Bulnesia sarmientoi Supercritical Fluid Extract Exhibits Necroptotic Effects and Anti-Metastatic Activity on Lung Cancer Cells.

Bulnesia sarmientoi (BS) has long been used as an analgesic, wound-healing and anti-inflammatory medicinal plant. The aqueous extract of its bark has been demonstrated to have anti-cancer activity. This study investigated the anti-proliferative and anti-metastatic effects of BS supercritical fluid extract (BSE) on the A549 and H661 lung cancer cell lines. The cytotoxicity on cancer cells was assessed by an MTT assay. After 72 h treatment of A549 and H661 cells, the IC50 values were 18.1 and 24.7 µg/mL, respectively. The cytotoxicity on MRC-5 normal cells was relatively lower (IC50 = 61.1 µg/mL). BSE arrested lung cancer cells at the S and G2/M growth phase. Necrosis of A549 and H661 cells was detected by flow cytometry with Annexin V-FITC/PI double staining. Moreover, the cytotoxic effect of BSE on cancer cells was significantly reverted by Nec-1 pretreatment, and BSE induced TNF-α and RIP-1 expression in the absence of caspase-8 activity. These evidences further support that BSE exhibited necroptotic effects on lung cancer cells. By wound healing and Boyden chamber assays, the inhibitory effects of BSE on the migration and invasion of lung cancer cells were elucidated. Furthermore, the chemical composition of BSE was examined by gas chromatography-mass analysis where ten constituents of BSE were identified. α-Guaiene, (-)-guaiol and ß-caryophyllene are responsible for most of the cytotoxic activity of BSE against these two cancer cell lines. Since BSE possesses significant cytotoxicity and anti-metastatic activity on A549 and H661 cells, it may serve as a potential target for the treatment of lung cancer.

A novel recombinant chlorophyllase from cyanobacterium Cyanothece sp. ATCC 51142 for the production of bacteriochlorophyllide a.

Bacteriopheophorbide a (BPheid a) is used as a precursor for bacteriochlorin a (BCA), which can be used for photodynamic therapy in both in vitro and in vivo biochemical applications. This study successfully isolated and expressed a photosynthetic bacterium (Cyanothece sp. ATCC 51142) chlorophyllase called CyanoCLH, which can be used as a biocatalyst for the production of a BCA precursor by degrading bacteriochlorophyll a (BChl a). Substrate specificity and enzyme kinetic analyses were performed and the results verified that the recombinant CyanoCLH preferred hydrolyzing BChl a to produce bacteriochlorophyllide a (BChlide a), which can be converted to BPheid a by removing magnesium ion. The recombinant CyanoCLH was cloned and expressed in Escherichia coli BL-21 (DE3), and its molecular weight was 54.7 kDa. The deduced amino acid sequence of the recombinant CyanoCLH comprised a unique lipase-motif GHSLG, which differs from the GHSRG sequence of other plants and lacks a histidine of the typical and conserved catalytic triad Ser-Asp-His. The recombinant CyanoCLH was subjected to biochemical analyses, and the results indicated that its optimal pH and temperature were 7.0 and 60 °C, respectively.

Characterization of codon-optimized recombinant candida rugosa lipase 5 (LIP5).

Recombinant Candida rugosa lipase 5 (LIP5) has been functionally expressed along with other isoforms in our laboratory. However, the characterization and codon optimization of LIP5 have not been done. In this work, we characterized, codon-optimized and compared LIP5 with commercial lipase. LIP5 activity on hydrolysis of p-nitrophenyl (p-NP) butyrate was optimal at 55 °C as compared with 37 °C of the commercial lipase. Several assays were also performed to determine the substrate specificity of LIP5. p-NP butyrate (C(4)), butyryl-CoA (C(4)), cholesteryl laurate (C(12)), and N-carbobenzoxy-l-tyrosine-p-nitrophenyl ester (l-NBTNPE) were found as preferred substrates of LIP5. Interestingly, LIP5 specificity on hydrolysis of amino acid-derivative substrates was shown to be the highest among any lipase isoforms, but it had very weak preference on hydrolyzing triacylglycerol substrates. LIP5 also displays a pH-dependent maximum activity of a lipase but an esterase substrate preference in general. The characterization of LIP5 along with that of LIP1-LIP4 previously identified shows that each lipase isoform has a distinct substrate preference and catalytic activity.

Site-specific saturation mutagenesis on residues 132 and 450 of Candida rugosa LIP2 enhances catalytic efficiency and alters substrate specificity in various chain lengths of triglycerides and esters.

