RESUMEN
In this study, we successfully synthesized a Pd-doped SnO2 (Pd-SnO2) material with a flower-like hierarchical structure using the solvothermal method. The material's structural proper-ties were characterized employing techniques such as XRD, XPS, FESEM and HRTEM. A gas sensor fabricated from the 2.0 mol% Pd-SnO2 material demonstrated exceptional sensitivity (Ra/Rg = 106) to 100 ppm ethanolamine at an operating temperature of 150 °C, with rapid response/recovery times of 10 s and 12 s, respectively, along with excellent linearity, selectivity, and stability, and a detection limit down to 1 ppm. The superior gas-sensing performance is attributed to the distinctive flower-like hierarchical architecture of the Pd-SnO2 and the lattice distortions introduced by Pd doping, which substantially boost the material's sensing characteristics. Further analysis using density functional theory (DFT) has revealed that within the Pd-SnO2 system, Sn exhibits strong affinities for O and N, leading to high adsorption energies for ethanolamine, thus enhancing the system's selectivity and sensitivity to ethanolamine gas. This research introduces a novel approach for the efficient and rapid detection of ethanolamine gas.
RESUMEN
Recent studies have identified butanone as a promising biomarker in the breath of lung cancer patients, yet the understanding of its gas-sensing properties remains limited. A key challenge has been to enhance the gas-sensing performance of materials toward butanone, particularly under ultraviolet light exposure. Herein, we report the synthesis of a novel three-dimensional composite material composed of SnO2 incorporated with Bi2O3 using facile hydrothermal and impregnation precipitation methods. Detailed physical and chemical characterizations were performed to assess the properties of the developed material. Upon activation with ultraviolet light, our composite exhibited exceptionally high sensitivity to butanone. Remarkably, the butanone response was nearly 3 times greater for the Bi2O3-loaded SnO2 composite than for pristine SnO2, achieving a response value of 70. This substantial improvement is due to the synergistic effect of the material's distinctive three-dimensional architecture and the presence of Bi2O3, which significantly augmented the gas-sensing capability of butanone. To elucidate the underlying gas-sensing mechanism, we conducted first-principles calculations using density functional theory (DFT). The computational analysis revealed that the Bi2O3-containing system possesses superior adsorption energy for butanone. Ultimately, our findings suggest that the Bi-SnO2 composite holds great promise as an optimal sensing material for the detection of butanone under ultraviolet illumination.
RESUMEN
Methanol oxidation reaction (MOR) in anodes is one of the significant aspects of direct methanol fuel cells (DMFCs), which also plays a critical role in achieving a carbon-neutral economy. Designing and developing efficient, cost-effective, and durable non-Pt group metal-based methanol oxidation catalysts are highly desired, but a gap still remains. Herein, we report well-defined hierarchical NiZnx@CuO nanoarray architectures as active electrocatalysts for MOR, synthesized by combining thermal oxidation treatment and magnetron sputtering deposition through a brass mesh precursor. After systematically evaluating the electrocatalytic performance of NiZnx@CuO nanoarray catalysts with different preparation conditions, we found that the NiZn1000@CuO (thermally oxidized at 500 °C for 2 h, nominal thickness of the NiZn alloy film is 1000 nm) electrode delivers a high current density of 449.3 mA cm-2 at 0.8 V for MOR in alkaline media as well as excellent operation stability (92% retention after 12 h). These outstanding MOR performances can be attributed to the hierarchical well-defined structure that can not only render abundant active sites and a synergistic effect to enhance the electrocatalytic activity but also can effectively facilitate mass and electron transport. More importantly, we found that partial Zn atoms could leach from the NiZn alloy, resulting in rough surface nanorods, which would further increase the specific surface area. These results indicate that the NiZn1000@CuO nanoarray architecture could be a promising Pt group metal alternative as an efficient, cost-effective, and durable anode catalyst for DMFCs.
