RESUMEN
This study investigated the effect of hydraulic retention time (HRT) on the denitrification performance and microbial composition of reactors, packed with composite polycaprolactone and corncob carbon sources, during the treatment mariculture wastewater. The optimal HRT was 3 h, and average nitrogen removal efficiency was 99.00 %, 99.07 %, and 98.98 % in the HRT =3, 5, and 7 h groups, respectively. However, the 3 h group (DOC 2.91 mg/L) was the only group with a lower DOC concentration than that of the influent group (3.31 mg/L). Moreover, species richness was lower at HRT =3 h, with a greater proportion of denitrification-dominant phyla, such as Proteobacteria. The abundance of the NarG, NirK, and NirS functional genes suggested that the HRT =3 h group had a significant advantage in the nitrate and nitrite reduction phases. Under a short HRT, the composite carbon source achieved a good denitrification effect.
Asunto(s)
Reactores Biológicos , Desnitrificación , Poliésteres , Poliésteres/metabolismo , Zea mays , Microbiota , Aguas Residuales/química , Eliminación de Residuos Líquidos/métodos , Nitrógeno , NitratosRESUMEN
Since the cultivation condition of microbe biomass production (mycelia yield) involves a variety of factors, it's a laborious process to obtain the optimal cultivation condition of Antrodia cinnamomea (A. cinnamomea). This study proposed a hybrid machine learning approach (i.e., ANFIS-NM) to identify the potent factors and optimize the cultivation conditions of A. cinnamomea based on a 32 fractional factorial design with seven factors. The results indicate that the ANFIS-NM approach successfully identified three key factors (i.e., glucose, potato dextrose broth, and agar) and significantly boosted mycelia yield. The interpretability of ANFIS rules made the cultivation conditions visually interpretable. Subsequently, a three-factor five-level central composite design was used to probe the optimal yield. This study demonstrates the proposed hybrid machine learning approach could significantly reduce the time consumption in laboratory cultivation and increase mycelia yield that meets SDGs 7 and 12, hitting a new milestone for biomass production.
Asunto(s)
Aprendizaje Automático , Redes Neurales de la Computación , Biomasa , Micelio , Lógica DifusaRESUMEN
Magnetically actuated soft millirobots (magneto-robot) capable of accomplishing on-demand tasks in a remote-control manner using noninvasive magnetic fields are of great interest in biomedical settings. However, the solid magneto-robots are usually restricted by the limited deformability due to the predesigned shape, while the liquid magneto-robots are capable of in situ shape reconfiguration but limited by the low stiffness and geometric instability due to the fluidity. Herein, we propose a magneto-active solid-liquid state transformable millirobot (named MRF-Robot) made from a magnetorheological fluid (MRF). The MRF-Robot can transform freely and rapidly between the Newtonian fluid in the liquid state upon a weak magnetic field (â¼0 mT) and the Bingham plasticity in the solid state upon a strong magnetic field (â¼100 mT). The MRF-Robot in the liquid state can realize diverse behaviors of large deformation, smooth navigation, in situ splitting, merging, and gradient pulling actuated by a weak magnetic field with a high gradient. The MRF-Robot in the solid state is distinguished for the controllable locomotion with reconfigured shapes and versatile object manipulations (including pull, push, and rotate the objects) driven by a strong magnetic field with a high gradient. Moreover, the MRF-Robot could continuously maneuver to accomplish diverse tasks in the comprehensive scenes and achieve liquid-drug delivery, thrombus clearance, and fluid-flow blockage in the phantom vascular model under magnetic actuation.
RESUMEN
Recently, there has been strong interest in flexible and wearable electronics to meet the technological demands of modern society. Environmentally-friendly and scalable electronic textiles is a key area that is still significantly underdeveloped. Here, we describe a novel strain sensor composed of aligned cellulose acetate (CA) nanofibers with belt-like morphology and a reduced graphene oxide (RGO) layer. The unique spatial alignment, microstructure and wettability of CA nanofibrous membranes facilitate their close contact with deposited GO colloids. After a portable and fast hot-press process within 700 s at 150 °C, the GO on CA membrane can be facilely reduced to a conductive RGO layer. Moreover, the connection among contiguous CA nanofibers and the interaction between the GO and CA substrate were both highly enhanced, resulting in superior mechanical strength with Young's modulus of 1.3 GPa and small sheet resistance lower than 10 kΩ. Therefore, the conductive RGO/CA membrane was successfully utilized as a strain sensor in a broad deformation range and with versatile deformation types. Moreover, the distinctive mechanical strength under different stretch angles endowed the well-aligned RGO/CA film with intriguing sensitivity against stress direction. Such a cost-effective and environmentally-friendly method can be easily extended to the scalable production of graphene-based flexible electronic textiles.
