RESUMEN
Adenoviruses are well-known viral vectors that have been previously used in gene therapy and as a vaccine-delivery vehicle for humans and animals. During the COVID-19 pandemic, it gained renewed attention, but at the same time, it raised concerns due to side effects observed with some of the resulting vaccines administered to patients. It has been indicated that these side effects might be attributed to impurities present in the final product. Therefore, constant enhancement of the vaccine purity and further improvement of impurity detection methods are needed. In this work, we showcase an example of industry-relevant adenovirus bioprocess optimization. Our data show the effect of upstream parameters on the bioburden introduced to the downstream process. We provide an example of process optimization using a combination of the PATfix analytical method, ddPCR, infectivity, total DNA, and total protein analyses to optimize cell density, multiplicity of infection, and length of production. Additionally, we provide data illustrating the robustness of the convective interaction media quaternary amine monolithic chromatography step. This anion exchange strategy was shown to remove over 99% of protein and DNA impurities, including those unable to be addressed by tangential flow filtration, while maintaining high adenovirus recoveries.
Asunto(s)
Adenoviridae , Vacunas , Animales , Humanos , Pandemias , Cromatografía por Intercambio Iónico/métodos , ADNRESUMEN
Adeno-associated virus (AAV) vectors are crucial tools for gene therapy applications. As AAVs are administered in vivo, stringent purity requirements must be met, necessitating the development of various downstream processing strategies in accordance with regulatory guidelines. In this context, we focus on the non-affinity serotype-independent recombinant AAV (rAAV) capture step, which involves the use of Convective Interaction Media (CIM) cation-exchange SO3 monoliths. We analyzed differentially pretreated viral samples obtained from the Sf9 cell line and applied these samples to the capture SO3 chromatography step. We conducted screening experiments using CIM SO3 0.05 mL monolithic 96-well plates with buffers of varying pH, sodium chloride concentrations, and the inclusion of poloxamer 188, aiming to select the optimal binding mobile phase. Dynamic binding capacity was defined for different pretreatments and the optimal conditions were subsequently retested using the industrial purification CIMmultus line. The results demonstrated a high overall vector recovery (51%) and a significant reduction in impurities (99.98% for protein reduction and 99.25% for DNA reduction) using the selected capture step parameters, thereby confirming the successful optimization of the rAAV capture step in the downstream process using monoliths.
Asunto(s)
ADN , Cloruro de Sodio , Cromatografía por Intercambio Iónico/métodos , Línea CelularRESUMEN
Preferential exclusion chromatography (PXC) sometimes described as hydrophobic interaction chromatography is a well-known, but not widely used technique for purification of Adeno-associated viruses. It employs high molarity of preferentially excluded cosolvent (salt in our case). The downside of this method is that high molarity of salt can lead to aggregation and precipitation of different compounds from the sample. In the case of viruses that are excreted to medium, the concentration of impurities is much lower compared to cell lysates, and PXC can be used as a first chromatographic, serotype independent step to concentrate and purify adeno-associated virus (AAV). Here, we explored PXC for adherent and suspension harvests using monolithic chromatographic columns (CIMmultus). Suspension extracellular adeno-associated virus, serotype 9 (AAV9) harvest had more impurities compared to adherent harvest, therefore it required higher input regarding method development. Final conditions for suspension harvest included higher molarity of binding salt and using more open channel format of chromatographic column (6 µm channel size). Vector genome analysis with droplet digital polymerase chain reaction (ddPCR) revealed 84% and 97% recovery for suspension and adherent AAV9 harvest, respectively. After PXC capture step, adherent AAV9 was purified by already described ion exchange techniques. Overall process vector genome recovery, from clarified harvest to anion exchange elution fraction, was 54% measured by ddPCR. Residual host cell DNA was measured at 40 ng per 1E13 vector genome, and empty AAV was below 5% in final anion exchange chromatography fraction.
