RESUMEN
Zinc oxide (ZnO) is an attractive material for microscale and nanoscale devices. Its desirable semiconductor, piezoelectric and optical properties make it useful in applications ranging from microphones to missile warning systems to biometric sensors. This work introduces a demonstration of blending statistics and chemical etching of thin films to identify the dominant factors and interaction between factors, and develop statistically enhanced models on etch rate and selectivity of c-axis-oriented nanocrystalline ZnO thin films. Over other mineral acids, ammonium chloride (NH4Cl) solutions have commonly been used to wet etch microscale ZnO devices because of their controllable etch rate and near-linear behaviour. Etchant concentration and temperature were found to have a significant effect on etch rate. Moreover, this is the first demonstration that has identified multi-factor interactions between temperature and concentration, and between temperature and agitation. A linear model was developed relating etch rate and its variance against these significant factors and multi-factor interactions. An average selectivity of 73 : 1 was measured with none of the experimental factors having a significant effect on the selectivity. This statistical study captures the significant variance observed by other researchers. Furthermore, it enables statistically enhanced microfabrication processes for other materials.
RESUMEN
Here, we investigate the use of few-layer metal organic chemical vapor deposition (MOCVD) grown BN as a two-dimensional buffer layer for plasma enhanced atomic layer deposition (PE-ALD) of Al2O3 on graphene for top gated field effect transistors (FETs). The reactive nature of PE-ALD enables deposition of thin (2 nm) dielectrics directly on graphene and other two-dimensional materials without the need for a seed or functionalization layer; however, this also leads to significant oxidation of the graphene layer as observed by Raman. In FETs, we find this oxidation destroys conductivity in the graphene channel. By transferring thin (1.6 nm) MOCVD BN layers on top of graphene channels prior to PE-ALD, the graphene is protected from oxidation enabling BN/Al2O3 layers as thin as 4 nm. Raman and X-ray photoelectron spectroscopy on BN films show no significant oxidation caused by PE-ALD of Al2O3. Inserting the BN layer creates an atomically abrupt interface significantly reducing interface charges between the graphene and Al2O3 as compared to use of a 2 nm Al buffer layer. This results in a much smaller Dirac voltage (- 1 V) and hysteresis (0.9 V) when compared to FETs with the Al layer (VDirac = - 6.1 V and hysteresis = 2.9 V).
RESUMEN
The conductivity σ, quantum-based magnetoconductivity Δσ = σ(B) - σ(0), and Hall coefficient RH (= µH/σ) of degenerate, homoepitaxial, (010) Si-doped ß-Ga2O3, have been measured over a temperature range T = 9-320 K and magnetic field range B = 0-10 kG. With ten atoms in the unit cell, the normal-mode phonon structure of ß-Ga2O3 is very complex, with optical-phonon energies ranging from kTpo ~ 20-100 meV. For heavily doped samples, the phonon spectrum is further modified by doping disorder. We explore the possibility of developing a single function Tpo(T) that can be incorporated into both quantum and classical scattering theory such that Δσ vs B, Δσ vs T, and µH vs T are all well fitted. Surprisingly, a relatively simple function, Tpo(T) = 1.6 × 103{1 - exp[-(T + 1)/170]} K, works well for ß-Ga2O3 without any additional fitting parameters. In contrast, Δσ vs T in degenerate ScN, which has only one optical phonon branch, is well fitted with a constant Tpo = 550 K. These results indicate that quantum conductivity enables an understanding of classical conductivity in disordered, multi-phonon semiconductors.
RESUMEN
Plasmon based field effect transistors (FETs) can be used to convert energy induced by incident optical radiation to electrical energy. Plasmonic FETs can efficiently detect incident light and amplify it by coupling to resonant plasmonic modes thus improving selectivity and signal to noise ratio. The spectral responses can be tailored both through optimization of nanostructure geometry as well as constitutive materials. In this paper, we studied various plasmonic nanostructures using gold for a wideband spectral response from visible to near-infrared. We show, using empirical data and simulation results, that detection loss exponentially increases as the volume of metal nanostructure increases and also a limited spectral response is possible using gold nanostructures in a plasmon to electric conversion device. Finally, we demonstrate a plasmon FET that offers a broadband spectral response from visible to telecommunication wavelengths.
RESUMEN
A ceramic/graphene metamaterial (GCM) with microstructure-derived superelasticity and structural robustness is achieved by designing hierarchical honeycomb microstructures, which are composited with two brittle constituents (graphene and ceramic) assembled in multi-nanolayer cellular walls. Attributed to the designed microstructure, well-interconnected scaffolds, chemically bonded interface, and coupled strengthening effect between the graphene framework and the nanolayers of the Al2 O3 ceramic (NAC), the GCM demonstrates a sequence of multifunctional properties simultaneously that have not been reported for ceramics and ceramics-matrix-composite structures, such as flyweight density, 80% reversible compressibility, high fatigue resistance, high electrical conductivity, and excellent thermal-insulation/flame-retardant performance simultaneously. The 3D well-ordered graphene aerogel templates are strongly coupled with the NAC by the chemically bonded interface, exhibiting mutual strengthening, compatible deformability, and a linearly dependent relationship between the density and Young's modulus. Considerable size effects of the ceramic nanolayers on the mechanical properties are revealed in these ceramic-based metamaterials. The designed hierarchical honeycomb graphene with a fourth dimensional control of the ceramic nanolayers on new ways to scalable fabrication of advanced multifunctional ceramic composites with controllable design suggest a great potential in applications of flexible conductors, shock/vibration absorbers, thermal shock barriers, thermal insulation/flame-retardant skins, and porous microwave-absorbing coatings.