The catalytic versatility of recombinant Candida rugosa LIP2 has been known to have potential applications in industry. In this study, site-specific saturation mutagenesis on residues L132 and G450 of recombinant LIP2 has been employed to investigate the impact of both residues on substrate specificity of LIP2. Point mutations on L132 and G450 were done separately using mutagenic degenerate primer sets containing 32 codons to generate two libraries of mutants in Pichia pastoris . Replacements of amino acid on these mutants were identified as L132A, L132I, G450S, and G450A. In lipase activity assay, L132A and L132I mutants showed a shift of preference from short- to medium-chain triglyceride, whereas G450S and G450A mutants retained preferences as compared to wild-type LIP2. Among mutants, G450A has the highest activity on tributyrin. However, hydrolysis of p-nitrophenyl (p-NP) esters with L132A, L132I, and G450S did not show differences of preferences over medium- to long-chain esters except in G450A, which prefers only medium-chain ester as compared to wild-type LIP2. All mutants showed an enhanced catalytic activity and higher optimal temperature and pH stability as compared to wild-type LIP2.

Functional role of a non-active site residue Trp(23) on the enzyme activity of Escherichia coli thioesterase I/protease I/lysophospholipase L(1).

Escherichia coli possesses a versatile protein with the enzyme activities of thioesterase I, protease I, and lysophospholipase L(1). The protein is dubbed as TAP according to the chronological order of gene discovery (TesA/ApeA/PldC). Our previous studies showed that TAP comprises the catalytic triad Ser(10), Asp(154), and His(157) as a charge relay system, as well as Gly(44) and Asn(73) residues devoted to oxyanion hole stabilization. Geometrically, about 10 A away from the enzyme catalytic cleft, Trp(23) showed a stronger resonance shift than the backbone amide resonance observed in the nuclear magnetic resonance (NMR) analyses. In the present work, we conducted site-directed mutagenesis to change Trp into alanine (Ala), phenylalanine (Phe), or tyrosine (Tyr) to unveil the role of the Trp(23) indole ring. Biochemical analyses of the mutant enzymes in combination with TAP's three-dimensional structures suggest that by interlinking the residues participating in this catalytic machinery, Trp(23) could effectively influence substrate binding and the following turnover number. Moreover, it may serve as a contributor to both H-bond and aromatic-aromatic interaction in maintaining the cross-link within the interweaving framework of protein.

Identification and characterization of a lipase gene from Antrodia cinnamomea.

A partial (634 bp) cDNA clone, AF1229, obtained from expressed sequence tags (ESTs) of solid-cultured basidiomes of Antrodia cinnamomea is homologous to the lipase gene in Rhizomucor miehei. 5'-rapid amplification of cDNA ends (RACE) and 3'-RACE amplification showed that the full-length lipase gene, Ac-LIP, has a 912bp open reading frame (ORF), a 183bp 5' non-coding region, and a 144bp 3' non-coding region. Ac-LIP contains the lipase consensus sequence, VTVVGHSLGA, and encodes a 303-amino acid polypeptide that appears to be an extracellular protein with a calculated molecular mass of 31.8 kDa. RT-PCR analysis suggested that Ac-LIP was strongly expressed during the basidiomatal formation stage of A. cinnamomea. When over-expressed in Escherichia coli, Ac-LIP yielded a protein that was capable of performing hydrolysis of trilinolein by gas chromatography/mass spectrometry (GC/MS) analysis. A. cinnamomea lipase represents the first enzyme of the lipase family from a basidiomycetous fungus, which has been characterized at the molecular level.

Enhanced preference for pi-bond containing substrates is correlated to Pro110 in the substrate-binding tunnel of Escherichia coli thioesterase I/protease I/lysophospholipase L(1).

Escherichia coli thioesterase I/protease I/lysophospholipase L(1) (TAP) possesses multifunctional enzyme with thioesterase, esterase, arylesterase, protease, and lysophospholipase activities. Leu109, located at the substrate-binding tunnel, when substituted with proline (Pro) in TAP, shifted the substrate-preference from medium-to-long acyl chains to shorter acyl chains of triglyceride and p-nitrophenyl ester, and increased the preference for aromatic-amino acid-derived esters. In the three-dimensional TAP structures, the only noticeable alteration of backbone and side chain conformation was located at the downstream Pro110-Ala123 region rather than at Pro109 itself. The residue Pro110, adjacent to Leu109 or Pro109, was found to contribute to the substrate preference of TAP enzymes for esters containing acyl groups with pi bond(s) or aromatic group(s). Some of the interactions between the enzyme protein and the substrate may be contributed by an attractive force between the Pro110 C-H donor and the substrate pi-acceptor.

Altering the substrate specificity of Candida rugosa LIP4 by engineering the substrate-binding sites.

