RESUMEN
The coupling of high-capacity cathodes and lithium metal anodes promises to be the next generation of high-energy-density batteries. However, the fast-structural degradations of the cathode and anode challenge their practical application. Herein, we synthesize an electrolyte additive, tris(2,2,3,3,3-pentafluoropropyl) borane (TPFPB), for ultra-stable lithium (Li) metal||Ni-rich layered oxide batteries. It can be preferentially adsorbed on the cathode surface to form a stable (B and F)-rich cathode electrolyte interface film, which greatly suppresses the electrolyte-cathode side reactions and improves the stability of the cathode. In addition, the electrophilicity of B atoms in TPFPB enhances the solubility of LiNO3 by 30 times in ester electrolyte to significantly improve the stability of the Li metal anode. Thus, the Li||Ni-rich layered oxide full batteries using TPFPB show high stability and an ultralong cycle life (up to 1500 cycles), which also present excellent performance even under high voltage (4.8 V), high areal mass loading (30 mg cm-2) and wide temperature range (-30â¼60°C). The Li||LiNi0.9Co0.05Mn0.05O2 (NCM90) pouch cell using TPFPB with a capacity of 3.1 Ah reaches a high energy density of 420 Wh kg-1 at 0.1 C and presents outstanding cycling performance.
RESUMEN
Electrocatalytic sulfur reduction reaction (SRR) is emerging as an effective strategy to combat the polysulfide shuttling effect, which remains a critical factor impeding the practical application of the Li-S battery. Single-atom catalyst (SAC), one of the most studied catalytic materials, has shown considerable potential in addressing the polysulfide shuttling effect in a Li-S battery. However, the role played by transition metal vs coordination mode in electrocatalytic SRR is trial-and-error, and the general understanding that guides the synthesis of the specific SAC with desired property remains elusive. Herein, we use first-principles calculations and machine learning to screen a comprehensive data set of graphene-based SACs with different transition metals, heteroatom doping, and coordination modes. The results reveal that the type of transition metal plays the decisive role in SAC for electrocatalytic SRR, rather than the coordination mode. Specifically, the 3d transition metals exhibit admirable electrocatalytic SRR activity for all of the coordination modes. Compared with the reported N3C1 and N4 coordinated graphene-based SACs covering 3d, 4d, and 5d transition metals, the proposed para-MnO2C2 and para-FeN2C2 possess significant advantages on the electrocatalytic SRR, including a considerably low overpotential down to 1 mV and reduced Li2S decomposition energy barrier, both suggesting an accelerated conversion process among the polysulfides. This study may clarify some understanding of the role played by transition metal vs coordination mode for SAC materials with specific structure and desired catalytic properties toward electrocatalytic SRR and beyond.
RESUMEN
Despite the recognized influence of natural factors on groundwater, the impact of human activities remains less explored because of the challenges in measuring such effects. To address this gap, our study proposes an approach that considers carbon emissions as an indicator of human activity intensity and quantifies their impact on groundwater storage. The combination of carbon emission data and groundwater storage data for 17,152 grid cells over 16 years in 4 typical basins shows that they were generally negatively correlated, whereas both agriculture and aviation had positive impacts on groundwater storage. The longest impact from aviation and agriculture can even persist for 7 years. Furthermore, an increase of 1 Yg CO2/km2 per second in emissions from petroleum processing demonstrates the most pronounced loss of groundwater storage in the Yangtze River Basin (approximately 4.1 mm). Moreover, regions characterized by high-quality economic development tend to have favorable conditions for groundwater storage. Overall, our findings revealed the substantial role of human activities in influencing groundwater dynamics from both temporal and spatial aspects. This study fills a crucial gap by exploring the relationship between human activities and groundwater storage through the introduction of a quantitative modeling framework based on carbon emissions. It also provides insights for facilitating empirical groundwater management planning and achieving optimal emission reduction levels.
