidae) larvae: Performance under different feeding conditions.

In this study, the ability of H. illucens larvae (black soldier fly (BSF)) to metabolise different semisolid biowastes (e.g. kitchen waste, animal manure) has been applied to the treatment of landfill leachate. A testing programme has been developed by mixing leachate with three different solid supports: wheat bran, a biodegradable nutrient substrate, brewers' spent grain, a biodegradable nutrient residue from the brewery industry and sawdust, a low biodegradable residue from the wood industry. Larvae growth rate was monitored in terms of weight variation, mortality and time to reach the prepupal stage. Prepupal biomass composition was analysed in terms of crude protein, lipids and fatty acids. Substrates were monitored at the beginning and the end of tests for total solids (TS), total organic carbon (TOC), total Kjeldahl nitrogen (TKN), ammonia and (whenever significant) the 7-day Respirometric Index (RI7). The best performance was observed with wheat bran and brewers' spent grain, achieving an average larval weight ranging from 155.1 to 226.1 mg (w/w) with prepupation of more than 80% over 21 days. The initial TS, TOC and nitrogen content in feeding substrates had been metabolised (gasified and accumulated in prepupal biomass) by approximately 55%, 60% and 48%, respectively. Dry mass characterisation displayed a significant content of fats and proteins. The analysis demonstrated the suitability of BSF prepupal biomass for the production of biodiesel; however, the potential use of proteins as an animal feed needs further studies for assessing the presence of contaminants.

Exploring dynamic membrane as an alternative for conventional membrane for the treatment of old landfill leachate.

This study compares the performance of a lab-scale pre-anoxic and post-aerobic submerged dynamic membrane bioreactor (DMBR) with similar studies on conventional membrane bioreactors (MBRs) for the treatment of old landfill leachate (LFL) while presenting a strategy to achieve stable DMBR operation. The results suggested that DMBR performed similar, or in some cases, better than MBRs. Like conventional MBRs treating LFL, DMBR can also accommodate large variations in operating parameters including influent feed composition and loading rates and thus, it can guarantee long term stable bioreactor operation (total nitrogen removal up to 98%) with acceptable effluent quality (Turbidity < 10 NTU). The results also demonstrated that gradual increment in influent LFL concentration was found to be effective for a stable DMBR operation however, it significantly deteriorated dynamic membrane (DM) filtration performance (p < 10E-7), resulting in higher fouling rate and deteriorated effluent quality. Nonetheless, poor DM performance and higher fouling rate were effectively controlled by using lower mesh porosity (52 µm instead of 200 µm) and increase in DM effective filtration area.