RESUMEN
Two-dimensional liquid chromatography (2D-LC) has gained increased attention because of its high peak capacity for separating complex samples. However, preparative 2D-LC aimed at isolating compounds is significantly different compared with one-dimensional liquid chromatography (1D-LC) in terms of method development and system configuration; thus, it is less developed than its analytical counterpart. The use of 2D-LC in large-scale product preparation has rarely been reported. Hence, a preparative 2D-LC system was developed in this study. The system was composed of one set of preparative LC modules as a separation system, with a dilution pump, switch valves, and trap column array as the interface, to enable the simultaneous isolation of several compounds. Tobacco was used as a sample, and the developed system was applied to isolate nicotine, chlorogenic acid, rutin, and solanesol. The chromatographic conditions were developed by investigating the trapping efficiency of different types of trap column packings, and chromatographic behaviors under different overload conditions. The four compounds were isolated in one 2D-LC run with high purity. The developed system features low cost because it employs medium-pressure isolation, excellent automation owing to its use of an online column switch, high stability, and capability for large-scale production. The isolation of chemicals from tobacco leaves as pharmaceutical raw materials could aid in the development of the tobacco industry and promote the local agricultural economy.
Asunto(s)
Ácido Clorogénico , Nicotiana , Cromatografía Liquida , Nicotina , Hojas de la PlantaRESUMEN
Polysaccharide from traditional Chinese herb, Saposhnikovia divaricata (Turcz.) Schischk. (SD) was extracted, fractionated and characterized in this work. Four fractions were prepared. Their molecular weight, monosaccharide compositions, linkage modes and structural properties were characterized with SEC-MALS-RI, HPAEC-PAD, GC-MS and NMR. SDP1 was assigned as a 1, 4-α-glucan with small amount of O-6 linked branches. SDP2 contained a big amount of the 1, 4-α-glucan and a small amount of arabinogalactan, while SDP3 possessed relatively lower amount of the 1, 4-α-glucan and a big amount of the arabinogalactan. SDP4 was defined as a pectic arabinogalactan. Four fractions showed antioxidant activities in both molecular and cellular levels and their activity was ranked as SDP4 ≈ SDP3>SDP2>SDP1. The 1, 4-α-glucan in SDP1 had the weakest, while SDP3 and SDP4 showed similar and the highest antioxidant activity. The arabinogalactan was the major component of both SDP3 and SDP4, which significantly contributed to the antioxidant activity of SDP.
Asunto(s)
Antioxidantes/química , Antioxidantes/aislamiento & purificación , Apiaceae/química , Medicamentos Herbarios Chinos/química , Medicamentos Herbarios Chinos/aislamiento & purificación , Polisacáridos/química , Polisacáridos/aislamiento & purificación , Animales , Antioxidantes/farmacología , Supervivencia Celular/efectos de los fármacos , Medicamentos Herbarios Chinos/farmacología , Macrófagos/citología , Macrófagos/efectos de los fármacos , Ratones , Raíces de Plantas/química , Polisacáridos/farmacología , Células RAW 264.7RESUMEN
Although the coupling of GC/MS with atmospheric pressure ionization (API) has been reported in 1970s, the interest in coupling GC with atmospheric pressure ion source was expanded in the last decade. The demand of a "soft" ion source for preserving highly diagnostic molecular ion is desirable, as compared to the "hard" ionization technique such as electron ionization (EI) in traditional GC/MS, which fragments the molecule in an extensive way. These API sources include atmospheric pressure chemical ionization (APCI), atmospheric pressure photoionization (APPI), atmospheric pressure laser ionization (APLI), electrospray ionization (ESI) and low temperature plasma (LTP). This review discusses the advantages and drawbacks of this analytical platform. After an introduction in atmospheric pressure ionization the review gives an overview about the history and explains the mechanisms of various atmospheric pressure ionization techniques used in combination with GC such as APCI, APPI, APLI, ESI and LTP. Also new developments made in ion source geometry, ion source miniaturization and multipurpose ion source constructions are discussed and a comparison between GC-FID, GC-EI-MS and GC-API-MS shows the advantages and drawbacks of these techniques. The review ends with an overview of applications realized with GC-API-MS.