Lacticaseibacillus paracasei completely utilizes fructooligosacchrides in the human gut through ß-fructosidase (FosE).

The fecal microbiota of two healthy adults was cultivated in a medium containing commercial fructooligosaccharides [FOS; 1-kestose (GF2), nystose (GF3), and 1F-fructofuranosylnystose (GF4)]. Initially, the proportions of lactobacilli in the two feces samples were only 0.42% and 0.17%; however, they significantly increased to 7.2% and 4.8%, respectively, after cultivation on FOS. Most FOS-utilizing isolates could utilize only GF2; however, Lacticaseibacillus paracasei strain Lp02 could fully consume GF3 and GF4 too. The FOS operon (fosRABCDXE) was present in Lc. paracasei Lp02 and another Lc. paracasei strain, KCTC 3510T, but fosE was only partially present in the non-FOS-degrading strain KCTC 3510T. In addition, the top six upregulated genes in the presence of FOS were fosABCDXE, particularly fosE. FosE is a ß-fructosidase that hydrolyzes both sucrose and all three FOS. Finally, a genome-based analysis suggested that fosE is mainly observed in Lc. paracasei, and only 13.5% (61/452) of their reported genomes were confirmed to include it. In conclusion, FosE allows the utilization of FOS, including GF3 and GF4 as well as GF2, by some Lc. paracasei strains, suggesting that this species plays a pivotal role in FOS utilization in the human gut.

Development of nationally representative exposure factor database for children's products in Korea.

BACKGROUND: Children may be exposed to harmful chemicals from their products. Accurate exposure factors are critical for exposure assessment of children's products. Product usage pattern parameters are relatively limited compared with the chemical concentration, children's physiological and behavioral parameters. OBJECTIVE: The aim of this study was to determine nationally representative Korean exposure factors for the usage patterns of children's products by sex, age, and season. METHODS: Using proportional quota sampling, a survey of 10,000 households with children aged 0-12 years was conducted twice, once in summer and winter. The children's ages were divided into four groups: infant (0-2 years old), toddler (3-6), lower-grade elementary student (7-9), and higher-grade elementary student (10-12). Data on exposure factors such as use rate, use frequency, and use duration of 57 children's products were collected. RESULTS: The 57 products were classified into five categories: baby products (13), toys (12), daily products (10), sporting goods (8), and stationery (14). The use rates of products in the daily products and stationery category were >90% in both seasons. Two of the 57 products showed significant sex differences in all three exposure factors (p < 0.001). Twenty-five of the 44 non-baby products showed significant age differences for all three exposure factors. Twenty-three of the 57 products varied significantly with season for all three exposure factors. IMPACT: This study generated a nationally representative exposure factor database for the usage patterns of children's products in Korea. The exposure factors for 57 children's products were investigated through twice survey with quota sampling with each 10,000 children nationwide. Sex, age, and seasonal differences for children's products were identified. These accurate exposure factors by sex, age, and season can be used as input parameters for refined exposure assessment.

The antibacterial activity of mineral trioxide aggregate containing calcium fluoride.

Background/purpose: Because complete microbial elimination of the infected root canal system is nearly impossible to achieve, the use of root canal fillings with antibacterial effects may help to minimize intracanal infections. Our previous study, MTA modified by CaF2 addition, improved the biocompatibility and mineralization potential of human dental pulp cells without adverse effect on the physical properties. In this study, the antibacterial effect of MTA after CaF2 addition was evaluated for use as a root canal sealer. The objective of this study was to evaluate the antibacterial activity of MTA after the addition of CaF2. Materials and methods: The antibacterial activities of MTA and MTA-CaF2 mixture against Enterococcus faecalis (E. faecalis), Porphyromonas endodontalis (P. endodontalis), and Porphyromonas gingivalis (P. gingivalis) were investigated with MTA-CaF2 powder and eluates. The bacterial growth was measured by optical density using a spectrophotometer and the bacterial colony counting. Results: MTA inhibited the growth of E. faecalis, P. endodontalis, and P. gingivalis, and the addition of CaF2 improved this antibacterial effect in a concentration dependent manner (p < 0.05). E. faecalis was more resistant to MTA-CaF2 than the other groups of bacteria. Conclusion: The addition of more than 5% CaF2 to MTA can increase the antibacterial activity.

Estimation of multi-route exposures to various chemicals during Children's clay toy use.

