RESUMEN
A fundamental understanding of aging processes in lithium-ion batteries (LIBs) is imperative in the development of future battery architectures for widespread electrification. Herein, dissolution of transition metals from cathode active materials of LIBs is among the most important degradation processes. Research has demonstrated that elevated operating temperatures accelerate battery degradation. However, the exact mechanism of transition-metal dissolution at elevated temperatures has still to be clarified. Current literature suggests that the reaction rate of dissolution increases with increasing temperature; moreover, the decomposition of electrolytes results in products that also accelerate dissolution processes. Most studies focus on ex situ analyses of thermally treated full cells. This approach is not appropriate to get detailed insights and to distinguish between different contributions. In this work, with the help of real-time dissolution analysis using an electroanalytical flow cell (EFC) coupled to an inductively coupled plasma mass spectrometer (ICP-MS), we present novel details of the temperature effects on in situ dissolution at the cathode electrolyte interface. With fresh electrolytes, we find increased Mn dissolution even at open-circuit conditions as well as with constant voltage polarization when the electrode sample is heated at constant temperatures between 50 and 80 °C. The release of transition metals also responds in a nuanced manner when applying temperature transients. Utilizing electrolytes preheated at 60 and 100 °C, we demonstrate that decomposition products in the bulk electrolyte have no influence on transition-metal (TM) dissolution when constantly flushing the cell with the thermally aged electrolyte samples. Only when keeping the cathode temperature at 60 °C, the dissolution increases by a factor of 2-3. Our findings highlight the interplay between the cathode and electrolyte and provide new insights into the dissolution mechanism of cathode materials.
RESUMEN
In this research, waste stone sludge obtained from slab stone processing and waste silt from aggregate washing plants were recycled to manufacture artificial aggregate. Fine-powdered stone sludge was mixed with waste silt of larger particle size; vibratory compaction was applied for good water permeability, resulting in a smaller amount of solidifying agent being used. For the densified packing used in this study, the mix proportion of waste stone sludge to waste silt was 35:50, which produced artificial aggregate of more compact structure with water absorption rate below 0.1%. In addition, applying vibratory compaction of 33.3 Hz to the artificial aggregate and curing for 28 days doubled the compressive strength to above 29.4 MPa. Hence, recycling of waste stone sludge and waste silt for the production of artificial aggregate not only offers a feasible substitute for sand and stone, but also an ecological alternative to waste management of sludge and silt.
Asunto(s)
Materiales de Construcción , Sedimentos Geológicos , Residuos Industriales , Reciclaje/métodos , Eliminación de Residuos , Administración de Residuos , Tamaño de la Partícula , Material Particulado , Permeabilidad , Aguas del Alcantarillado , Estrés Mecánico , Vibración , AguaRESUMEN
A sequential extraction method has been applied for the determination of binding forms of trace elements in the municipal solid waste incineration (MSWI) fly ash and evaluating their leaching behavior in view of their potential environmental impact. The elemental determinations in the different leachates are performed by ICP-AES and ICP-MS, respectively. The morphology and mineralogical phases after extraction step were performed by scanning electron microscopy (SEM). Total of 20 elements in the samples are investigated. A reference material of city waste incineration fly ash (BCR No. 176) is also tested to examine the applicability as well as accuracy of the proposed method. The sum of most elements present in the individual fractions shows a good agreement with the total elemental concentrations. The extraction efficiencies are generally higher than 80% except for that of Cr and V. The extractable data of most elements give information about the binding forms of various elements in both incineration fly ashes. It was found that the elements such as Ca, K, Na, Pb, Zn, Cd, Cu and Sr have exhibited a remarkable mobility in fly ash. More than half of them would be dissolved or exchanged under a mild leaching condition. The toxic elements such as Pb, Cd, Zn and Cu have a great potential to be released into the environment under normal conditions.
Asunto(s)
Carbono/química , Incineración , Metales/análisis , Material Particulado/química , Contaminantes Químicos del Agua/análisis , Carbono/análisis , Fraccionamiento Químico , Ceniza del Carbón , Espectrometría de Masas , Material Particulado/análisis , Espectrofotometría AtómicaRESUMEN
Metal sludge from industrial wastewater treatment plants was mixed with mining residues to be recycled into lightweight aggregate (LWA) through sintering at different temperatures. The physical properties of the LWA thus obtained were examined by scanning electron microscopy analyzer (SEM) coupled with an energy dispersive X-ray analyzer (EDX). The sequential extraction method combined with inductively coupled plasma atomic emission spectrometry (ICP-AES) was employed to determine the concentration and distribution of hazardous toxic elements in the metal sludge-based artificial LWA. The results show that the leaching concentrations of Cd, Cr, Cu, and Pb present in the non-sintered raw aggregate pellets reached 7.4, 68.0, 96.0, and 61.4 mg/l, respectively, far exceeding the regulatory threshold. Sintering at 1150 degrees C for 15 min results in stronger chemical bonds being formed between the elements. Hence, after the first three steps of sequential extraction, the concentrations of Cr, Cu, and Pb reached 2.69, 1.50, and 1.88 mg/l at 1150 degrees C, while the final residues had total concentrations of 96.1, 88.4, and 60.6 mg/kg, respectively, with Cd undetected in both phases. The concentration levels fell within the regulatory threshold, indicating that the LWA fabricated from recycled metal sludge contains elements that are toxic and hazardous but not leached. Having no harmful effect on the environment, the metal sludge-based artificial LWA is not only safe but also practical with good physical properties.
Asunto(s)
Materiales de Construcción/análisis , Metales Pesados/análisis , Conservación de los Recursos Naturales , Contaminantes Ambientales/análisis , Calor , Residuos Industriales/análisis , Porosidad , Aguas del AlcantarilladoRESUMEN
In this study, artificial lightweight aggregate (LWA) manufactured from recycled resources was investigated. Residues from mining, fly ash from an incinerator and heavy metal sludge from an electronic waste water plant were mixed into raw aggregate pellets and fed into a tunnel kiln to be sintered and finally cooled rapidly. Various feeding and sintering temperatures were employed to examine their impact on the extent of vitrification on the aggregate surface. Microstructural analysis and toxicity characteristic leaching procedure (TCLP) were also performed. The results show that the optimum condition of LWA fabrication is sintering at 1150 degrees C for 15 min with raw aggregate pellets fed at 750 degrees C. The rapidly vitrified surface envelops the gas produced with the increase in internal temperature and cooling by spraying water prevents the aggregates from binding together, thus forming LWA with specific gravity of 0.6. LWA produced by sintering in tunnel kiln shows good vitrified surface, low water absorption rate below 5%, and low cylindrical compressive strength of 4.3 MPa. In addition, only trace amounts of heavy metals were detected, making the LWA non-hazardous for construction use.