RESUMEN
A recently isolated thermotolerant microalga Desmodesmus sp. F2 has the traits of becoming potential biodiesel feedstock, such as high growth rate, high lipid content, and quick precipitation. Its overall lipid productivity was 113 mg/L/d when grown under non-optimal conditions using batch cultivation. A two-step response surface methodology was adopted to optimize its cultivation conditions. The overall lipid productivity was increased to 263 mg/L/d when the cells were grown under the optimized conditions of 6.6mM initial nitrogen level and 6 days nitrogen depletion treatment in 700 µmol/m(2)/s light intensity at 35°C using batch cultivation. Fed-batch and semi-continuous cultivations were employed to further increase its lipid productivity to 213 and 302 mg/L/d, respectively. The 302 mg/L/d is the highest overall lipid productivity of microalgae ever reported in the literature. This study provides the information required for the design and operation of photobioreactors for large scale outdoor cultivation of this species.
Asunto(s)
Lípidos/biosíntesis , Microalgas/metabolismo , Biomasa , Microalgas/crecimiento & desarrollo , FotobiorreactoresRESUMEN
Statistical experimental design and bioreactor strategies were applied to enhance CO(2) fixation ability of microalga Scenedesmus obliquus CNW-N. Four operating parameters strongly influencing microalgal CO(2) fixation efficiency (namely, CO(2) concentration, CO(2) flow rate, magnesium concentration, and light intensity) were optimized with response surface methodology. The optimal range of parameters achieving the best overall performance of specific growth rate and CO(2) fixation rate was determined with overlay counter plot techniques. Optimal ranges of CO(2) concentration, CO(2) flow rate, magnesium concentration and light intensity were 2.0-2.5%, 0.3-0.5 vvm, 1.7-2.7 mM and 180-250 µmol m(-2) s(-1), respectively, achieving a specific growth rate of >1.22 d(-1) and CO(2) fixation rate of >800 mg L(-1) d(-1). Semi-batch operations further enhanced the biomass productivity, photosynthesis efficiency, and CO(2) fixation rate to 1030 mg L(-1) d(-1), 10.5%, and 1782 mg L(-1) d(-1), respectively. This performance is better than the results reported by most related studies.
Asunto(s)
Reactores Biológicos , Biotecnología/métodos , Dióxido de Carbono/química , Scenedesmus/metabolismo , Biomasa , Cinética , Magnesio/análisis , Magnesio/química , Microalgas/metabolismo , Modelos Estadísticos , Fotoquímica/métodos , Fotosíntesis , Factores de TiempoRESUMEN
A novel experimental design, combining mixture design and response surface methodology (RSM), was developed to investigate the competitive adsorption behavior of lead, copper and cadmium by an indigenous isolate Enterobacter sp. J1 able to tolerate high concentrations of a variety of heavy metals. Using the proposed combinative experimental design, two different experiment designs in a ternary metal biosorption system can be integrated to a succinct experiment and the number of experimental trials was markedly reduced from 38 to 26 by reusing the mutual experimental data. Triangular contour diagrams and triangular three-dimensional surface plots were generated to describe the ternary metal biosorption equilibrium data in mixture design systems. The results show that the preference of metal sorption of Enterobacter sp. J1 decreased in the order of Pb(2+)>Cu(2+)>Cd(2+). The presence of other metals resulted in a competitive effect. The influence of the other two metals in ternary metal biosorption system can be easily determined by comparing the stray distance from the single metal biosorption. The behavior of competitive biosorption was successfully described and predicted using a combined Langmuir-Freundlich model along with new three-dimensional contour-surface plots.