RESUMEN
Ischemia/reperfusion (I/R) is a pathological process that occurs in numerous organs and is often associated with severe cellular damage and death. Ectodysplasin-A2 receptor (EDA2R) is a member of the TNF receptor family that has anti-inflammatory and antioxidant effects. However, to the best of our knowledge, its role in the progression of myocardial I/R injury remains unclear. The present study aimed to investigate the role of EDA2R during myocardial I/R injury and the molecular mechanisms involved. In vitro, dexmedetomidine (DEX) exhibited a protective effect on hypoxia/reoxygenation (H/R)-induced cardiomyocyte injury and downregulated EDA2R expression. Subsequently, EDA2R silencing enhanced cell viability and reduced the apoptosis of cardiomyocytes. Furthermore, knockdown of EDA2R led to an elevated mitochondrial membrane potential (MMP), repressed the release of Cytochrome C and upregulated Bcl-2 expression. EDA2R knockdown also resulted in downregulated expression of Bax, and decreased activity of Caspase-3 and Caspase-9 in cardiomyocytes, reversing the effects of H/R on mitochondria-mediated apoptosis. In addition, knockdown of EDA2R suppressed H/R-induced oxidative stress. Mechanistically, EDA2R knockdown inactivated the NF-κB signaling pathway. Additionally, downregulation of EDA2R weakened myocardial I/R injury in mice, as reflected by improved left ventricular function and reduced infarct size, as well as suppressed apoptosis and oxidative stress. Additionally, EDA2R knockdown repressed the activation of NF-κB signal in vivo. Collectively, knockdown of EDA2R exerted anti-apoptotic and antioxidant effects against I/R injury in vivo and in vitro by suppressing the NF-κB signaling pathway.
RESUMEN
Poly(vinylidene fluoride) (PVDF)-based solid electrolytes with a Li salt-polymer-little residual solvent configuration are promising candidates for solid-state batteries. Herein, we clarify the microstructure of PVDF-based composite electrolyte at the atomic level and demonstrate that the Li+-interaction environment determines both interfacial stability and ion-transport capability. The polymer works as a "solid diluent" and the filler realizes a uniform solvent distribution. We propose a universal strategy of constructing a weak-interaction environment by replacing the conventional N,N-dimethylformamide (DMF) solvent with the designed 2,2,2-trifluoroacetamide (TFA). The lower Li+ binding energy of TFA forms abundant aggregates to generate inorganic-rich interphases for interfacial compatibility. The weaker interactions of TFA with PVDF and filler achieve high ionic conductivity (7.0 × 10-4 S cm-1) of the electrolyte. The solid-state Li||LiNi0.8Co0.1Mn0.1O2 cells stably cycle 4900 and 3000 times with cutoff voltages of 4.3 and 4.5 V, respectively, as well as deliver superior stability at -20 to 45 °C and a high energy density of 300 Wh kg-1 in pouch cells.
RESUMEN
Microorganisms inhabit the gastrointestinal tract of ruminants and regulate body metabolism by maintaining intestinal health. The state of gastrointestinal health is influenced not only by the macro-level factors of optimal development and the physiological structure integrity but also by the delicate equilibrium between the intestinal flora and immune status at the micro-level. Abrupt weaning in young ruminants causes incomplete development of the intestinal tract resulting in an unstable and unformed microbiota. Abrupt weaning also induced damages to the microecological homeostasis of the intestinal tract, resulting in the intestinal infections and diseases, such as diarrhea. Recently, nutritional and functional yeast culture has been researched to tackle these problems. Herein, we summarized current known interactions between intestinal microorganisms and the body of young ruminants, then we discussed the regulatory effects of using yeast culture as a feed supplement. Yeast culture is a microecological preparation that contains yeast, enriched with yeast metabolites and other nutrient-active components, including ß-glucan, mannan, digestive enzymes, amino acids, minerals, vitamins, and some other unknown growth factors. It stimulates the proliferation of intestinal mucosal epithelial cells and the reproduction of intestinal microorganisms by providing special nutrient substrates to support the intestinal function. Additionally, the ß-glucan and mannan effectively stimulate intestinal mucosal immunity, promote immune response, activate macrophages, and increase acid phosphatase levels, thereby improving the body's resistance to several disease. The incorporation of yeast culture into young ruminants' diet significantly alleviated the damage caused by weaning stress to the gastrointestinal tract which also acts an effective strategy to promote the balance of intestinal flora, development of intestinal tissue, and establishment of mucosal immune system. Our review provides a theoretical basis for the application of yeast culture in the diet of young ruminants.
