RESUMEN
AIMS: The Ponseti method is an effective evidence-based treatment for clubfoot. It uses gentle manipulation to adjust the position of the foot in serial treatments towards a more physiological position. Casting is used to hold the newly achieved position. At first, the foot resists the new position imposed by the plaster cast, pressing against the cast, but over time the tissues are expected to adapt to the new position and the force decreases. The aim of this study was to test this hypothesis by measuring the forces between a clubfoot and the cast during treatment with the Ponseti method. PATIENTS AND METHODS: Force measurements were made during the treatment of ten idiopathic clubfeet. The mean age of the patients was seven days (2 to 30); there were nine boys and one girl. Force data were collected for several weeks at the location of the first metatarsal and the talar neck to determine the adaptation rate of the clubfoot. RESULTS: In all measurements, the force decreased over time. The median (interquartile range) half-life time was determined to be at 26 minutes (20 to 53) for the first metatarsal and 22 minutes (9 to 56) for the talar neck, suggesting that the tissues of the clubfoot adapt to the new position within several hours. CONCLUSION: This is the first study to provide objective force data that support the hypothesis of adaptation of the idiopathic clubfoot to the new position imposed by the cast. We showed that the expected decrease in corrective force over time does indeed exist and adaptation occurs after a relatively short period of time. The rapid reduction in the forces acting on the foot during treatment with the Ponseti method may allow significant reductions in the interval between treatments compared with the generally accepted period of one week.
Asunto(s)
Moldes Quirúrgicos , Pie Equinovaro/terapia , Medicina Basada en la Evidencia/métodos , Manipulación Ortopédica/métodos , Femenino , Humanos , Recién Nacido , Masculino , Resultado del TratamientoRESUMEN
BACKGROUND: Clubfeet are commonly treated using the Ponseti method. This method involves weekly manipulation and casting which gradually corrects the position of the foot. However, the reasons for following a weekly interval are not clear. QUESTION / PURPOSE: The aim is to investigate the influence of the cast change interval on treatment outcomes in the Ponseti method. METHODS: We performed a systematic review of comparative studies in which the cast change interval was varied. Scientific databases were searched for relevant publications, screened for eligibility and assessed for a risk of bias. A 'best evidence' synthesis tool was used to synthesize the results of the included studies and draw conclusions from relevant clinical outcomes. RESULTS: Nine papers matched the inclusion criteria, which provided data of 587 subjects who had a total of 870 clubfeet. There is strong evidence for a positive relation between cast change interval and treatment duration. However, there is no evidence for any relation between the cast change interval and the required number of casts, tenotomy rate, required surgery or failure rate. CONCLUSIONS: Accelerated versions are as effective and safe as the traditional Ponseti method. However, more research is needed to assess the long-term results and to identify an optimal cast change interval.
Asunto(s)
Moldes Quirúrgicos , Pie Equinovaro/terapia , Humanos , Factores de TiempoRESUMEN
The Ponseti method is the accepted treatment of idiopathic clubfoot. Although the method of manipulating the baby feet is described in great detail, current study aimed to investigate the magnitude and course of the applied forces in order to optimise the treatment of clubfoot. An instrumented clubfoot model was constructed with force sensors on the location of the first metatarsal (FM) and the talar neck (TN) and treated with the Ponseti method by 17 practitioners. Applied forces on FM and TN were measured during manipulation (4.2N; 12N), during casting (3.2N; 3.5N) and after casting (2.9N; 2.2N). The forces during manipulation were significantly higher than during casting on TN (p<0.001) but not on FM (p=0.129). No 'correct' amount of force could be determined and inter-practitioner variability was measured to be 70%. The resulting pressure of the cast on the clubfoot model as measured directly after casting was significantly higher than local tissue perfusion. The results of this study suggest potential for the optimisation of the application of the Ponseti method.
Asunto(s)
Moldes Quirúrgicos , Pie Equinovaro/cirugía , Modelos Anatómicos , Procedimientos Ortopédicos/métodos , Pie/patología , Humanos , LactanteRESUMEN
Osteoarthritis (OA) is a slowly progressive joint disease. Joint distraction can be a treatment of choice in case of severe OA. Prediction of failure will facilitate implementation of joint distraction in clinical practice. Patients with severe ankle OA, who underwent joint distraction were included. Survival analysis was performed over 12 years (n = 25 after 12 years). Regression analyses were used to predict failures and clinical benefit at 2 years after joint distraction (n = 111). Survival analysis showed that 44% of the patients failed, 17% within 2 years and 37% within 5 years after joint distraction (n = 48 after 5 years). Survival analysis in subgroups showed that the percentage failure was only different in women (30% after 2 years) versus men (after 11 years still no 30% failure). In the multivariate analyses female gender was predictive for failure 2 years after joint distraction. Gender and functional disability at baseline predicted more pain. Functional disability and pain at baseline were associated with more functional disability. Joint distraction shows a long-term clinical beneficial outcome. However, failure rate is considerable over the years. Female patients have a higher chance of failure during follow-up. Unfortunately, not all potential predictors could be investigated and other clinically significant predictors were not found.
