RESUMEN
The purpose of this study was to examine the propulsion asymmetries of wheelchair athletes while sprinting on an instrumented, dual-roller ergometer system. Eighteen experienced wheelchair rugby players (8 low point (LP) (class ≤1.5) and 10 high point (HP) (class ≥2.0)) performed a 15-second sprint in their sports wheelchair on the instrumented ergometer. Asymmetry was defined as the difference in distance and power output (PO) between left and right sides when the best side reached 28 m. Propulsion techniques were quantified based on torque and velocity data. HP players covered an average 3 m further than the LP players (P = .002) and achieved faster sprint times than LP players (6.95 ± 0.89 vs 8.03 ± 0.68 seconds, P = .005) and at the time the best player finished (5.96 seconds). Higher peak POs (667 ± 108 vs 357 ± 78 W, P = .0001) and greater peak speeds that were also evident were for HP players (4.80 ± 0.71 vs 4.09 ± 0.45 m/s, P = .011). Greater asymmetries were found in HP players for distance (1.86 ± 1.43 vs 0.70 ± 0.65 m, P = .016), absolute peak PO (P = .049), and speed (0.35 ± 0.25 vs 0.11 ± 0.10 m/s, P = .009). Although HP players had faster sprint times over 28 m (achieved by a higher PO), high standard deviations show the heterogeneity within the two groups (eg, some LP players were better than HP players). Quantification of asymmetries is important not only for classifiers but also for sports practitioners wishing to improve performance as they could be addressed through training and/or wheelchair configuration.
Asunto(s)
Rendimiento Atlético , Personas con Discapacidad , Fútbol Americano , Silla de Ruedas , Adulto , Atletas , Fenómenos Biomecánicos , Ergometría , Humanos , TorqueRESUMEN
To compare the force application characteristics at various push frequencies of asynchronous (ASY) and synchronous (SYN) hand-rim propulsion, 8 able-bodied participants performed a separate sub-maximal exercise test on a wheelchair roller ergometer for each propulsion mode. Each test consisted of a series of 5, 4-min exercise blocks at 1.8 m · s-1 - initially at their freely chosen frequency (FCF), followed by four counter-balanced trials at 60, 80, 120 and 140% FCF. Kinetic data was obtained using a SMARTWheel, measuring forces and moments. The gross efficiency (GE) was determined as the ratio of external work done and the total energy expended. The ASY propulsion produced higher force measures for FRES, FTAN, rate of force development & FEF (P<0.05), while there was no difference in GE values (P=0.518). In pair-matched push frequencies (ASY80:SYN60, ASY100:SYN80, ASY120:SYN100 and ASY140:SYN120), ASY propulsion forces remained significantly higher (FRES, FTAN, rate of force development & FEF P<0.05), and there was no significant effect on GE (P=0.456). Both ASY and SYN propulsion demonstrate similar trends: changes in push frequency are accompanied by changes in absolute force even without changes in the gross pattern/trend of force application, FEF or GE. Matched push frequencies continue to produce significant differences in force measures but not GE. This suggests ASY propulsion is the predominant factor in force application differences. The ASY would appear to offer a kinetic disadvantage to SYN propulsion and no physiological advantage under current testing conditions.
Asunto(s)
Brazo/fisiología , Eficiencia/fisiología , Esfuerzo Físico/fisiología , Silla de Ruedas , Adulto , Fenómenos Biomecánicos , Metabolismo Energético/fisiología , Mano/fisiología , Frecuencia Cardíaca , Humanos , Masculino , Respiración , Análisis y Desempeño de Tareas , Adulto JovenRESUMEN
The purpose of this study was to compare court-movement variables and physiological responses to wheelchair tennis match-play when using low vs. standard compression tennis balls. Eleven wheelchair basketball players were monitored during repeated bouts of tennis (20 min) using both ball types. Graded and peak exercise tests were completed. For match-play, a data logger was used to record distance and speed. Individual linear heart rate oxygen consumption relationships were used to estimate match-play oxygen uptake. Significant main effects for ball type revealed that total distance (P<0.05), forward distance (P<0.05), and average speed (P<0.05) were higher for play using a low-compression ball. A lower percentage of total time was spent stationary (P<0.001), with significantly more time spent at speeds of 1-1.49 (P<0.05), 1.5-1.99 (P<0.05) and 2.0-2.49 (P<0.05) m â sec(-1) when using the low-compression ball. Main effects for physiological variables were not significant. Greater total and forward distance, and higher average speeds are achieved using a low-compression ball. The absence of any difference in measured HR and estimated physiological responses would indicate that players move further and faster at no additional mean physiological cost. This type of ball will be useful for novice players in the early phases of skill development.
