RESUMEN
Surface-initiated iron(0)-mediated controlled radical polymerization (SI-Fe0CRP) with low toxicity and excellent biocompatibility is promising for the fabrication of biofunctional polymer coatings. However, the development of Fe(0)-based catalysts remains limited by the lower dissociation activity of the Fe(0) surface in comparison to Cu(0). Here, we found that, by simply polishing the Fe(0) plate surface with sandpaper, the poly(methacryloyloxy)ethyl trimethylammonium chloride brush growth rate has been increased significantly to 3.3 from 0.14 nm min-1 of the pristine Fe(0) plate. The excellent controllability of roughness-mediated SI-Fe0CRP can be demonstrated by customizing multicompartment brushes and triblock brushes. Furthermore, we found that the resulting polymer brush coatings exhibit remarkably low water adhesion (0.097 mN) and an outstanding drag reduction rate of 52% in water. This work provides a promising strategy for regulating the grafting rate of polymer brushes via SI-Fe0CRP for biocompatible marine drag reduction coatings.
RESUMEN
Imine-linked covalent organic frameworks (COFs) usually show high crystallinity and porosity, while vinyl-linked COFs have excellent semiconducting properties and stability. Therefore, achieving the advantages of imine- and vinyl-linkages in a single COF material is highly interesting but remains challenging. Herein, we demonstrate the fabrication of a layer-blocked COF (LB-COF) heterogeneous film that is composed of imine- and vinyl-linkages through two successive surface-initiated polycondensations. In brief, the bottom layer of imine-linked COF film was constructed on an amino-functionalized substrate via Schiff-base polycondensation, in which the unreacted aldehyde edges could be utilized for initiating aldol polycondensation to prepare the second layer of vinyl-linked COF film. The resultant LB-COF film displays excellent ordering due to the crystalline templating effect from the bottom imine-linked COF layer; meanwhile, the upper vinyl-linked COF layer could strongly enhance its stability and photocatalytic properties. The LB COF also presents superior performance in photocatalytic uranium extraction (320 mg g-1), which is higher than the imine-linked (35 mg g-1) and the vinyl-linked (295 mg g-1) counterpart. This study provides a novel surface-initiated strategy to synthesize layer-blocked COF heterogeneous films that combine the advantages of each building block.
RESUMEN
Ice is omnipresent in our daily life and possesses intrinsic slipperiness as a result of the formation of a quasi-liquid layer. Thus, the functional surfaces inspired by ice show great prospects in widespread fields from surface lubrication to antifouling coatings. Herein, we report an ice-inspired polymeric slippery surface (II-PSS) constructed by a self-lubricating liquid layer and a densely surface-grafted polymer brush. The polymer brush layer could act as a homogeneous matrix to capture lubricant molecules via strong and dynamic dipole-dipole interactions to form a stable quasi-liquid layer that resembles the ice surface. The II-PSS can be easily fabricated on various solid substrates (e.g., silicon, glass, aluminum oxide, plastics, etc.) with excellent smoothness (roughness of â¼0.4 nm), optical transmittance (â¼94.5%), as well as repellence toward diverse liquids with different surface tensions (22.3-72.8 mN m-1), pH values (1-14), salinity, and organic pollutants. Further investigation shows that the II-PSS exhibits extremely low attachment for proteins and marine organisms (e.g., algae and mussels) for over one month. These results demonstrate a robust and promising strategy for high-performance antifouling coatings.
RESUMEN
BACKGROUND: This study aimed to compare the expression of microRNA (miR)-181a and phosphatase and tensin homolog (PTEN) in hypertrophic scar tissue and cells and to explore the effects of miR-181a and PTEN on the proliferation and apoptosis of the human scar fibroblast cell line HSFb. METHODS: HSFb cells were transfected with miR-negative control (miR-NC), miR-181a mimics, miR-181a inhibitor, pcDNA3.1-PTEN (pc-PTEN), or small interfence-PTEN (si-PTEN) plasmid using a Lipofectamine 2000 transfection kit. The effects of miR-181a and PTEN on the proliferation and apoptosis of HSFb were determined using a Cell Counting Kit (CCK)-8 experiment and flow cytometry, respectively. The effects of miR-181a and PTEN on the expression of apoptosis-related proteins in HSFb, including type I collagen (Col-1) and type III collagen (Col-3), were measured by western blot. Finally, the relationship between miR-181a and PTEN was explored by the dual-luciferase reporter gene experiment. RESULTS: The miR-181a in hypertrophic scar tissues and HSFb were significantly up-regulated compared to embryo skin fibroblast (ESF-1) cells and normal tissues (P<0.05), whereas the opposite results were seen for PTEN expression (P<0.05). Inhibiting miR-181a or upregulating the expression of PTEN significantly suppressed the proliferation of HSFb (P<0.05) and induced their apoptosis (P<0.05). Western blot revealed that inhibiting and upregulating miR-181a and PTEN, respectively, decreased the expression of the B-cell lymphoma-2 (Bcl-2), Col-1, and Col-3 proteins in HSFb, but significantly up-regulated the expression of Bcl-2-associated X protein (Bax), cleaved caspase-3 (c-caspase-3), and cleaved caspase-9 (c-caspase-9) (P<0.05). The dual-luciferase reporter gene experiment results confirmed PTEN to be the downstream target gene of miR-181a. Simultaneous upregulation of miR-181a and PTEN expression had no significant effect on the proliferation and apoptosis of HSFb. CONCLUSIONS: miR-181a promotes the up-regulation of Col-1 and Col-3, and regulates the proliferation and apoptosis of HSFb by targeting PTEN, thereby enhancing the formation of hypertrophic scarring (HS). Therefore, miR-181a and PTEN may be potential therapeutic targets for the treatment of HS.