Candida rugosa (formerly Candida cylindracea) lipase (CRL) is an important industrial enzyme that is widely used in biotechnological applications such as the production of fatty acids and the synthesis of various esters. CRL comprises at least seven isozymes (LIP1-LIP7), which share a similar amino acid sequence but with different specificities for substrates. Previously, LIP4 was reported to have higher esterase activity toward long acyl-chain ester and lower lipase activity toward triglycerides. A296 and V344 of LIP4 were predicted to play decisive roles in its substrate specificity. In this study, site-specific saturation mutagenesis has been employed to study the substrate specificity of LIP4. Point mutations were separately introduced into A296 and V344 positions using degenerate primer sets containing 32 codons to generate two libraries of variants. LIP4 variants were heterologously expressed in the yeast Pichia pastoris. A specific plate assay was used to identify lipase-producing P. pastoris clones in a medium containing tributyrin. LIP4 variants with high activity toward short fatty acyl-chain triglyceride (tributyrin) were screened. Specificity analysis and biochemical characterization indicated that the recombinant variants A296I, V344Q, and V344H had properties remarkably different from those of wild-type LIP4. All three variant enzymes had significantly higher specific activities toward tributyrin than LIP4. In addition to short-chain triglyceride, A296I and V344Q also improved hydrolytic activities of triglycerides toward medium- and long-chain triglycerides tested. The results suggested that A296 played an important role in lipase activity and high-temperature dependence of LIP4, whereas it had no effect on the chain-length specificity in lipolytic reaction. The V344 residue had a significant effect on the substrate chain-length specificity of LIP4.

Functional role of catalytic triad and oxyanion hole-forming residues on enzyme activity of Escherichia coli thioesterase I/protease I/phospholipase L1.

Escherichia coli TAP (thioesterase I, EC 3.1.2.2) is a multifunctional enzyme with thioesterase, esterase, arylesterase, protease and lysophospholipase activities. Previous crystal structural analyses identified its essential amino acid residues as those that form a catalytic triad (Ser10-Asp154-His157) and those involved in forming an oxyanion hole (Ser10-Gly44-Asn73). To gain an insight into the biochemical roles of each residue, site-directed mutagenesis was employed to mutate these residues to alanine, and enzyme kinetic studies were conducted using esterase, thioesterase and amino-acid-derived substrates. Of the residues, His157 is the most important, as it plays a vital role in the catalytic triad, and may also play a role in stabilizing oxyanion conformation. Ser10 also plays a very important role, although the small residual activity of the S10A variant suggests that a water molecule may act as a poor substitute. The water molecule could possibly be endowed with the nucleophilic-attacking character by His157 hydrogen-bonding. Asp154 is not as essential compared with the other two residues in the triad. It is close to the entrance of the substrate tunnel, therefore it predominantly affects substrate accessibility. Gly44 plays a role in stabilizing the oxyanion intermediate and additionally in acyl-enzyme-intermediate transformation. N73A had the highest residual enzyme activity among all the mutants, which indicates that Asn73 is not as essential as the other mutated residues. The role of Asn73 is proposed to be involved in a loop75-80 switch-move motion, which is essential for the accommodation of substrates with longer acyl-chain lengths.

Multiple mutagenesis of non-universal serine codons of the Candida rugosa LIP2 gene and biochemical characterization of purified recombinant LIP2 lipase overexpressed in Pichia pastoris.

The 17 non-universal serine codons (CTG) in the Candida rugosa LIP2 gene have been converted into universal serine codons (TCT) by overlap extension PCR-based multiple site-directed mutagenesis. An active recombinant LIP2 lipase was overexpressed in Pichia pastoris and secreted into the culture medium. The recombinant LIP2 showed distinguishing catalytic activities when compared with recombinant LIP4 and commercial C. rugosa lipase. The purified enzyme showed optimum activity at pH 7 and a broad temperature optimum in the range 30-50 degrees C. The enzyme retained 80% of residual activity after being heated at 70 degrees C for 10 min. Recombinant LIP2 demonstrated high esterase activity towards long-chain (C12-C16) p-nitrophenyl esters. Tributyrin was the preferred substrate among all triacylglycerols tested for lipolysis. Among cholesteryl esters, LIP2 showed highest lipolytic activity towards cholesteryl laurate. The esterification of myristic acid with alcohols of various chain lengths showed that the long-chain n-octadecanol (C18) was the preferred substrate. In contrast, the esterification of n-propanol with fatty acids of various chain lengths showed that the short-chain butyric acid was the best substrate. From comparative modelling analysis, it appears that several amino acid substitutions resulting in greater hydrophobicity in the substrate-binding site might play an important role in the substrate specificity of LIP2.