Asunto(s)
Rendimiento Atlético/fisiología , Equipo Deportivo , Tenis/fisiología , Silla de Ruedas , Adolescente , Adulto , Metabolismo Energético/fisiología , Femenino , Frecuencia Cardíaca/fisiología , Humanos , Masculino , Movimiento/fisiología , Consumo de Oxígeno/fisiología , Análisis y Desempeño de Tareas , Adulto JovenRESUMEN
To determine the effects of push frequency changes on force application, fraction of effective force (FEF) and gross efficiency (GE) during hand-rim propulsion. 8 male able-bodied participants performed five 4-min sub-maximal exercise bouts at 1.8 ms(-1); the freely chosen frequency (FCF), followed by 4 counter-balanced trials at 60, 80, 120 and 140% FCF. Kinetic data was obtained using a SMART(Wheel), measuring forces and moments. The GE was determined as the ratio of external work done and the total energy expended. Increased push frequency led to reductions in peak resultant force (P<0.05), ranging from 167 to 117 N and peak tangential force (P<0.05), ranging from 117 to 77 N. However, FEF only demonstrated a significant difference between 60% and 140% FCF (69 ± 9% and 63 ± 7, respectively; P<0.05). Work per cycle decreased significantly (P<0.05) and rate of force development increased significantly (P<0.05) with increased push frequency. GE values were significantly lower at 60%, 120% and 140% FCF than 80% and 100% FCF (P<0.05). No meaningful associations were present between FEF and GE. Under the current testing conditions, changes in push frequency are accompanied with changes in the absolute force values, albeit without changes in either the gross pattern/trend of force application or FEF. Changes in GE are not explained by different levels of force effectiveness.
Asunto(s)
Eficiencia , Mano/fisiología , Locomoción/fisiología , Esfuerzo Físico/fisiología , Silla de Ruedas , Adulto , Fenómenos Biomecánicos , Ergometría , Humanos , MasculinoRESUMEN
The purpose of the current study was to investigate the effects of different wheel sizes, with fixed gear ratios, on maximal effort mobility performance in wheelchair athletes. 13 highly trained wheelchair basketball players, grouped by classification level, performed a battery of 3 field tests in an adjustable wheelchair with 3 different wheel sizes (0.59 m, 0.61 m and 0.65 m). Performance was assessed using the time taken to perform drills, with velocity and acceleration data also collected via a wheelchair velocometer. 20 m sprint time improved in the 0.65 m condition (5.58 ± 0.43 s, P=0.029) compared with 0.59 m (5.72 ± 0.40 s). Acceleration performance over the first 2 (P=0.299) and 3 (P=0.145) pushes was not statistically influenced by wheel size. However, the peak velocities reached were greater in the 0.65 m condition (4.77 ± 0.46 m â s(-1), P=0.078, Effect Size [ES]=0.63) compared with 0.59 m (4.61 ± 0.40 m â s(-1)). Impact velocity, calculated as the change in velocity from the onset of a push to the following impact peak, to define coupling performance, was also significantly improved in 0.65 m wheels (0.14 ± 0.14 m â s(-1), P=0.006) than 0.59 m wheels (0.05 ± 0.10 m â s(-1)). The time taken to complete the linear mobility (P=0.630) and the agility drill (P=0.505) were not affected by wheel size. Finally, no significant interactions existed between wheel size, classification and any performance measure. To conclude, larger 0.65 m wheels improved the maximal sprinting performance of highly trained wheelchair basketball players, without any negative effects on acceleration or manoeuvrability. Improvements in sprinting were attributed to a combination of the reduced drag forces experienced and improvements in coupling thought to be due to the lower angular velocities of the wheel/hand-rim when developing high wheelchair velocities in larger wheels.