RESUMEN
Biochar colloids (BCs) can be used as adsorbent materials for remediation of phenanthrene due to their high specific surface area and other characteristics. Understanding the effects of phenanthrene on the transport of BCs contributes to facilitate the removal of phenanthrene in soil and water habitats. In this work, the influence of phenanthrene on the transport of BCs under different environmental factors (pH, ionic strength (IS), media size) in a one-dimensional sand column was firstly explored together with a real-time visualization system to explore the transport mechanism of BCs in two-dimensional sand tank. The results show that phenanthrene adsorbed on the surface of BCs, shielded its surface charge and reduced the mobility of BCs in porous media. Acidic conditions promoted the agglomeration of BCs and adsorption of phenanthrene, resulting in a 51.03 % decrease in the maximum breakthrough rate of BCs compared to alkaline conditions. The same was true for the high IS condition, where the maximum breakthrough rate of BCs was only 0.95 % at IS = 50. Additionally, there was a substantial and positive correlation between media particle size and BCs mobility. As the quartz sand particle size increased, the maximum breakthrough rates of BCs were 2.67 %, 33.28 %, and 52.27 % in the 1-D experiment, and 0, 13.88 %, and 13.10 % in the 2-D experiment, respectively. The contact area of BCs with the medium expands under the fine particle size condition, leading to a significant decrease in the mobility of BCs at low potentials influenced by phenanthrene. This finding is significant for biochar application in phenanthrene contaminated soil and groundwater remediation.
RESUMEN
Developing efficient and durable self-supporting catalytic electrodes is an important way for industrial applications of hydrogen evolution reaction. Currently, commercial nickel foam (NF)-based electrode has been widely used due to its good catalytic performance. However, the NF consisting of smooth skeleton surface and large pores not only exhibits poor conductivity but also provides insufficient space for catalyst decoration and sufficient adhesion, resulting in inadequate catalytic performance and poor durability of NF-based electrodes. In this paper, a novel three-dimensional porous Ni substrate with multangular skeleton surface and small pore structure was prepared by a modified spark plasma sintering technique, and subsequently Ni3Se2@Porous Ni electrode with a large number of Ni3Se2 nanosheets uniformly distributed on the surface was obtained by one-step in-situ selenization. The electrode exhibits outstanding conductivity and catalytic hydrogen evolution reaction, providing a low overpotential of 183 mV at a current density of 100 mA cm-2. Due to the strong interfacial bonding between Ni and Ni3Se2, the Ni3Se2@Porous Ni electrode shows strong durability, which can work stably at 85 mA cm-2 for more than 200 h. This work provides an effective strategy for the rational preparation of metal substrates for efficient and durable self-supporting catalytic electrodes.
RESUMEN
A better understanding of how tumor microenvironments shape immune responses after radiotherapy (RT) is required to improve patient outcomes. This study focuses on the observation that dendritic cells (DCs) infiltrating irradiated cervical tumors are retained in transforming growth factor (TGF)-ß-abundant regions. We report that TGF-ß secretion from cervical cancer cells was increased by irradiation in a dose-dependent manner and that this significantly suppressed the expression of allostimulatory markers and Th1 cytokines in DCs. To investigate further, we blocked the TGF-ß signal in DCs and observed that RT had a dose-dependent immune-promoting effect, improving DC maturation. This suggested that proinflammatory mediators may also be induced by RT, but their effects were being counteracted by the simultaneously increased levels of TGF-ß. Prostaglandin E2 (PGE2), a proinflammatory molecule, was shown to be one such mediator. Adjusting the TGF-ß/PGE2 ratio by inhibiting TGF-ß rebooted RT-induced DC cytoskeletal organization by stimulating myosin light chain (MLC) phosphorylation. Consequently, the homing of intra-tumorally infiltrated DCs to tumor-draining lymph nodes was enhanced, leading to the induction of more robust cytotoxic T cells. Ultimately, rebalancing the TGF-ß/PGE2 ratio amplified the therapeutic effects of RT, resulting in increased intra-tumoral infiltration and activation of CD8+ T cells, and improved tumor control and overall survival rate in mice. DC depletion experiments verified that the improvement in tumor control is directly correlated with the involvement of DCs via the PGE2-MLC pathway. This study emphasizes the importance of maintaining a balanced cytokine environment during RT, particularly hypofractionated RT; and it is advisable to block TGF-ß while preserving PGE2 in the tumor microenvironment in order to better stimulate DC homing and DC -T priming.