RESUMEN
Three-dimensional (3D) nanoporous CuAg (NPCuAg) alloy catalysts with various Cu/Ag ratios are prepared by electrochemical dealloying of metallic glassy (MG) precursors. All dealloyed samples exhibit homogenous nanoporous structure and element composition distribution. After systematically evaluating their electrocatalytic performance toward MOR, it was found that the catalytic activity of the NPCuAg catalysts is enhanced along with the increase of Cu/Ag ratio, which may be attributed to the more exposed active reaction sites derived from high surface area of nanoporous structure and the optimal synergistic effect. Thus, the NPCu1.75 Ag alloy catalyst presents the best methanol electro-oxidation properties, including a high current density of 397.2â mA cm-2 and good operation stability that retaining 84.5 % catalytic activity even after 7200â s. These results outperform most reported copper-based MOR catalysts in alkaline methanol solution. Considering these advantages, the designed electrodes are expected to be promising catalysts for alkaline DMFCs applications.
RESUMEN
Exploration of advanced carbon anode material is the key to circumventing the sluggish kinetics and poor rate capability for potassium ion storage. Herein, a synergistic synthetic strategy of engineering both surface and structure is adopted to design N, S co-doped carbon nanotubes (NS-CNTs). The as-designed NS-CNTs exhibit unique features of defective carbon surface, hollow tubular channel, and enlarged interlayer space. These features significantly contribute to a large potassium storage capacity of 307 mA h g-1 at 1 A g-1 and a remarkable rate performance with a capacity of 151 mA h g-1 even at 5 A g-1 . Furthermore, an excellent cyclability with 98% capacity retention after 500 cycles at 2 A g-1 is also achieved. Systematic analysis by in situ Raman spectroscopy and ex situ TEM demonstrates the structural stability and reversibility in the charge-discharge process. Although the kinetics studies reveal the capacitive-dominated process for potassium storage, density functional theory calculations provide evidence that N, S co-doping contributes to expanding the interlayer space to promote the K-ion insertion, improving the electronic conductivity, and providing ample defective sites to favor the K-ion adsorption.
RESUMEN
Pd-WO3 nanosheets were synthesized through a one-step hydrothermal method using Na2PdCl4 solution as the palladium source and sodium tungstate as the tungsten source, and were used to detect acetone. After being characterized by TEM, XRD, BET and XPS, it was found that Pd doped on the surface of WO3 nanosheets was mainly present as metal palladium, and the specific surface area increased after doping. In addition, the effect of Pd doping on gas sensing properties was studied. When the Pd-doped amount was 2 at%, sensors fabricated with the composites had the best gas sensing performance. Under a 100 ppm acetone atmosphere, the response time was 1 s and the recovery time was 9 s. The detection limit for acetone was 50 ppb at the optimum working temperature of 300 °C, and the selectivity for acetone was excellent under 100 ppm atmosphere (S acetone/S ethanol = 5.06). The excellent gas sensing properties of this material are mainly attributed to the high catalytic activity and the catalytic spill-over effect of the Pd nanoparticles, which provided additional active sites for the sensitive materials.
RESUMEN
Tubule-like structured metal oxides, combined with macroscale pores onto their surfaces, can fast facilitate gas-accessible diffusion into the sensing channels, thus leading a promoted utilization ratio of sensing layers. However, it generally remains a challenge for developing a reliable approach to prepare them. Herein, this contribution describes a density gradient strategy for obtaining broken In2O3 microtubes from the In2O3 products prepared using a chemical conversion method. These In2O3 microtubes hold a diameter about 1.5 µm with many broken regions and massive ultrafine nanopores onto their surfaces. When employed as a sensing element for detection of triethylamine (TEA) vapor, these broken In2O3 microtubes exhibited a significant response toward TEA at 1-100 ppm and the lowest detected concentration can reach 0.1 ppm. In addition, an excellent selectivity of the sensor to TEA was also displayed, though upon exposure of other interfering vapors, including ammonia, methanol, ethanol, isopropanol, acetone, toluene, and hydrogen. Such promoted sensing performances toward TEA were ascribed to the broken configuration (superior gas permeability and high utilization ratio), one-dimensional configuration with less agglomerations, and low bond energy for C-N in a TEA molecule.