Asunto(s)
Dependovirus , Vectores Genéticos , Cromatografía por Intercambio Iónico/métodos , Dependovirus/genética , Cromatografía en Gel , AnionesRESUMEN
Bacteriophages represent immense potential as therapeutic agents. Many of the most compelling applications of bacteriophages involve human therapy, some pertinent to gene therapy, others involving antibiotic replacement. Phages themselves are considered safe for humans. However, phage lysates may contain many kinds of harmful by-products, especially endotoxins of gram-negative bacteria and protein toxins produced by many pathogenic bacterial species. In bacteriophage research and therapy, most applications ask for highly purified phage suspensions, as such it is crucial to reduce proteins, endotoxins, DNA and other contaminants. In this article we present an efficient two-step chromatographic purification method for P. aeruginosa bacteriophage PP-01, using Convective Interaction Media (CIM®) monoliths, that is cGMP compliant and easy to scale-up for most stringent production of the therapeutic phage. First chromatographic step on CIMmultus OH resulted in 100% bacteriophage recovery with a reduction of 98 % protein and more than 99 % DNA content. Polishing was conducted using three different column options, CIMmultus with QA, H-Bond and PrimaS ligands. For PP-01 bacteriophage all three different options worked, but multimodal ligands H-Bond and PrimaS outperformed traditional QA in endotoxin removal (7 log step reduction). Additionally, an HPLC analytical method was developed to estimate phage concentration and impurity profile in different in-process samples. The HPLC method shows good correlation with drop assay titration, provides useful insights and can be run very fast with just 20 min per sample analysis.
Asunto(s)
Bacteriófagos , Humanos , Endotoxinas , Ligandos , Cromatografía/métodos , BacteriasRESUMEN
Separation of empty and full adeno-associated virus capsids by multimodal metal affinity chromatography was investigated using a positively charged metal affinity ligand. A subpopulation of empty capsids eluted first, followed by full capsids, and later by more empty capsids and debris. Empty and full capsid composition of chromatography fractions was evaluated by cesium chloride density gradient centrifugation followed by stratigraphic flow analysis of the centrifuge tube contents, monitored by intrinsic fluorescence. Columns charged with barium, calcium, magnesium, zinc, manganese, and ferric ions gave similar results with respect to capsid separation. Charging with cupric ions maintained resolution between early-eluting empty capsids and full capsids but caused them to elute at lower conductivity. Empty and full capsids were fractionated with Tris-borate gradients, sodium chloride gradients, and magnesium chloride gradients. Recovery of full serotype 9 capsids was 100% with complete elimination of empty capsids. All metal ions bound contaminant subsets that required sodium hydroxide for removal. Columns charged with ferric iron and manganese bound more contaminants than all other metals. Columns charged with calcium, magnesium, barium, and copper bound the least. Contaminant binding on zinc-charged columns was intermediate between the two groups.
Asunto(s)
Cápside , Cromatografía de Afinidad/métodos , Dependovirus , Centrifugación por Gradiente de Densidad , Cesio , ClorurosRESUMEN
HPLC is established as a fast convenient analytical technology for characterizing the content of empty and full capsids in purified samples containing adeno-associated virus (AAV). UV-based monitoring unfortunately over-estimates the proportion of full capsids and offers little value for characterizing unpurified samples. The present study combines dual-wavelength UV monitoring with intrinsic fluorescence, extrinsic fluorescence, and light-scattering to extend the utility of HPLC for supporting development of therapeutic AAV-based drugs. Applications with anion exchange (AEC), cation exchange (CEC), and size exclusion chromatography (SEC) are presented. Intrinsic fluorescence increases sensitivity of AAV detection over UV and enables more objective estimation of empty and full capsid ratios by comparison of their respective peak areas. Light scattering enables identification of AAV capsids in complex samples, plus semiquantitative estimation of empty and full capsid ratios from relative peak areas of empty and full capsids. Extrinsic Picogreen fluorescence enables semiquantitative tracking of DNA with all HPLC methods at all stages of purification. It does not detect encapsidated DNA but reveals DNA associated principally with the exteriors of empty capsids. It also enables monitoring of host DNA contamination across chromatograms. These enhancements support many opportunities to improve characterization of raw materials and process intermediates, to accelerate process development, provide rapid in-process monitoring, and support process validation.
RESUMEN
One of the main challenges in the gene therapy viral vector development is to establish an optimized process for its large scale production. This requires optimization for upstream and downstream processes as well as methods that enable the step-by step analytical characterization of the virus, the results of which inform the iterative refinement of production for yield, purity and potency. The biggest problem here is a plethora of viral vector formulations, many of which interfere with analytical techniques. We took adeno-associated virus (AAV) as an example and showed benefits of combined use of molecular methods and transmission electron microscopy (TEM) for viral vectors' characterization and quantification. Results of the analyses showed that droplet digital PCR (ddPCR) performs better than quantitative real-time PCR (qPCR), in terms of robustness and assay variance, and this was especially relevant for partially purified (in-process) samples. Moreover, we demonstrate the importance of sample preparation prior to PCR analysis. We evaluated viral structure, presence of aggregates and impurities with TEM analysis and found that these impacted the differences in viral titers observed by qPCR and ddPCR and could be altered by sample preparation. These results serve as a guide for the establishment of the analytical methods required to provide measures of identity and purity for AAV viral vectors.