Asunto(s)
Linfocitos T CD8-positivos , Neoplasias , Humanos , Animales , Ratones , Neoplasias/metabolismo , Linfocitos T Citotóxicos , Células Dendríticas/metabolismo , Microambiente TumoralRESUMEN
The kinetics difference among multistep electrochemical processes leads to the accumulation of soluble polysulfides and thus shuttle effect in lithium-sulfur (Li-S) batteries. While the interaction between catalysts and representative species has been reported, the root of the kinetics difference, interaction change among redox reactions, remains unclear, which significantly impedes the catalysts design for Li-S batteries. Here, this work deciphers the interaction change among electrocatalytic sulfur reactions, using tungsten disulfide (WS2 ) a model system to demonstrate the efficiency of modifying electrocatalytic selectivity via dual-coordination design. Band structure engineering and orbital orientation control are combined to guide the design of WS2 with boron dopants and sulfur vacancies (B-WS2- x ), accurately modulating interaction with lithium and sulfur sites in polysulfide species for relatively higher interaction with short-chain polysulfides. The modified interaction trend is experimentally confirmed by distinguishing the kinetics of each electrochemical reaction step, indicating the effectiveness of the designed strategy. An Ah-level pouch cell with B-WS2- x delivers a gravimetric energy density of up to 417.6 Wh kg-1 with a low electrolyte/sulfur ratio of 3.6 µL mg-1 and negative/positive ratio of 1.2. This work presents a dual-coordination strategy for advancing evolutionarily catalytic activity, offering a rational strategy to develop effective catalysts for practical Li-S batteries.
RESUMEN
Expanding the utility of chimeric antigen receptor (CAR)-T cells in solid tumors requires improving their efficacy and safety. Hypoxia is a feature of most solid tumors that could be used to help CAR-T cells discriminate tumors from normal tissues. In this study, we developed hypoxia-responsive CAR-T cells by engineering the CAR to be under regulation of hypoxia-responsive elements and selected the optimal structure (5H1P-CEA CAR), which can be activated in the tumor hypoxic microenvironment to induce CAR-T cells with high polyfunctionality. Hypoxia-responsive CAR T cells were in a "resting" state with low CAR expression under normoxic conditions. Compared with conventional CAR-T cells, hypoxia-responsive CAR-T cells maintained lower differentiation and displayed enhanced oxidative metabolism and proliferation during cultivation, and they sowed a capacity to alleviate the negative effects of hypoxia on T-cell proliferation and metabolism. Furthermore, 5H1P-CEA CAR-T cells exhibited decreased T-cell exhaustion and improved T-cell phenotype in vivo. In patient-derived xenograft models, hypoxia-responsive CAR-T cells induced more durable antitumor activity than their conventional counterparts. Overall, this study provides an approach to limit CAR expression to the hypoxic tumor microenvironment that could help to enhance CAR T-cell efficacy and safety in solid tumors. SIGNIFICANCE: Engineering CAR-T cells to upregulate CAR expression under hypoxic conditions induces metabolic reprogramming, reduces differentiation, and increases proliferation to enhance their antitumor activity, providing a strategy to improve efficacy and safety.
