RESUMEN
High-performance thermal insulators represented by aerogels are regarded as one of the most promising materials for energy savings. However, significantly low mechanical strength has been a barrier for aerogels to be utilized in various social domains such as houses, buildings, and industrial plants. Here, we report a synthetic strategy to realize highly transparent aerogels with unusually high bending flexibility based on poly(methylsilsesquioxane) (PMSQ) network. We have constructed mesoscopic fine fiber-like structures of various sizes in PMSQ gels by the combination of phase separation suppression by tetramethylammonium hydroxide (TMAOH) and mesoscopic fiber-like assembly by nonionic poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-b-PPO-b-PEO) type surfactant. The optimized mesoscale structures of PMSQ gels have realized highly transparent and resilient monolithic aerogels with much high bendability compared to those reported in previous works. This work will provide a way to highly insulating materials with glasslike transparency and high mechanical flexibility.
RESUMEN
We utilized nanoporous mayenite (12CaO·7Al2O3), a cost-effective material, in the hydride state (H-) to explore the possibility of its use for hydrogen storage and transportation. Hydrogen desorption occurs by a simple reaction of mayenite with water, and the nanocage structure transforms into a calcium aluminate hydrate. This reaction enables easy desorption of H- ions trapped in the structure, which could allow the use of this material in future portable applications. Additionally, this material is 100% recyclable because the cage structure can be recovered by heat treatment after hydrogen desorption. The presence of hydrogen molecules as H- ions was confirmed by 1H-NMR, gas chromatography, and neutron diffraction analyses. We confirmed the hydrogen state stability inside the mayenite cage by the first-principles calculations to understand the adsorption mechanism and storage capacity and to provide a key for the use of mayenite as a portable hydrogen storage material. Further, we succeeded in introducing H- directly from OH- by a simple process compared with previous studies that used long treatment durations and required careful control of humidity and oxygen gas to form O2 species before the introduction of H-.
RESUMEN
We explored the effects of gas emission by mixtures undergoing alkali-activation of municipal solid waste incineration fly ash (MSWIFA) and pyrophyllite (the mixtures included dehydrated pyrophyllite, MSWIFA, 14â¯mol/L aqueous sodium hydroxide, and sodium silicate; curing proceed at 105⯰C for 24â¯h). We measured the compressive strengths of the derived solid composites. The causes of gas emission, and the physical and chemical properties of products created under controlled gas emission, were investigated. Hydrogen was emitted after mixing MSWIFA and alkali. The compressive strength of products prepared when gas emission was complete was 2-3.4-fold greater than that of products prepared when gas emission was incomplete. X-ray micro-tomography and mercury intrusion porosimetry showed that products formed during complete gas emission tended to have smaller pores. X-ray diffraction and nuclear magnetic resonance (27Al and 29Si) indicated that the aluminum substitution levels in tectosilicate differed under such conditions, although the minerals were identical. Thus, complete gas emission after mixing improved ultimate products.
Asunto(s)
Silicatos de Aluminio/química , Ceniza del Carbón/química , Incineración/métodos , Industria del Petróleo y Gas/métodos , Residuos Sólidos/análisis , Carbono/químicaRESUMEN
Aerogels are porous materials but show poor mechanical properties and limited functionality, which significantly restrict their practical applications. Preparation of highly bendable and processable aerogels with multifunctionality remains a challenge. Herein we report unprecedented superflexible aerogels based on polyvinylpolydimethylsiloxane (PVPDMS) networks, PVPDMS/polyvinylpolymethylsiloxane (PVPMS) copolymer networks, and PVPDMS/PVPMS/graphene nanocomposites by a facile radical polymerization/hydrolytic polycondensation strategy and ambient pressure drying or freeze drying. The aerogels have a doubly cross-linked organic-inorganic network structure consisting of flexible polydimethylsiloxanes and hydrocarbon chains with tunable cross-linking density, tunable pore size and bulk density. They have a high hydrophobicity and superflexibility and combine selective absorption, efficient separation of oil and water, thermal superinsulation, and strain sensing.
RESUMEN
Aerogels have many attractive properties but are usually costly and mechanically brittle, which always limit their practical applications. While many efforts have been made to reinforce the aerogels, most of the reinforcement efforts sacrifice the transparency or superinsulating properties. Here we report superflexible polyvinylpolymethylsiloxane, (CH2CH(Si(CH3)O2/2))n, aerogels that are facilely prepared from a single precursor vinylmethyldimethoxysilane or vinylmethyldiethoxysilane without organic cross-linkers. The method is based on consecutive processes involving radical polymerization and hydrolytic polycondensation, followed by ultralow-cost, highly scalable, ambient-pressure drying directly from alcohol as a drying medium without any modification or additional solvent exchange. The resulting aerogels and xerogels show a homogeneous, tunable, highly porous, doubly cross-linked nanostructure with the elastic polymethylsiloxane network cross-linked with flexible hydrocarbon chains. An outstanding combination of ultralow cost, high scalability, uniform pore size, high surface area, high transparency, high hydrophobicity, excellent machinability, superflexibility in compression, superflexibility in bending, and superinsulating properties has been achieved in a single aerogel or xerogel. This study represents a significant progress of porous materials and makes the practical applications of transparent flexible aerogel-based superinsulators realistic.
