RESUMEN
OBJECTIVE: Patients with cancer have antibodies against tumour antigens. Characterising the antibody repertoire may provide insights into aberrant cellular mechanisms in cancer development, ultimately leading to novel diagnostic or therapeutic targets. The aim of this study was to characterise the antibody profiles in patients whose symptoms warranted colonoscopy, to see if there was a difference in patients with and without colorectal cancer. METHODS: Patients were recruited from a colonoscopy clinic. Individual serum samples from 43 patients with colorectal cancer and 40 patients with no cancer on colonoscopy were profiled on a 37 830 clone recombinant human protein array. Antigen expression was evaluated by quantitative reverse transcription-PCR and by immunohistochemistry on tissue microarrays. RESULTS: Using a sex- and age-matched training set, 18 antigens associated with cancer and 4 associated with the absence of cancer (p<0.05) were identified and confirmed. To investigate the mechanisms triggering antibody responses to these antigens, antigen expression was examined in normal colorectal mucosa and colorectal carcinoma of the same patients. The identified antigens showed cellular accumulation (p53), aberrant cellular expression (high mobility group B1 (HMGB1)) and overexpression (tripartite motif-containing 28 (TRIM28), p53, HMGB1, transcription factor 3 (TCF3), longevity assurance gene homologue 5 (LASS5) and zinc finger protein 346 (ZNF346)) in colorectal cancer tissue compared with normal colorectal mucosa. CONCLUSIONS: It is demonstrated for the first time that screening high-density protein arrays identifies unique antibody profiles that discriminate between symptomatic patients with and without colorectal cancer. The differential expression of identified antigens suggests their involvement in aberrant cellular mechanisms in cancer.
Asunto(s)
Anticuerpos Antineoplásicos/sangre , Biomarcadores de Tumor/sangre , Neoplasias Colorrectales/diagnóstico , Inmunoglobulina G/sangre , Anciano , Antígenos de Neoplasias/inmunología , Antígenos de Neoplasias/metabolismo , Colonoscopía , Femenino , Perfilación de la Expresión Génica/métodos , Humanos , Mucosa Intestinal/inmunología , Masculino , Persona de Mediana Edad , Análisis de Secuencia por Matrices de Oligonucleótidos/métodos , Estudios Prospectivos , Reacción en Cadena de la Polimerasa de Transcriptasa Inversa/métodosRESUMEN
We report herein the detection of liquid water dissolved in a variety of solvents using a thermoelectrically cooled, pulsed, Fabry-Perot quantum cascade laser, operating at 5.629 microm at room temperature. The prototype sensor system consisted of the laser, a series of off-axis parabolic mirrors, and two mercury cadmium telluride detectors. When applied to the detection of water in tetrahydrofurane, a limit of detection of 0.85 parts per million was achieved. It is envisaged that such a sensor would be well suited to process control applications within the pharmaceuticals industry.
Asunto(s)
Química Farmacéutica/métodos , Láseres de Semiconductores , Solventes/química , Tecnología Farmacéutica/métodos , Agua/análisis , Química Farmacéutica/instrumentación , Furanos/química , Humanos , Espectrofotometría Infrarroja/métodos , Tecnología Farmacéutica/instrumentaciónRESUMEN
The detection of oxygen in breath is of central importance to investigations of metabolism and respiration in both clinical and athletic performance monitoring applications. This paper reports the development of a portable, lightweight optical oxygen sensor that is intended to provide a breath oxygen monitoring solution that is deployable outside a laboratory environment. The sensing methodology is based on the detection of changes in the fluorescence emission of an oxygen-sensitive fluorescent dye. The novelty of the system stems from the humidity-insensitive nature of the oxygen sensor, the highly efficient and compact optical configuration and the use of a novel, wearable control unit based on DSP circuitry. These components combine to provide a portable breath oxygen monitor that can detect changes in the in-breath O(2) concentration profile in real-time over a broad range of breathing rates in situations of both rest and exercise. The reported system is expected to have a significant impact on point-of-care (POC) breath-based diagnostics and high performance athletic monitoring.