Asunto(s)
Inmunoterapia Adoptiva , Neoplasias , Humanos , Neoplasias/metabolismo , Linfocitos T , Hipoxia/metabolismo , Microambiente Tumoral , Ensayos Antitumor por Modelo de XenoinjertoRESUMEN
Solid-state lithium batteries (SSLBs) have great development prospects in high-security new energy fields, but face major challenges such as poor charge transfer kinetics, high interface impedance, and unsatisfactory cycle stability. Defect engineering is an effective method to regulate the composition and structure of electrodes and electrolytes, which plays a crucial role in dominating physical and electrochemical performance. It is necessary to summarize the recent advances regarding defect engineering in SSLBs and analyze the mechanism, thus inspiring future work. This review systematically summarizes the role of defects in providing storage sites/active sites, promoting ion diffusion and charge transport of electrodes, and improving structural stability and ionic conductivity of solid-state electrolytes. The defects greatly affect the electronic structure, chemical bond strength and charge transport process of the electrodes and solid-state electrolytes to determine their electrochemical performance and stability. Then, this review presents common defect fabrication methods and the specific role mechanism of defects in electrodes and solid-state electrolytes. At last, challenges and perspectives of defect strategies in high-performance SSLBs are proposed to guide future research.
RESUMEN
The fillers in composite solid-state electrolyte are mainly responsible for the enhancement of the conduction of Li ions but barely regulate the formation of solid electrolyte interphase (SEI). Herein, a unique filler of dielectric NaNbO3 for the poly(vinylidene fluoride) (PVDF)-based polymer electrolyte, which is subjected to the exchange of Li+ and Na+ during cycling, is reported and the substituted Na+ is engaged in the construction of a fluorinated Li/Na hybrid SEI with high Young's modulus, facilitating the fast transport of Li+ at the interface at a high areal capacity and suppressing the Li dendrite growth. The dielectric NaNbO3 also induces the generation of high-dielectric ß phase of PVDF to promote the dissociation of Li salt. The Li/Li symmetrical cell exhibits a long-term dendrite-free cycling over 600 h at a high areal capacity of 3 mA h cm-2. The LiNi0.8Mn0.1Co0.1O2/Li solid-state cells with NaNbO3 stably cycle 2200 times at 2 C and that paired with high-loading cathode (10 mg cm-2) can stably cycle for 150 times and exhibit excellent performances at -20 °C. This work provides a novel design principle of fillers undertaking interfacial engineering in composite solid-state electrolytes for developing the safe and stable solid-state lithium metal battery.
RESUMEN
PURPOSE: The aim of this study was to compare the survival rates and toxicities of prophylactic extended-field radiation therapy (EFRT) and pelvic radiation therapy (PRT) among patients with cervical cancer with 2018 International Federation of Gynecology and Obstetrics (FIGO) stage IIIC1 disease. METHODS AND MATERIALS: We retrospectively analyzed patients with 2018 FIGO stage IIIC1 disease who were treated with definitive concurrent chemoradiotherapy at our institute between 2011 and 2015. A dose of 50.4 Gy in 28 fractions was delivered to the pelvic region (by PRT) or the pelvic plus para-aortic lymph node region (by EFRT) with intensity modulated radiation therapy. The first-line regimen of concurrent chemotherapy was weekly cisplatin. RESULTS: A total of 280 patients were included, with 161 patients treated with PRT and 119 patients treated with EFRT. After propensity score matching (1:1), 71 pairs of patients were selected. The respective 5-year rates of the patients treated with PRT and EFRT were 61.9% and 85.0% for overall survival (P = .025) and 53.0% and 77.9% for disease-free survival (DFS) (P = .004), respectively, after matching. In the subgroup analysis, patients were grouped into a high-risk group (122 patients) and a low-risk group (158 patients) based on 3 factors: positive common iliac lymph nodes, ≥3 pelvic lymph nodes, and 2014 FIGO stage IIIB disease. In both the high-risk and low-risk groups, EFRT significantly improved DFS compared with PRT. The rates of grade ≥3 chronic toxicities were 1.2% and 5.9% in the PRT and EFRT groups, respectively (P = .067). CONCLUSIONS: In comparison to PRT, prophylactic EFRT was associated with improved overall survival, DFS, and para-aortic lymph node control in patients with cervical cancer with FIGO stage IIIC1 disease. The incidence of grade ≥3 toxicities was higher in the EFRT group than in the PRT group, although the difference was not significant.
