RESUMEN
Interference colors hold significant importance in optics and arts. Current methods for printing interference colors entail complex procedures and large-scale printing systems for the scarcity of inks that exhibit both sensitivity and tunability to external fields. The production of highly transparent inks capable of rendering transmissive colors has presented ongoing challenges. Here, a type of paramagnetic ink based on 2D materials that exhibit polychrome in one magnetic field is invented. By precisely manipulating the doping ratio of magnetic elements within titanate nanosheets, the magneto-optical sensitivity named Cotton-Mouton coefficient is engineerable from 728 to a record high value of 3272 m-1 T-2, with negligible influence on its intrinsic wide optical bandgap. Combined with the sensitive and controllable magneto-responsiveness of the ink, modulate and non-invasively print transmissive interference colors using small permanent magnets are precised. This work paves the way for preparing transmissive interference colors in an energy-saving and damage-free manner, which can expand its use in widespread areas.
RESUMEN
Monolayer WTe2 has attracted significant attention for its unconventional superconductivity and topological edge states. However, its air sensitivity poses challenges for studying intrinsic defect structures. This study addresses this issue using a custom-built inert gas interconnected system, and investigate the intrinsic grain boundary (GB) structures of monolayer polycrystalline 1T' WTe2 grown by nucleation-controlled chemical vapor deposition (CVD) method. These findings reveal that GBs in this system are predominantly governed by W-Te rhombi with saturated coordination, resulting in three specific GB prototypes without dislocation cores. The GBs exhibit anisotropic orientations influenced by kinks formed from these fundamental units, which in turn affect the distribution of grains in various shapes within polycrystalline flakes. Scanning tunneling microscopy/spectroscopy (STM/S) analysis further reveals metallic states along the intrinsic 120° twin grain boundary (TGB), consistent with computed band structures. This systematic exploration of GBs in air-sensitive 1T' WTe2 monolayers provides valuable insights into emerging GB-related phenomena.
RESUMEN
Electro-optical effect-based liquid crystal devices have been extensively used in optical modulation techniques, in which the Kerr coefficient reflects the sensitivity of the liquid crystals and determines the strength of the device's operational electric field. The Peterlin-Stuart theory and the O'Konski model jointly indicate that a giant Kerr coefficient could be obtained in a material with both a large geometrical anisotropy and an intrinsic polarization, but such a material is not yet reported. Here we reveal a ferroelectric effect in a monolayer two-dimensional mineral vermiculite. A large geometrical anisotropy factor and a large inherent electric dipole together raise the record value of Kerr coefficient by an order of magnitude, till 3.0 × 10-4 m V-2. This finding enables an ultra-low operational electric field of 102-104 V m-1 and the fabrication of electro-optical devices with an inch-level electrode separation, which has not previously been practical. Because of its high ultraviolet stability (decay <1% under ultraviolet exposure for 1000 hours), large-scale production, and energy efficiency, prototypical displayable billboards have been fabricated for outdoor interactive scenes. This work provides new insights for both liquid crystal optics and two-dimensional ferroelectrics.
RESUMEN
Developing highly efficient catalysts is significant for Li-CO2 batteries. However, understanding the exact structure of catalysts during battery operation remains a challenge, which hampers knowledge-driven optimization. Here we use X-ray absorption spectroscopy to probe the reconstruction of CoSx (x = 8/9, 1.097, and 2) pre-catalysts and identify the local geometric ligand environment of cobalt during cycling in the Li-CO2 batteries. We find that different oxidized states after reconstruction are decisive to battery performance. Specifically, complete oxidation on CoS1.097 and Co9S8 leads to electrochemical performance deterioration, while oxidation on CoS2 terminates with Co-S4-O2 motifs, leading to improved activity. Density functional theory calculations show that partial oxidation contributes to charge redistributions on cobalt and thus facilitates the catalytic ability. Together, the spectroscopic and electrochemical results provide valuable insight into the structural evolution during cycling and the structure-activity relationship in the electrocatalyst study of Li-CO2 batteries.