Asunto(s)
Cicatriz Hipertrófica , MicroARNs , Apoptosis/genética , Proliferación Celular/genética , Cicatriz Hipertrófica/genética , Fibroblastos , Humanos , MicroARNs/genética , TensinasRESUMEN
A diffusion-reaction coupled model was presented to investigate the effects of multiscale pore structure characteristics on gas sensing properties. A series of CoTiO3 powders with different pore size distributions were fabricated by sol-gel method. Experimental results on cobalt titanate thick films show that a well-defined multiscale pore structure is particularly desired for the improvement of sensing performance, instead of just increasing the specific surface area. The theoretical responses of sensing elements with different pore size distributions were derived and compared with experimental data on CoTiO3 sensors exposed to ethanol. The calculated sensitivities considering the influence of pore size changes were also found to be in agreement with the experimental results. A dimensionless Thiele modulus Th was introduced for assessing the critical point corresponding to the transformation from surface reaction-controlled sensitivity into diffusion-controlled sensitivity.
RESUMEN
In yeast, the interaction of General Control Non-derepressible 1 (GCN1) with GCN2 enables GCN2 to phosphorylate eIF2α (the alpha subunit of eukaryotic translation initiation factor 2) under a variety of stresses. Here, we cloned AtGCN1, an Arabidopsis homologue of GCN1. We show that AtGCN1 directly interacts with GCN2 and is essential for the phosphorylation of eIF2α under salicylic acid (SA), ultraviolet (UV), cold stress and amino acid deprivation conditions. Two mutant alleles, atgcn1-1 and atgcn1-2, which are defective in the phosphorylation of eIF2α, showed increased sensitivity to cold stress, compared with the wild type. Ribosome-bound RNA profiles showed that the translational state of mRNA was higher in atgcn1-1 than in the wild type. Our result also showed that cold treatment reduced the tendency of the tor mutant seedlings to produce purple hypocotyls. In addition, the kinase activity of TOR was transiently inhibited when plants were exposed to cold stress, suggesting that the inhibition of TOR is another pathway important for plants to respond to cold stress. In conclusion, our results indicate that the AtGCN1-mediated phosphorylation of eIF2α, which is required for inhibiting the initiation of protein translation, is essential for cold tolerance in Arabidopsis.
Asunto(s)
Adaptación Fisiológica , Proteínas de Arabidopsis/metabolismo , Arabidopsis/fisiología , Frío , Biosíntesis de Proteínas , Adaptación Fisiológica/efectos de los fármacos , Arabidopsis/efectos de los fármacos , Arabidopsis/genética , Secuencia de Bases , Clonación Molecular , Factor 2 Eucariótico de Iniciación/metabolismo , Regulación de la Expresión Génica de las Plantas/efectos de los fármacos , Herbicidas/toxicidad , Modelos Biológicos , Fosforilación/efectos de los fármacos , Unión Proteica/efectos de los fármacos , Biosíntesis de Proteínas/efectos de los fármacos , Proteínas Quinasas/metabolismo , ARN Mensajero/genética , ARN Mensajero/metabolismo , Ribosomas/efectos de los fármacos , Ribosomas/metabolismo , Estrés Fisiológico/efectos de los fármacos , Sulfonamidas/toxicidad , Triazinas/toxicidadRESUMEN
Kernel development is an important dynamic trait that determines the final grain yield in maize. To dissect the genetic basis of maize kernel development process, a conditional quantitative trait locus (QTL) analysis was conducted using an immortalized F2 (IF2) population comprising 243 single crosses at two locations over 2 years. Volume (KV) and density (KD) of dried developing kernels, together with kernel weight (KW) at different developmental stages, were used to describe dynamic changes during kernel development. Phenotypic analysis revealed that final KW and KD were determined at DAP22 and KV at DAP29. Unconditional QTL mapping for KW, KV and KD uncovered 97 QTLs at different kernel development stages, of which qKW6b, qKW7a, qKW7b, qKW10b, qKW10c, qKV10a, qKV10b and qKV7 were identified under multiple kernel developmental stages and environments. Among the 26 QTLs detected by conditional QTL mapping, conqKW7a, conqKV7a, conqKV10a, conqKD2, conqKD7 and conqKD8a were conserved between the two mapping methodologies. Furthermore, most of these QTLs were consistent with QTLs and genes for kernel development/grain filling reported in previous studies. These QTLs probably contain major genes associated with the kernel development process, and can be used to improve grain yield and quality through marker-assisted selection.