RESUMEN
A poly(dimethylsiloxane) (PDMS) coated sapphire fiber has been investigated as a sensor for hydrocarbons (HCs) in the mid-infrared region around 3000 cm(-1). In order to optimize and predict sensor response, the diffusion behavior of the analytes into the PDMS preconcentration medium has been examined. A diffusion model based on Fickian diffusion was used to quantify diffusion. The model incorporated such factors as film thickness, refractive index of the polymer and the fiber core, and principal wavelength at which the analyte absorbs. A range of hydrocarbons, from hexane to pentadecane, was analyzed at 2930 cm(-1) using both fiber-coupled Fourier transform infrared spectroscopy and a modular prototype system. Diffusion coefficients were determined for these compounds and diffusion behavior examined and related to factors such as analyte polarity and molecular size. The diffusion coefficients were found to range from 6.41 x 10(-11) 5 x 10(-12) to 5.25 x 10(-11) +/- 9 x 10(-13) cm2 s(-1) for hexane and pentadecane into a 2.9 microm PDMS film, respectively. The diffusion model was also used to examine the effect of changing system parameters such as film thickness in order to characterize sensor response.
Asunto(s)
Óxido de Aluminio , Materiales Biocompatibles Revestidos/química , Dimetilpolisiloxanos , Tecnología de Fibra Óptica/instrumentación , Hidrocarburos/análisis , Siliconas , Espectroscopía Infrarroja por Transformada de Fourier/instrumentación , Transductores , Materiales Biocompatibles Revestidos/síntesis química , Simulación por Computador , Difusión , Diseño de Equipo , Análisis de Falla de Equipo , Hidrocarburos/química , Materiales Manufacturados , Modelos Químicos , Espectroscopía Infrarroja por Transformada de Fourier/métodosRESUMEN
Surface plasmon resonance (SPR)-based biosensors were investigated with a view to providing a portable, inexpensive alternative to existing technologies for "real-time" biomolecular interaction analysis of whole cell-ligand interactions. A fiber optic SPR-based (FOSPR) biosensor, employing wavelength-dependent SPR, was constructed to enable continuous real-time data acquisition. In addition, a commercially available integrated angle-dependent SPR-based refractometer (ISPR) was modified to facilitate biosensing applications. Solid-phase detection of whole red blood cells (RBCs) using affinity-captured blood group specific antibodies was demonstrated using the BIACORE 1000, BIACORE Probe, FOSPR, and ISPR sensors. Nonspecific binding of RBCs to the hydrogel-based biointerface was negligible. However, the background noise level of the FOSPR-based biosensor was approximately 25-fold higher than that of the widely used BIACORE 1000 system while that of the ISPR-based biosensor was over 100-fold higher. Nevertheless, the FOSPR biosensor was suitable for the analysis of macromolecular analytes contained in crude matrices.
Asunto(s)
Técnicas Biosensibles , Membrana Eritrocítica/metabolismo , Fusión de Membrana , Resonancia por Plasmón de Superficie/instrumentación , Calibración , Humanos , LigandosRESUMEN
A rigorous theory of radiation from dipoles embedded inside an arbitrary multilayer system is presented. In particular, we derive explicit expressions for the angular distribution of the electromagnetic field and the intensity radiated by the dipole into the surrounding media. Under the assumptions of mutual incoherence of the dipole radiation the calculations are extended to a layer of radiating dipoles. Special configurations corresponding to (i) a single dipole near a dielectric interface, (ii) a dipole layer surrounded by semi-infinite dielectric media, and (iii) a dipole layer placed on top of a waveguide layer are discussed in detail. This theoretical analysis has important consequences for the optimization of optical chemical sensors and biosensors that are based on fluorescence emission.
RESUMEN
Nitrite is an important human health and environmental analyte. As such, the European Union (EU) has imposed a limit for nitrite in potable water of 0.1 mg l-1 (2.18 microM). In order to develop an optical biosensing system for the determination of nitrite ions in environmental waters, cytochrome cd1 nitrite reductase has been extracted and purified from the bacterium Paracoccus pantotrophus. The protein has been spectroscopically characterised in solution and important kinetic parameters of nitrite reduction of the cytochrome cd1 enzyme, i.e., Km, Vmax and kcat have been determined. The influence of pH on the activity of the cytochrome cd1 has been investigated and the results suggest that this enzyme can be used for the determination of nitrite in the pH range 6-9. Biosensing experiments with the cytochrome cd1 in solution suggested that the decrease in intensity of the absorption band associated with the d1 haem (which is the nitrite binding site), at 460 nm, with increasing nitrite concentrations would enable the measurement of this analyte with the optimum limit of detection. The cytochrome cd1 has been encapsulated in a bulk sol-gel monolith with no structural changes observed and retention of enzymatic activity. The detection of nitrite ions in the range 0.075-1.250 microM was achieved, with a limit of detection of 0.075 microM. In order to increase the speed of response, a sol-gel sandwich thin film structure was formulated with the cytochrome cd1. This structure enabled the determination of nitrite concentrations within ca. 5 min. The sol-gel sandwich entrapped cytochrome cd1 enzyme was found to be stable for several months when the films were stored at 4 degrees C.