RESUMEN
Manganese oxide (MnOx) supported on CeO2 nanocubes (MnOx/CeO2) were synthesized and tested for the catalytic combustion of chlorobenzene (CB), which was taken as a model compound of chlorinated volatile organic compounds (CVOCs). The catalytic activity tests demonstrated that MnOx/CeO2 nanocube catalysts exhibited a catalytic activity significantly better than that of bare CeO2 nanocubes, indicating MnOx plays a significant role for CB oxidation. To illustrate the effect of MnOx on the CeO2 nanocubes, experimental and theoretical methods such as density functional theory (DFT) calculations were carried out. Experimental characterization testified that the introduction of MnOx to CeO2 nanocubes brought the facile reduction of cerium species, larger amount of Oα species and oxygen vacancies, which lead to the enhanced catalytic performance of MnOx/CeO2 nanocube. Furthermore, DFT calculations clearly validated that MnOx/CeO2 (100) models could form the oxygen vacancies more easily, and CB molecules were preferentially adsorbed on the MnOx/CeO2 (100) models than on the CeO2 (100) models, which facilitated the easier formation of C-O* bond; this facile bond formation enabled faster CB decomposition into COx, thereby a higher CB conversion on the MnOx/CeO2 (100) could be found. Therefore, the vital role of MnOx can be successfully elucidated by both experimental and theoretical methods. Hence, this finding can be utilized for enhanced catalytic performance of CeO2 nanocube catalysts for the CVOCs elimination.
RESUMEN
Sodium-ion batteries (SIBs) have shown extensive prospects as alternative rechargeable batteries in large-scale energy storage systems, because of the abundance and low cost of sodium. The development of high-performance cathode and anode materials is a big challenge for SIBs. As is well known, TiNb2O7 (TNO) exhibits a high capacity of â¼250 mAh g-1 with excellent capacity retention as a Li-insertion anode for lithium-ion batteries, but it has rarely been discussed as an anode for SIBs. Here, we demonstrate ball-milled TiNb2O7 (BM-TNO) as an SIB anode, which provides an average voltage of â¼0.6 V and a reversible capacity of â¼180 mAh g-1 at a current density of 15 mA g-1, and presents excellent cyclability with 95% capacity retention after 500 cycles at 500 mA g-1. A possible Na storage mechanism in BM-TNO is also proposed.
RESUMEN
Metal-Chitosan (CTS) composite was first synthesized through the metal composition of chitosan (CTS) and metal ions. The formed composite was alternately deposited on the base with sodium polystyrene sulfonate (PSS) through a layer-by-layer self-assembling technique, followed by an in situ reduction by sodium borohydride to produce a polyelectrolyte nanocomposite thin film containing metal nanoparticles. Assembly, surface morphology and electrochemical properties of the composite membrane were analyzed by UV-visible absorption spectroscopy (UV-vis), atomic force microscopy (AFM) and cyclic voltammetry (CV). The UV-Vis results indicated that the absorbance of the multilayer film at the characteristic absorption peak increased as the membrane bilayers increased, in a good linear relationship, which demonstrated that the multilayer film was uniformly assembled on the base. AFM images showed that the surface of the multilayer thin-film composite had some degree of roughness and metal nanoparticles of 10-20 nm in size were generated on the membrane. The CV results indicated that the metal nanocomposite film had excellent electrocatalytic activity to glucose and had a potential for applications in electrochemical sensors.
Asunto(s)
Quitosano/química , Nanopartículas del Metal/química , Nanocompuestos/química , Poliestirenos/química , Catálisis , Electroquímica , Propiedades de SuperficieRESUMEN
In this study, V-W/TiO2, Mn-V-W/TiO2 and Mn-W/TiO2 nanoparticles were prepared by homogeneous precipitation method and investigated for the catalytic combustion of chlorobenzene (CB), which was used as a model compound of chlorinated volatile organic compounds (CVOCs). The samples were characterized by X-ray diffraction (XRD), nitrogen adsorption-desorption, transmission electron microscope (TEM) and hydrogen temperature-programed reduction (H2-TPR). The average size of the nanoparticles was -20 nm. Manganese species were evenly distributed on the surface of the V-W/TiO2 catalyst, and a small amount of manganese addition did not affect the crystal form, crystallinity and morphology of the V-W/TiO2 catalyst. In addition, low-temperature catalytic activity of V-W/TiO2 catalysts could be effectively improved. When the molar ratio of Mn/(Mn + V) was 0.25 or 0.4, the catalyst displayed the highest low-temperature activity. This was possibly due to Mn (VO3)x formed by the reaction of manganese and vanadium species. Meanwhile, we also found that the addition of oxalic acid was benefit to the improvement of the catalytic activities. When manganese content was high, such as Mn (0.75) VW/Ti, the catalyst activity declined seriously, and the reason was also discussed.