Clay toys have been used as play materials and educational tools for children. Clay toys exhibit adherent properties, and may facilitate chemical ingestion via dermal absorption and oral (hand-to-mouth, HTM) exposures. Inhalation exposure also be considered when contain volatile chemicals. The purpose of this study was to estimate the exposure dose for chemicals in clay toys via three exposure routes, and to evaluate the relationship between the exposure contribution of each route considering both the chemical properties and children's age. Chemical analysis was conducted for 9 semi-volatile organic compounds (SVOCs), 17 volatile organic compounds (VOCs), and 7 metal elements in clay toys (n = 66) purchased from Korean market. Exposure factors for usage pattern of clay toys were conducted based on a nationally representative survey in Korea. A total of 12,144 (60.7%) children responded positively to playing with clay toys. Exposure to SVOCs and VOCs in clay toys via HTM, inhalation, and dermal absorption were estimated. The exposure level was the highest in styrene with 5.2 × 10-3 mg/kg-bw/day (95th percentile population), which was approximately 13% of the acceptable daily dose for styrene. In 3-year-old children, dermal absorption route contributed the highest at 59.2-100%. Chemicals with higher octanol-water partition coefficient (Kow) had the greater the contribution of the dermal absorption route and the weaker the contribution of the HTM route. In infants (0-2 years), the contribution via HTM exposure was higher than that in the other age groups. The contribution of inhalation exposure differed depending on the volatility of the chemicals. Furthermore, the exposure route contribution significantly differed due to age-dependent behavioral changes in children. These results suggest that the exposure assessments for children could be considered with multiple exposure routes related to chemical properties.

Children's exposures to boron and biocides from slime products in Asian regions.

BACKGROUND: Chemical exposure from slime toys can cause potential health effects. Although slime toys are popular in Asia, the regulation of boron, chloromethylisothiazolinone (CMIT), and methylisothiazolinone (MIT) in these toys has been implemented only in Korea. OBJECTIVE: In this study, we investigated boron migration levels and CMIT and MIT concentrations in 127 slime products from Asian cities and estimated children's exposure to boron and the biocides in Korea. METHODS: Slime boron migration levels were analyzed by inductively coupled plasma optical emission spectrometry (ICP-OES), according to Part 3 of the European Standard on the safety of toys (EN 71-3:2013). CMIT and MIT concentrations were analyzed using liquid chromatography tandem mass spectrometry (LC-MS/MS). Exposure doses of boron, CMIT, and MIT were calculated using the exposure pattern of children slime users in Korea. RESULTS: Average boron migration levels of the slime products in Seoul, Bangkok, Hong Kong, Taipei, and Yokohama were 691.9, 851.1, 806.6, 509.0, and 956.2 mg/kg, respectively. Of the 127 slime products tested, 70.1% exceeded the EU boron migration limit of 300 mg/kg for toys made with sticky material. Boron migration levels in slime products in Korea did not differ significantly by manufacturing date, although the Korean boron regulations were enacted in January 2019. CMIT and MIT were detected from 51.2% and 36.2% of all products, respectively, and tended to be detected simultaneously. Exposure doses of boron, CMIT, and MIT were highest among infants. SIGNIFICANCE: Oral exposure was the most important for boron exposure. It is necessary to manage boron level in slime products and minimize exposure from hand to mouth action in infants.

The biocompatibility and mineralization potential of mineral trioxide aggregate containing calcium fluoride-An in vitro study.

BACKGROUND/PURPOSE: MTA is used to induce hard tissue regeneration in various procedures. This study evaluated the biocompatibility and mineralization potential of mineral trioxide aggregate (MTA) containing calcium fluoride (CaF2). To verify if the change of components affected physical properties, the setting time, solubility, and surface roughness were measured. MATERIALS AND METHODS: Human dental pulp cells (HDPCs) were treated with powder and set MTA containing CaF2 (0, 1, 5, and 10 wt %). The proliferation of HDPCs was investigated using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The mineralization potential of HDPCs was investigated with the relative gene expression of alkaline phosphatase (ALP), collagen type I (ColI), osteocalcin (OCN), and runt-related transcription factor 2 (Runx2) using real-time reverse transcription polymerase chain reaction (RT-PCR). For investigating the physical properties, setting time and solubility were tested. Surface profiles of material were analyzed by a non-contact surface profiler and a scanning electron microscope (SEM). RESULTS: MTA-5% CaF2 mixtures increased the proliferation and the mineralization-related gene expression of HDPCs to a greater degree than pure MTA. The addition of CaF2 to MTA delayed the setting, but the difference was only significant in the MTA-10% CaF2. Solubility and surface roughness was not altered. CONCLUSION: The addition of more than 5% CaF2 can be considered to increase the regeneration potential of pulp cells without adverse effects on physical property.