Asunto(s)
Cadmio/química , Cobre/química , Enterobacter/química , Plomo/química , Contaminantes Químicos del Agua/química , Adsorción , Modelos Químicos , Eliminación de Residuos Líquidos/métodos , Purificación del Agua/métodosRESUMEN
Rhamnolipid is one of the most effective and commonly used biosurfactant with wide industrial applications. Systematic strategies were applied to improve rhamnolipid (RL) production with a newly isolated indigenous strain Pseudomonas aeruginosa EM1 originating from an oil-contaminated site located in southern Taiwan. Seven carbon substrates and four nitrogen sources were examined for their effects on RL production. In addition, the effect of carbon to nitrogen (C/N) ratio on RL production was also studied. Single-factor experiments show that the most favorable carbon sources for RL production were glucose and glycerol (both at 40 g/L), giving a RL yield of 7.5 and 4.9 g/L, respectively. Meanwhile, sodium nitrate appeared to be the preferable nitrogen source, resulting in a RL production of 8.6g/L. Using NaNO(3) as the nitrogen source, an optimal C/N ratio of 26 and 52 was obtained for glucose- and glycerol-based culture, respectively. To further optimize the composition of fermentation medium, twenty experiments were designed by response surface methodology (RSM) to explore the favorable concentration of three critical components in the medium (i.e., glucose, glycerol, and NaNO(3)). The RSM analysis gave an optimal concentration of 30.5, 18.1, and 4.9 g/L for glucose, glycerol, and NaNO(3), respectively, predicting a maximum RL yield of 12.6 g/L, which is 47% higher than the best yield (8.6 g/L) obtained from preliminary selection tests and single factor experiments (glucose and NaNO(3) as the carbon and nitrogen source). The NMR and mass spectrometry analysis show that the purified RL product contained L-rhamnosyl-beta-hydroxydecanoyl-beta-hydroxydecanoate (RL1) and L-rhamnosyl L-rhamnosyl-beta-hydroxydecanoyl-beta-hydroxydecanoate (RL2). Meanwhile, HPLC analysis indicates that the molar ratio of RL1 and RL2 in the purified rhamnolipid product was ca. 1:1.
Asunto(s)
Lípidos/biosíntesis , Petróleo , Pseudomonas aeruginosa/metabolismo , Contaminantes del Suelo , Carbono/metabolismo , Concentración de Iones de Hidrógeno , Nitrógeno/metabolismo , Pseudomonas aeruginosa/clasificación , Microbiología del SueloRESUMEN
An indigenous purple nonsulfur bacterium Rhodopseudomonas palustris WP3-5 was used to produce hydrogen phototrophically from acetate (HAc) and butyrate (HBu), which are the major soluble products from acidogenic dark fermentation. Statistical experimental design methodology was applied to identify optimal composition of the two carbon substrates in the medium, leading to better H2 production performance of R. palustris WP3-5. Three performance indexes were used to assess the effectiveness of the phototrophic H2 production; they were H2 yield (Y H2), maximum H2 production rate (Rmax) and maximum cumulative H2 evolution (Hmax). An overlay contour plot was used to determine the optimal concentration range of HAc and HBu, taking into account all three performance indexes (i.e., Rmax, Hmax, and Y H2) simultaneously. With the response surface analysis, R. palustris WP3-5 could produce H2 efficiently with the best Rmax, Hmax, and Y H2 of 39.5 ml/h, 2738 ml, and 51.6%, respectively. This performance is superior to most reported values in the literature, indicating that the statistical experimental design is an effective tool to improve phototrophic H2 production with R. palustris WP3-5.
Asunto(s)
Acetatos/farmacología , Butiratos/farmacología , Carbono/farmacología , Hidrógeno/metabolismo , Procesos Fototróficos/efectos de los fármacos , Rhodopseudomonas/efectos de los fármacos , Rhodopseudomonas/metabolismo , Propiedades de Superficie/efectos de los fármacosRESUMEN
An indigenous strain Pseudomonas aeruginosa S2 (P. aeruginosa S2), isolated from diesel-contaminated soil, produced extracellular surface-active material identified as rhamnolipid. Due to its excellent surface activity, rhamnolipid is known to be well-suited for stimulating the bioremediation efficiency of oil contaminated sites. To improve production yield of rhamnolipid with P. aeruginosa S2, various carbon and nitrogen sources were screened to select favorable ones leading to better biosurfactant production yield. It was found that using 4% glucose could attain better rhamnolipid yield, while 50 mM NH4NO3 appeared to be the most preferable nitrogen source. Meanwhile, the effect of carbon to nitrogen ratio (C/N ratio) on rhamnolipid yield was also investigated, and the optimal C/N ratio was identified as approximately 11.4. Moreover, response surface methodology (RSM) was applied to optimize the trace element concentration for rhamnolipid production. Results from two-level design indicate that concentrations of MgSO4 and FeSO4 were the most significant factors affecting rhamnolipid production. Using steepest ascent method and RSM analysis, an optimal medium composition was determined, giving a rhamnolipid production yield of 2.37 g/L in 100 h at 37 degrees C and 200 rpm agitation. Scale-up production of rhamnolipid in a well-controlled 5 L jar fermentor using the optimal medium and operating condition (at 37 degrees C and pH 6.8) further elevated the biosurfactant production yield to 5.31 g/L (in 97 h), which is over 2-fold higher than the best results obtained from shake-flask tests.