Asunto(s)
Neoplasias del Cuello Uterino , Femenino , Humanos , Estudios Retrospectivos , Neoplasias del Cuello Uterino/radioterapia , Neoplasias del Cuello Uterino/patología , Estadificación de Neoplasias , Cisplatino/uso terapéutico , Quimioradioterapia/efectos adversos , Quimioradioterapia/métodos , Pelvis/patologíaRESUMEN
Solid-state lithium metal batteries (SSLMBs) are promising candidates for high-energy-density energy storage devices. However, there still lacks an evaluation criterion to estimate real research status and compare overall performance of the developed SSLMBs. Herein, we propose a comprehensive descriptor, Li+ transport throughput ( φ L i + ${{\phi{} }_{{{\rm L}{\rm i}}^{+}}}$ ), to estimate actual conditions and output performance of the SSLMBs. The φ L i + ${{\phi{} }_{{{\rm L}{\rm i}}^{+}}}$ is defined as molar number of Li+ passing through unit area of electrode/electrolyte interface in an hour (mol m-2 h-1 ) during cycling of battery, which is a quantizable value after taking complex aspects including cycle rate, electrode areal capacity and polarization into account. On this basis, we evaluate the φ L i + ${{\phi{} }_{{{\rm L}{\rm i}}^{+}}}$ of liquid, quasi-solid-state and solid-state batteries, and highlight three key aspects to achieve high value of φ L i + ${{\phi{} }_{{{\rm L}{\rm i}}^{+}}}$ via building highly efficient cross-phase, cross-gap and cross-interface ion transport in the solid-state battery systems. We believe that the new concept of φ L i + ${{\phi{} }_{{{\rm L}{\rm i}}^{+}}}$ provides milestone guidelines towards large-scale commercialization of SSLMBs.
RESUMEN
The ionic conductivity of composite solid-state electrolytes does not meet the application requirements of solid-state lithium (Li) metal batteries owing to the harsh space charge layer of different phases and low concentration of movable Li+. Herein, we propose a robust strategy for creating high-throughput Li+ transport pathways by coupling the ceramic dielectric and electrolyte to overcome the low ionic conductivity challenge of composite solid-state electrolytes. A highly conductive and dielectric composite solid-state electrolyte is constructed by compositing the poly(vinylidene difluoride) matrix and the BaTiO3-Li0.33La0.56TiO3-x nanowires with a side-by-side heterojunction structure (PVBL). The polarized dielectric BaTiO3 greatly promotes the dissociation of Li salt to produce more movable Li+, which locally and spontaneously transfers across the interface to coupled Li0.33La0.56TiO3-x for highly efficient transport. The BaTiO3-Li0.33La0.56TiO3-x effectively restrains the formation of the space charge layer with poly(vinylidene difluoride). These coupling effects contribute to a quite high ionic conductivity (8.2 × 10-4 S cm-1) and lithium transference number (0.57) of the PVBL at 25 °C. The PVBL also homogenizes the interfacial electric field with electrodes. The LiNi0.8Co0.1Mn0.1O2/PVBL/Li solid-state batteries stably cycle 1,500 times at a current density of 180 mA g-1, and pouch batteries also exhibit an excellent electrochemical and safety performance.
Asunto(s)
Electrólitos , Litio , Iones , MetalesRESUMEN
Poor ion and high electron transport at the grain boundaries (GBs) of ceramic electrolytes are the primary reasons for lithium filament infiltration and short-circuiting of all-solid-state lithium metal batteries (ASLMBs). Herein, it is discovered that Li2 CO3 at the GBs of Li7 La3 Zr2 O12 (LLZO) sheets is reduced to highly electron-conductive LiCx during cycling, resulting in lithium penetration of LLZO. The ionic and electronic conductivity of the GBs within LLZO can be simultaneously tuned using sintered Li3 AlF6 . The generated LiAlO2 (LAO) infusion and F-doping at the GBs of LLZO (LAO-LLZOF) significantly reduce the Li2 CO3 content and broaden the energy bandgap of LLZO, which decreases the electronic conductivity of LAO-LLZOF. LAO forms a 3D continuous ion transport network at the GB that significantly improves the total ionic conductivity. Lithium penetration within LLZO is suppressed and an all-solid-state LiFePO4 /LAO-LLZOF/Li battery stably cycled for 5500 cycles at 3 C. This work reveals the chemistry of Li2 CO3 at the LLZO GBs during cycling, presents a novel lithium penetration mechanism within garnet electrolytes, and provides an innovative method to simultaneously regulate the ion and electron transport at the GBs in garnet electrodes for advanced ASLMBs.