Asunto(s)
Complejo IV de Transporte de Electrones , Nitrito Reductasas , Nitritos/análisis , Contaminantes Químicos del Agua/análisis , Técnicas Biosensibles , Citocromos , GelesRESUMEN
The array biosensor was fabricated to analyze multiple samples simultaneously for multiple analytes. The sensor utilized a standard sandwich immunoassay format: Antigen-specific "capture" antibodies were immobilized in a patterned array on the surface of a planar waveguide and bound analyte was subsequently detected using fluorescent tracer antibodies. This study describes the analysis of 126 blind samples for the presence of three distinct classes of analytes. To address potential complications arising from using a mixture of tracer antibodies in the multianalyte assay, three single-analyte assays were run in parallel with a multianalyte assay. Mixtures of analytes were also assayed to demonstrate the sensor's ability to detect more than a single species at a time. The array sensor was capable of detecting viral, bacterial, and protein analytes using a facile 14-min assay with sensitivity levels approaching those of standard ELISA methods. Limits of detection for Bacillus globigii, MS2 bacteriophage, and staphylococcal enterotoxin B (SEB) were 10(5) cfu/mL, 10(7) pfu/mL, and 10 ng/mL, respectively. The array biosensor also analyzed multiple samples simultaneously and detected mixtures of the different types of analytes in the multianalyte format.
Asunto(s)
Anticuerpos/análisis , Antígenos Bacterianos/análisis , Antígenos Virales/análisis , Técnicas Biosensibles , Ensayo de Inmunoadsorción Enzimática , Sensibilidad y EspecificidadRESUMEN
The realisation of an opto-chemical ammonia sensor suitable for personal monitoring tasks is described, comprising a cyanine dye immobilised in a microporous glass thin film. The fabrication of sensor platforms incorporating embossed grating couplers provides a compact optical design with effective waveguiding characteristics, resulting in reversible ammonia sensitivity in the 5-100 ppm range in under 2 min. Cross-sensitivity of sensor response with water and other potential interferents is considered.
Asunto(s)
Contaminación del Aire Interior/análisis , Amoníaco/análisis , Monitoreo del Ambiente/instrumentación , Exposición Profesional , Diseño de Equipo , Humanos , Óptica y Fotónica , Sensibilidad y EspecificidadRESUMEN
Optical and fluidics systems have been developed as central components for an automated array biosensor. Disposable planar waveguides are patterned with immobilized capture antibodies using a physically isolated patterning (PIP) method. The PIP method enables simultaneous deposition of several antibodies and completely circumvents cross-immobilization problems encountered with other array deposition processes. A multi-channel fluidics cell allows numerous assays to be performed on the patterned waveguide. The sensing arrays are optically interrogated using a diode laser with a tailored output to optimize coupling to and maximize excitation uniformity within the waveguide. A patterned cladding is employed to optically isolate the waveguide from perturbations induced by the permanently attached flow cells. Compact optics image the evanescently excited fluorescence onto a large area, cooled CCD array. The image data is processed and automated signal analysis corrects for local background and noise variations.
RESUMEN
Sol-gel-based optical sensors for both gas-phase and dissolved oxygen have been developed. Both sensors operate on the principle of fluorescence quenching of a ruthenium complex which has been entrapped in a porous sol-gel silica film. A comprehensive investigation was carried out in order to establish optimal film-processing parameters for the two sensing environments. Both tetraethoxysilane and organically modified sol-gel precursors such as methyltriethoxysilane and ethyltriethoxysilane were used. Film hydrophobicity increases as a function of modified precursor content, and this was correlated with enhanced dissolved oxygen (DO) sensor performance. Extending the aliphatic group of the modified precursor further improved DO sensitivity. The influence of water/precursor molar ratio, R, on the sol-gel film microstructure was investigated. R value tailoring of the microstructure and film surface hydrophobicity tailoring were correlated with oxygen diffusion behavior in the films via the Stern-Volmer constants for both gas phase and DO sensing. Excellent performance characteristics were measured for both gas-phase and DO oxygen sensors. The long-term quenching stability of DO sensing films was established over a period of 6 months.