RESUMEN
Achieving light modulation in the spectral range of 200-280 nm is a prerequisite for solar-blind ultraviolet communication, where current technologies are mainly based on the electro-luminescent self-modulation of the ultraviolet source. External light modulation through the electro-birefringence control of liquid crystal (LC) devices has shown success in the visible-to-infrared regions. However, the poor stability of conventional LCs against ultraviolet irradiation and their weak electro-optical response make it challenging to modulate ultraviolet light. Here, an external ultraviolet light modulator is demonstrated using two-dimensional boron nitride LC. It exhibits robust ultraviolet stability and a record-high specific electro-optical Kerr coefficient of 5.1 × 10â»2 m V-2, being three orders of magnitude higher than those of other known electro-optical media that are transparent (or potentially transparent) in the ultraviolent spectral range. The sensitive response enables fabricating transmissive and stable ultraviolet-C electro-optical Kerr modulators for solar-blind ultraviolet light. An M-ary coding array with high transmission density is also demonstrated for solar-blind ultraviolet communication.
RESUMEN
Electrochemical CO2 reduction reaction (CO2RR) in acid can solve alkalinity issues while highly corrosive and reductive acidic electrolytes usually cause catalyst degradation. Inhibiting catalyst degradation is crucial for the stability of acidic CO2RR. Here, we reveal the microenvironment changes of dynamic Bi-based catalysts and develop a pulse chronoamperometry (CA) strategy to improve the stability of acidic CO2RR. In situ fluorescence mappings show that the local pH changes from neutral to acid, and the in situ Raman spectra reveal the dynamic evolution of interfacial water structures in the microenvironment. We propose that the surface charge properties of dynamic catalysts affect the competitive adsorption of K+ and protons, thereby causing the differences in local pH and CO2RR intermediate adsorption. We also develop a pulse CA strategy to reactivate catalysts, and the stability of acidic CO2RR is improved by 2 orders of magnitude for 100 h operation, which is higher than most reports on the stability of acidic CO2RR. This work gives insights on how microenvironment changes affecting the stability of acidic CO2RR, and provides guidance for designing stable catalysts in acidic electrolytes.
RESUMEN
2D materials are promising for strain engineering due to their atomic thickness and exceptional mechanical properties. In particular, non-uniform and localized strain can be induced in 2D materials by generating out-of-plane deformations, resulting in novel phenomena and properties, as witnessed in recent years. Therefore, the locally strained 2D materials are of great value for both fundamental studies and practical applications. This review discusses techniques for introducing local strains to 2D materials, and their feasibility, advantages, and challenges. Then, the unique effects and properties that arise from local strain are explored. The representative applications based on locally strained 2D materials are illustrated, including memristor, single photon emitter, and photodetector. Finally, concluding remarks on the challenges and opportunities in the emerging field of locally strained 2D materials are provided.
RESUMEN
The carbon dioxide reduction reaction (CO2RR) driven by electricity can transform CO2 into high-value multi-carbon (C2+) products. Copper (Cu)-based catalysts are efficient but suffer from low C2+ selectivity at high current densities. Here La(OH)3 in Cu catalyst is introduced to modify its electronic structure towards efficient CO2RR to C2+ products at ampere-level current densities. The La(OH)3/Cu catalyst has a remarkable C2+ Faradaic efficiency (FEC2+) of 71.2% which is 2.2 times that of the pure Cu catalyst at a current density of 1,000 mA cm-2 and keeps stable for 8 h. In situ spectroscopy and density functional theory calculations both show that La(OH)3 modifies the electronic structure of Cu. This modification favors *CO adsorption, subsequent hydrogenation, *COâ*COH coupling, and consequently increases C2+ selectivity. This work provides a guidance on facilitating C2+ product formation, and suppressing hydrogen evolution by La(OH)3 modification, enabling efficient CO2RR at ampere-level current densities.