Calcium silicate-based root canal sealers: a literature review.

Epoxy resin-based sealers are currently widely used, and several studies have considered AH Plus to be the gold-standard sealer. However, it still has limitations, including possible mutagenicity, cytotoxicity, inflammatory response, and hydrophobicity. Drawing upon the advantages of mineral trioxide aggregate, calcium silicate-based sealers were introduced with high levels of biocompatibility and hydrophilicity. Because of the hydrophilic environment in root canals, water resorption and solubility of root canal sealers are important factors contributing to their stability. Sealers displaying lower microleakage and stronger push-out bond strength are also needed to endure the dynamic tooth environment. Although the physical properties of calcium silicate-based sealers meet International Organization for Standardization recommendations, and they have consistently reported to be biocompatible, they have not overcome conventional resin-based sealers in actual practice. Therefore, further studies aiming to improve the physical properties of calcium silicate-based sealers are needed.

Aggregate exposure assessment using cosmetic co-use scenarios: II. Application and validation for phthalates.

Aggregate exposure assessments using co-use scenarios could provide more realistic estimations than single product exposure assessment. Co-use scenarios for cosmetic products were determined from a ranking of the frequency of occurrence of co-use patterns and the number of cosmetics used. We conducted aggregate exposure assessments using the co-use scenarios and validated the new methodology by comparing the results to those of a receptor-based aggregate exposure assessment. The aggregate exposures of di(2-ethylhexyl)phthalate (DEHP), di-n-butyl phthalate (DnBP) and diethyl phthalate (DEP) in cosmetics were estimated by co-use scenarios for cosmetics. The co-use scenario-based AED increased with the number of cosmetics in the co-use scenarios, and was higher in female and younger groups. The major contributors in females were facial cream for DEHP, nail polish for DnBP, and shower cologne or perfume for DEP. The major contributors in males were body lotion for DEHP, facial sunscreen for DnBP, and hair styling product for DEP. The distribution of the co-use scenario based AEDs displayed a similar trend to that of the receptor-based AEDs, with the 95th percentiles of the AED slightly underestimated in the co-use scenario. The applied methodology could provide reasonable aggregate exposures with relatively few resources required.

Aggregate exposure assessment using cosmetic co-use scenarios: I. Establishment of aggregate exposure scenarios.

The "co-use" patterns of cosmetics would be critical for accurate aggregate exposure assessment. The Korean national representative exposure factor database, which includes simultaneous usage patterns of 31 cosmetics by 1001 subjects, was used to analyze the co-use patterns by Koreans. Three analytical methods were applied to determine the co-use patterns. Cohen's kappa coefficient was used to analyze the correlation between pairs. This method revealed an effect of gender on the cosmetics co-use pattern. Hierarchical clustering analysis was performed using the binary linkage distance method. The clusters were divided into one large cluster and small clusters of one or two cosmetics. Frequent pattern mining was performed using the eclat algorithm. The number of cosmetics used and co-use pattern were influenced by gender and age of the population. The co-use patterns exhibited an additive property in that new cosmetics were added to previous cosmetic combinations. A co-use scenario was proposed using the rank of occurrence frequency in co-use patterns and percentile values of the number of cosmetics used. The 16 co-use scenarios represented to the 25th, 50th, 75th, and 95th percentiles of the co-use patterns for four gender-age groups. These could be applied to aggregate exposure assessment as exposure scenarios.

Consumer exposure and risk assessment to selected chemicals of mold stain remover use in Korea.