Asunto(s)
Clorobencenos/química , Manganeso/química , Óxidos/química , Temperatura , Titanio/química , Tungsteno/química , Compuestos de Vanadio/química , Catálisis , Oxidación-ReducciónRESUMEN
In most graphene-based electrochemical applications, graphene nanoplatelets (GNPs) have been applied. Now, for the first time, electrochemical properties of GNPs, namely, its electrochemical activity, potential window, and double-layer capacitance, have been investigated. These properties are compared with those of carbon nanotubes (CNTs). GNP- and CNT-coated electrodes were then applied for electrochemical oxidation of endocrine-disrupting chemicals. The GNP-coated electrode was characterized by atomic force microscopy and electrochemical techniques. Compared with the CNT-coated electrode, higher peak current for the oxidation of 4-nonylphenol is achieved on the GNP-coated electrode, together with lower capacitive current. Electrochemical oxidation of 2,4-dichlorophenol, bisphenolâ A, and octylphenol in the absence or presence of 4-nonylphenol was studied on the GNP-coated electrode. The results suggest that GNPs have better electrochemical performance than CNTs and are thus more promising for electrochemical applications, for example, electrochemical detection and removal of endocrine-disrupting chemicals.
RESUMEN
Monolayer self-assembly (MSA) was discovered owing to the spectacular liquid repellency (lyophobicity) characteristic of typical self-assembling monolayers of long tail amphiphiles, which facilitates a straightforward visualization of the MSA process without the need of any sophisticated analytical equipment. It is this remarkable property that allows precise control of the self-assembly of discrete, well-defined monolayers, and it was the alternation of lyophobicity and lyophilicity (liquid affinity) in a system of monolayer-forming bifunctional organosilanes that allowed the extension of the principle of MSA to the layer-by-layer self-assembly of planed multilayers. On this basis, the possibility of generating at will patterned monolayer surfaces with lyophobic and lyophilic regions paves the way to the engineering of molecular templates for site-defined deposition of materials on a surface via either precise MSA or wetting-driven self-assembly (WDSA), namely, the selective retention of a liquid repelled by the lyophobic regions of the pattern on its lyophilic sites. Highly ordered organosilane monolayer and thicker layer-by-layer assembled structures are shown to be ideally suited for this purpose. Examples are given of novel WDSA and MSA processes, such as guided deposition by WDSA on lyophobic-lyophilic monolayer and bilayer template patterns at elevated temperatures, from melts and solutions that solidify upon cooling to the ambient temperature, and the possible extension of constructive nanolithography to thicker layer-by-layer assembled films, which paves the way to three-dimensional (3D) template patterns made of readily available monofunctional n-alkyl silanes only. It is further shown how WDSA may contribute to MSA on nanoscale template features as well as how combined MSA and WDSA modes of surface assembly may lead to composite surface architectures exhibiting rather surprising new properties. Finally, a critical evaluation is offered of the scope, advantages, and limitations of MSA and WDSA in the bottom-up fabrication of surface structures on variable length scales from nano to macro.
RESUMEN
This paper reports on the surface modification of plastic microfluidic channels to prepare different biomolecule micropatterns using ultraviolet (UV) photografting methods. The linkage chemistry is based upon UV photopolymerization of acryl monomers to generate thin films (0.01-6 microm) chemically linked to the organic backbone of the plastic surface. The commodity thermoplastic, cyclic olefin copolymer (COC) was selected to build microfluidic chips because of its significant UV transparency and easiness for microfabrication by molding techniques. Once the polyacrylic films were grafted on the COC surface using photomasks, micropatterns of proteins, DNA, and biotinlated conjugates were readily obtained by surface chemical reactions in one or two subsequent steps. The thickness of the photografted films can be tuned from several nanometers up to several micrometers, depending on the reaction conditions. The micropatterned films can be prepared inside the microfluidic channel (on-chip) or on open COC surfaces (off-chip) with densities of functional groups about 10(-7) mol/cm2. Characterization of these films was performed by attenuated-total-reflectance IR spectroscopy, fluorescence microscopy, profilometry, atomic force microscopy, and electrokinetic methods.