RESUMEN
2D magnets have generated much attention due to their potential for spintronic devices. Heterostructures of 2D magnets are interesting platforms for exploring physical phenomena and applications. However, the controlled growth of 2D room-temperature ferromagnetic heterostructures is challenging. Here, one-pot chemical vapor deposition growth of stable 2D Cr2 O3 -CrN mosaic heterostructures (MHs) is reported with a controlled ratio of components that possess robust room-temperature ferromagnetism. The 2D MHs consist of Cr2 O3 flakes with embedded CrN subdomains and the CrN:Cr2 O3 ratio can be tuned from 0% to 100% during growth. By changing the CrN:Cr2 O3 ratio, the ferromagnetism of the MHs (e.g., saturation magnetization, coercive field), which originates from the interfacial coupling between Cr2 O3 and CrN, can be controlled. Importantly, the obtained Cr2 O3 -CrN MHs are stable in air at elevated temperatures and have robust ferromagnetism with Curie temperature >400 K. This work presents a facile method for fabricating 2D MHs with tunable magnetism which will benefit high-temperature spintronics.
RESUMEN
Bilayer semiconductors have attracted much attention due to their stacking-order-dependent properties. However, as both 3R- and 2H-stacking are energetically stable at high temperatures, most of the high-temperature grown bilayer materials have random 3R- or 2H-stacking orders, leading to non-uniformity in optical and electrical properties. Here, a chemical vapor deposition method is developed to grow bilayer semiconductors with controlled stacking order by modulating the resolidified chalcogen precursors supply kinetics. Taking tungsten disulfide (WS2 ) as an example, pure 3R-stacking (100%) and 2H-stacking dominated (87.6%) bilayer WS2 are grown by using this method and both show high structural and optical quality and good uniformity. Importantly, the bilayer 3R-stacking WS2 shows higher field effect mobility than 2H-stacking samples, due to the difference in stacking order-dependent surface potentials. This method is universal for growing other bilayer semiconductors with controlled stacking orders including molybdenum disulfide and tungsten diselenide, paving the way to exploit stacking-order-dependent properties of these family of emerging bilayer materials.
RESUMEN
Enzyme-mimicking confined catalysis has attracted great interest in heterogeneous catalytic systems that can regulate the geometric or electronic structure of the active site and improve its performance. Herein, a liquid-assisted chemical vapor deposition (LCVD) strategy is proposed to simultaneously confine the single-atom Ru sites onto sidewalls and Janus Ni/NiO nanoparticles (NPs) at the apical nanocavities to thoroughly energize the N-doped carbon nanotube arrays (denoted as Ni/NiO@Ru-NC). The bifunctional Ni/NiO@Ru-NC electrocatalyst exhibits overpotentials of 88 and 261 mV for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) at 100 mA cm-2 in alkaline solution, respectively, all ranking the top tier among the carbon-supported metal-based electrocatalysts. Moreover, once integrated into an anion-exchange membrane water electrolysis (AEMWE) system, Ni/NiO@Ru-NC can act as an efficient and robust bifunctional electrocatalyst to operate stably for 50 h under 500 mA cm-2. Theoretical calculations and experimental exploration demonstrate that the confinement of Ru single atoms and Janus Ni/NiO NPs can regulate the electron distribution with strong orbital couplings to activate the NC nanotube from sidewall to top, thus boosting overall water splitting.
RESUMEN
Developing efficient electrode materials is a key towards high power electrochemical energy storage devices. Two-dimensional (2D) MXene shows excellent conductivity and electrochemical performance among other materials. However, the restacking of MXene layers may degrade their specific capacity and cycling performance. Considering this challenge, here we have designed a composite made of 2D MXene nanosheets and lanthanum oxide (La2O3) nanoparticles to overcome the limitations. The bifunctionality of La2O3 nanoparticles prevents the restacking of MXene layers and enhances the electrochemical properties of the electrode due to its good Faradic characteristics. The specific capacitance of the La2O3/MXene composite electrode is 366 F/g at 1 A/g, which is 4.5 and 3 times higher than those of the individual La2O3 and MXene. The composite electrode displays a capacitance retention of 96% after 1,000 cycles, which is due to synergistic effects between the two components and indicates the potential of La2O3/MXene composite for supercapacitors.