Mold stain remover (MSR) is used to clean mold and mildew spots from surfaces and contains a variety of chemical substances. In this study, we estimated the inhalation and dermal exposures associated with the use of trigger spray MSRs, and performed screening-level risk assessments for the use of this type of product in Korea. Inhalation and dermal exposures were estimated using exposure algorithms based on exposure factors obtained from a nationwide survey of 10,000 participants and chemical analyses of the four most popular trigger spray MSRs. The hazard quotients (HQs) for noncancer risk and excess cancer risk (ECR) were calculated for each chemical. The mean inhalation exposure estimates for formaldehyde, benzene, chloroform, and carbon tetrachloride were 6.9 × 10-7, 1.7 × 10-7, 5.4 × 10-6, and 2.7 × 10-5 mg/kg/day, respectively. Dermal exposures of the chemicals were 5.7-6.5 times higher than inhalation exposures. The HQs for total exposure were all below 1, which indicated little noncancer risk from the use of MSRs. The safe ECR value of 1 × 10-6, was exceed in one subject for inhalation exposure of benzene and four subjects for dermal exposure of formaldehyde, while 19.8% for dermal exposure of benzene were above this value. Therefore, use of trigger spray MSRs in Korea should require more detailed exposure and risk assessment, especially for benzene.

Characteristics of exposure factors and inhalation exposure to selected spray consumer products in Korean population.

Many consumer spray products are sold for various purposes. Use of spray products can cause adverse health effects. This study evaluated exposure factors for consumer spray products and assessed the particle inhalation exposure. Six consumer spray products were evaluated: an automobile interior cleaner, car deodorizing spray, anti-static spray, waterproofing spray, microorganism deodorizer, and disinfectant spray. The exposure factors were based on 10,000 respondents over 15 years old. Inhalation dose was calculated from the concentration released into the room air and time used. The use rates of the spray products ranged from 0.4 to 11% and differed significantly by gender (p < 0.001). Aerosol types had a higher mass per use and longer duration of usage than trigger types. The median concentration of the trigger type ranged from 17.35 to 373.38 mg/m3, while that of the aerosol type ranged from 36.66 to 1601.97 mg/m3. The median inhalation dose of the trigger and aerosol types ranged from 2.04 × 10-3 to 0.20 and 2.60 × 10-3 to 1.71 mg/kg/day, respectively. The inhalation dose of the disinfectant spray increased with the level of education (p < 0.001), while the inhalation doses of the other spray products were not significantly associated with gender, age, income, or education.

Receptor-based aggregate exposure assessment of phthalates based on individual's simultaneous use of multiple cosmetic products.

To estimate realistic exposure to a chemical, the aggregate exposure from multiple consumer products should be considered. A receptor-based aggregate exposure assessment was conducted according to individuals' exposure factors and simultaneous use patterns including co-use and non-use. A product-based aggregate exposure assessment was conducted by product usage rates of population and users' exposure factors. Two aggregate exposure assessments were compared. Exposure factors for 31 cosmetic products were collected by face-to-face interviews with 1001 members of the Korean population through national representative sampling. The concentrations of phthalates in 214 cosmetic products were analyzed by GC-MS-MS. The average aggregate exposure dose (AED) determined by the receptor-based method for di(2-ethylhexyl)phthalate (DEHP), di-n-butyl phthalate (DnBP), and diethyl phthalate (DEP) were 0.68 ±â€¯0.87, 1.08 ±â€¯5.71, and 2.47 ±â€¯9.05 µg/kg/day, respectively. The cosmetics that contributed most to the receptor-based AED were skin care and body care products for DEHP, nail care products for DnBP, and fragrance and hair care products for DEP. The young female group showed the highest exposure. The product-based aggregate exposure assessment method underestimated high exposure but overestimated average exposure for DnBP and DEP. The receptor-based aggregate exposure assessment method would be used to determine high exposure groups.

Characteristics of Indoor PM2.5 Concentration in Gers Using Coal Stoves in Ulaanbaatar, Mongolia.

Coal combustion in ger areas is the main source of ambient air pollution in Ulaanbaatar (Mongolia). This study determined the characteristics of indoor PM2.5 concentrations in gers using coal stoves during winter. The study population consisted of 60 gers in the Chingeltei district of Ulaanbaatar. The indoor particle number concentration (PNC) in each ger was measured using a Dylos DC1700 particle counter for 24 h in January and February 2016. The PNC by Dylos was converted into the mass concentration using a calibration equation developed using a collocated real-time light scattering monitor adjusted by gravimetric measurement. The average 24 h PM2.5 concentration was 203.9 ± 195.1 µg/m³ in gers with traditional stoves (n = 29) and 257.5 ± 204.4 µg/m³ in those with improved stoves (n = 31). In the daily profile, concentrations were lower at night, increased in the early morning, and peaked up to noon. The temperature in gers was slightly higher than that recommended in winter. Many development-assistance programs have supported the installation of improved energy-efficient stoves. Better control measures are needed to improve the indoor air quality of gers.