Asunto(s)
Glucolípidos/metabolismo , Pseudomonas aeruginosa/metabolismo , Tensoactivos/metabolismo , Carbono/farmacología , Cromatografía Líquida de Alta Presión , Medios de Cultivo/farmacología , Fermentación/efectos de los fármacos , Espectrometría de Masas , Nitrógeno/farmacología , Pseudomonas aeruginosa/efectos de los fármacos , Pseudomonas aeruginosa/crecimiento & desarrolloRESUMEN
This first-attempt study used constructed bacterial consortia containing Escherichia coli DH5alpha (a weak decolorizer) and its UV-irradiated mutants (E. coli UVT1 and UV68; strong decolorizers) via equilateral triangle diagram and mixture experimental design to assess color removal during species evolution. The results showed that although strain DH5alpha was not an effective decolorizer, its presence might still played a significant role in affecting optimal color removal capabilities of mixed consortia (e.g., E. coli DH5alpha, UVT1 and UV68) for two model azo dyes; namely, reactive red 22 (RR22) and reactive black 5 (RB5). Contour analysis of ternary systems also clearly showed that decolorization of RR22 and RB5 by DH5alpha-containing active mixed consortia was more effective than mono-cultures of the stronger decolorizer alone (e.g., UVT1). The optimal composition of the mixed consortium (UV68, UVT1, DH5alpha) achieving the highest specific decolorization rate was (13%:58%:29%) and (0%:74%:26%) for decolorization of RR22 and RB5, respectively, with initial total cell density fixed at OD(600)=3.5+/-0.28.
Asunto(s)
Compuestos Azo/metabolismo , Colorantes/metabolismo , Escherichia coli/metabolismo , Residuos Industriales , Administración de Residuos/métodos , Compuestos Azo/química , Biodegradación Ambiental , Colorantes/química , Concentración de Iones de Hidrógeno , Cinética , Modelos Químicos , Factores de TiempoRESUMEN
This study was undertaken to investigate biosorption kinetics and equilibria of lead (Pb), copper (Cu) and cadmium (Cd) ions using the biomass of Enterobacter sp. J1 isolated from a local industry wastewater treatment plant. Efficiency of metal ion recovery from metal-loaded biomass to regenerate the biosorbent was also determined. The results show that Enterobacter sp. J1 was able to uptake over 50mg of Pb per gram of dry cell, while having equilibrium adsorption capacities of 32.5 and 46.2mg/g dry cell for Cu and Cd, respectively. In general, Langmuir and Freundlich models were able to describe biosorption isotherm fairly well, except that prediction of Pb adsorption was relatively poor with Langmuir model, suggesting a different mechanism for Pb biosorption. Adjusting the pH value to 3.0 led to nearly complete desorption of Cd from metal-loaded biomass, while over 90% recovery of Pb and Cu ions was obtained at pHAsunto(s)
Cadmio/metabolismo
, Cobre/metabolismo
, Farmacorresistencia Bacteriana
, Enterobacter/metabolismo
, Plomo/metabolismo
, Absorción
, Cadmio/farmacología
, Cobre/farmacología
, Enterobacter/efectos de los fármacos
, Enterobacter/ultraestructura
, Concentración de Iones de Hidrógeno
, Plomo/farmacología
, Microscopía Electrónica de Rastreo
, Análisis Espectral
RESUMEN
The green fluorescent protein (GFP) isolated from the jellyfish Aequorea victoria is a very useful reporter for real-time bioprocess sensing. GFP culture fluorescence is a composite signal that can be influenced by factors such as culture autofluorescence, inner filter effect (IFE), and photobleaching. These factors complicate accurate estimation of GFP concentrations from the culture fluorescence. IFE is especially problematic when using GFP in monitoring transgenic plant cell suspension cultures, due to the aggregated nature of the cells and the high biomass concentration in these culture systems. Reported approaches for online compensation of IFE in monitoring culture NADH fluorescence or bioluminescence require online measurement of biomass density or culture turbidity/optical density, in addition to fluorescence/bioluminescence measurement. In this study, culture GFP fluorescence was used successfully to estimate GFP concentration and other important states in bioreactor culture of transgenic tobacco cells, while the influences of IFE and culture autofluorescence were rectified without the need for an additional biomass sensor. This was achieved by setting up a novel model-based state observer. First, we developed an improved model for a backscatter fluorescence probe that takes into account the influence of IFE and autofluorescence on reporting culture GFP concentration from online fluorescence. The state observer was then established using the extended Kalman filter (EKF), based on the fluorescence probe model, a dynamic state model of the plant cell bioreactor, and online GFP fluorescence measurement. Several versions of the observer were introduced to address practical requirements associated with monitoring GFP fluorescence of plant cell cultures. The proposed approach offers an effective means for online compensation of IFE to enable quantitative interpretation of the culture fluorescence signals for accurate reporting of GFP or GFP-fusion protein expression.