RESUMEN
Direct seawater electrolysis is promising for sustainable hydrogen gas (H2) production. However, the chloride ions in seawater lead to side reactions and corrosion, which result in a low efficiency and poor stability of the electrocatalyst and hinder the use of seawater electrolysis technology. Here we report a corrosion-resistant RuMoNi electrocatalyst, in which the in situ-formed molybdate ions on its surface repel chloride ions. The electrocatalyst works stably for over 3000 h at a high current density of 500 mA cm-2 in alkaline seawater electrolytes. Using the RuMoNi catalyst in an anion exchange membrane electrolyzer, we report an energy conversion efficiency of 77.9% and a current density of 1000 mA cm-2 at 1.72 V. The calculated price per gallon of gasoline equivalent (GGE) of the H2 produced is $ 0.85, which is lower than the 2026 technical target of $ 2.0/GGE set by the United Stated Department of Energy, thus, suggesting practicability of the technology.
Asunto(s)
Cloruros , Gasolina , Corrosión , Aniones , Membranas , Halógenos , Agua de MarRESUMEN
Natural and sustainable 2D minerals have many unique properties and may reduce reliance on petroleum-based products. However, the large-scale production of 2D minerals remains challenging. Herein, a green, scalable, and universal polymer intercalation and adhesion exfoliation (PIAE) method to produce 2D minerals such as vermiculite, mica, nontronite, and montmorillonite with large lateral sizes and high efficiency, is developed. The exfoliation relies on the dual functions of polymers involving intercalation and adhesion to expand interlayer space and weaken interlayer interactions of minerals, facilitating their exfoliation. Taking vermiculite as an example, the PIAE produces 2D vermiculite with an average lateral size of 1.83 ± 0.48 µm and thickness of 2.40 ± 0.77 nm at a yield of ≈30.8%, surpassing state-of-the-art methods in preparing 2D minerals. Flexible films are directly fabricated by the 2D vermiculite/polymer dispersion, exhibiting outstanding performances including mechanical strength, thermal resistance, ultraviolet shielding, and recyclability. The representative application of colorful multifunctional window coatings in sustainable buildings is demonstrated, indicating the potential of massively produced 2D minerals.
RESUMEN
Developing efficient noble-metal-free surface-enhanced Raman scattering (SERS) substrates and unveiling the underlying mechanism is crucial for ultrasensitive molecular sensing. Herein, we report a facile synthesis of mixed-dimensional heterostructures via oxygen plasma treatments of two-dimensional (2D) materials. As a proof-of-concept, 1D/2D WO3-x/WSe2 heterostructures with good controllability and reproducibility are synthesized, in which 1D WO3-x nanowire patterns are laterally arranged along the three-fold symmetric directions of 2D WSe2. The WO3-x/WSe2 heterostructures exhibited high molecular sensitivity, with a limit of detection of 5 × 10-18 M and an enhancement factor of 5.0 × 1011 for methylene blue molecules, even in mixed solutions. We associate the ultrasensitive performance to the efficient charge transfer induced by the unique structures of 1D WO3-x nanowires and the effective interlayer coupling of the heterostructures. We observed a charge transfer timescale of around 1.0 picosecond via ultrafast transient spectroscopy. Our work provides an alternative strategy for the synthesis of 1D nanostructures from 2D materials and offers insights on the role of ultrafast charge transfer mechanisms in plasmon-free SERS-based molecular sensing.
RESUMEN
Main group indium materials have been known as promising electrocatalysts for two-electron-involved carbon dioxide reduction to produce formate, which is a key energy vector in many industrial reactions. However, the synthesis of two-dimensional (2D) monometallic nonlayered indium remains a great challenge. Here, we present a facile electrochemical reduction strategy to transform 2D indium coordination polymer into elemental indium nanosheets. In a customized flow cell, the reconstructed metallic indium exhibits a high Faradaic efficiency (FE) of 96.3% for formate with a maximum partial current density exceeding 360 mA cm-2 and negligible degradation after 140 h operation in 1 M KOH solution, outperforming the state-of-the-art indium-based electrocatalysts. Moreover, in and ex situ electrochemical analysis and characterizations demonstrate that the enhanced exposure of active sites and mass/charge transport at the CO2 gas-catalyst-electrolyte triple-phase interface and the restrained electrolyte flooding are contributing to producing and stabilizing carbon dioxide radical anion intermediates, thus leading to superior catalytic performance.