Exposure factors for cleaning, automotive care, and surface protection products for exposure assessments.

Accurately measuring the usage patterns of consumer products (CPs) is important to conduct realistic exposure assessments. We determined the exposure factors for 18 consumer products: household bleach, mold stain remover, all-purpose cleaner, washing machine cleaner, air conditioner cleaner, glass cleaner, drain cleaner, adhesive remover, liquid snow chain, tire shine spray, wheel cleaner, rain repellent, car wax spray, leather polish, furniture polish, anti-fog product, fabric waterproofing spray, and rust inhibitor. Field survey staff visited homes and collected product use information via face-to-face interviews. In total, 10,000 participants (5010 men and 4990 women) aged 15 years and older completed the questionnaire. Household bleach had the highest use rate of 47.4% and use rates for the other products ranged from 0.8 to 21.7%. The use rates of many CPs differed by age group and gender. Many household cleaning products were used regularly, but some products, such as air conditioner cleaner and liquid snow chain, were used in specific seasons or for specific purposes; therefore, they were used less frequently compared to cleaning products. These exposure factor data will be useful as input data for exposure and risk assessments and setting safety guidelines.

Effects of adsorption onto silica sand particles on the hydrolysis of tetracycline antibiotics.

Due to high usage of tetracycline antibiotics, concerns have been raised about their environmental fate. In this study, potential changes in the pseudo-first-order hydrolysis rate constants for three tetracyclines, tetracycline (TC), oxytetracycline (OTC) and chlortetracycline (CTC), were evaluated by measuring the rate constants in batch and column leaching experiments. The first-order hydrolysis rate constants were measured at pH 5, 7, and 9 using batch tests. The values were highest at pH 7 for all three tetracyclines (0.0030 ± 0.0004, 0.0042 ± 0.0001, and 0.0323 ± 0.0003 h(-1) for TC, OTC, and CTC, respectively), indicating relatively short environmental half-lives of tetracyclines. Interestingly, it was found that the rates of degradation of the parent tetracyclines were much faster when silica sand was present in a batch solution or when the solution was passed through a silica column. For example, the ratios of the first-order degradation rate constants obtained in the column experiments to those in batch experiments were 13.2, 2.1, and 2.0 for TC, OTC, and CTC at a volumetric flow rate of 0.08 mL h(-1), with an observed tendency for this ratio to increase with an increased flow rate. This indicates that the silica surface may serve as a catalyst for hydrolysis and that the actual environmental half-lives of tetracycline antibiotics could be shorter than those estimated from laboratory hydrolysis rate constants using the standard batch protocol. Furthermore, the toxicity of the column effluent containing hydrolysis metabolites was assessed using bioluminescence inhibition in Vibrio fischeri. It was estimated that the toxicity of the metabolites of CTC was lower than that of their parent compound, whereas the toxicity of metabolites of TC and OTC was as high as or higher than that of their parent compounds.

Investigation of norovirus occurrence in groundwater in metropolitan Seoul, Korea.

Groundwater is an important source of drinking and household water worldwide. Hence, the quality of groundwater is very important for preventing waterborne disease outbreaks and should be properly monitored. This study investigated the prevalence of waterborne viruses and fecal indicators in groundwater in metropolitan Seoul and Gyeonggi province, South Korea. A total of 116 samples of groundwater were taken using NanoCeram filters during both summer (June to August) and fall-winter seasons (October to December) in 2008. Among 71 sampling sites, 28 (48.3%) and 18 (35.3%) were positive for norovirus (NoV) from the summer and fall-winter season, respectively. The identified genotypes of NoV include GI-1, 4, 8, 9 and GII-4, 10, 11 (or 17), 13, 15 (or 16). None of fecal indicators was significantly correlated with NoV in groundwater. Among the tested fecal indicators, somatic coliphage (95.3%) showed an excellent true-negative rate of NoV occurrence. The combination of chemical, microbial and viral indicators increased the positive predictive value (50-100%). This study demonstrated a high prevalence of NoV in groundwater in metropolitan Seoul areas and characterized the positive and negative predictive values of a fecal indicator for predicting NoV prevalence.