Asunto(s)
Articulación del Tobillo/fisiopatología , Articulación del Tobillo/cirugía , Osteoartritis/fisiopatología , Osteoartritis/cirugía , Osteogénesis por Distracción/métodos , Adulto , Evaluación de la Discapacidad , Femenino , Estudios de Seguimiento , Humanos , Masculino , Persona de Mediana Edad , Análisis Multivariante , Valor Predictivo de las Pruebas , Estudios Prospectivos , Recuperación de la Función , Análisis de Regresión , Índice de Severidad de la Enfermedad , Análisis de Supervivencia , Resultado del TratamientoAsunto(s)
Alcaptonuria/complicaciones , Artropatías/etiología , Trastornos de la Pigmentación/etiología , Enfermedades de la Esclerótica/etiología , Anciano , Artritis Reumatoide/complicaciones , Artritis Reumatoide/cirugía , Calcinosis/diagnóstico por imagen , Cartílago Articular , Femenino , Humanos , Artropatías/patología , Ligamentos Articulares , Radiografía , Enfermedades de la Esclerótica/patología , Enfermedades de la Columna Vertebral/diagnóstico por imagen , Membrana SinovialRESUMEN
The ligaments of the knee consist of fiber bundles with variable orientations, lengths and mechanical properties. In concept, however, these structures were too often seen as homogeneous structures, which are either stretched or slack during knee motions. In previous studies, we proposed a new structural concept of the ligaments of the knee. In this concept, the ligaments were considered as multi-bundle structures, with nonuniform mechanical properties and zero force lengths. The purpose of the present study was to verify this new concept. For this purpose, laxity characteristics of a human knee joint were compared as measured in an experiment and predicted in a model simulation study. In the experiment, the varus-valgus and anterior-posterior laxities of a knee-joint specimen containing the ligaments and the articular surfaces only, were determined. From this knee-joint, geometric and mechanical parameters were derived to supply the parameters for a three-dimensional quasi-static knee-joint model. These parameters included (i) the three-dimensional insertion points of bundles, defined in the four major knee ligaments, (ii) the mechanical properties of these ligament, as functions of their relative insertion orientations and (iii) three-dimensional representations of the articular surfaces. With this model the experiments were simulated. If knee-model predictions and experimental results agree, then the multi-bundle ligament models are validated, at least with respect to their functional role in anterior-posterior and varus-valgus loading of the joint. The model described the laxity characteristics in AP-translation and VV-rotation of the cadaveric knee-joint specimen reasonably well. Both display the same patterns of laxity changes during knee flexion. Only if a varus moment of 8 N m was applied and if the tibia was posteriorly loaded, did the model predict a slightly higher laxity than that measured experimentally. From the model-experiment comparisons it was concluded that the proposed structural representations of the ligaments and their mechanical property distributions seem to be valid for studying the anterior-posterior and varus-valgus laxity characteristics of the human knee-joint.
Asunto(s)
Articulación de la Rodilla/fisiología , Ligamentos Articulares/fisiología , Modelos Biológicos , Fenómenos Biomecánicos , Cadáver , Simulación por Computador , Fémur/patología , Fémur/fisiopatología , Humanos , Inestabilidad de la Articulación/patología , Inestabilidad de la Articulación/fisiopatología , Articulación de la Rodilla/anatomía & histología , Ligamentos Articulares/anatomía & histología , Reproducibilidad de los Resultados , Rotación , Estrés Mecánico , Tibia/patología , Tibia/fisiopatología , TorqueRESUMEN
Twenty-five total hip arthroplasties were performed in 25 patients using a femoral stem with a soft-interface coating of Proplast (Vitek, Houston, TX). Follow-up periods for 24 of the hips ranged from 82 to 104 months (median, 96 months). Fourteen (58%) of the hips were judged to be failures, and nine of the failures were revised. The prostheses were thought to have failed because the coating was not strong enough to withstand normal weight-bearing loads. This inner-substance failure of the coating was seen in all revision operations. During these revisions, parts of the coating remained in the shaft as well as on the prosthesis stem. The combination of clinically manifest midthigh pain and radiologic scalloping and/or the pedestal sign seem to justify a strong suspicion of looseness of this type of cementless femoral endoprosthesis.