RESUMEN
Flexible Zn-air batteries (FZABs) have significant potentials as efficient energy storage devices for wearable electronics because of their safeties and high energy-to-cost ratios. However, their application is limited by their short cycle lives, low discharge capacities per cycle, and high charge/discharge polarizations. Accordingly, herein, a poly(sodium acrylate)-polyvinyl alcohol (PANa-PVA)-ionic liquid (IL) hydrogel (PANa-PVA-IL) is prepared using a hygroscopic IL, 1-ethyl-3-methylimidazolium chloride, as an additive for twin-chain PANa-PVA. PANa-PVA-IL exhibits a high conductivity of 306.9 mS cm-1 and a water uptake of 2515 wt% at room temperature. Moreover, a low-cost bifunctional catalyst, namely, Co9 S8 nanoparticles anchored on N- and S-co-doped activated carbon black pearls 2000 (Co9 S8 -NSABP), is synthesized, which demonstrates a low O2 reversibility potential gap of 0.629 V. FZABs based on PANa-PVA-IL and Co9 S8 -NSABP demonstrate high discharge capacities of 1.67 mAh cm-2 per cycle and long cycle lives of 330 h. Large-scale flexible rechargeable Zn-air pouch cells exhibit total capacities of 1.03 Ah and energy densities of 246 Wh kgcell -1 . This study provides new information about hydrogels with high ionic conductivities and water uptakes and should facilitate the application of FZABs in wearable electronics.
RESUMEN
Ethylene carbonate (EC) in the electrolyte is not stable in cells operated at high voltage (≥4.4V) or with Li metal anode, which greatly reduce the energy density and lifetime of the rechargeable lithium battery. Herein, an EC-free linear alkyl carbonate-based electrolyte is developed, which enables the high-voltage (≥4.4V) and low-temperature (-30°C) application of Ni-rich cathode (LiNi0.8Mn0.1Co0.1O2, NCM811). The EC-free system, consisting of LiPF6 and LiNO3 in ternary linear alkyl carbonates, possesses low viscosity, weakly solvated structure, and high interfacial stability with both the Ni-rich cathode and the Li metal anode to avoid continuous electrode/electrolyte side reactions and metal dissolution from the cathode. As a result, the Li||NCM811 cell delivers remarkable capacity retention of 93 ± 0.5% at the voltage of 4.4V and 88 ± 0.6% at 4.5V over 100 cycles. This study provides very encouraging perspective to develop EC-free carbonate-based electrolyte for high-voltage and low-temperature application in high-energy-density rechargeable lithium batteries.
RESUMEN
Ceramic electrolytes are important in ceramic-liquid hybrid electrolytes (CLHEs), which can effectively solve the interfacial issues between the electrolyte and electrodes in solid-state batteries and provide a highly efficient Li-ion transfer for solid-liquid Li metal batteries. Understanding the ionic transport mechanisms in CLHEs and the corresponding role of ceramic electrolytes is crucial for a rational design strategy. Herein, the Li-ion transfer in the ceramic electrolytes of CLHEs was confirmed by tracking the 6Li and 7Li substitution behavior through solid-state nuclear magnetic resonance spectroscopy. The ceramic and liquid electrolytes simultaneously participate in Li-ion transport to achieve highly efficient Li-ion transfer in CLHEs. A spontaneous Li-ion exchange was also observed between ceramic and liquid electrolytes, which serves as a bridge that connects the ceramic and liquid electrolytes, thereby greatly strengthening the continuity of Li-ion pathways in CLHEs and improving the kinetics of Li-ion transfer. The importance of an abundant solid-liquid interface for CLHEs was further verified by the enhanced electrochemical performance in LiFePO4/Li and LiNi0.8Co0.1Mn0.1O2/Li batteries from the generated interface. This work provides a clear understanding of the Li-ion transport pathway in CLHEs that serves as a basis to build a universal Li-ion transport model of CLHEs.