Asunto(s)
Atletas , Rendimiento Atlético , Baloncesto/fisiología , Movimiento , Silla de Ruedas , Aceleración , Adolescente , Adulto , Prueba de Esfuerzo , Femenino , Humanos , Masculino , Adulto JovenRESUMEN
The purpose of this study was to analyse adaptations in propulsion technique and gross efficiency in novice able-bodied subjects during the initial phase of learning hand-rim wheelchair propulsion to music. 22 able bodied participants performed wheelchair propulsion (1.1 m·s(-1)) followed by a VO(2) peak test on a wheelchair ergometer. Push frequency, gross efficiency (GE), heart rate, rating of perceived exertion and propulsion technique variables (force application and temporal characteristics) were recorded. Participants were then assigned to a 3-wk practice period listening to i) 125 beats·min(-1) tempo music (LOW); ii) 170 beats·min(-1) tempo music (HIGH); or iii) a control group (CON). Following practice, all participants repeated the pre-testing protocol whilst force application data was collected in practice trials 1 and 9. After accounting for the pre-practice differences in GE (using ANCOVA), GE was higher in LOW compared with CON (P=0.038; 6.6 vs. 6.1% respectively). The differences between CON vs. HIGH and LOW vs. HIGH (P=0.830; P=0.188) were trivial suggesting that only LOW experienced an increase in GE. Practice had a favourable effect on the perceptions of effort, work per cycle, push and cycle time in contrast to the CON group. The use of music in a rehabilitation setting warrants further investigation.
Asunto(s)
Deambulación Dependiente/fisiología , Musicoterapia/métodos , Silla de Ruedas , Ejercicio Físico/fisiología , Prueba de Esfuerzo , Frecuencia Cardíaca , Humanos , Cinética , Consumo de Oxígeno , Esfuerzo Físico , Aptitud Física , Ventilación Pulmonar , Rehabilitación , Adulto JovenRESUMEN
To further understand the possible underlying mechanisms of the low efficiencies in hand rim wheelchair propulsion, this study examined efficiency indices at different arm frequencies during two propulsion modes (synchronous and asynchronous). Fourteen male able-bodied participants performed VO2PEAK tests for both propulsion modes. Subsequently two sub-maximal exercise tests examining synchronous and asynchronous propulsion were completed at an individualised velocity (60% of VO2PEAK). The freely chosen arm frequency (FCF), followed by four counter-balanced trials at 60, 80, 120, and 140% of FCF were performed. Gross, net, and work efficiency were determined. Gross efficiency was significantly lower (p<0.05) at arm frequencies >100%, and participants were more efficient between 60 to 100% FCF. These arm frequencies corresponded to 76+/-22 to 126+/-36 and 70+/-18 to 116+/-30 pushes x min(-1) (synchronous and asynchronous respectively). Trends in VO2, gross and work efficiency suggest that 80% of FCF produced the best economy and efficiency during both propulsion modes (non-significant). Gross and work efficiency at 80% FCF were 6.8+/-0.7% and 13.0+/-4.6% for synchronous and 7.0+/-0.8% and 11.5+/-1.6% for asynchronous respectively. The results suggest that during both modes of propulsion the FCF is not necessarily the most efficient.
Asunto(s)
Consumo de Oxígeno/fisiología , Esfuerzo Físico/fisiología , Silla de Ruedas , Adolescente , Brazo/fisiología , Eficiencia/fisiología , Prueba de Esfuerzo , Humanos , Masculino , Adulto JovenRESUMEN
The purpose of this study was to determine the contributions of arm frequency and propulsion mode on the internal work during submaximal wheelchair propulsion. Twelve able-bodied participants performed a V.O (2) peak test on a wheelchair ergometer. On a separate occasion, six (4 min) submaximal exercise conditions employing two modes of propulsion (synchronous, SYN vs. asynchronous, ASY) at arm frequencies of 40 and 80 rev . min (-1) were performed at 1.2 m . s (-1) and 1.7 m . s (-1). These conditions resulted in three push strategy combinations (ASY [20 : 20], SYN [40 : 40] & ASY [40 : 40]) at two speeds. Gross, net, work and delta efficiency were determined. The cost of unloaded exercise was significantly lower for the ASY [20 : 20] than both ASY and SYN [40 : 40] (0.49 vs. 0.58 and 0.57 L . min (-1), respectively). All the efficiency indices decreased as velocity increased (p < 0.01). ASY [20 : 20] was the least efficient (gross and work) mode (4.2 +/- 0.4 % and 6.2 +/- 0.8 % respectively). Comparison of equal arm frequencies (ASY [40 : 40] vs. SYN [40 : 40]); found the efficiency to be lower for ASY propulsion (p < 0.05). Under the current testing conditions SYN propulsion mode offers greater efficiency during wheelchair propulsion.