RESUMEN
Two-dimensional (2D) semiconductors including transition metal dichalcogenides (TMDCs) have gained attention in optoelectronics for their extraordinary properties. However, the large amount and locally distributed lattice defects affect the optical properties of 2D TMDCs, and the defects originate from unstable factors in the synthesis process. In this work, we develop a method of pre-melting and resolidification of chalcogen precursors (sulfur and selenium), namely resolidified chalcogen, as precursor for the chemical vapor deposition growth of TMDCs with ultrahigh quality and uniformity. Taking WS2 as an example, the monolayer WS2 shows uniform fluorescence intensity and a small full-width at half-maximum of photoluminescence peak at low temperatures with an average value of 13.6±1.9â meV. The defect densities at the interior and edge region are both low and comparable, i.e., (9±3)×1012 â cm-2 and (10±4)×1012 â cm-2 , indicating its high structural quality and uniformity. This method is universal in growing high quality monolayer MoS2 , WSe2 , MoSe2 , and will benefit their applications.
RESUMEN
The development of flexible zinc-air batteries (FZABs) has attracted broad attention in the field of wearable electronic devices. Gel electrolyte is one of the most important components in FZABs, which is urgent to be optimized to match with Zn anode and adapt to severe climates. In this work, a polarized gel electrolyte of polyacrylamide-sodium citric (PAM-SC) is designed for FZABs, in which the SC molecules contain large amount of polarized -COO- functional groups. The polarized -COO- groups can form an electrical field between gel electrolyte and Zn anode to suppress Zn dendrite growth. Besides, the -COO- groups in PAM-SC can fix H2 O molecules, which prevents water from freezing and evaporating. The polarized PAM-SC hydrogel delivers a high ionic conductivity of 324.68â mS cm-1 and water retention of 96.85 % after being exposed for 96â h. FZABs with the PAM-SC gel electrolyte exhibit long cycling life of 700â cycles at -40 °C, showing the application prospect under extreme conditions.
RESUMEN
The 2D MoS2 with superior optoelectronic properties such as high charge mobility and broadband photoresponse has attracted broad research interests in photodetectors (PD). However, due to the atomic thin layer of 2D MoS2 , its pure photodetectors usually suffer from inevitable drawbacks such as large dark current, and intrinsically slow response time. Herein, a new organic material BTP-4F with high mobility is successfully stacked with 2D MoS2 film to form an integrated 2D MoS2 /organic P-N heterojunction, facilitating efficient charge transfer as well as significantly suppressed dark current. As a result, the as-obtained 2D MoS2 /organic (PD) has exhibited excellent response and fast response time of 332/274 µs. The analysis validated photogenerated electron transition from this monolayer MoS2 to subsequent BTP-4F film, whereas the transited electron is originated from the A- exciton of 2D MoS2 by temperature-dependent photoluminescent analysis. The ultrafast charge transfer time of ≈0.24 ps measured by time-resolved transient absorption spectrum is beneficial for efficient electron-hole pair separation, greatly contributing to the obtained fast photoresponse time of 332/274 µs. This work can open a promising window to acquire low-cost and high-speed (PD).
RESUMEN
Aggregation of two-dimensional (2D) nanosheet fillers in a polymer matrix is a prevalent problem when the filler loading is high, leading to degradation of physical and mechanical properties of the composite. To avoid aggregation, a low-weight fraction of the 2D material (<5 wt %) is usually used to fabricate the composite, limiting performance improvement. Here, we develop a mechanical interlocking strategy where well-dispersed high filling content (up to 20 wt %) of boron nitride nanosheets (BNNSs) can be incorporated into a polytetrafluoroethylene (PTFE) matrix, resulting in a malleable, easy-to-process and reusable BNNS/PTFE composite dough. Importantly, the well-dispersed BNNS fillers can be rearranged into a highly oriented direction due to the malleable nature of the dough. The resultant composite film has a high thermal conductivity (4408% increase), low dielectric constant/loss, and excellent mechanical properties (334%, 69%, 266%, and 302% increases for tensile modulus, strength, toughness, and elongation, respectively), making it suitable for thermal management applications in the high-frequency areas. The technique is useful for the large-scale production of other 2D material/polymer composites with a high filler content for different applications.