RESUMEN
Reactions of chloromethyltrimethoxysilane (CMTMS) and its derived colloidal network polychloromethylsilsesquioxane (PCMSQ) have been investigated to extend the material design strategy toward functionalized and mechanically reinforced aerogels. In a carefully designed sol-gel system, CMTMS has afforded transparent aerogels in the presence of cationic surfactant. The surface chloromethyl groups with polarity and reactivity are shown to be useful for supporting nanostructures, with photoluminescent carbon dots (C-dots) prepared from polyethylenimine and citric acid as an example. Furthermore, since nucleophilic substitution (SN2) reactions on the surface chloromethyl groups are found to control the equilibrium of formation/dissociation of siloxane bonds, a new gelation strategy triggered by SN2 reactions in sol-gel has been developed. In the presence of nucleophilic organic species such as polyamines, a hybrid network consisting of PCMSQ cross-linked with a polyamine nucleophile can be prepared to enhance mechanical properties of aerogel.
RESUMEN
Transparent, low-density ethenylene-bridged polymethylsiloxane [Ethe-BPMS, O2/2(CH3)Si-CHâCH-Si(CH3)O2/2] aerogels from 1,2-bis(methyldiethoxysilyl)ethene have successfully been synthesized via a sol-gel process. A two-step sol-gel process composed of hydrolysis under acidic conditions and polycondensation under basic conditions in a liquid surfactant produces a homogeneous pore structure based on cross-linked nanosized colloidal particles. Visible-light transmittance of the aerogels varies with the concentration of the base catalyst and reaches as high as 87% (at a wavelength of 550 nm for a 10 mm thick sample). Gelation and aging temperature strongly affect the deformation behavior of the resultant aerogels against uniaxial compression, and the obtained aerogels prepared at 80 °C show high elasticity after being unloaded. This highly resilient behavior is primarily derived from the rigidity of ethenylene groups, which is confirmed by a comparison with other aerogels with similar molecular structures, ethylene-bridged polymethylsiloxane and polymethylsilsesquioxane. Applicability of the addition reaction using a Diels-Alder reaction of benzocyclobutene has also been investigated, revealing that a successful addition takes place on the ethenylene linkings, which is verified using Raman and solid-state NMR spectroscopies. Insights into the effect of molecular structure on mechanical properties and the availability of surface functionalization provided in this study are important for realizing transparent aerogels with the desired functionality.
RESUMEN
Polymethylhydrosiloxane has been grafted on the surface of a hierarchically porous silica monolith using a facile catalytic reaction between Si-H and silanol to anchor the polymer. This easy methodology leads to the functionalization of the surface of a silica monolith, where a large amount of free Si-H bonds remain available for reducing metal ions in solution. Palladium nanoparticles of 15 nm have been synthesized homogeneously inside the mesopores of the monolith without any stabilizers, using a flow of a solution containing Pd2+. This monolith was used as column-type fixed bed catalyst for continuous flow hydrogenation of styrene and selective hydrogenation of 3-hexyn-1-ol, in each case without a significant decrease of the catalytic activity after several hours or days. Conversion, selectivity, and stereoselectivity of the alkyne hydrogenation can be tuned by flow rates of hydrogen and the substrate solution, leading to high productivity (1.57 mol g(Pd)-1 h-1) of the corresponding cis-alkene.
RESUMEN
Transparent, monolithic aerogels with nanosized colloidal skeletons have been obtained from a single precursor of 1,2-bis(methyldiethoxysilyl)ethane (BMDEE) by adopting a liquid surfactant and a two-step process involving strong-acid, followed by strong-base, sol-gel reactions. This precursor BMDEE forms the ethylene-bridged polymethylsiloxane (EBPMS, O2/2(CH3)Si-CH2CH2-Si(CH3)O2/2) network, in which each silicon has one methyl, two bridging oxygens, and one bridging ethylene, exhibiting an analogous structure to that of the previously reported polymethylsilsesquioxane (PMSQ, CH3SiO3/2) aerogels having one methyl and three bridging oxygen atoms. Obtained aerogels consist of fine colloidal skeletons and show high visible-light transparency and a flexible deformation behavior against compression without collapse. Similar to the PMSQ aerogels, a careful tuning of synthetic conditions can produce low-density (0.19 g cm-3) and highly transparent (76% at 550 nm, corresponding to 10 mm thick samples) xerogels via ambient pressure drying by solvent evaporation due to their high strength and resilience against compression. Moreover, EBPMS aerogels exhibit higher bending strength and bending strain at break against the three-point bending mode compared to PMSQ aerogels. This improved bendability is presumably derived from the introduced ethylene-bridging parts, suggesting the potential for realizing transparent and bendable aerogels in such polysiloxane materials with organic linking units.
RESUMEN
Polymethylsilsesquioxane-cellulose nanofiber (PMSQ-CNF) composite aerogels have been prepared through sol-gel in a solvent containing a small amount of CNFs as suspension. Since these composite aerogels do not show excessive aggregation of PMSQ and CNF, the original PMSQ networks are not disturbed. Composite aerogels with low density (0.020 g cm(-3) at lowest), low thermal conductivity (15 mW m(-1) K(-1)), visible light translucency, bending flexibility, and superhydrophobicity thus have been successfully obtained. In particular, the lowest density and bending flexibility have been achieved with the aid of the physical supporting effect of CNFs, and the lowest thermal conductivity is comparable with the original PMSQ aerogels and standard silica aerogels. The PMSQ-CNF composite aerogels would be a candidate to practical high-performance thermal insulating materials.